Cpu-nb voltage not changing for FM2-A75MA-E35

I have a FM2-A75MA-E35 with a A8-5600k amd cpu and I'm trying to increase the cpu-nb voltage. According to AMD overdrive its at 1.1875 and I'm trying to increase it but any voltage I select in bios is completely ignored for some reason. I even tried with the 1.33 beta bios. How do I adjust the voltage? Do I need a special program to accurately monitor the cpu-nb voltage or is it just not adjustable?

OK i tried the one memory stick in the first DIM everything powers on but it is not booting from the harddrive ive tried getting into the BIOS but it just goes black if i let it boot up this is what i get
EFI Shell version 2.31 [4.654]
current running mode 1.1.2
Device mapping table
fs0 :HardDisk - Alias hd13a65535a1 b1k0
PciRoot(0x0)/Pci (0x11)/Sata (0x0,0x0)/HD ( 1,MBR, 0x6583ff11, 0x32800,0x3a353000)
b1k0 :HardDisk - Alias hd13a65535a1 fs0
PciRoot(0x0)/Pci (0x11)/Sata (0x0,0x0)/HD ( 1,MBR, 0x6583ff11, 0x32800,0x3a353000)
b1k1 :BlockDevice - Alias (null)
PciRoot(0x0)/Pci (0x11)/Sata (0x0,0x0)
Press ESC in 1 seconds to skip startup.nsh, any other key to continue
Shell>_
I dont know what to do from here thanks again.

Similar Messages

Latest bios for FM2-A75MA-E35?

http://us.msi.com/product/mb/FM2-A75MA-E35.html#/?div=BIOS
The two latest bios are both v21. One is dated 6/05, the other 7/25. Anyone upgraded recently? Is the 7/25 just mislabeled (i.e., should be v22)?

Appears that the latest is just a simple update of 2.1 that didn't require a BIOS version number change - Update BIOS module. Whatever that actually means/does I don't know.

Bios 2.1 for FM2-A75MA-E35 - Experiences?

Has anyone upgraded to 2.1 successfully? I read here that someone is no longer able to use their USB ports at first boot since doing so with this board.
BTW, I'm using this with an A10-6800K (v2.0 BIOS). It does recognize the CPU, even though it's not "officially" supported. But for some reason it's not running it with a x41 multiplier and instead at x39. Not sure why. And the turbo clock of x44 never seems to kick in either even though it's properly set.
Never used an MSI board before, so maybe I diddled something.
Edit: the clock was hard set to x39 for the multiplier so set it to Auto. Also turned on the the AMD Turbo Boost as that had been disabled. The latter apparently has solved some power issues as now it's not running at full voltage for no reason. Before it was maxing out all the time around 100 watts when running Handbrake. Now with the same task it's around 50-60 watts and the fans are much happier they don't have to run as hard.

Appears that the latest is just a simple update of 2.1 that didn't require a BIOS version number change - Update BIOS module. Whatever that actually means/does I don't know.

Issues attempting to flash 2.0 BIOS on FM2-A75MA-E35

OK, so I'm planning to put a Richland APU into my FM2-A75MA-E35 as soon as these come out. In preparation for this, I've attempted to flash my BIOS to 2.0, which did not work.
Some background information, I've flashed the board before without issues, up to version 1.8. The process to flash 2.0 is entirely different now, in that you need to boot from a bootable usb stick, and then run E7721V20.exe.
This is what I did. It then went through some checks which passed fine, asked me to confirm whether I really wanted to flash the BIOS, to which I answered Y, it showed the message that it is now starting to flash the BIOS, and that's it.
It then remained in this state for a good hour before I finally drew the conclusion that this isn't doing anything. Even though it said not to switch it off while flashing the BIOS, it seemed to be my only option. I did, and luckily, all was working as previously, running version 1.8.
In short, the flashing program didn't actually do anything.
I am very reluctant to make another attempt at this point in time, because I'd much rather have the board in version 1.8 for the time being, than not have it work at all.
Is there anything I could have missed? Is there any way in which I can successfully flash my board to 2.0, so that I can later use a Richland APU in it?
Any help with this is appreciated!

I've done another search on the 1.8 BIOS and I can't find anything concerning Richland support. The description was just a generic "BIOS Update", whereas the 2.0 description is:
- Update CPU ID.
- Support Richland CPU.
To me, it looks like you need the 2.0 BIOS for Richland Support. If anyone could point me to any sources that the 1.8 BIOS already supports Richland APUs, I'd appreciate it. For now, I'll stick to my belief that you do need 2.0, until I've got evidence to the contrary.
Quote from: flobelix on 09-May-13, 20:50:34
Version 2.0 for FM2-A75MA-E35 like all Win8 bios versions for AMD boards currently can't be flashed with the forum tool. It's only possible by MSI's (risky) way.
And you can't even use M-Flash, like you can for all the 1.x versions. The only way to flash 2.0 seems to be to boot into DOS from a USB stick and then run the executable supplied by MSI. Will that likely remain the only way to flash to 2.x?
Quote from: florinbss2 on 09-May-13, 22:44:31
I did the update and it worked. But I have an annoying problem. When activating Cool'n'Quiet in the BIOS, it's not work on cooler. Change frequently but not speed CPU cooler. Any percentage would choose the speed cooler does not change. Cooler running at full speed.
Well, I was going to say that at least you managed to flash your board, but having the CPU fan run at full speed irrespective of BIOS settings doesn't sound all too good either, and you can't even flash back to 1.x now, or can you?

FM2-A75MA-E35 with A10-5700, CPU temperature at 85c!!! Is this normal?

I just put together the system, see below (no overclocking), and using AMD Overdrive for stability test with CPUID software to monitor temperature:
FM2-A75MA-E35
A10-5700 Boxed using stock fan
Patriot signature DDR3 8G 1333mhz
1T WD Greennnn..........
At room temperature about 25c
1. In BIOS, temperature after boot up jumps quickly from 25c to idle at 58c and the fan spinning at about 3200 RPM. It sounds like a small refrigerator.
2. Idle in Windows 7, CPUID displays CPU temp at 42c.
3. Stability test using AMD Overdrive with all components selected, CPU temp shoots up to MAX at 85c!!!!! average about 75c!
I found out that A10-5700 maximum temperature is 71c. I double check everything (connections and fan) and update the BIOS then run it again, the same results show up.
Is there anything wrong?
Darth

Quote from: darth_juon on 13-February-13, 02:03:41
Thanks Joe and wlahdone,
I am currently waiting for the new A10-5700 CPU.
Have you try the last BIOS version 1.7 (1/29/2013) with Update CPU AGESA code?
I also had BIOS problem.
BIOS version that come with the board, It hung when I try to save changes and exit. This issue has been reported by another user.
BIOS version 1.5, Solved the save changes problem.
*Both versions have the same funny temperature reading.
I don't want to spend much time with this, I only need a simple PC or two, just driving to the PC store gas cost a lot of money these days.
I had the same issues when i ve bought it - the freezing at save.
It seems the board comes with BIOS 1.2 which is bugged ,it simply takes the OC settings at the first boot and overclocks the FSB ,this giving the freezing most probable.
Clearing CMOS or pressing F6 and then F10 in BIOS solves the problem.
I am on BIOS 1.5 and it s ok.
The HW Monitor reports the 0 Celsius for the onboard video ,but i really don t care.
I ve thrown at it Windows XP ,Windows 7 ,Open SUSE 12 ,Linux Mint and Simply Mepis.
They all worked fine in spite of the little 5300 APU that i use for this HTPC , it runs everything
I ve made myself a toy that plays 1080p and routes in same time ,a pleasure to see it in action
After AMD releases the new APU-s ill switch from a AM3+ rig to one of these.
The board BIOS reports nice temps if you use a proper cooler.

M-Flash, FM2-A75MA-E35, System is not reboot or taking long time

Hi,
I have FM2-A75MA-E35 with A10-5700.
Several days ago, I downloaded a ZIP file of BIOS version 1.7 from MSI. After extracted, it was the same version 1.5 (.150 extension), but with older version of .EXE compared to my previous BIOS version 1.5 download.
After the flash screen ended, the system was not reboot almost right away like my previous 1.5 flashed, but with blank screen, fan running fully speed, and both HDD LED and Power LED lite up. About a minute late, I pressed Power with not respond then Reset also with no respond. Several seconds later, the system rebooted and Windows loaded. Later, I flashed the system back to previous 1.5 and everything seemed to be OK. Yesterday, I checked MSI site and saw that the actual 1.7 BIOS is up, I am thinking about flashing again.
Here are my questions:
What is going on after the flash screen ended?
Is it save to 1) press power or 2) reset button or 3) pull the plug after the flash screen ended, If the system is not reboot or responding for about a minute?

I flashed it the same way that I did with the early weird 1.7 version and it was working.
After flash progress bar completed, it took about less than 5 seconds, the system rebooted twice with all the LEDs turn on and off and windows loaded. I rebooted and went into the BIOS which shown version 1.7.
The scary thing was when I was in the BIOS setting the clock, the screen went blank for about a second once and sometime blinking , and it seemed to do that on the clock setting screen, not the main screen. I think this might related to graphic buffering and programing.
I hope this is normal for this UEFI BIOS and not turns into a brick.
Please, let me known that if you think this is normal or not.
Thanks,

Preference status not changed for the processed products

Hello All,
While Aggregating the vendor declaration, I am getting the message as below
Preference status not changed for the processed products
Could you please help me to resolve this issue.
Thanks & Regards
Rahul

Hello Rahul,
aggregation is not changing status on LTVD. (Possibly LTVD has been already agregated). Newly maintained LTVD is not changing status of the product, its remaining negative whatsoever.
Kr,
Gabriel.

Cursor does not change for pop-up window

I created a link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

Hi Todd,
i got the same problem.(cursor not change for pop-up windows) and because i m not an expert in internal html code i did try several solutions to fix it.
The easiest (but also even longer if u need to do severals) is to create a button (withs 2 overflight changing pics) with "inserer", "image survolée"
the "image survolée" can be linked to a pop-up window with the correct effect. To do so highlight the "expected new link to" and on right side task bar ad a "comportement" named "ouvrir la fenetre du navigateur" and optionally choose the size and windows available function of the pop-up. It works even if u need to proceed first with an overflight changing button.
The result is longer to obtain and not absolutely perfect. So I guess it s only an help solution for a single mateer. i would be glad to get another solution with a text link rather than using the overflight button system. Technically it should be better, more efficient and faster to proceed with applying an html code that really makes the text appearing as a classic link to a new windows whatever pop up or full size window. Please let me know if u get further answer to fix this problem.
Many thx and excuse my technical english translation about DreamCs4

I have changed my e-mail address on the apple ID website and have been able to change it for ICloud. My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

I have changed my e-mail address on the apple ID website and have been able to change it for ICloud. My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

If this is on your computer's iTunes then log out via the Store > Sign Out menu option and then log back in with the updated version of your account. If on an iOS device then tap on your id in Settings > iTunes & App Store and log out and then log back in.

New motherboard (FM2-A75MA-E35) deliverd with Bios of other Mobo (FM-2A75IA-E53)

I bought the FM2-A75MA-E35, i got a box with this model on and it's indeed a micro atx Mobo
Well, i builded my New HTPC but got since i started building it i got multiple resets of the pc (just power off-on, in windows kernel power 41 error).
After 2 days of troubleshooting, changing PSU, memory, SSD, ... I wanted to update the Bios from v2.0 to v2.1, I however got the error that my board was not supported, after looking in tools like CPU-Z i found out that my Mobo reported itself as FM-2A75IA-E53, an ITX Mobo, this also explains why I've an option in the bios for wireless and Bluetooth, which the FM-2A75IA-E53 has, but the FM2-A75MA-E35 hasn't.
So it seems like MSI flashed the bios of another Mobo on mine in the factory? And could this explain my random reboots?
Any suggestion other then getting it back to the shop?

This thread can be closed. MSI USA send me a special BIOS to force flash.

AMD 760K doesn't work in - FM2-A75MA-E35

Hey guys, I just got this motherboard and found out that the CPU isn't compatible with the board. I've flashed it with the latest Bios (I happened to have a Trinity CPU spare) so it's now on 2.1 and still nothing. I've tried to go to the MSI support site but when I log in and try and do anything I get prompted to update my profile and then when I do that I get some weird error page (and the same thing happens when I try to create a new account).
I was just wondering if anyone has had similar issues with the CPU and if they have a work around or if there are any beta Bios updates etc.
Many thanks!

Quote from: Svet on 31-July-13, 17:31:54
its not in the QVL list: http://www.msi.com/product/mb/FM2-A75MA-E35.html#/?div=CPUSupport
That CPU support list only goes up to BIOS 1.5 so it's out of date as of Dec. 2012 and doesn't show any Richland being supported even though 2.0-2.1 BIOS supports Richland CPU's.
It could be that since that CPU was only released last month that it will need a more recent BIOS update for support. You would need to contact MSI regarding that though as us folks here in the forum really wouldn't know for sure at this time.

FM2-A75MA-E35 & RAM Clocking issue

Heres my system specs
Mobo: FM2-A75MA-E35
CPU: A8 5600k (Max RAM support 1866Mhz)
Ram: GSkill RipJaws DDR3-1600 PC3-12800 & Corsair XMS3 PC3-12800
I notice in the Bios that the ram is only being detected @ DDR3-1333, I enabled overclocking to DDR3-1600 but even then the ram is still only clocked @1333 both in Bios and in windows. Is this a known issue with this board?

Quote from: flobelix on 23-December-12, 05:46:20
Nice discussion about this vga but what has this to do with the ram. This is a MSI forum and not meant for discussing Sapphire vgas.
That it is!
Quote
The person I am building the system for isnt really using teh system for gaming, more video editing.
Install a larger GB factory matched and tested RAM kit if that is the intended use of the pc, RAM performance difference between 1333 and 1600 is rather low anyway.
Quote
The new FM2 APu setups do support XMP.
I wonder what Intel will have to say about that?

FM2-A75MA-E35 with Samsung 43" Plasma TV

Good day
Can some please assist me, when I connect my PC to my Samsung 43" HD ready plasma via HDMI, when the PC starts up the start up screen is half cut off and the TV resolution drops to 1280*760 if I try to boot in to bios is does not show completely on the screen and if I click on anything I get a crash screen and the PC freezes.
In windows 7 Ultimate 64 bit if i set resolution higher than 1280*760 everything becomes very blurry but the TV resolution changes back to 1920*1080*60
PC Setup
550 Watt ARMAGEDDON PSU
MSI FM2-A75MA-E35 MOTHERBOARD
A10 6800K CPU
2 X 4GB DDR3 1333MHZ RAM
WD 1TB SATA3 HDD
SEAGATE 2TB SATA2 HDD
SAMSUNG PS43F4000 43" HD READY PLASMA TV
Also with CPU-Z the highest clock speed i have reached is 2175MHz with OC genie enabled, can overclock trough boot up bios because of above problem dont like over clocking through windows CLick Bios II
BIOS VER 2.2
Any ideas ??? please anybody
Thanks IA

Something seems to be really wrong with your setup. The standard frequency of a 6800K is already 4100Mhz and you say max would be 2175Mhz (assuming you mean under load). Try clearing cmos and retry: >>Clear CMOS Guide<<

FM2-A75MA-E35 & 2133Mhz RAM

Hi guys, reading the spec data of the FM2-A75MA-E35 mainboard, i can see:
Supports two unbuffered DIMM of 1.5 Volt DDR3 1066/1333/1600/1866/2133*(OC) DRAM, 32GB Max
If i buy a kit of 2133Mhz RAM, can i set this frequency in the BIOS? Or better, does exists in the BIOS the "2133Mhz" setting field?
Thank you

Quote from: caml light on 03-November-12, 08:50:56
Not correct! The graphic section of AMD APU's take a nice performance boost with 1600+Mhz RAM, as you can see here:
http://hexus.net/tech/reviews/cpu/46073-amd-a10-5800k-trinity-needs-faster-ram/
So, do you confirm that this mainboard has a FSB/DRAM ratio to set RAM at 2133Mhz keeping the CPU at stock speed?
Thank you!
The mainboard pdf manual 7721v1.0 shows that a 'DRAM Frequency' setting is in the BIOS. The specs say it supports up to 2133 OC'd RAM speed, so presume the 2133 setting is available. Also, 2133 is not guaranteed as the CPU's IMC may not be able to handle or support it. In that review, if I read it right, they OC'd the GPU as well as the RAM in those tests. Do some tests for yourself at 1866, and at 2133 if they will run at that. In a real world application, I doubt seriously any actual visual difference will be noticeable.
Unless someone chimes in that has this mainboard to confirm the 2133 setting or not, recommend to contact MSI Technical and ask them.
>> How To Contact MSI <<

I have fm2 a75ma e35 i want manual overclock

motherboard/MSI FM2-A75MA-E35
cpu/amd athlon x4 750k
vga/msi radeon r9 270x
ram/Corsair Vengeance Blue 8 GB (2X4 GB)
seidon 120xl cpu cooler
waiting for reply

Quote from: Sea Dog on 01-February-14, 05:32:19
https://forum-en.msi.com/index.php?topic=40413.0
https://forum-en.msi.com/index.php?topic=157376.0
well i have already went these pages before i post my topic
i listed my parts above ,i want overclock my cpu by bios mode manual i don't want oc genie mode , i want to make it 4.3 ghz

Cpu-nb voltage not changing for FM2-A75MA-E35

Similar Messages

Maybe you are looking for