CPU only applied on the Binary - Catbundle not executed

Hi,
I am facing a situation here in on of the clients and I would like to share this situation about the CPU (Critical Patch Update). Here is the scenario:
1. The database is under 10.2.0.4
2. The CPU applied were the CPUJan2011.
In a brief: The DBA seems to forgot applying the step in the dictionary. So, if you check the Oracle binary by the opatch lsinventory command, you could see that the patch CPU were applied. Now, in the database, you cannot identify the entries in the views. ex: select * from registry$history.
Here is my question: It's now time to apply the CPUJuly2011 and my only doubt is: Is there a problem in applying the CPUJul2011 in the binary and also in the database in this situation? Or would be recomended any other steps? For example:
1. Execute the CPUJan2011 on the dictionary first
2. Then, follow the normal execution of the CPUJuly2011 (Binary + Dictionary)?
Technnically, I don't see any further problems but I would like another opinions.
Thanks in advance,
Pablo

Hi,
Personally, I would apply January 2011 to the dictionary first and then go on to apply July 2011, just to be perfectly safe. The patches are supposed to be cumulative, but this is assuming they are applied correctly and not half way through. Alternatively, you could rollback the January 2011 from binaries and then apply July 2011 in full, but I prefer the first option.
Milina

Similar Messages

Please help suggestions for solving built-only compiler error: 'The VI is not executable. The full development version of LabView is required tofix this error.'

We have develoepd a software tool and build it on regular basis. It currently runs error free when compiled in the editor, but when we built it and run the executable stand alone we get the error.
'The VI is not executable. The full development version of LabView is required tofix this error.' plus a broeken error.
This menas an compiler error that is not present in the editor but in the stand alone version. We tried to identify errors as suggested in several posts in this forum, but so far unsuccesfull.
As the editor and its compiler do not see the error and are running fine and the stand alone version just syas 'find the error in the editor' in this case LabView is of no help.
Can anyone suggest a sensible or 'good practice ' way of searching for the source of this error?
Our project comprises hundreds of Vis over several libraries.
Thanks,
Chris

Thanks Craig for all your suggestions.
We seem to have located the problem in a new vi just added to the package causing conflicts by using the same vi names as other vis already present in the package. Excluding this vi removed the error.
It seems related to a conflict by having two vis with the same name, which was mentioned by LabView and interactively resolved when running the main vi from the editor. When successfully building the main vi the builder did not mention this conflict and reported a successful build, but when trying to run the executable it gave the cryptic error. The error caused us problems because there was no hint for the cause, just the suggestion to solve this in the editor, while at the same time in the editor the VI was running fine.
We will post about this in detail after we have positively proven that this actually was the case.
The .net version issue was already checked.
Performance was the same on all machines we tested on including the dev machine.
Debugging was tried nut did not help as the vi could not run (broken arrow). We assumed that debugging only helps in running faulty functioning vi''s. We did not check for broken arrows in sub-vis (after connecting), that could have helped, although our application has hundreds of our own vis.
In relation to your remark:
'Are you using many classes? Have you verified that the proper access scopes are set for functions calling those vis?'
Could you elaborate on setting access scopes. We were not aware of this option in LabView, although we realize this is a basic element of the underlying c code.
Ragrds,
Chris

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

This indicates that you only have handles available on one side of the edit point. If the transition ends on the edit, that means that the next shop begins on the first frame of the media file and there is no room for it to extend and create the necessary overlap.
Click <a class="jive-link-external" href="http://www.fcpbook.com/Effects1.html">here</a> to find out how transitions work.

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

I do not know the security questions and when do I apply for the questions do not come to on Emile rescue!! What is the solution..?

I do not know the security questions and when do I apply for the questions do not come to on Emile rescue!! What is the solution..?

If the email hasn't arrived after a few hours and isn't in a spam filter, click here, phone Apple, and ask for the Account Security team.
(87129)

The VI is not executable. The full development version...

"The VI is not executable. The full development version of LabVIEW is required to fix the errors." That is the error I've been dealing with all day. Actually it is repeated 3 to 4 times in the error message, seen when first launching the EXE. Also of note is that the run-arrow is broken. This is in an EXE that was developed well before version 2013, but I recently upgraded it to 2013 to hopefully fix some random LVRT crashes. There is obviously no issue running the code on my development machine, only once it's deployed.
The good news is I've been able to solve the problem (mostly). My EXE now runs without the errors. I found that the problem wasn't actually in the EXE.
We have a separate project with no files, but in the build specification we have the LabVIEW 2013 Run-Time Engine, as well as NI-VISA for serial support. We then bundle the deployment in a self-extracting RAR and it does its business. In the past this has worked just fine, but with LV2013, it seems that there is a component missing from the deployment.
I found that if I download the Run-Time Engine directly from NI.com and run it, the only things I need to install are the Run-Time Engine, and the DEPLOYABLE LICENSE. If I do this, my EXE runs great, but with the custom installer, it is not included for some reason!
Putting aside the fact that I don't know why the Deployable License package is needed (we aren't connecting to remote panels), I can't seem to modify my custom installer to install the Deployable License. There are versions for LabVIEW 2009 and 2011 SP1 in the Additional Installers list, but I don't see 2013.
Can anyone explain why this is??? For now I will just distribute the 257MB Run-Time Engine and the NI-VISA installers separately I guess. But I'd really like to get back to a single, simple package to install all the prerequisites we need. HELP!

iannicholson wrote:
Yes, but then every installer I build will contain the runtime engine. That gets very large very quick. So I have an installer for JUST the runtime engine and VISA runtime.
Just remove them from the "Additional Installers" tab of the Installer dialog.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Open the VI in LabVIEW using File Open and verify that it is runnable.

When trying to run a sequence on a deployment machine I get this error. When I switch the Adaptor back to the Development System the problem goes away however I do not have the luxury of keeping the full Labview development on the test machine. Is there a know fix for this problem and what is the cause of this error. Here is the software and versions I am using. It seems that the vi's that are broken are using Invoke and Property Nodes within them, I am not sure if this is just a coincidence. It appears it is more related to the invoke node than the property node. Any help is greatly appreciated. Why does it seem everything works great until you try and deploy it on a test machine. This is not the first time I have had these kinds of problems using Nation Instruments software.
Labview 8.2.1
TestStand 4.0
Solved!
Go to Solution.

I have a similar problem.
A bit of background - I had developed a test suite with a Labview front panel for manual operations, and a Teststand project which used some of the same lower level vi's, and specific test step vi's. It was developed on LV 2010 32-bit and Teststand 2010. All was fine.
Recently i had to rebuild my development machine and installed only LV 64-bit 2011 and the latest (2010) Teststand from the 2012 Dev Suite.
I knew that i wanted to run some new hardware drivers in 64-bit versions due to another problem, so i replaced the .dll in the very lowest level VI with the 64 bit version. And ran the manual interface. All ok.
But when i try the Teststand execution, i get one of two errors:
- If i set Teststand to use the LV runtime engine 11.0.1 (2011 SP1), the i get a "Unable to load VI xxxxx with the runtime engine version '11.0'" Despite the fact that each VI does run correctly in LV dev when loaded individually, and i've saved them as version 11.
- If i set it to use the development system (which shows in the config menu 'active version:32-bit' even though 32-bit LV is not installed), then i get the "The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located." error, even though i when i open each VI in the LV 2011 it runs ok.
Any ideas?
How can i set TS dev system to use the 64-bit version? Or is there a separate 64-bit deployemrnt of TS?
Labview 2010, TestStand 2010

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Error 1003 - The vi is not executable. Simulated DAQ-cards.

Hi all,
I am updating an application written in LabVIEW 7.1 for a customer. The code is not made by my company and is pretty horrendous but it works. I can not develop the code on the machine that it is supposed to run on so I have to do it on my own computer which means that I have to simulate two DAQ-cards that the program needs. I have pretty much finished the program and I want to test if I can build an exe-file. This is where I run in to trouble an get the error message:
Error 1003 occurred at \\Server1\Users\martinh\LabVIEW Data\app\internal.llb\_Main.vi
Possible reason(s):
LabVIEW: The VI is not executable.
I know that this has been discussed at length here and that one has to look out for global variables, dynamically loaded VI:s etc. My question is, does anyone think that the simulated DAQ-cards give me trouble? Do they use some VI:s placed somewhere odd which I need to include when I build the application?
Sincerely
Martin

Hi Martin,
I suggest you try what is suggested in this link, some of the information is already covered in the posts above but some might be new.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
If you are using the office toolkit, it might be an idea to masscompile the _office folder and you might also need to uncheck the "Disconnect type definitions and remove unused polymorphic VI instances".
Good Luck
Andreas E
Applications Engineer
National Instruments

When I touch my iPad screen to execute an app, the screen goes dark then the app icon reappears. The app does not execute.

When I touch my iPad screen to execute an app, then the screen goes dark then the app icon reappears. The app does not execute. Any thoughts?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Basic troubleshooting
From Here
http://www.apple.com/support/ipad/basics/

Error "The application could not execute the required function"

Hi All,
When I try to activate the DTP the following error occurs."the application could not execute the required function".
I was able to activate the DTP for the same DataSource 2 days back but now I am unable to activate .
Kindly suggest what could be the possible reason for the same.
Regards,
Santosh Mani

If you have transformation, check it is active. Is the object 0plant is acitve or not?
Ravi Thotahdri

How can I purchase an album that is only available in the US and not Australia? HELP!

I wish to purchase an artist album that is only available in the US iTunes store. Is it possible to get my hands on?

Not from itunes.
You can buy it from Amazon or some other music retailer.

Outlook 2010, Advanced Find, 'Where I am the only person on the TO line' not working

Outlook 2010 running in online mode with Exchange 2010 SP3.
When performing an Advanced Find, clicking the check box 'Where I am:' and selecting 'the only person on the To line', the search results return email messages where there are multiple people in the To
line.
Does anyone have any insight on this, and is there a custom search I can perform for similar results in the Advanced tab?
Thank you

Unable to repro it here. What if we enable cached Exchange mode, will this issue continue?
In addition, meeting items will ignore the 'Where I am: the only person on the To line' criteria when searching. Make sure these search results are not meeting items.
Flynn

'when I try to use any of the tools on a photo, such as cut out a section, the tools will not execute.

What has changed my P'E? I have used it for many years and now, all of a sudden, it will not respond and the tools while they show on the photo will to execute.

I think you want the forum for Photoshop Elements?
If so, it's at Photoshop Elements

CPU only applied on the Binary - Catbundle not executed

Similar Messages

Maybe you are looking for