Cpu overload gone after logic relaunch

hi,
i dont have time to search this forums if this has been debated already, but currently i work with logic 7.2.3 on a macbook coreduo 2ghz 2gb and after a while one processor seems overloaded (sometimes left side, soemtimes right side) and then logic cant play without overload anymore. closing logic and restarting solves the problem for a while, then it comes back

This is no bug, your system is telling you that it cannot handle the full load of this song. Try Freezing tracks with heavy CPU-using plugins on them.
Also, check (and bookmark!) these docs:
http://support.apple.com/kb/TA24535?viewlocale=en_US
http://support.apple.com/kb/HT3161
http://support.apple.com/kb/HT2375
and especially:
http://discussions.apple.com/thread.jspa?threadID=2175192&tstart=0

Similar Messages

CPU Overload (-10010) with Logic 9.0.2 and SL 10.6.2 after clean install

Whether using the demo song (Numbers Game), or a new song even with just a couple of instruments (EXS) and a single audio track I get a CPU overload -10010 or -1009 message sometimes every few seconds, sometimes every 30 minutes.
I thought perhaps a conflict with drivers or other software, so I have tried a clean install of SL10.6, updated to 10.6.2, loaded Logic Pro, updated to 9.0.2, and added NO OTHER SOFTWARE AT ALL, and used internal audio, still same problem.
This seems to be a bug in Logic or SL. What can I do?
Message was edited by: ebjornard

This is no bug, your system is telling you that it cannot handle the full load of this song. Try Freezing tracks with heavy CPU-using plugins on them.
Also, check (and bookmark!) these docs:
http://support.apple.com/kb/TA24535?viewlocale=en_US
http://support.apple.com/kb/HT3161
http://support.apple.com/kb/HT2375
and especially:
http://discussions.apple.com/thread.jspa?threadID=2175192&tstart=0

Logic 8 CPU overload for absolutely no reason

I'm too familiar with this, which is what I'm getting for just one project that I recently started:
"Logic Pro: Disk is too slow or System Overload."
There's nothing wrong with my computer. It's a 2 x 2.8 Quad-Core Intel Xeon with 8 GB of memory. And here's a picture of what's on this project. Essentially NOTHING.
I'm panning back and forth between audio regions (consisting of clips from different songs) on two different tracks fading in and out. Nothing fancy. Yet the first time (only the first time) the playhead encounters the next region, the CPU overload window pops up. I mean....really? Why? I have no idea why this is. I am running on Logic 8.0.2 but I see no reason to "upgrade" as this version is not CPU overloading on any other project.

There are a few threads on this topic already, including one a couple of days ago. They should get you started with some ideas about how to approach the problem.
Marcus

CPU Overloads: What to try?

I know this is a tired subject but considering that it doesn't seem the CPU overload and application instability can be solved in the current version of Logic, just wondering if anyone has a good work around.
Basically, I find that while using 3rd party plugins (i.e. Kontakt 2, Omnisphere), I can get about 8 or 9 tracks before I begin to have routine application crashes, overload message, etc. Freezing does not change this (and the activity monitor shows a massive jump in real memory from 2.0 gigs to 16TB with the addition of a 9th track depending on the size of the instruments i'm using). This also has nothing to do with buffer size.
I realize that Logic has limitations in the collective size of the plugins that can be loaded (up to 2.7 gigs of 3rd party plugins) so I'm wondering if I wanted to at least double the number of soft synth instruments I can load up what could I do? I've heard some people add more hardware like another Mac or something like Muse receptor which can load your plugins through logic but doesn't tap into Logic resources. Not sure how this works though, or if there's a better idea out there.
Any heavy soft synth users out there?

and the activity monitor shows a massive jump in real memory from 2.0 gigs to 16TB
It's a known issue with Kontakt that it can only handle 2 Gigs, adjust the DFD settings and reduce the number of voices to 128 (12MB) that will free up quite a lot of RAM. Also you can open a standalone version of Kontakt and wire it via the IAC Bus giving you another 2 Gigs if you have enough RAM installed. With Kontakt update 3.5 the 2 Giga limit will be gone but that doesn't help so much as Logic will still be a 32 Bit application in which the limit still is about 2,7 Gigs of physical and 3,5 Gigs of virtual RAM.
Besides that enter the word "overload" in the search field of this Forum and you will get thousands of posts about that tiring topic...

What setting should I use for Abbey Road drums? Getting a cpu overload issue

What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)? Getting a cpu overload issue. I have a macbook pro, 4 gb ram, running Logic Pro 9. Just 3 tracks of drums and a few real instrument tracks. Can't find a guide in the manual for either Kontakt or Logic. Thanks in advance!

Hi
AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
CCT

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Different CPU Overload

I read the earlier post about CPU overload. I am not getting the overload error message, Logic just stops when the CPU bar is slammed into the red. I am not using any plug-ins or effects, I do have 48 channels of audio I am trying to mix. I have been using Logic for over a year and a half now and this is a new problem. Is there something else I can check to discover why suddenly I have this overload problem?

Different CPU Overload
this is OP question...
I try to answer directly to you:
Yes!!!
*There are different Logic overloads on different CPUs + audio device*
the overlaods message are strictly related with your CPU + Audio interface + RAM ammout and speed + Front Buss speed + Firewire, USB, PCI cards...
*also external drives spinndown can cause overloads message*
in a Pro Studio... I use workstation without external device...
all Firewire and USB device must be disconnected.. also bluetooth must be off...
(don't use bluetooth Mouse in Professional recording studio)
*Also File sharing and Wirless Airport must be turned to OFF!!!*
(OS X is a multitasking system... this is a great advantage for everyone... except for Professional Live processing power request... reduce to minimum the background running process is a must to avoid overloads and CPU spikes)
The audio cards that require CPU cycles are...
1) PCI or PCIe cards... Near to 0.1% CPU demand
2) Firewire... a little bit more (about from 3% to 8%.. depend about firewire Chip set and drivers) of CPU demand
3) USB = maximum CPU load power request... (more than 10% to 25% and more.. and this percentage rise up related with number of tracks)
(approximately percentage are stryctly related with CPU.. if G4 or G5 or Intels)
*So CPU overload are different and strictly related with your hardware!!!*
G

My Disk Utility Is Gone After a Restore On My Mac.

My Disk Utility Is Gone After a Restore On My Mac.
How can i get it back?

First make sure it's really gone by looking in the Utilities folder. That folder opens when you press the key combination shift-command-U in the Finder. If it is gone, reinstall the OS.

All bought titles and albums gone after upgrading I Tunes

Hi Guys,
unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
Can somebody please help me?
Thanks you very much...
Best regards - Greg

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

How can I add the audio content cd after logic finished installing ?

There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
If you can help me please be very specific as to how to do it so that I can follow the directions properly.
Please help me.
Thanks

Hi
You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
CCT

"sign" function gone after updating to 10.1.10 -Adobe Reader

"sign" function gone after updating to 10.1.10 -Adobe Reader
Button no longer exists for signing....

Hi,
I am not able to reproduce your problem. Which OS are you using ?
Regards,
Hitender.

Facetime button is gone after install safari download manager???

The facetime works fine after restore my 3gs settings, but this button is gone after i installed safari download manager.. even uninstall doesn't work..
The facetime button was placed by HOLD.. even in my contract info I cannot see the facetime as well. but in the settings->phone->facetime I already enabled it..
Can anyone help??

You won't get help for software installed on a jailbroken phone here in this forum.
Try google to find a solution for your problem

SAPMMC All Settings Gone after running CCCleaner , How to get all settings

Hello All
SAPMMC All Settings Gone after running CCCleaner , How to get all settings back .
I donot know what is SID ( System ID ), Instance etc.
If this is not relevant to this forum plz let me know which forum ....
Regards
Rohit

Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

Deleted messages are gone after 2 weeks!

After I delete my message, it goes to the trash. I have changed the preference to go to the new folder and not automatically delete the messages after 30 days, but they are not working. My messages are gone after 2 weeks and not in any folder. Please help!

Welcome to the Apple community.
Have you checked the settings and preferences on all your devices that sync your mail, if your mail is set to be removed after two weeks on any device, then that action will be synced across all of them.

Jserv.properties custom changes are gone after running autoconfig in 11i

Hi,
jserv.properties custom changes are gone after running autoconfigh in 11.5.10.
Please let me know do we have any way to keep the changers after running autoconfigh also.
Thanks,
Venkat.

Please see (Customizing an AutoConfig Environment [ID 270519.1]).
Thanks,
Hussein

Cpu overload gone after logic relaunch

Similar Messages

Maybe you are looking for