CPU PLL overvoltage causes sleep problems
Dear members of the MSI HQ forum,
My computer doesn't wake up from sleep.
It does go well into sleep mode, but it will never get out. If I tell it to come out of sleep, the power LED stops flashing and is constantly illuminated (like it should), but the computer never gets out of the sleep. I just see a black screen in front of me and nothing works. The only way of getting out is to press the reset button.
The way to recreated this problem is by enabling CPU PLL overvoltage and select a CPU multiplier of 45x or higher.
I need to enable CPU PLL Overvoltage in order to boot into windows at 4.5GHZ (100MHz*45x)
I am using the latest 1.H bios.
Seems ASUS has already fixed this problem: http://www.xtremesystems.org/forums/showthread.php?276146-CPU-PLL-S3-Issue-FINALLY-FIXED...Standby-now-works-with-CPU-PLL-ON&s=91d5f46a11f7b7b4f521c7e5801c56f5
This issue has been addressed to MSI support. Does anybody else have this problem? Can it be fixed?
My system:
OS: Windows 7 64 bit
CPU: i7 2600K
Motherboard: MSI P67A-GD65 (B3) Bios 1.H
Memory: Corsair XMS3 8GB dual channel 1600MHz
A few weeks ago MSI replied that they got their sleep working with PLL overvoltage enabled, MSI's Reply:
"Below is my test configuration:
MB: P67A-GD65 (B3)
BIOS: V1.H
CPU: 2600K
Memory: 2pcs of G.Skill DDR3-1600 4GB (F3-12800CL9D-8gbxl)
VGA: MSI R4870
OS: Windows 7 64bit
BIOS settings:
press F6 to load optimized defaults, set CPU ratio at 45 and enable Internal PLL Overvoltage, enable XMP function to make memory work at 1600MHz, enable the option of Resume from S3 by usb device, save&exit setup.
I can wake up PC from S3 by my usb mouse. Thanks! "
I did just that, only difference I had to manually set my vcore to 1.32V to ensure a stable overclock.
However the problem still persist :( This concludes my motherboard is defective? Since they got it working...
Also I haven't had any reply on this board from users who also had this problem so it seems I am the only one.
MSI has not responded until since. I'm going to try and RMA it.
I've really had it with this board
Similar Messages
-
Flip4mac/quicktime causes sleep problems
I installed Flip4mac and when i try to watch YouTube the computer spontaneously goes to sleep. I uninstalled and it stopped, but it's caused me so much grief in the past that it started happening when i used quicktime among other things and i had to reinstall my system software.
Does anyone know why this would happen? Is it definitely Flip4mac or is something else going on with my system?
What would cause the computer to just sleep in the middle of multimedia?
I've had hardware checked and cleared of problems twice.I don't believe there's anything in Flip4Mac code that sends commands to the system like that.
Do you have a "hot" corner set up for screen saver? Maybe there's something goin on there. Do you have a schedule set up for sleep in energy saver?
Try this simple test; create a new user account and head over to youtube. Then playback something and see what happens. If things work without sleeping, then there's something in your primary user account causing the weirdness. -
I think new mobo (MSI 770T-C45), is causing sleep problem in windows 7.
Hey all, I'm new and first time buyer of MSI mobo.... Finally got way from Biostar and Asus...lol Anyways, I upgraded to a 770T-c45 and so far so good. One problem been having is my PC wont sleep, monitor does but not pc. Before I upgraded everything was fine, so my only isolated cause is to be the motherboard, I think..
I've tried everything in power options.....geesh... I've gone into bios tried a few things there also, but still no change. I wonder if the APS thingy is causing this???
Anyone having this problem or maybe help with a solution.
Btw...i have this XCLEO WInd tunnel tower, and it has 2 huge (super bright) Blue fans on the side and it's really nice to get those to sleep along with pc..
thanks everyone.Did you set the ACPI standby state to S3? If not, go to Power Management in the bios and change ACPI Standby State to S3.
-
Help with Optiarc AD-5630A causing sleep problems
I have an original Macbook pro 17" 2.16 Ghz Intel Core Duo, 120Gb hdd, 2Gb ram.
The original superdrive fried, so I had to replace it. I picked up an Apple MacBook Air external USB superdrive and removed the drive from the enclosure to replace my fried one. I believe my old drive was a mitsumi, the new one is a Sony NEC Optiarc AD-5630A with firmware 1CHQ
Ever since I replaced it, here's what's happening, and I can duplicate the problem reliably.
If I put the computer to sleep (closing the lid or otherwise) with a disc in the drive, it becomes un-responsive after the computer wakes. Console logs show a constantly looping error:
8/24/09 5:53:23 PM kernel IOATAController device blocking bus.
This error will loop endlessly several times per second until I restart the computer. In the meantime, nothing can access the drive and the OS struggles with the sleep/wake cycle. Usually, ejecting the disc will result in the OS succesfully unmounting the volume, but the eject signal is not reaching the drive, so the disc gets physically stuck in the drive until a restart. The drive functions normally at all other times.
Thinking the new drive was faulty, and following Applecare's suggestion, I replaced it with an identical unit, (actually the manufacture dates are only a month apart, September and October of 2008) but the problem still persists. At this point, I'm thinking that it's either a hardware compatibility problem or an incompatibility with the firmware version.
This is a fresh install of OS X Leopard 10.5.8 on a repartitioned and erased drive. All software is up to date. I have reset the PRAM.
This drive is (was) used in the newish iMacs, and obviously, the MacBook Air USB drive. Some googling shows that there are different firmware versions for this drive.
Anyone have any insight? Please? Help?
Here's the log entry from sleep to wake to the error:
8/24/09 7:53:17 PM kernel sleep
8/24/09 7:53:17 PM kernel Wake reason = EC LID0
8/24/09 7:53:17 PM kernel System Wake
8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:261 powerStateWillChangeTo: flags=82 stateNumber=4
8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:262 powerStateWillChangeTo: found flag=kIOPMPowerOn (2)
8/24/09 7:53:17 PM kernel /drv/ MacModule.cpp:267 powerStateWillChangeTo: found flag=kIOPMRestartCapability (80)
8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:261 powerStateDidChangeTo: flags=82 stateNumber=4
8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:262 powerStateDidChangeTo: found flag=kIOPMPowerOn (2)
8/24/09 7:53:18 PM kernel /drv/ MacModule.cpp:267 powerStateDidChangeTo: found flag=kIOPMRestartCapability (80)
8/24/09 7:53:18 PM kernel EIR is not supported.
8/24/09 7:53:18 PM kernel IOATAController device blocking bus.
Message was edited by: kevinroAnyone have any ideas? Anyone? If there's someone out there with a macbook pro using an internal optiarc drive, open system profiler and post your macbook pro model, what model number the drive is and what firmware the drive is running. Anyone? Please? (can you tell I'm desperate?)
aaron - was applecare of any assistance? It sounds like you've got a problem compounded by a vm. I can probaly help you out - I do mac IT work for a living. Does your IOATA error loop like mine does, or is it just a couple entries in the log?
To help narrow down the problem, shut down Windows and quit Fusion. Open console so you can watch the log. (make sure you aren't currently getting the IOATA error - if you are, restart) Then put your mac to sleep and wake it back up. See if you then get the looping error in the log. Whether the error is happening or not, make this behavior repeatable so you cna predict what's going to happen ie: restart, check log, sleep, wake several times so you know what's supposed to happen.
What we want to know is, does the error occur independently of Fusion, or only when fusion is running? -
1. The procedure called by CUSTOM.pll causes the problem when we use f60gen
When CUSTOM.pll contains a call to a package that in turn calls a remote package, the CUSTOM.pll compile hangs forever.
1. The procedure called by CUSTOM.pll causes the problem when we use f60gen. Though same procedure compiles successfully using "alter procedure compile" command.
2. We have observed the problem happens due to synonym present on the remote database(db link).
It doesn’t work if you are calling SYNONYM on remote database. It works, for calls to tables or procedures or packages in remote database if that object is OWNED DIRECTLY by the account to which dblink is connecting to.
select object_name, object_type from user_objects@NH_SCM_ICE.DB.ATT.COM ;
OBJECT_NAME OBJECT_TYPE
FA_LOCATIONS SYNONYM
FND_FLEX_VALUES SYNONYMThe database link is created under the APPS user in the local database but connects to a different user (SWCS_ICE_SUPCHAIN) in the remote database.
The user in the remote database does not own any objects. It only has synonyms to objects owned by apps and others.
Incidentally, the hang also happens when trying to describe the remote package from the application tier (8.0.6.3 sqlplus) but the describe works fine from the DB tier (10gR2 sqlplus). -
My iphone 4 automatically shuts down , twice it has happened though it starts by holding the home screen and sleep button for 10 seconds but what exactly causes this problem? some defect in my set?
do you hold the home and sleep button?
-
Vista x64 Sleep Problem (no sleep, blank screen)
Just after installing the PCI-E X-Fi Fatalty card, my computer is now unable to go to sleep. It just hangs there at a blank screen with everything still working. Once I reinstalled the X-Fi driver in the device manager and that fixed it for a minute but the sleep problem still came back when I switched from Game Mode (default setting) to Audio Creation Mode. Now even if I reinstall the driver completely and not touch anything, the problem is still there. Maybe its the way Vista detects and assigns the memory space to the card I would like to get this resolved, my system specs are below.
OS Name Microsoft Windows Vista Home Premium
Version 6.0.6002 Service Pack 2 Build 6002
OS Manufacturer Microsoft Corporation
System Manufacturer Gigabyte Technology Co., Ltd.
System Model EP43-DS3L
System Type x64-based PC
Processor Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, 3000 Mhz, 4 Core(s)
BIOS Version/Date Award Software International, Inc. F8, 9/22/2008
SMBIOS Version 2.4
Locale United States
Hardware Abstraction Layer Version = "6.0.6002.8005"
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 4.00 GB
Available Physical Memory 2.7 GB
Total Virtual Memory 8.20 GB
Available Virtual Memory 6.75 GB
Page File Space 4.29 GBI have replaced the power supply now and there is no change. I see a flash of the backlight when I initially power the system on, then the post beeps and nothing displayed.
To recap, initially the system would not post. I attributed this, correctly, to a failed video card. Replaced it and I'm reasonably certain I could boot into Windows though I couldn't see anything. There was appropriate POST beeps and hard drive activity light consistent with Windows booting. When I waited for the hard drive activity light to stop, I could then press the power button and there would be hard drive activity consistent with Windows shutting down and the system would power off.
I replaced the inverter, but I lost track of which power leads were connected where on the inverter board. (IF anyone knows where the pink and blue leads connect for certain PLEASE let me know). Anyway, no change.
I replaced the LCD. No change.
I replaced the motherboard. No change.
I replaced the CMOS battery with a new one. No change.
I cleared the BIOS config, now I can't boot into Windows but otherwise, no change.
Finally, I bought a power supply, as recommended, and replaced it and you guessed it, no change.
So I guess, besides maybe getting the inverter connected incorrectly, I have tried replacing every part that I could even remotely imagine could cause my issue. I have devoted a lot of time to figuring this out and I almost always solve a system problem. Help!?! -
Possible reason for the iMac G5 with 10.4.3 Sleep Problems
Ok first off let me say that I got this new iMac G5 20" about 4 days ago. It's wonderful. If anyone out there is holding out for the intel machines, don't wait, get a G5. It's a fantastic machine. Now on to the meat of the subject. The story goes like this; I hooked up my Plextor PVR with eyeTV to my iMac to see how well it would do (been using it with a P4 Windoze XP machine and my iBook G4 14" with no problems). It worked just great. No problems with the iMac, the PVR or any of my other addons (including the boatload of software I migrated over from the iBook). So I set up EyeTV to record some stuff while I was asleep. It's supposed to wake up the Mac, record the shows then the Mac goes back to sleep. Easy huh? Well the wakeup, record part went just fine but the Mac wouldn't go back to sleep. Perplexed (actually thrilled, this is where I have my most fun with new machines, figuring out why they aren't working correctly) I did all the standard "I can't get my Mac to sleep automatically" things. You know, blow away all the plist files that have anything to do with powermanagement and autowake, reset NVRAM from OF, reset the PRAM (3 times just like the old days), reset the SMU, blow away all the Bluetooth plist files, etc, etc. Did them all, don't suggest any, I did them all I swear, really. I've been through this kind of thing before. One big difference with this iMac. Nothing and I mean nothing would work to fix the problem. The only way the bad boy would sleep is by hitting the Power button for a second or selecting "Sleep" from the Apple menu. Hmmmm. Spent the better part of a morning reading every thread here about peoples problems like mine. One post and I mean exactly one had something I hadn't tried. I rebooted the Mac in Safe Mode (hold the shift key down while it boots until you get the login screen with the red text "Safe Mode".) I forgot that OSX even did that. Logged in as myself (normal login but still in safe mode) and low and behold the thing would sleep automatically! I repeated this (boot in normal mode, boot in safe mode) many times. Every single time the Mac would sleep from safe mode but not from normal mode. Tells me it's software not hardware. In each mode I run "Activity Monitor" and save a list of the running processes to a text file. Now compare them and shutdown each process that is different one at a time. To make this story somewhat shorter (heh) I finally found that I could consistantly make the machine sleep or not sleep by killing the "mdimport" process and restarting it. This has to do with Spotlight. To be exact, it's the process that imports Metadata into Spotlights data list (I'm no expert, have a basic understanding of this). So on a hunch I ran the terminal and entered the command to delete then rebuild Spotlights databases, "mdutil -E /". Then I let Spotlight rebuild that databases and rebooted. Guess what? The iMac sleeps perfectly now, go figure. I did this once so far and the Mac has been working correctly now for about 5 hours. I've got a feeling that the problem will come back. Especially if it's an inherent problem in Spotlight and the 10.4.3 upgrade. I don't seem to have this problem with 10.4 or earlier. Long post I know but I thought it could help someone out. Please post any comments. I'd like to know if what I did is coincidence (I really don't think so since I reproduced it many times) or not.
-joe-
iBook G4 1Gig, iMac G5 2.1 Gig, iMac 266 Mac OS X (10.4.3) iMac 266 running 10.3.6, been using Macs since the '80sRight guy's i to have researched this problem
concerning my auto sleep problem.I started off by
following Joeaux's original post by safe
booting,noting what was running in the activity
monitor,booting normaly and again noting what was
running now.I eliminated the same processes that were
running from both boots, and then started quiting one
by one, the extra processes, from the normal boot, in
activity monitor.Once you quit a process, allow the
computer to try to go to sleep i.e set energy saver
to 1minute and wait to see what happens.I tried the "
mdimport"as of Joeaux but this was not my problem.In
my case the sleep problem was down to two
applications called N67U_ButtonManager and
N124U_ButtonManager.These are for use with my Canon
scanner.I also noted that if i left the scanner
connected to the computer this would also stop it
going to sleep,even after deleting the two
applications.Hope this helps!
Thank you now i know that those login items are for my scanner, and not logic audio i am a little less angry(Logic is now an apple application but the version I run was from the emagic days and i presumed that the button managers were from this app as it was the oldest bit of software running on my machine) By the way any apps that may cause a problem like this are more than likely simply residing in your user login items and can be disabled from there permanently as far as i can see. -
Dual Monitor Causing System Problems?
Hi, I'm new to this site, so I hope this is where I ask this question! My design group switched to G5/Cinema Display screen from old g4 setups mid 2005. I retained my Mitsubishi Diamond Pro 2020u monitor to use as a secondary display for pallettes, extra files, etc. It's hooked up using a dvi-vga adapter.
My new G5 had hiccups from the start, but around March 2006 I started getting Kernel Panics almost every week, serious slow-downs, Adobe app crashes, etc. It got to the point that I was troubleshooting every week, but could never put a finger on exactly what was happening. IT archive-installed 10.4.4 after we discovered the system had been updated to 10.4.6 and we thought that would solve the problem. While that solved the issues that were relevant to 10.4.6 glitches, it didn't fix everything and little, persistent problems remained, including stalls, crashes and kernel panics. After removing suspect fonts, wallpaper, icons, updating software, repairing permissions, tossing preferences, and other troubleshooting over and over, we (I.T.) finally switched my cpu to another one in the department using data migration (just my user information, not software or other files). Still the same hiccups and even new glitches appeared (InDesign crashing on spellcheck, Photoshop not granting me access to save changes to files, etc.), including two more Kernel panics (within 5 minutes of each other) in the two weeks since we switched hardware. More troubleshooting fixed the app-specific problems, but there are still the persistent annoyances occurring.
I again did all the troubleshooting mentioned above and finally someone mentioned that I'm the only designer in our group using a dual display set-up. Could there be validity to the non-cinema display monitor causing these problems and if so, what is the solution? I've disconnected the second monitor for now, but would love to have it back. Also, we work with a server (for instance, the kernel panics only happen when I try to place a file from the server into InDesign CS2 using the place command, so there's another avenue to go down if the monitor isn't the issue.)Thanks!
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applications
G5 Mac OS X (10.4.4) graphic design applicationsI only just disconnected the monitor, so it will take time to tell if that's a factor. As for the kernel panics, although it's always the same scenario (placing images from server through InDesign) they happen very randomly; it's not happening every single time I place a file. In fact, I just placed an image on the server into an ID doc I have on my desktop, no problem. So I can't say for sure that it has happened when working from my desktop or only when working on the server.
G5 Mac OS X (10.4.4) graphic design applications -
HP Officejet Pro 8600 Plus Wireless/Wired Network Sleep Problems
Okay, it's taken me a while to figure out exactly what causes this problem, but now I have, I'm no closer to resolving it.
My setup is as follows:
Printer connected wirelessly to my Internet switch with a strong wireless signal.
The PCs I print from are on a combination of wired Gigabit connected to the same switch and wirelessly.
If I turn the printer on and print straight away from either a wired or wireless PC, it works.
If the printer goes to sleep, then printing from a wired connection won't wake the printer and causes the job to fail, but printing from a wirelessly connected PC wakes the printer and job prints okay.
After the printer has been awoken by a wireless connection, the wired connected PC still cannot print and I get the message "Unable to Communicate with Printer".
I have installed HP Print and Scan Doctor and checked the printer with it, but it finds no problems, yet if I send a test page from Doctor, it still doesn't print when wired.
I can reproduce this problem on a laptop with both wired and wireless connections by letting the printer go to sleep, turning wireless off on the laptop, and with the wired connection trying to print. Then when the print has failed, turning the wireless on again and printing again, works.
The printer has a static IP address assigned on the DHCP server, but while I expect having a wired connection to the printer might resolve this problem, the printer is located away from a network port.
The firmware reports to be up to date and all along the printer responds on a browser link from either wired or wireless connections.Honestly, this is a pretty common problem with this model. I have found that setting a static IP address outside DHCP range and on the printer can help:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
For the past week, my mac mini (which runs SL) did not go to sleep mode at all and when I manually put it to sleep, it wakes up in a couple of minutes. I am running SL for many months now without any issues and have not installed any new software recently, so I can't figure out what's causing these problems. I am running a couple of programs in the background, namely Air Video server (the problems continue after I have shut it down), Chronosync Scheduler and mobileme sync services. I'm using these programs all the time, without any issues so far. Thanks for any help!
Hi,
Do any programs running possibly need to access the network? I know I had to disable "wake for network access."
It's in Preferences - Energy Saver.
Just a thought.. -
Sleep problem with ext monitor
When the ext monitor is connected closing the lid causes does not put the computer to sleep, but into some kind of an unconscious mode (no pulsing light or fan), from which it won't wake. I have to push the PB for several secs and then wait a few more to push the PB again to reboot - usually successful. Any suggestions?
If you disconnect the external monitor, does the MacBook Pro act normally when it wakes from sleep?
Hook up the external monitor and try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
Apple support article:
Video Troubleshooting Internal and External Monitors -
Leopard sleep problem which seems related to Entourage 2008...
Hi all,
I have a MBP (3,1) running 10.5.2 and I noticed about 3 months ago that if I left the lid open the energy saver triggered sleep wouldn't kick in (very hot laptop next morning syndrome).
I've read a number of other threads on Leopard auto-sleep problems (which pointed to the HP AIO frameworks) but this doesn't appear to be the same issue I have...
If I quit Entourage 2008 then the computer will sleep after the correct period of time - and that's with no other changes to my normal use. Of course I'd like to not have to worry about quitting Entourage each time I might, maybe, just possibly not be back at the computer for a while.
Now in the system log I do keep getting the following strange entries:
/Applications/Microsoft Office 2008/Microsoft Entourage.app/Contents/MacOS/Microsoft Entourage[914]: Warning: accessing obsolete X509Anchors.
I have no idea what this really does and I do appear to have such a file in the system called X509Anchors...
If I switch Entourage to Offline mode then the entries don't appear in the system log anymore but... the unit still won't sleep. It requires Entourage not to be running it seems.
Having not seen anything else on the discussions forum relating to Entourage 2008 preventing auto-sleep I'm beginning to wonder whether it's just me?!?
Anyone else seeing this effect? And most importantly, does anyone know of a fix?
I have tried the NMS sleep utility stuff and although it worked perfectly whilst I was testing it using Energy saver timings of 1 minute... as soon as I upped the time back to my usual 30 minutes for CPU sleep it failed to work again.
Any help much appreciated.Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-( -
I have installed Windows 7 Professional on my IBM Thinkpad t21. After installing, I got the latest drivers for my video card and my display. It has the latest BIOS revision (1.16). I also have the latest Power Management driver from Lenovo, which says it supports Windows 7.
My problem is with sleep. My computer seems to go to sleep perfectly. When I wake it up, however, the screen stays blank and the hard drive LED stays on, although I can hear no activity from the hard drive. The only thing I can do at this point is shut the computer down with the power button, which prompts the safe mode startup configuration screen to show up the next time I boot.
Two other things you may need to know. Very rarely when I wake out of sleep the Windows login screen comes up, but the hdd led is still on and I still need to cold boot. Second thing, when I type in "powercfg -lastwake" to the Command Prompt it says "Wake History Count - 0" This seems to indicate that my computer never actually came out of sleep at all.
I was wondering what could be causing this problem and if there was any way to fix it.
System specs:
IBM Thinkpad t21 2647-TD2
800 Mhz Intel Pentium 3 Processor
512 MB Ram
S3 Graphics Savage IX/1014
Thinkpad PM Driver 1.55
BIOS Revision 1.16Read the following documents FIRST:
Windows 7: System Requirements
http://www.microsoft.com/windows/windows-7/get/system-requirements.aspx
Lenovo Setup Guide for Windows7:
http://download.lenovo.com/lenovo/content/win7/win7_tips_notebook_guide_en.html
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks -
My MacPro is having the sleep problem again after I installed and unstilled Adobe Photoshop Elements 13. It had been working fine for the last few months until the Adobe software. I have worked with 2 Apple advisors and 1 Apple sr. advisor. But they can't seem to address my issue. The problem is that my MacPro cannot enter sleep mode after a preset time.
Can someone please look at the following output from "pmset -g assertions" and advise what I should look into? Thanks in advance.
davids-mac-pro:~ dlin$ pmset -g assertions
1/11/15, 2:31:16 PM PST
Assertion status system-wide:
BackgroundTask 1
PreventDiskIdle 0
ApplePushServiceTask 0
UserIsActive 1
PreventUserIdleDisplaySleep 0
InteractivePushServiceTask 0
PreventSystemSleep 0
ExternalMedia 1
PreventUserIdleSystemSleep 1
NetworkClientActive 0
Listed by owning process:
pid 11(UserEventAgent): [0x0000000c00000666] 16:59:39 BackgroundTask named: "com.apple.metadata.mds_stores.maintenance"
pid 4169(AddressBookSour): [0x0000000100001e0b] 00:00:26 PreventUserIdleSystemSleep named: "Address Book Source Sync"
Timeout will fire in 1774 secs Action=TimeoutActionTurnOff
pid 83(hidd): [0x0000000a00001e0f] 00:00:20 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
Timeout will fire in 699 secs Action=TimeoutActionRelease
pid 16(powerd): [0x000000090000012c] 23:35:39 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
pid 284(UserEventAgent): [0x0000000c00001e0c] 00:00:26 BackgroundTask named: "com.apple.AddressBook.ScheduledSync"
Kernel Assertions: 0x10c=USB,BT-HID,MAGICWAKE
id=500 level=255 0x4=USB mod=1/10/15, 3:01 PM description=XHC1 owner=AppleUSBXHCI
id=505 level=255 0x8=BT-HID mod=12/31/69, 4:00 PM description=com.apple.driver.IOBluetoothHIDDriver owner=BNBMouseDevice
id=506 level=255 0x8=BT-HID mod=12/31/69, 4:00 PM description=com.apple.driver.IOBluetoothHIDDriver owner=AppleBluetoothHIDKeyboard
id=507 level=255 0x100=MAGICWAKE mod=1/11/15, 12:05 AM description=en1 owner=en1Hi guys,
It maybe you'll help me also?
I started research the problem from Address Book Sync. I got this problem on 10.9.5 than I upgraded to 10.10.2 to fix it but with no result.
2015-03-11 23:42:37 +0200
Assertion status system-wide:
BackgroundTask 0
ApplePushServiceTask 0
UserIsActive 1
PreventUserIdleDisplaySleep 0
PreventSystemSleep 0
ExternalMedia 1
PreventUserIdleSystemSleep 1
NetworkClientActive 0
Listed by owning process:
pid 69(hidd): [0x000064e80009098a] 00:23:21 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
Timeout will fire in 93 secs Action=TimeoutActionRelease
pid 8108(AddressBookSour): [0x00006a5a000109c4] 00:00:07 PreventUserIdleSystemSleep named: "Address Book Source Sync"
Timeout will fire in 1792 secs Action=TimeoutActionTurnOff
pid 26(powerd): [0x000000040008012c] 08:40:50 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
Kernel Assertions: 0x4=USB
id=501 level=255 0x4=USB mod=11.03.15 15:13 description=XHC1 owner=AppleUSBXHCI
Start time: 23:32:56 03/11/15
Model Identifier: MacBookAir6,2
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 8:31
USB
Ultra Fit (SanDisk Corporation)
Log
Mar 10 18:11:33 ARPT: 3583.186744: MacAuthEvent en0 Auth result for: 4c:5e:0c:b0:50:a5 Auth timed out
Mar 10 21:43:00 vnic0: promiscuous mode enable failed
Mar 10 21:43:00 vnic1: promiscuous mode enable failed
Mar 10 21:46:06 process prl_vm_app[1627] caught causing excessive wakeups. Observed wakeups rate (per sec): 247; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45008
Mar 10 21:49:18 process prl_vm_app[1679] caught causing excessive wakeups. Observed wakeups rate (per sec): 342; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 77677
Mar 11 11:45:22 process WindowServer[121] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 13:25:14 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
Mar 11 13:25:19 ARPT: 9.008492: directed SSID scan fail
Mar 11 13:27:36 com.apple.xpc.launchd.domain.pid.BKAgentService.509: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
Mar 11 13:27:36 com.apple.xpc.launchd.domain.pid.BKAgentService.509: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
Mar 11 15:01:46 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
Mar 11 17:01:25 process TeamViewer[939] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 17:31:14 vnic0: promiscuous mode enable failed
Mar 11 17:31:14 vnic1: promiscuous mode enable failed
Mar 11 17:33:29 process prl_vm_app[1294] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 17:40:35 process prl_vm_app[1294] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 17:58:59 com.apple.xpc.launchd.domain.pid.BKAgentService.1624: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
Mar 11 17:58:59 com.apple.xpc.launchd.domain.pid.BKAgentService.1624: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
Mar 11 18:14:35 process prl_vm_app[1294] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 18:16:22 process WindowServer[141] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 18:31:54 process CleanMyMac 2[1881] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
Mar 11 18:32:16 process CleanMyMac 2[1881] caught causing excessive wakeups. Observed wakeups rate (per sec): 2516; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 247383
Mar 11 22:56:07 PM notification timeout (pid 230, Skype)
Mar 11 22:56:37 PM notification timeout (pid 230, Skype)
Mar 11 22:57:07 PM notification timeout (pid 230, Skype)
Daemons
com.apple.installer.osmessagetracing
com.cleverfiles.cfbackd
com.macpaw.CleanMyMac2.Agent
com.microsoft.office.licensing.helper
com.teamviewer.Helper
info.lokiware.attachmenttamer.securetool
Agents
2BUA8C4S2C.com.agilebits.onepassword4-helper
com.apple.AirPortBaseStationAgent
com.ggm41.HelperApp
com.google.keystone.user.agent
com.macpaw.CleanMyMac2Helper.diskSpaceWatcher
com.macpaw.CleanMyMac2Helper.scheduledScan
com.macpaw.CleanMyMac2Helper.trashWatcher
com.techsmith.snagit.SnagitLaunchAtLogin
info.lokiware.attachmenttamer.setupagent
Extensions
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
Applications
/Applications/1Password 5.app
- com.agilebits.onepassword4
/Applications/1Password 5.app/Contents/Library/LoginItems/2BUA8C4S2C.com.agilebits.onepassword4-helper. app
- null
/Applications/Axure RP Pro 7.0.app
- axure.6
/Applications/CleanMyMac 2.app
- com.macpaw.CleanMyMac2
/Applications/Dropbox.app
- com.getdropbox.dropbox
/Applications/ExpanDrive.app
- com.expandrive.ExpanDrive3
/Applications/Google Chrome.app
- com.google.Chrome
/Applications/HipChat.app
- com.hipchat.HipChat
/Applications/Keka.app
- com.aone.keka
/Applications/LibreOffice.app
- org.libreoffice.script
/Applications/MacPaw Gemini.app
- com.macpaw.site.Gemini
/Applications/Microsoft Excel.app
- com.microsoft.Excel
/Applications/Microsoft OneNote.app
- com.microsoft.onenote.mac
/Applications/Microsoft Outlook.app
- com.microsoft.Outlook
/Applications/Microsoft PowerPoint.app
- com.microsoft.Powerpoint
/Applications/Microsoft Word.app
- com.microsoft.Word
/Applications/OmniDiskSweeper.app
- com.omnigroup.OmniDiskSweeper
/Applications/Parallels Desktop.app
- com.parallels.desktop.console
/Applications/Parallels Desktop.app/Contents/Applications/Parallels Link.app
- com.parallels.SharedAppLink.Agent
/Applications/Parallels Desktop.app/Contents/Applications/Parallels Mounter.app
- com.parallels.desktop.mounter
/Applications/Progressive Downloader.app
- com.PS.PSD
/Applications/PuntoSwitcher.app
- ru.yandex.desktop.PuntoSwitcher
/Applications/Skype.app
- com.skype.skype
/Applications/Snagit.app
- com.TechSmith.Snagit
/Applications/TeamViewer.app
- com.teamviewer.TeamViewer
/Applications/Transmission.app
- org.m0k.transmission
/Applications/Viber.app
- com.viber.osx
/Applications/Viber.app/Contents/Library/LoginItems/ViberLoginHelper.app
- null
/Applications/Yoink.app
- at.EternalStorms.Yoink
/Library/Application Support/CleverFiles/BackService.app
- com.cleverfiles.cfbackd
/Library/Application Support/CleverFiles/SmartDaemon.app
- com.cleverfiles.SmartDaemon
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
- com.microsoft.autoupdate2
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
- com.microsoft.error_reporting
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
- com.microsoft.netlib.shipassertprocess
/Library/Application Support/Samsung/Scan Manager/ExitApp.app
- com.Samsung.ExitApp
/Library/Application Support/Samsung/Scan Manager/Fax Notification.app
- com.Samsung.Notification
/Library/Application Support/Samsung/Scan Manager/InstallSetUp.app
- com.ScanManager.InstallSetUp
/Library/Application Support/Samsung/Scan Manager/QuickScan.app
- com.Samsung.QuickScan
/Library/Application Support/Samsung/Scan Manager/Samsung SCX-3200 Series/Scan Setting.app
- com.Samsung.ScanSetting
/Library/Application Support/Samsung/Scan Manager/Samsung SCX-3200 Series/Scan To Mac.app
- com.Samsung.ScanToMac
/Library/Application Support/Samsung/Scan Manager/Scan Assistant.app
- com.Samsung.ScanAssistant
/Library/Application Support/Samsung/Scan Manager/Scan Manager.app
- com.Samsung.ScanManager
/Library/Application Support/Samsung/Scan Manager/ScanToPC.app
- com.Samsung.ScanToPC
/Library/Application Support/Samsung/Scan Manager/UnInstallSetUp.app
- com.ScanManager.UnInstallSetUp
/Library/Application Support/Yandex/PuntoSwitcher/PuntoStartupHelper.app
- ru.yandex.PuntoStartupHelper
/Library/Printers/Samsung/Daemon/DaemonManager/AppLoginItem.app
- com.Samsung.AppLoginItem
/Library/Printers/Samsung/Daemon/DaemonManager/AppNotification.app
- com.Samsung.AppNotification
/Library/Printers/Samsung/Daemon/DaemonManager/DaemonManager.app
- com.Samsung.DaemonManager
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/7-Zip File Manager.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Database Compare.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Google Chrome.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Internet Explorer [1].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Internet Explorer.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Windows Fax and Scan.app
- Applications.localized/Microsoft
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Excel.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Office 2013 component [1].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Office 2013 component.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft PowerPoint.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Word.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft iSCSI инициатор - средство настройки.app
- инициатор - средство настройки
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Office Telemetry Dashboard.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Office Telemetry Log.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/OneDrive.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/OneNote.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Paint.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Screen Reader.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Skype [1].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Skype.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/SkypeIcon.exe.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Speech Recognition.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Spreadsheet Compare.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Stardock ModernMix Configuration Utility.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Stardock Start8 Configuration Utility.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/TCUNINST.EXE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Total Commander 32 bit.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows Control Panel.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows Defender User Interface.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows PowerShell ISE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows PowerShell.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Хост-процесс Windows (Rundll32).app
- Хост-процесс Windows (Rundll32)
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Игры.app
- Игры
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Люди.app
- Люди
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Видео.app
- Видео
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Карты.app
- Карты
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Почта.app
- Почта
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Спорт.app
- Спорт
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Журнал Windows.app
- Журнал Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Список для чтения.app
- Список для чтения
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Студия звукозаписи.app
- Студия звукозаписи
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Камера.app
- Камера
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Музыка.app
- Музыка
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Погода.app
- Погода
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Сканер.app
- Сканер
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Справка и поддержка Microsoft.app
- Справка и поддержка Microsoft
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Монитор ресурсов и производительности.app
- Монитор ресурсов и производительности
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Таблица символов.app
- Таблица символов
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Справка+советы.app
- Справка+советы
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Блокнот.app
- Блокнот
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Записки.app
- Записки
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Магазин.app
- Магазин
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Новости.app
- Новости
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Ножницы.app
- Ножницы
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Финансы.app
- Финансы
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Здоровье и фитнес.app
- Здоровье и фитнес
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Сведения о системе.app
- Сведения о системе
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Экранная лупа Майкрософт.app
- Экранная лупа Майкрософт
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Средство записи действий.app
- Средство записи действий
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Средство просмотра XPS.app
- Средство просмотра XPS
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Средство просмотра.app
- Средство просмотра
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Просмотр фотографий Windows.app
- Просмотр фотографий Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Средство диагностики памяти Windows.app
- Средство диагностики памяти Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Компонент «Панель математического ввода».app
- Компонент «Панель математического ввода»
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Параметры ПК.app
- Параметры ПК
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Диспетчер задач.app
- Диспетчер задач
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Программа очистки дискового пространства для Windows.app
- Программа очистки дискового пространства для Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Параметры компьютера.app
- Параметры компьютера
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Программа редактирования системного реестра из командной строки.app
- Программа редактирования системного реестра из командной строки
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Календарь.app
- Календарь
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Кулинария.app
- Кулинария
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Проводник.app
- Проводник
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Обработчик команд Windows.app
- Обработчик команд Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Настройка системы.app
- Настройка системы
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Текстовый редактор Wordpad Windows.app
- Текстовый редактор Wordpad Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Приложение переноса данных Windows.app
- Приложение переноса данных Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Будильники.app
- Будильники
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Фотографии.app
- Фотографии
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Путешествия Bing.app
- Путешествия Bing
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Звукозапись Windows.app
- Звукозапись Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Калькулятор Windows.app
- Калькулятор Windows
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Подключение к удаленному рабочему столу.app
- Подключение к удаленному рабочему столу
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Оптимизация диска (Майкрософт).app
- Оптимизация диска (Майкрософт)
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Специальная экранная клавиатура.app
- Специальная экранная клавиатура
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Калькулятор.app
- Калькулятор
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Администратор ODBC.app
- Администратор ODBC
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Проигрыватель Windows Media.app
- Проигрыватель Windows Media
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/7-Zip File Manager.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Address Book.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/CCleaner.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Clip Organizer.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/ConfigWizards.exe.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/DAEMON Tools Lite.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/DSL Compiler.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Download Master.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Firefox.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Format Utility for DriveKey.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Foxit Phantom 2.2.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Google Chrome.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/HyperTerminal Applet.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/InstallShield [1].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/InstallShield [2].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/InstallShield.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Internet Explorer.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Lingvo Tutor.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Lingvo.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Data Access - "ODBC Administrator.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Office 2010 component [1].app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Office 2010 component.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Office 2010.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Project.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Store ISO Backup Tool.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft Visio.app
- Applications.localized/Microsoft®
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Microsoft® Silverlight Configuration Utility.app
- ® Silverlight Configuration Utility
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/NOTEPAD.EXE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Outlook Express.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Paint.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Remote Desktop Connection.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/SCSI Pass Through Direct setup.app
- Applications.localized/SetupUninstall
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Setup\Uninstall [1].app
- Applications.localized/SetupUninstall.app
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Setup\Uninstall.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/TCUNINST.EXE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Total Commander 32 bit.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/UtilMan EXE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows Media Player.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows Movie Maker.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows PowerShell ISE.app
- com.parallels.winapp.UUID.UUID
/Users/USER/Applications (Parallels)/{UUID} Applications.localized/Windows PowerShell.ap
Maybe you are looking for
-
Hi I downloaded Oracle JDeveloper 10g Release 2 (10.1.3) and tried to start OC4J as recommended in one of the webservices security tutorials and got this error. D:\ORACLE>cd java Invalid directory D:\ORACLE>cd j2ee D:\ORACLE\J2EE>dir Volume in drive
-
Timecode generator/overlay is not working in CS6+ Mavericks
I have the creative cloud and am editing in CS6. I go to export with timecode but it glitches. The little icon apears but nothing else.
-
Do I have to purchase another program to be able to hear sound on my movies
Hi, I just got my new video ipod yesterday and I am trying to download all my old videos onto it. I downloaded the proper iTunes and transferd all my videos into there, then I tried the right click and "convert selection to ipod" button and it took 3
-
Help with JTree's opaque methods
I have been looking through the methods provided for JTree in Netbeans GUIBuilder and I do not see accessor methods for actions like insertion, retrieval, deletion and replacement. I am looking for something like this. JTree.insert('object', JTree.ge
-
Winproducer and other intervideo software
Question for everyone. I install winproducer 2.0 with no problems. When I attempt to start the program I get the following error. failed to create empty document. To date I have. Uninstalled all video drivers and wmd drivers and reinstalled them