CPU runs at half the frequency in Satellite A

Not sure if this is a problem,but the CPU runs at half the frequency.I put the high performance plan and still the same.I think it should work at full power.
I also tried to disable CPU power option from the BIOS and did not help.
To monitor use CPU-Z and Speccy.
What you think about this?
It is normal?

Hi
The Intel CPU supports the Intel Turbo Boost Technology
This Intel Turbo Boost Technology dynamically increases the processor's frequency as needed by taking advantage of thermal and power headroom to give you a burst of speed when you need it and increased energy efficiency when you dont.
Also the CPU supports the Enhanced Intel SpeedStep Technology
The Enhanced Intel SpeedStep Technology is an advanced means of enabling high performance while meeting the power-conservation needs of mobile systems. Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. Enhanced Intel SpeedStep Technology builds upon that architecture using design strategies such as Separation between Voltage and Frequency Changes, and Clock Partitioning and Recovery.

Similar Messages

  • Imac 27 runs hot as ****, won't sleep, and cpu runs wild in w7

    I have been having audio issues with the imac 27. plugging headphones or speakers causes cpu to run crazy, the mic in the triband trrs jack does not work, and the imac runs hot, and will not go into power saver mode.
    When I came in I found my nephew who was listening to some music on the imac, and I felt the back top of the imac and it was hot as ****. I almost burned my hand. I realized then that he had plugged his headphones in.
    Unplugging the headphones or speakers can solve some of these problems.
    But, this is not an acceptable fix.
    Please contact Apple and urge them to fix these sound card issues.
    If anyone does not have these problems in w7 with the imac 27 even after the latest bootcamp and imac updates, let us know right here. I think this affects every one of the late 2009 imacs and maybe some earlier ones too running windows 7.
    Here's the post I recently ran on the headphone jack issue.
    Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
    Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
    Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
    Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
    Mac has a great reputation. I hope they remedy these problems right away.
    Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
    When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
    As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
    Thats it.
    Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
    Best to all!

    Yes, I have been dealing with this problem since early January. I just can't believe that apple would not have the necessary driver for the sound card in the Imac 27! That's like trying to run a race and not bothering to tie your shoes! How can they not have something as basic as the sound connections working???
    I was encouraged to buy a top of the line imac 27 because Apple had told us that bootcamp would enable Windows users to use the machine just as if it were a native windows machine, then they don't give us the **** drivers to use the trrs mic jack. And you can't use the external speakers without the cpu going wild and heating up like a pot bellied stove.
    This is really disheartening and now I am really thinking I made a big mistake. I wouldn't mind migrating to Mac gradually, but I have lot of scientific and other programs that require windows. At this rate there will be thousands of other mac buyers who will never make the same mistake again.
    As you can see I am quite angry about this, and getting more angry with each day Apple ignores every imac purchaser who expected to use Windows on the machine! Is the software for a sound card driver that difficult?
    Having a computer which doesn't have sound that works correctly, is like having a car without seat, you can still drive it but isn't very **** comfortable.

  • How to measure the frequency of a pulse being generated by a counter

    Hi,
    I am using labview 8.6 to generate 5 evenly spaced pulses for every 1 revolution of my shaft. However, I would also want to know the frequency of these pulses so I can determine the shaft speed. Since I am already generating the pulses using one of my counters, can I still tap into that or task another counter to measure the pulse frequency? If so, how? I have attached my code for generating the pulses and I am using an Ni 9401 module and an NI 9172 chassis. If someone can helo me modify the code to measure and tell me the pulse frequency as well, that would be really appreciated
    Attachments:
    autotrain2.vi ‏19 KB

    You'd probably get a more coherent answer if you didn't bounce around from thread to thread so much...
    How can I generate a pulse train from shaft encoder? (5/13)
    pulse train from encoder (5/15)
    how to measure rpm (5/20)
    How to measure rpm using shaft encoder and labview (5/23)
    This thread (also 5/23)
    I see you ignored my suggestion from the other thread--Kevin's solution is good too but using an encoder task offers more noise immunity (I think this is probably the cause of the problem you reported on the other thread).  You can fix it with digital filtering if you want to keep using a counter output instead of an encoder task.  Noise during transitions is pretty common for a quadrature encoder.
    A finite counter output task uses 2 counters on the 9172 (although you said 9174 earlier at one point--this wouldn't be the case on a 9174) so you wouldn't have one left to make your frequency measurement.  With the solution you have now, you can change to continuous to free up a counter if you don't care about outputing an exact number of rotation's worth of pulses (I'm not sure if you do or not--I didn't read through all of the various threads relating to this application to find out).
    For your actual question in this thread...  Have you tried running one of the frequency measurement examples?  From the code here I can't tell what you have tried (it just looks like a mangled version of the code Kevin gave to you in your other thread).
    Best Regards,
    John Passiak

  • Upgraded to 3.0.2.   After loading my concert CPU runs high, audio crashes after a few notes.

    I have a MBP 5.5, C2D 8G RAM, not a powerhouse but it has worked flawlessly with my Focusrite Scarlett audio interface. I have concert projects with 1-2 dozens of programs, using EXS24, ES2... etc.. and NI's KOMPLETE9. All legal copies.
    Before the 3.0.2 upgrade it has worked flawlessly with 128 or 256 buffer size. Now it seems very unstable. After loading my concert it stops to work correctly after even a program change. CPU runs up to the top for a few seconds then down. Then up again... latency goes very slow then after playing a few chords audio crashes, no MIDI, .... then MS3 is seems dead. What the **** is going on? I have a gig tomorrow. HEEELP!
    Is it possible to downgrade to MS 3.0.1?
    Thanks!

    I am having similar issues since updating from 3.0.1 to 3.0.2.
    I've just spent most of my weekend trying to figure out what's going on. Alas, to no avail.
    I have however made a few observations.
    Firstly, the CPU spikes occur especially when a patch is called up and played for the very first time after starting the app and loading a concert. In such a case, the CPU spikes (to some ridiculously high value like 166456%) and it takes a couple of seconds before the system returns to normal operation. During that time, there are major audible artifacts or dropouts.
    BUT – after a certain patch has been played once (and the described cpu spikes have occurred), I can then later switch to that patch again without any issues. It seems to only happen when a patch is played for the first time!
    Can anyone confirm this?
    Also, I suspect that this issue might be limited to older machines which have a Core2Duo processor. There seem to be quite a few people who report similar problems on the internet, who say that they are running a C2D.
    In my case, I have two machines (one main rig and one backup machine). The main machine is a MacBookPro8,2 which runs on a Core i7 (2.2GHz, 8GB RAM). The backup machine is a MacBookPro5,1 which runs on a Core 2 Duo (2.4GHz, 4GB RAM)
    Of these, only the backup machine (C2D) seems to be affected! This machine was running MS 3.0.1 just fine, but it obviously can't handle 3.0.2 at all.
    On the other machine (i7) however, I don't notice any changes at all. Here 3.0.2 runs just as well as 3.0.1 did.

  • IMac (late 2009) CPU runs very slow (about half speed)

    After having had troubles with performance I 've recently discovered, that Geekbench as well as Xbench return results way too low for my machine. In fact it appears results are exactly half the speed one would expect. In Xbench CPU power is about a score of 110 where I had 220 with 10.6 for example.
    Now I had done an SSD update a couple of month back and this speed gain probably masked the CPU problem. I might even have damaged the small monitor synch cable during the procedure but all hardware tests (TechTool Pro 6 for example)  show no problems. 
    I've tried resetting PRAM and SMC but to no avail. Also booting into SAVE Mode did not change the behavior. Here is my etre check profile:
    EtreCheck version: 2.1.8 (121)
    Report generated 9. April 2015 15:09:12 MESZ
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2009) (Technical Specifications)
        iMac - model: iMac10,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.3 (14D131) - Time since boot: 0:23:14
    Disk Information: ℹ️
        WDC WD1001FALS-40U9B0 disk2 : (1 TB)
            EFI (disk2s1) <not mounted> : 210 MB
            Macintosh HD (disk2s2) /Volumes/Macintosh HD : 999.35 GB (84.37 GB free)
            Recovery HD (disk2s3) <not mounted>  [Recovery]: 650 MB
        Samsung SSD 840 EVO 1TB disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh SSD (disk1s2) / : 999.35 GB (351.52 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        HP Officejet Pro 8500 A909a
        Apple Inc. Built-in iSight
        Western Digital Ext HDD 1021 1,5 TB
            EFI (disk0s1) <not mounted> : 210 MB
            Boot OS X (disk0s3) <not mounted> : 650 MB
            Medien Fotos Musik (disk4) /Volumes/Medien Fotos Musik : 1.50 TB (161.04 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 1.50 TB Online
        Apple Internal Memory Card Reader
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        WD My Book 111D 800mbit - 800mbit max
            EFI (disk3s1) <not mounted> : 210 MB
            Time Machine-Backups (disk3s2) /Volumes/Time Machine-Backups : 2.00 TB (540.10 GB free)
            Recovery HD (disk3s3) <not mounted>  [Recovery]: 784 MB
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/PMHMac.app
        [not loaded]    com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Click for support]
            /Library/Extensions
        [loaded]    com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Click for support]
        [loaded]    com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8) [Click for support]
        [not loaded]    foo.tun (1.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.squirrels.airparrot.framebuffer (3 - SDK 10.8) [Click for support]
            /Volumes/Macintosh HD/Users/[redacted]/Desktop/Aufräumordner 2014/Aufräumordner 2013/WD Software/Extras/WD +TURBO Installer 64.app
        [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
        [not loaded]    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sony.SonyAutoLauncher.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [running]    com.bombich.ccchelper.plist [Click for support]
        [running]    com.fujifilm.importer.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [failed]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [loaded]    com.koingosw.MacCleanse4Helper.Reminder.plist [Click for support]
        [loaded]    com.koingosw.MacCleanse4Helper.TrashWatcher.plist [Click for support]
        [not loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [not loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        Macs Fan Control    UNKNOWN  (missing value)
        iTunesHelper    UNKNOWN  (missing value)
        EvernoteHelper    UNKNOWN  (missing value)
        iTunesHelper    UNKNOWN Hidden (missing value)
        Dropbox    Programm  (/Applications/Dropbox.app)
        Spotify    Programm  (/Applications/Spotify.app)
        Mac Game Store Helper    Programm  (/Users/[redacted]/Library/Application Support/MacGameStore.com/Helper/Mac Game Store Helper.app)
        Printer Pro Desktop    Programm  (/Applications/Printer Pro Desktop.app)
        HPEventHandler    UNKNOWN  (missing value)
        HP Scheduler    Programm  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
        PCAutoSaveMng    Programm  (/Applications/FUJIFILM PC AutoSave/PCAutoSaveMng.app)
    Internet Plug-ins: ℹ️
        LogitechHarmony: Version: 2.0 - SDK 10.7 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.2.6 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        RayV: Version: 3.0.1.78 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.0 [Click for support]
        AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        QuickTime Plugin: Version: 7.7.3
        NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        ClickToFlash
        Zotero Connector
        GMail Counter
    3rd Party Preference Panes: ℹ️
        Backblaze Backup  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 914.97 GB
        Destinations:
            Time Machine-Backups [Local]
            Total size: 2.00 TB
            Total number of backups: 1
            Oldest backup: 2014-07-26 09:06:57 +0000
            Last backup: 2014-07-26 09:06:57 +0000
            Size of backup disk: Too small
                Backup size 2.00 TB < (Disk used 914.97 GB X 3)
    Top Processes by CPU: ℹ️
            60%    Finder
             7%    mds
             6%    mds_stores
             5%    WindowServer
             3%    Spotlight
    Top Processes by Memory: ℹ️
        1.12 GB    bztransmit
        223 MB    com.apple.WebKit.WebContent
        215 MB    Safari
        86 MB    mds_stores
        86 MB    Finder
    Virtual Memory Information: ℹ️
        357 MB    Free RAM
        3.70 GB    Active RAM
        3.58 GB    Inactive RAM
        892 MB    Wired RAM
        15.83 GB    Page-ins
        100 MB    Page-outs
    Diagnostics Information: ℹ️
        Apr 9, 2015, 02:42:46 PM    Self test - passed
        Apr 9, 2015, 10:09:38 AM    /Library/Logs/DiagnosticReports/MacsFanControl_2015-04-09-100938_[redacted].cra sh
        Apr 8, 2015, 05:13:34 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-04-08-171334_[redacted].cpu_r esource.diag [Click for details]
        Apr 7, 2015, 06:59:32 PM    /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-04-07-185932 _[redacted].cpu_resource.diag [Click for details]
        Apr 7, 2015, 08:51:12 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.SpeechRecognitionCor e.brokerd_2015-04-07-085112_[redacted].crash
        Apr 7, 2015, 08:36:35 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/DictationIM_2015-04-07-083635_ [redacted].crash
        Apr 6, 2015, 05:04:42 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-04-06-170442_[redacted].cpu_resource.diag [Click for details]
    Any suggestions?
    I appreciate any thoughts.
    Andy

    Here's the updated report (had some time waiting for the store to go up for the watch...):
    EtreCheck version: 2.1.8 (121)
    Report generated 10. April 2015 08:59:54 MESZ
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Late 2009) (Technical Specifications)
        iMac - model: iMac10,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 0/DIMM1
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.3 (14D131) - Time since boot: 1:36:34
    Disk Information: ℹ️
        WDC WD1001FALS-40U9B0 disk2 : (1 TB)
            EFI (disk2s1) <not mounted> : 210 MB
            Macintosh HD (disk2s2) <not mounted> : 999.35 GB
            Recovery HD (disk2s3) <not mounted>  [Recovery]: 650 MB
        Samsung SSD 840 EVO 1TB disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh SSD (disk1s2) / : 999.35 GB (348.84 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        HP Officejet Pro 8500 A909a
        Apple Inc. Built-in iSight
        Western Digital Ext HDD 1021 1,5 TB
            EFI (disk0s1) <not mounted> : 210 MB
            Boot OS X (disk0s3) <not mounted> : 650 MB
            Medien Fotos Musik (disk4) /Volumes/Medien Fotos Musik : 1.50 TB (155.68 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 1.50 TB Online
        Apple Internal Memory Card Reader
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        WD My Book 111D 800mbit - 800mbit max
            EFI (disk3s1) <not mounted> : 210 MB
            Time Machine-Backups (disk3s2) /Volumes/Time Machine-Backups : 2.00 TB (540.10 GB free)
            Recovery HD (disk3s3) <not mounted>  [Recovery]: 784 MB
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/PMHMac.app
        [not loaded]    com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Click for support]
            /Library/Extensions
        [loaded]    com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Click for support]
        [loaded]    com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8) [Click for support]
        [not loaded]    foo.tun (1.0) [Click for support]
            /System/Library/Extensions
        [loaded]    com.squirrels.airparrot.framebuffer (3 - SDK 10.8) [Click for support]
            /Users/[redacted]/Desktop/Aufräumordner Januar 2015/Aufräumordner 2014/Aufräumordner 2013/WD Software/Extras/WD +TURBO Installer 64.app
        [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
        [not loaded]    com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sony.SonyAutoLauncher.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.backblaze.bzserv.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [running]    com.bombich.ccchelper.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [failed]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.amazon.cloud-player.plist [Click for support]
        [running]    com.backblaze.bzbmenu.plist [Click for support]
        [loaded]    com.koingosw.MacCleanse4Helper.Reminder.plist [Click for support]
        [loaded]    com.koingosw.MacCleanse4Helper.TrashWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        Macs Fan Control-2    Programm  (/Applications/Macs Fan Control-2.app)
        Dropbox    Programm  (/Applications/Dropbox.app)
        Printer Pro Desktop    Programm  (/Applications/Printer Pro Desktop.app)
        HPEventHandler    UNKNOWN  (missing value)
        HP Scheduler    Programm  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
        LogitechHarmony: Version: 2.0 - SDK 10.7 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.2.6 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        RayV: Version: 3.0.1.78 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.0 [Click for support]
        AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        QuickTime Plugin: Version: 7.7.3
        NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        ClickToFlash
        Zotero Connector
        GMail Counter
    3rd Party Preference Panes: ℹ️
        Backblaze Backup  [Click for support]
        Flash Player  [Click for support]
        Java  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 999.35 GB
        Destinations:
            Time Machine-Backups [Local]
            Total size: 2.00 TB
            Total number of backups: 1
            Oldest backup: 2014-07-26 09:06:57 +0000
            Last backup: 2014-07-26 09:06:57 +0000
            Size of backup disk: Too small
                Backup size 2.00 TB < (Disk used 999.35 GB X 3)
    Top Processes by CPU: ℹ️
            18%    mds
            10%    Dropbox
             7%    WindowServer
             4%    mds_stores
             3%    fseventsd
    Top Processes by Memory: ℹ️
        1.12 GB    bztransmit
        223 MB    Safari
        215 MB    mds_stores
        198 MB    com.apple.WebKit.WebContent
        112 MB    Finder
    Virtual Memory Information: ℹ️
        2.70 GB    Free RAM
        4.37 GB    Active RAM
        558 MB    Inactive RAM
        956 MB    Wired RAM
        7.31 GB    Page-ins
        16 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 10, 2015, 08:09:32 AM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-10-080932_[redact ed].cpu_resource.diag [Click for details]
        Apr 10, 2015, 07:35:00 AM    /Library/Logs/DiagnosticReports/Photo Library Migration Utility_2015-04-10-073500_[redacted].cpu_resource.diag [Click for details]
        Apr 10, 2015, 07:20:59 AM    Self test - passed
        Apr 9, 2015, 10:04:41 PM    /Library/Logs/DiagnosticReports/Aperture_2015-04-09-220441_[redacted].cpu_resou rce.diag [Click for details]
        Apr 9, 2015, 09:59:22 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-09-215922_[redact ed].cpu_resource.diag [Click for details]
        Apr 9, 2015, 09:12:59 PM    /Library/Logs/DiagnosticReports/Photo Library Migration Utility_2015-04-09-211259_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 09:09:23 PM    /Library/Logs/DiagnosticReports/com.apple.library-repair.agent_2015-04-09-21092 3_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 08:48:37 PM    /Library/Logs/DiagnosticReports/System Preferences_2015-04-09-204837_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 08:30:11 PM    /Library/Logs/DiagnosticReports/CleanMyMac 2_2015-04-09-203011_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 03:43:55 PM    /Library/Logs/DiagnosticReports/Dropbox109_2015-04-09-154355_[redacted].cpu_res ource.diag [Click for details]
        Apr 9, 2015, 03:33:34 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-04-09-153334_[redact ed].cpu_resource.diag [Click for details]
        Apr 9, 2015, 03:30:52 PM    /Library/Logs/DiagnosticReports/Photo Library Migration Utility_2015-04-09-153052_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 03:20:26 PM    /Library/Logs/DiagnosticReports/Photo Library Migration Utility_2015-04-09-152026_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 03:17:10 PM    /Library/Logs/DiagnosticReports/com.apple.library-repair.agent_2015-04-09-15171 0_[redacted].cpu_resource.diag [Click for details]
        Apr 9, 2015, 10:09:38 AM    /Library/Logs/DiagnosticReports/MacsFanControl_2015-04-09-100938_[redacted].cra sh
        Apr 8, 2015, 05:13:34 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-04-08-171334_[redacted].cpu_r esource.diag [Click for details]
        Apr 7, 2015, 06:59:32 PM    /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-04-07-185932 _[redacted].cpu_resource.diag [Click for details]
    Somebody posted a very similar problem, resetting SMC helped there. Running Bench I can see normal degradation when running other tasks (i.e. from 110 CPU which is max of what I can get at the moment to 80-90 when running other apps) So it really seems to be some preset which keeps the CPU from running both cores or such.
    Andy

  • Is it normal when I run a benchmark, the temperature of cpu goes to 95 degree Celsius

    Is it normal when I run a benchmark, the temperature of cpu goes to 95 degree Celsius.
    It is a latest Mac Pro Model, and I just bought it half month ago.
    Many Thanks

    Yes, that's normal. Don't do it very often or over long periods.

  • Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configurat​ion, do any of the later versions support it?

    Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? 
    If version 6.5 does not support this configuration, do any of the later versions support it?
    I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI.  We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
    Thanks

    Hi,
    I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
    Why don't you just call your next/regional NI sales rep?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

    Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? 
    If version 6.5 does not support this configuration, do any of the later versions support it?
    I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system.  I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris.  I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

    duplicate post
    In the future, please don't try to stuff your message in the subject line. Thanks.

  • Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

    Whenever i connect the hdmi cable to the tv and the power cord simultaneously on my MacBook Pro running Mountain Lion, the laptop overheats, i noticed in the activity monitor that Loginwindow was taking up to 80% of the cpu, any solutions?

    Mac OS X: What is Safe Boot, Safe Mode?
    Mac OS X: Starting up in Safe Mode
    I have tried installing a disc to try and reinstall the operating system.
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    If you did manage to reach the desktop after doing any of the above
    my battery was dying after a few minutes so I was trying to kill the battery and recharge it to see if I couldn't get it back to a full charge.
    Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
    I noticed the computer running slow
    How large is your hard drive and how much hard drive space do you have left?
    Mac OS X (10.4.3)
    Update to 10.4.11 using the combo update or Software Update along with all the other updates that goes along with it.

  • This afternoon glass of my iphone 5c runs out .. half the time pushed back inside but I am scared .. please help me. thank you

    this afternoon glass of my iphone 5c runs out .. half the time pushed back inside but I am scared .. please help me. thank you

    Welcome to the user to User Technical Support Forum provided by Apple
    You need to take your Device to an Apple Store or AASP (Authorized Apple Service Provider).  Be sure to make an appointment first...

  • Increasing the SGA Size to Reduce CPU Run Queues?

    I got the following e-mail message from one of our UNIX admins and wanted to know if anyone can shed some light on this:
    I was just talking to [a consultant] about the problems on [the database server] and he pointed out that he has seen extremely high CPU run queues on this server, despite the fact that average CPU usage is not hitting 100%. We did some more digging and memory is being poorly utilized on this server. There is a lot of available memory that is not being used. We think that the run queues are running up because we have multiple reports coming in and sitting on the individual CPUs but they aren't able to fully utilize the available CPU. We were wondering if it would be possible to adjust the database to use more of the available memory and see if that allows the queries to use the CPU more effectively.

    jdurst wrote:
    I got the following e-mail message from one of our UNIX admins and wanted to know if anyone can shed some light on this:
    I was just talking to [a consultant] about the problems on [the database server] and he pointed out that he has seen extremely high CPU run queues on this server, despite the fact that average CPU usage is not hitting 100%. We did some more digging and memory is being poorly utilized on this server. There is a lot of available memory that is not being used. We think that the run queues are running up because we have multiple reports coming in and sitting on the individual CPUs but they aren't able to fully utilize the available CPU. We were wondering if it would be possible to adjust the database to use more of the available memory and see if that allows the queries to use the CPU more effectively.First, [read these comments.|http://prodlife.wordpress.com/2008/05/06/newsflash-100-cpu-is-worse-than-you-think/#comments]
    So, there are a lot of things that could be happening, and your post doesn't even begin to point in the right direction. Is your system heavily batched? You might speed report things up by slowing down the batch and letting other things use the cpu's. What does Oracle think it is waiting on?
    As the comments cited above suggest, Cary's book addresses how to figure these things out. Big CPU run queues are certainly an indication of tuning necessity, perhaps on both the Oracle and OS side. It could even be something silly like I/O being too slow so the CPU's are waiting on that stuff. There are enough variables involved it can very quickly become like squeezing balloon animals if you don't use a structured approach.
    So, what all hardware is involved? What are your init.ora parameters? What exact versions of everything? What do OS utilities show?

  • OATS CPU does not support the SSE2 instruction set required to run JRockit

    Hello,
    I am trying to get the OATS agents to work on some injector machines, however, when I try to start them I get the following error:
    "[ERROR] Your CPU does not support the SSE2 instruction set required to run JRockit.
    Could not create the Java Virtual Machine."
    Is there a way to configure OATs to use the Sun JDK instead? I have the Sun JDK in my path and JAVA_HOME set accordingly, however that doesn't seem to make a difference. Alternatively, is there a workaround to this problem?
    Thanks,
    Michael.

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • Check the frequency a report is run

    Hello experts,
       I  like to know if there is a way to find out how often a custom abap report is run and who the user is ?
    Is there anything in sap that i can use ?
       Any suggestions is appreciated and awarded.
    Thanks
    Joyce

    hi,
    Some more links...
    ABAP Report to find the Time for execution
    How to find how many times a report was executed?

  • Measure the Frequency Of User Report Running

    Hi Experts,
    Currently I am working on the BW3.5 version. Currently we are having 70 reports in the system. Our client requirement to list out the reports which is not executed frequently and label that obsolete.
    So I want to find out how many times a particular query has been accessed.Unfortunately, the BI statistics cube are not activated in the current server. So I cannot utilize the BI statistics cube option.
    I tried working with ST03N as well with table RSDDSTAT but didn't get a clear picture. I am still amazed how people find this mode useful to gauge the frequency of use. Probably I am not interpreting the data well. Would preferably like to know who have used a particular query on a particular day.
    Please through your thoughts on the issue. Thanks.
    Thanks,
    RR
    Edited by: Ragu R on Oct 7, 2010 1:39 PM

    Hello Nacho,
    the output terminal of the AI Start VI will never be able to give you the actual rate when you use external clocking. It's only valid whenever you use internal clock (and the board divides down the master clock to get as close as possible to the desired rate). This is what you get at the output.
    You can test this by using an example with internal clock and choose a "rare" frequency/rate such as 1621.5. The board will really sample at a similar rate, but not always at the exact speed you may choose.
    If you want to calculate the frequency, you'll have to use counters and feed the encoder signal (CH A) to the counter's source (or gate depending on which method you use to compute the frequency).
    Regards,
    Jorge M.

  • AE is not using more than half the CPU power for rendering

    hi,
    Excuse my ignorance, but I really can't understand why this is happening:
    Multiprocessing is on.
    CPU: FX 8350
    RAM: 16GB
    Any advice will be much appreciated. I'm really frustrated as I think 5 hours render time for my 10 minute footage is way too long...

    Sometimes, CPU processing is not the bottleneck.
    5 hours is not at all an unusual amount of rendering time for 10 minutes of video when using heavy effects, 3D, etc.
    See this page for resources about making Adobe Premiere Pro and After Effects work faster: http://adobe.ly/eV2zE7

Maybe you are looking for

  • Calculating GPS latitude/longitude from NMEA strings

    It has long bugged me that the cgps tool shows accurate position data (longitude and latitude) that doesn't match the NMEA strings at all. For example, suppose that the NMEA string values for a position are as follows: 3218.0489, N, 6447.5086, W In t

  • Opening Balance to be displayed along with line items

    Dear Experts, Is there any way to display Opening Balance for a particular GL along with LIne Items. FS10N only provides Period wise opening balance and line items. If I have to select the line items for a GL in the middle of the period and see the o

  • Transport request and objects

    hi experts, can anybody tellme how u transport requets and how u transport objects.

  • How to download Bridge CC after uninstalling

    As it was frequently crashing I uninstalled Bridge CC. Now I got problems with the new download. It requests to be opened with an application. Which application does it request? Can someone help me?

  • Why do i have to keep re-booting the computer to regain internet connection?

    I have recently upgraded my system to OS X Yeosomite but I have to keep re-booting the computer to re-gain a connection and this is very annoying as I never know when it is going to freeze. I also have problems connecting to any wifi networks keeps p