CPU Temp and Bios?

I have my Athlon 2100+ installed with a volcano 6 into my KT3-Ultra ARU board. Is 40-41C a good temp (from bios)? FSB is at 133, case temp was 29C and room temp was 68F.
Does MSI put the new bios on the board during production? It appears my board came with bios version 5.4 already installed and I just want to make sure it's not a glictch.
~Matt

Hi I think as MSI manufactures thier boards ,they update to the latest bios as they put out new ones,because when I bought my TURBO2, it came with the then latest bios 3.2. So if you see 5.4 ,thats what you got. Regards, BIGDADDY51 CT USA

Similar Messages

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

Weired voltage cpu temp and fan speed readings

Built this system last week when i install core center I get no 3.3 v readings. cpu temp plays between 18c to 60c and the fan speed from 800 t0 6000rpm. Check in the bios all voltage readings are fine but cpu temp and fan readins can be way off. Also installed lastest versions of mbm and get the same results. Flashed bios to latest version also. Cool and quiet is not activated. Weired thing everything runs fine. motherboard k8t neo2 cpu amd 64 3500 memory corsair 3200LL 1024 video card BFG 6800gt sound Audigy 2 hard drive WD 120 sata liteon dvd rom and cd-r power supply Antec 480watt neo power Everything is at stock speeds with all latest drivers and xp sp2. Don't know what can be the problem. Please help not the first systeme I have built but first time I encounter this problem. Tried 3 different psu for testing and get the same result.

Well sorry to say I solved the problem for good. Contacted MSI support. Only answer I got was Maybe the board was bad. Got it exchanged from the store and got an Asus av8 deluxe rev.2 instead. Everything runs fine. It was my first MSI board and sad to say it gave me a lot of headaches and configeration problems. The new setup ran great on the first try. Don't think I will buy MSI again in the near future.

CPU Temp and Fan Speed

Hi
According to SMC Fan Control and iStat my CPU is running at 74C currently and often 90C under light load with associated fan speed of 6200 rpm. I have checked activity monitor and very little load on CPU jsut safari and Activity Monitor have any significant usage ( 10% ish). Is this a 'normal' CPU temp and if not are there any ways to check cooling or in crease cooling, ultimately to keep the fan low and noise down,battery life up??
many thanks

thanks for the response.
'All processes' is selected - showing 50-70% CPU idle. MacBook has good ventilation, sitting on a hard table. I upgraded the HD a while ago, to a 7200 rpm 320GB unit, would this make a difference?

Is there a free app that allows me to show cpu temp and fan speed in menu bar?

i want a free app that monitors cpu temp and fan speed and can display them in the menu bar of my MBA

http://www.apple.com/downloads/dashboard/status/istatpro.html

Question regarding CPU temps and latest bios (1.8)

Hi, just build my first system using an MSI board. The K8N Neo2 Platinum with an A64 3500+ Venice. It came with bios version 1.5 and everything went smooth. Been running stable for a few days now. Cpu temps were anywhere from 38 (idle) to 50-54 under load. Though most of the time they were in the mid 40's. Which are acceptable temps.
Anyway, I just installed the latest bios tonight (1.8) and the reported temps have drooped significantly. Around 27c (idle), which is actually lower than the reported system temp (28c). One of the listed fixes for Bios 1.8 are cpu temps, but can these be correct? They seem very low. Which temps should I believe?
Thanks

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

K7N2GM-L 6777 BIOS doesnt correctly detect CPU temp and FAN speed

Hello,
I use a K7N2GM-L 6777 mobo with a amd 1800+ and a arctic copper silent 2tc.
the mobo isnt able to detect the right cpu temperature and cpu fan speed in bios.
did anyone experienced that problem??
i already updated to the latest bios V1.6 but no change !!
the cpu temp is shown about 6°C/42°F and the fan speed is 0 rpm !!!
but the system temp is shown correctly (21°C/69°F (when i just started the system))
any idea
greetz,
fba

Hello!
It has been heard of before, yes, but your board is rather new so I don't think it has had an issue yet.
There is normally a sensor on the processor. If it does on your processor I can't say. If there isn't a sensor on the processor, or if it is covered with thermal grease, or otherwise damaged, BIOS and all programs that read BIOS data will be wrong.
Bit off: I'm speculating in that HSF, and I wonder how good and quiet it is. Been recommended by a store nearby.

Axis 700 - CPU Temp and Sys Fan Control Problems

I have just received an Axis 700 barebones. I ordered a 700 Lite with the fanless processor but I received a system with C7-D 1.5GHz processor and a system fan !. The heatsink looks the same as the Titan 700.
The BIOS and PC Alert report a CPU temp of 64C immediately on start-up rising to 70C at idle and 100C under heavy load. System temp is steady at aound 30C. I've measured the heatsink temp with thermometer and it's about half the value reported by PC Alert.
The system fan in the heatsink is running at full speed but BIOS and PC Alert reports 0 rpm. If I slow the fan almost to a stop with a piece of paper, I do get a fan speed of 1000-2000 rpm.
It feels like a BIOS problem but the MSI website only has a single version, v1.00. My board has version v1.1B4.
Does anybody have a similar experience?

It could be something wrong with the CPU FAN, else if you think that its BIOS issue you can ask MSI here: http://ocss.msi.com.tw/

CPU Temp and CPU Fan Speed

I am having a strange problem . One time I will boot the PC and CPU temp is 43 and CPU fan speed is 1308 rpm in Core Center. I do a restart system and the CPU temp is 32 to 36 and CPU fan speed 3308. Not sure if I should trust Core Center . Bios shows CPU temp 48 and fan speed of 3328. I have been reading here that there are a bunch of threads containing some kind of problem with CPU temp or fan speed. My Bios is 1.4. If anbody can give me some ideas that would be great.

Open CoreCenter on deshtop. Click where it says CoreCenter. Click Cool&Quite button. Then Click apply. This drops the fan speed back into the 1400 range and the temp will rise back to the 40s.

T510 datasheet CPU temp and temperature in general

Hi all
I have a T510 4313CTO and I love it.
I sometimes run programs that are very CPU intensive i.e Max's the CPU and sure enough the fan kicks in to keep it cool. However I notice that the CPU Temp reached 80 degrees, when it had been running at 100% CPU for 30 mins or so.
I am looking for a datasheet or similar regarding the temperature of the CPU and other parts (if they have temperature sensors)
I don't have any problem - just looking for data
Regards
J
Solved!
Go to Solution.

given that you have the i7 dual core and the nvidia GPU then the temperature you experienced is quite normal for a cpu running 100% load for 30 minutes.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

MBP cpu temps and fanspeed help

So I have a MBP intle core i5 2.5GHz with 4 GB of ram, I thinkits either a 2008 model or 2010, I bought it new in 2010.
It has always gotten pretty hot, but thats what MBPs are supposed to do, I get it, but lately I have been testing temps and RPM with istat pro and rmcfancontrol and I think there may be a problem.
my temps all seem fine exceptmy CPU temp, which is regularly above 70 degrees. when doing semi extensive things like watching videos, streaming netflix or menial photoshop tasks, it is generally 80-85, with the fans around 3.5k RPM to 5K RPM. If I plug in my new 21 inch monitor (1920x1028 resolution) and play online poker, watch videos, or any design tasks involving adobe programs, ive seen it jump as high as 94 degrees, and im sure RPM atleast 6k, these may both go even higher as I have not tested the max yet.
this is usually when I have say an online poker lobby with tables going, a tracking software db running, skype on and firefox on. one question I have is, will tthere be less strain on the cpu if I drop the resolution of my new monitor? I dont want to drop it past 1600x1000 (not sure of the exact dimensions) because then it is defeating the purpose of why I bought a new larger screen with a high res.
second, I already run a desk sized fan on my MBP while it sits on an elevated pad (0.25 in approx) with 2 build in fans, left and right. The cpu is located just above the ESC button and that is where the heat is obviously centered so i place my cooling efforts as much as I can on that area.
my next question is, with fancontrol, how high can i force the fans to run and for how long while doing these kind of tasks on dual monitors? Can I set the left side fan to run at 5-6k as a default when playing a session of online poker (this is my part time job so its an important question) while leaving the right fan at 2k? or would it be better to keep them balanced? how long can they run at high rpm before it could cause problems? how long can my mbp run at constant temps of 80-95 degrees before it is dangerous for it? like I said it is mostly common for it to be between 75-85 at most times.
and last but not least, could this be a defect that it runs at such high temps? could it be my fans that are just plugged up and need a cleaning or replacing?
all suggestions are welcome, thank you

LampmanBrad wrote:
one question I have is, will tthere be less strain on the cpu if I drop the resolution of my new monitor? I dont want to drop it past 1600x1000 (not sure of the exact dimensions) because then it is defeating the purpose of why I bought a new larger screen with a high res.
Of course. A smaller resolution will require less performance to your dedicated graphic card. Note that your Mac has got two graphic cards (an Intel card and a NVIDIA GeForce one), and your computer switches to the dedicated graphic when it requires more graphic performance.
LampmanBrad wrote:
my next question is, with fancontrol, how high can i force the fans to run and for how long while doing these kind of tasks on dual monitors? Can I set the left side fan to run at 5-6k as a default when playing a session of online poker (this is my part time job so its an important question) while leaving the right fan at 2k? or would it be better to keep them balanced? how long can they run at high rpm before it could cause problems? how long can my mbp run at constant temps of 80-95 degrees before it is dangerous for it? like I said it is mostly common for it to be between 75-85 at most times.
We don't recommend smcFanControl because your Mac knows what's the correct fan speed and because this application modifies the SMC.
It's not good that your fans run at maximum speed for a long time (5000 rpm is too high). Now, the best you can do is to reset the SMC > http://support.apple.com/kb/HT3964 If you have problems with the fan speed, this should solve the problem.
LampmanBrad wrote:
and last but not least, could this be a defect that it runs at such high temps? could it be my fans that are just plugged up and need a cleaning or replacing?
If the SMC reset doesn't work, I suspect two things: the first, that you have a hardware problem, and the second, that there's a process eating CPU and memory when you are using the computer, because those temperatures are not normal. Also, at that fan speed, they may fail

CPU temp and paranoia.

Hi all,
During CPU intensive processes (rendering etc.) the iStat menu reports the CPU temp of up to 81C, which is quite hot, I think. At the same time the fans speed up to about 2200rpm and don't go any faster.
Now, should I assume that the system knows what it's doing and leave it as is, or be paranoid and get the fan control and speed the fans up?
I am not sure what to think / do about it.
TIA

Here's the link to Fan Control. I run it on my MBP even though it's not currently doing heavy-duty apps.
http://www.versiontracker.com/dyn/moreinfo/macosx/31029
One nice feature is a quick access setting (via a menubar icon) to a "high-performance" setting that runs the fans up to their max of 6000. Handy if you see the temp climbing unexpectedly.

USB/FireWire usage increases CPU temp and fan speed

Hi,
I'm curious, does the usage of USB and FireWire ports increase CPU temperature and fan speed...?
I have an M-Audio Fast Track USB interface plugged in and whenever I play any songs from iTunes using that interface as an output, my CPU temp increased and fan speed jumped from 2000 to 3300 rpm. And on separate occasion, an 8GB of file transfer from an external FireWire-based HDD had both fans speed up to 4,400 rpm.
Is this normal...? All these were done with an external display plugged onto the MBP with "clamshell" mode.

USB operations involves quite a bit of CPU action, Elphidieus.
Firewire places less demand on the CPU but, in a situation like the one you describe can involve both increases in power usage and in HD temperatures.
The fan speeds on Macs are not simply responsive to CPU usage. Both HD temps and power usage can also play a part in the equation that ultimately produces the fan speed. As HDs have much lower heat tolerance than CPUs you will find that it is quite common to see the fans ramp up when doing a large file transfer over FW (or USB, for that matter) , especially if the internal HD temp gets to over about 50-55º Celsius.
Cheers
Rod

Latest upgrade - have you noticed a BIG change in CPU temp and fan activity

I have just installed the latest update which included the Mac OS X Update 10.5.7.
Prior to this, the CPU temperature was averaging 100, fan speed approx 2-3k, no matter what I did. Checking the ACtivity Monitor showed no runaway programmes.
Now CPU temp is 56, fan speed 1k.
The battery pack no longer is hot enough to fry an egg.
Has anyone experienced such changes?
I wonder if this relates to the very poor battery life/usage associated with these MBP originals?
royuk

thanks for the response.
'All processes' is selected - showing 50-70% CPU idle. MacBook has good ventilation, sitting on a hard table. I upgraded the HD a while ago, to a 7200 rpm 320GB unit, would this make a difference?

Temp and bios question

Okay, new to the board and I must say I am impressed. Not a lot of hating goin on.
First the details:
MSI 875P NEO-FISR mobo bios v3.5
Intel P4 2.8 800fsb - Northwood not overclocked- stock HS/Fan
ATI Radeon X800Pro
Kingston DDR400- 2x512
Lite-on CD RW / DVD RW
Samsung 120GB SATA HDD 7200rpm
Win2K SP4
Aspire X-Alien case with 6 80mm fans - 420w PSU
Hopefully thats enough info...anyway my problem is the temp on my CPU has suddenly went up by almost 20 degrees C. Im wondering if it is the latest BIOS. I had updated every time from 3.1 up to 3.3 and I decided to not put on 3.4 just out of laziness. I did update to 3.5
Before my temps would run 28-29C idle and after serious gaming it might go up to 45C. the other day I noticed it was idle at 49C and gaming would jump to 63-64C. I have CoreCenter set to shutdown at 65C because I don't trust it. Nothing has really changed other than the BIOS and a newer version of CoreCenter. I blew off HS last night, but no change...it really was not dusty, only had system for few months now...My X800 runs in same area as always, so I dont think it is an ambient temp problem. I also uninstalled CoreCenter and installed an older version, but no change.
I was wondering if anyone else had this problem. Could it be the temps were wrong before, and they have been fixed with a subsequent BIOS?
Could be they are wrong now?
I'm thinking of buying a Zalman HS/Fan, but it doesnt make sense that what was running really cool before is now running hot with same HS/Fan...so Im not sure if I NEED to buy a new HS/Fan or wait to see if next BIOS fixes problem.
CoreCenter is only program I have used so far, so I will try SpeedFan when I get home and post the results of that tonite or tomorrow, I wanted to post this to see if there might be some other having same problem, or another possible fix. I was afraid to flash BIOS back to previous version...I was not sure what would happen. Is this possible? Should I try it and are there any "gotchas" in doing that?
thanks for any information you have.

okay, so I disabled CoreCenter and installed Speedfan using Danny's guide. SpeedFan has actually dropped the temps from idle at 49C to 41C and gaming gets up to about 62 C still...one interesting thing is CoreCenter would only allow my fan at max speed to just under 4,000 RPM (if I remember correctly) and SpeedFan on max is over 5400 RPM which I am thinking is responsible for the 8 degree drop in idle temp.
With all the info you guys have provided like the water cooled system running same temp, Im thinking it is the BIOS. Why would a water cooled system run same temp as a stock HSF setup, even if the BIOS update bumped the temps up 20 degrees, I would think the WC system would still be running cooler, like 38-39C compared to our 45-46C.
Anyway, Im thinking Im going to hold off on purchasing an aftermarket HSF and see what the next BIOS brings. I feel comfortable that the bios is throwing the temp READINGS off and the actual temp is not hotter than it has ever been.....I guess....heh. I do like how SpeedFan is controlling the temp better than CoreCenter...if you guys have not tried it, you might want to. It did lower my temp readings 8-9C. Here is the link to the thread on setting it up.
SpeedFan 4.09/4.11 Configuration for 865/875 Boards

CPU Temp and Bios?

Similar Messages

Maybe you are looking for