CPU-Upgrades: can Sonnet and PowerLogix Firmware live next to each other?

Hi,
I have previously installed a Sonnet firmware with a Dual 1,8GHz 7447. This also worked with a Single 1,2GHz 7455 Sonnet, no reflashing.
Now I got a PowerLogix/Newertech 7448 Single 2GHz and I am asking myself, if I first have to uninstall the Sonnet firmware or if both can "live" on the same ROM-Chip?
I would like to be able, to once swap the CPUs again and so prefer to not uninstall the FW. The PowerLogix Manual is very specific, but it does not say something about whether you have to first uninstall other firmware.
Thanks!

So, I guess I have to first uninstall the Sonnet FW (there is an uninstaller!). The Apple Firmware should be the normal 4.2.8 then again, right?
I remember some time ago I read on hintsforum.macworld dot com that MDDs were different. If you installed a sonnet FW, you could not use the stock CPU afterwards again, because the ROM was deleted. Explanation was, that there wasn't enough space on the chip.
I will have a look, if I can contact PowerLogix or is there site only for past reference (like archived)?
I'll find out. maybe OWC can help me out, too.
I come back and tell you all. If someone likes to add something, please feel free to do so!

Similar Messages

VGA and HDMI ports are next to each other; any VGA cable blocks HDMI port; want 3 displays.

The VGA & HDMI ports are right next to each other on the left side of the laptop. I ultimately would like to connect two monitors to it, but am unable to occupy both ports because the everyday end of a VGA cable/extender is too wide. Any solutions?

Hi, Firstly you won't get 3 displays without buying more hardware for your dv7 that why you won't be able to plug 2 ports at the same time. Regards.

SUM and count next to each other

SUM and count next to each other
I would like to have the measurements SUM and COUNT cells being next to each other.
As a default it shows up like this:
.......SUM............. COUNT
......RegionA RegionB RegionA RegionB
2000..... $..... $..... nn..... nn
2001..... $..... $..... nn..... nn
2002..... $..... $..... nn..... nn
Can I change this somehow to:
......RegionA.....RegionB
......SUM COUNT ...SUM COUNT
2000...$....nn......$... nn
2001...$....nn......$... nn
2002...$....nn......$... nn
thnx
Endre

Select your axis "Region" and move it over (i.e. on top of) your data points (SUM, COUNT, etc.).

I have a hp psc750 works great but like to upgrade can i and if so where

I have a hp psc750 works great and i have a hp photosmart 240 both works great like to upgrade can I and if so where thank you Hope

Hi,
Please check page #1 of the following book. It has a list of supported CPU's from day 1.
h10032.www1.hp.com/ctg/Manual/c01550108.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

We have 3 kids with ipods, all on one apple id and they complain that they get each others messages, apps etc. what can I do to change this?

We have 3 kids with an ipod touch each. All are on one apple id (mine, so they have to come to me to authorise purchases) and they complain that they get each others messages, apps etc. What can I do to set this up differently, so they can each manage their own content etc but not make purchases?

Go onto all iPods, and turn on "Restrictions" and disable installing apps. The apps do auto download, and the only way around the messages problem is to make 3 Apple IDs. When installing apps, it will ask for a "restrictions" password, and you can enter that.

Please move the 'SEND' and 'SPELL CHECK' options away from each other, and when sending, ask the question, 'Are you sure you want to send now?' Thanks

The send and spell check options are next to each other. I can not tell you how many times I hit the send button be accident. When sending, and question of 'Are you sure you want to send now?', should be asked.
Thanks

Actually, unless something has changed, you can set Thunderbird to run an automatic spell check when you click Send. That might be your best workaround.
Tools menu > Options > Composition panel > Spelling mini-tab
(You can display the classic menu bar by tapping the Alt key)
It might also be possible to customize the toolbar, but I think this might be safer.
Regarding a general confirmation for sending, I noticed some add-ons for that, but I don't have any personal recommendations.

HT5225 I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.

I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.
Is there a setting on the iphone that will allow ical entries on the iphone to sink to my other computers
Thank-you

Welcome to the Apple community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

HT204053 Our family uses one Apple ID for all of our iPhones. We installed the update and now we are all getting each others photos and texts. How do we stop this?

Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

I have recently changed from Windows 7 desktop to a new iMac running Mavericks. I have chosen a wired keyboard as I like the usual Delete key function.
I cannot find out how to select several items which are not next to each other (e.g. words in Pages). The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work. Would be grateful for advice

Hi JBowfin,
If I am understanding your question correctly, I believe that I have an article that will address this question for you:
Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
http://support.apple.com/kb/TA20396
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How can I have two PDFs open at the same time next to each other?

How can I have two PDFs open at the same time next to each other?

Moved to Adobe Reader for iOS.
The only way I know how to do that is with two iPads.

HT1386 I last updated my husbands iPhone 4 and since then we are getting each others text messages. Sometimes when I text a person that is on bothe our contacts it will come through as my husband and not me.

I last updated my husbands iPhone 4 and since then we are getting each others text messages. Sometimes when I text a person that is on bothe our contacts it will come through as my husband and not me.

Try this:
On all impacted devices, go to settings, messages, send & receive and place a checkmark next to only those phone numbers and email addresses listed you want that device to recognize.
Good luck!
Tony

HT4623 How can I update ios if "software update" option is not showing on the page "General"? On my Iphone, it only show "About" and "Usage" next to each other.

How can I update iOS 4.2.1 to the latest iOS if "software update" option is not showing on the page "General"? On my Iphone, it only show "About" and "Usage" . Please help.

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Can my family use 'find my iphone' for each other if we each have separate apple ids? recently had to create separate ones b/c we were getting each others texts/facetimes and i read this happens when you share an apple id.

Can my family still use the 'find my iphone' app from our iphones / ipod touch to locate each others phone if we have separate apple ids? We were sharing a single apple id but recently we started getting each others texts/facetimes .. I read that this happens when you share an apple id. Will we just have to sign in with the others' apple id to locate their phone ?

Use Find My Friends app instead. Much easier to manage, and you won't need each other's id/pw's to do it. They only need to accept your invitations and vice versa.

My kids share use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share but not have to see each other's apps, contacts, etc?

My kids use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share the id (my email address) but not have to see each other's apps, contacts, etc? I'd rather share I think, but don't want to create a nightmare for myself. Also, I already have a kindle app (with purchased content) for my computer - does getting a new id for itunes change my ability to access my kindle account on my ipad? Thanks!

So first I'd say that it's not a good idea to start a new apple id if you have a large purchase history. You may not transfer purchases between apple IDs. You should consider some other options listed here http://support.apple.com/kb/HE37 Primarily the option where you or your children have seperate icloud accounts/email accounts that sync their contacts apart from yours. You may use your apple ID for purchases and use a different one for icloud/email/etc.

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

CPU-Upgrades: can Sonnet and PowerLogix Firmware live next to each other?

Similar Messages

Maybe you are looking for