Cpu usage monitor

Hi there!!!
Can anyone help me???
I have seen and had running a labview tutorial which moniors the cpu usage, like the task monitor in windows.
Now that i have an application for it, i cant find the tutorial again!!!!
Can anyone send me the link please??
It uses active X commands i think!
Any suggestions would be very helpful!!!
Pete

Hi,
here is the link.
http://zone.ni.com/devzone/conceptd.nsf/webmain/307935cae96229ec86256d3600716325
Hope it helps,
Peter H.
Applications Engineer.
NIUK.

Similar Messages

Where is the cpu usage monitor in LPX?

Hi everyone,
Perhaps I missed something, but I don't find the cpu usage monitor in LPX. Anyone?

Hey there you need to customise (change mode) the Control Bar and Display by right clicking on the icon on the far left of the LCD display.
If you choose Custom you can select the CPU and HD usage meters in the customise drop down menu when you right click in the display .
hope this helps.

CPU usage monitor. COOL!

Check this out guys!
http://www.apple.com/pro/tips/activity_dock.html

If you have the Mid 2011 model iMac as you indicated then there is no way for it to be out of warranty. The Mid 2011 iMac was introduced in May 2011, which means that all of the Mid 2011 iMac's shipped so far are still under the 1 year hardware warranty. In fact, if you are under the 1 year warranty you can still buy the AppleCare Protection Plan if you want to.
If you have the older Mid 2010 model then your system probably is out of warranty.
Since you've been inside your iMac did you happen to notice whether there is a tiny two wire cable plugged into the connector end or the hard drive along with the standard SATA cables? The two pin cable is unique to each brand of hard drive, and must be properly plugged into the hard drive and the logic board. You can see a sample picture of the temp sensor cable at the URL below. If the cable is disconnected, damaged, or incorrectly connected then you will experience the fan ramp issue.
http://www.powerbookmedic.com/iMac-27-Hard-Drive-Temperature-Sensor-p-21364.html
Since you already have the iMac open please be careful. The power supply retains a charge for some time after it after the iMac has been disconnected from AC. I zapped myself once while experiement with an iMac, and it's not something I want to do ever again.

Which Is the Best App to Show CPU Usage by App?

ActMonitor by Aeonika ($.99) and System Activity Monitor by Recession Applications LLC ($1.99) are the 2 activity monitors with 5 star ratings. However, the info available for each in the App Store and their websites failed to show whether either measured each open and background apps CPU usage individually.
Knowing that info is the only way we'll get to the bottom of iOS 7.1's higher battery usage.
Does anyone know of a CPU usage monitor that does give us individual app CPU usage?

Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini

MBP with 10.6.8: CPU usage high, no responsible processes shown in Activity Monitor. What causes this?

After using my computer for some time, CPU usage climbs to about 90% (ca. 65% user / 26% system) and fans run at high speed, but there is no processes that seem to use CPU (other than Activity Monitor itself ~1%).
This has happened a few times recently. It happens when I've used my computer for some time, hours or a couple of days (I usually put my computer to sleep when not using it but rarely shut it down). I've tried to quit all running apps incl. Growl, Dropbox, and anything that could be responsible to this but with no results. Putting computer to sleep for a long time doesn't help, cpu usage will climb instantly after wake up. Restarting system is the only thing that helps.
Most of the time I use my laptop with external monitor, lid closed and connected to power supply. When experiencing this, opening the lid causes fans to slow down, but CPU usage remains high and battery drains quick.
Any ideas what might cause this?
My MBP is 15" model with Core 2 Duo 2,66 GHz (MacBookPro 5,3), OS X version is 10.6.8, all available updates are installed.

Perform a SMU reset.
https://support.apple.com/kb/HT3964
Remove the anti-virus, it's running a root level process all the time that's taking your CPU and it's not necessary as there are no Mac viruses, Apple has the trojan angle covered already.
Always on anti-virus on a Mac is always a source of problems, also is MacKeeper, uninstall that here if you have it.
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
If you need to clean the Windows filth off PC files, then use the free, run as you need, ClamXav.
http://www.clamxav.com/
It seems your machine is used in a corporate enviroment, thus likely a rule that anti-virus must be used, you can avoid high CPU usuage by using the ClamXav instead.

Is there a way to monitor CPU usage during the execution of a vi?

I am wondering if there is a way, using LabView, to monitor the CPU usage during the execution of a vi. I want to be able to programmatically adjust the program controls based on the CPU usage. This program is designed to run all day in the background.
Thanks!

JAI wrote:
> I am wondering if there is a way, using LabView, to monitor the CPU
> usage during the execution of a vi. I want to be able to
> programmatically adjust the program controls based on the CPU usage.
> This program is designed to run all day in the background.
>
> Thanks!
There are at least two Windows tools you can use to see CPU usage
(depending on what version of Windows you have). The Task Manager
(ctrl-alt-del) has a panel that shows CPU usage. There is another
program that has more options as to what to watch. Under W2K, it is in
the Administrative Tools in the Control Panel and is called Performance.
Play around with adding various new "Counters".
Another option is to measure CPU usage programmatically. George Zou
has a tool that makes the appropriate dll call. Check out
http://www.geocities.com/gzou999/index.html
Regards,
Dave Thomson
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Developer
Certified Instrument Driver Developer
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected]
There are 10 kinds of people: those who understand binary,
and those who don't.

When I run activity monitor with no programs running my dock shows fluctuating usage...between 4% up to 20%. Random figures that come and go with corresponding CPU usage. A little help?

My activity monitor show random and fluctuating CPU usage at the Dock site with absolutelyno programs running. %'s fluctuate between 3 - 20 and they pretty much come and go. What might be causing this?

There's a lot of background processes running that aren't documented as Apps as such. And some of them are the Time Machine backups, Spotlight searches, all kinds of small little bits of maintenance caches, there's a lot going on. So it's not completely out of the question that this is 'normal' for a Mac. If it were 50% or more I would be concerned but if it spikes up to 20% for a second or two you are probably not in any trouble of any kind.

Feature request: Monitor, manage IE - CPU usage

I was wondering if this is the right place to make a feature request. As it happens when surfing with IE, having many tabs open, pretty quickly CPU usage can reach 100% even on multi core system. Presumably some website manage to run out-of-control scripts
in the background.
The real problem is now that I cannot tell which tabs produces which CPU load. All that task manager shows is the IE process with the tabs and the overall CPU usage for the process.
Regarding monitoring it would help to identify the tabs (website) which cause the heavy load. This could be added to task manager.
Further, to manage the tabs it should be possible to either start each tab in its own process
or perhaps better, have the ability to put unused tabs in 'hibernation' causing all scripts to pause there.

Hi,
you can post 'feature' requests to the IETeam at
http://connect.microsoft.com/ie
Task Manager in current windows versions lists all IE Tab processes.... Sort the process list by cpu usage to identify hungry tabs.
Typically high cpu usage is caused by
Web browser addons, incorrect browser settings (use gpu instead of hardware rendering) and flash or poorly designed websites or missing updates to your windows or third-party software. You may like to try running your browser in noAddons mode to see if that
makes a difference in cpu usage.... and also ensuring that you have enabled Windows Updates and that your computer has the latest updates from MS, Adobe etc.
MS has no control over what addons a user has or installs on their machines.
Post consumer questions about IE or windows to
http://answers.microsoft.com (Help>Online Support menu). Include with your questions the full links to any websites that you are having issues with....
Always... the first step in troubleshooting web browser issues is to test in no addons mode.
Rob^_^

What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble ?

We use win2003,win2008,win2012 servers.
I heard somewhere that Microsoft recommendation threshold of disk usage monitoring is ( free disk space >= 15- 20 %) , if I remember correctly, but how about CPU usage and memory usage monitoring ?
What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble and improve availability ?

Hi,
You can refer the following Performance Tuning Guidelines,
Performance Tuning Guidelines for Windows Server 2003
http://download.microsoft.com/download/2/8/0/2800a518-7ac6-4aac-bd85-74d2c52e1ec6/tuning.doc
Performance Tuning Guidelines for Windows Server 2008 R2
http://blogs.technet.com/b/josebda/archive/2010/08/27/performance-tuning-guidelines-for-windows-server-2008-r2.aspx
WINDOWS SERVER 2012 - PERFORMANCE TUNING GUIDELINES
http://blogs.technet.com/b/itprocol/archive/2012/11/27/windows-server-2012-performance-tuning-guidelines.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Newbie having problems with noisy fan and high CPU usage in Activity Monitor

I am new to the world of Apple and have got my hands on a hand-me-down PowerBook G4 version 10.4.11. It works fairly well for everything but the Internet.
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube or even moving from page to page. I'e tried loads of stuff including repairing disk permissions, emptying caches and relaunching finder when the preferences file is on the desktop (not really sure what that was supposed to do).
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly. I have got temperature monitor downloaded now although I already know it is getting very hot.
PS when it heats up the fan turns on because I can hear a whirring sound...
Would really appreciate some insight into this as it seems to be a good runner otherwise.
PS2 I have loads of free space left in the disk usage tab in activity monitor.
Big thank you in advance

Welcome to the world of PowerBook!
One of the first symptoms i noticed was that watching stuff on youtube was slow and jumped a lot. I checked a few things out and looked the CPU usage in activity monitor and this was about 80% to 100% when on youtube
Virtually no G4s are dealing well with web video anymore. The video technology used by modern developers puts a huge strain on a G4 processor. As this a choice made by coders, there is not much you can do about it. Some people suggest adding RAM but the effect is marginal considering it's the processor that's taxed.
Notebooks get hot. The fans in my 1Ghz 17-inch PowerBook from 2003 kick in between 130 and 140°F. The danger point is not until in the vicinity of 100F so don't sweat it to much. Make sure you do not cover the case bottom by setting the computer on a thick cloth placemat, pillow or other bedding item, or on your lap without a lapboard. The bootom of the case is part of the heat dissipation system and needs air under it to work
A lot of PowerBooks have, by now, lost some or all of their "feet" that gve a little space under the case. Don't bother looking for official replacements--get the silicone door/drawer bumpers from the hardware store that stick on. I found some about 3/16" thick that let more air under my PB thatn the mostly missing originals.
The next thing I discovered was that if i disconnected the laptop from the mains and played youtube and some other applications the whole thing would go into sleep mode very quickly
Your battery is likely dead from old age. Batteries only last about 2-3 years. You are seeing a sign of the battery lacking sufficient remaining capacity to run the computer. Get this utility:
http://www.coconut-flavour.com/coconutbattery/
(you'll need the 2.6.6 version for Tiger) and post what is says about "Health" and "Cycles."

How to monitor CPU usage and performance on a Hyper-V server with several VM's

I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system.
I have set up three Virtual Machines, all running Windows 2008 32 bit.
Build server, running Team City
Staging server
SQL Server, running SQL Server 2005
I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.)
So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

First, you have to remember that in Hyper-V that the "host" is called a parent partition and it really just like a virtualized guest with special permissions and roles. Just like any other child/guest, when you open up Task Manager, you can not see the CPU
usage of the other children on the server.
Ben Armstrong has a good explanation of this here:http://blogs.msdn.com/virtual_pc_guy/archive/2008/02/28/hyper-v-virtual-machine-cpu-usage-and-task-manager.aspx
To summarize his post, you need to check three things to get an accurate picture of CPU utilization:
View the CPU usage on each guest - this is available through Hyper-V Manager or Performance Monitor.
CPU usage due to context switching - this is the perfmon counter called % Hypervisor Run Timeunder Hyper-V Hypervisor Virtual Processor
Child partition worker process - vmwp.exe running on the parent partition (1 per child). This handles Hyper-V operations like saving
state.

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

I think you should review what you wrote. There is no question, hence, my reply. I can't tell by the AM listing what applications are using memory. You need to click on the Real Mem column once or twice to display in descending order.
Aside from what you see in AM, what exactly is your problem or perceived problem. You are very low on Free Mem at the moment the screen shot was taken. Those displays are not depicting your computer's instantaneous memory usage.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Memory Usage Performance Guidelines- About the Virtual Memory System
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

Kernel_task high cpu usage when using external monitor at 1080p

Specs
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i7
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f15
My external display is a Samsung PX2370 connected to my MBP using an HDMI cable with a HDMI-to-miniDP adapter
I first noticed this after the last EFI update several months back. At first I thought kernel_task eats up too much cpu cycles whenever an external display is attached, but it turns out this only happens when the external display is set to 1080p. When external display is set to 720p, kernel_task is pretty much normal (~5% cpu usage) but rises up to ~150% cpu usage once the external display is set to 1080p.
kernel_task cpu usage is also with normal range when my MBP is connected to a Samsung LCD TV at 720p.
Anyone having the same problem or know of any fix/workarounds?

Seems like the problem persists when playing a 720p video on the external display set to 720p. To sum it up
Video Resolution
Main Display
External (1280x720)
External (1920x1080)
480p
ok
fluctuating kernel_task cpu usage (~5 to ~150 cpu usage)
high kernel_task cpu usage
720p
ok
high kernel_task cpu usage
high kernel_task cpu usage
1080p
ok
high kernel_task cpu usage
high kernel_task cpu usage

SQL Server 2012 - RESOURCE MONITOR / PREEMPTIVE_XE_CALLBACKEXECUTE high CPU usage

Hello,
We are currently in the process of migrating an existing clustered SQL Server 2008 R2 instance over to a clustered SQL Server 2012 instance as we phase out the Windows Server 2008 with SQL Server 2008 R2.
The setup is identical for the SQL Server 2012 instance as it is on the SQL Server 2008 R2 instance. (meaning the RAM and CPU are both the same or better on the SQL Server 2012 instance)
The process in which we are migrating is that we're moving a few databases over to the new SQL Server 2012 instance each night. What we've noticed is that the CPU usage is much higher on the SQL Server 2012 instance than on the previous
SQL Server 2008 R2 instance even though the there is only 1/2 of the databases migrated to the 2012 instance.
Running the following script:
;with cte ([totalCPU]) as (select sum(cpu) from master.dbo.sysprocesses)
select
tblSysprocess.spid
, tblSysprocess.cpu
, CONVERT(BIGINT,(tblSysprocess.cpu * CONVERT(BIGINT,100))) / CONVERT(BIGINT, cte.totalCPU) as [percentileCPU]
, tblSysprocess.physical_io
, tblSysprocess.memusage
, tblSysprocess.cmd
, tblSysProcess.lastwaittype
from master.dbo.sysprocesses tblSysprocess
cross apply cte
order by tblSysprocess.cpu desc
Produces the following results:
In a clustered environment, is this normal and if not, does anyone know what this means or how to reduce the CPU usage?
Thanks.

Hello,
The following query may help us identify extended events or audit configurations running on that SQL Server server that are producing that high CPU usage scenario.
SELECT
s.name
AS 'Sessions'
FROM
sys.server_event_sessions
AS s
WHERE
s.name
<> 'system_health'
and s.name
<> 'AlwaysOn_health';
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Firefox is eating up between 90% CPU usage to %230 CPU usage, while on a text-only page. I've tried many of the fixits. They didn't work. What can I do?

I've cleared cookies multiple times
I've emptied the cache
I cleared my download history, and a majority of my browsing history
I've tried having hardware acceleration for both flash and firefox on and off
I turned off all my apps and plugins and when that did nothing I turned back on the ones I need. I never had a lot of apps to begin with. only a max of 5. I had quite a few plugins, but i disabled all but quicktime, flash, and silverlight. I have those three set on "ask to activate" so none are "always active" anymore.
I also tried a couple things from the FAQ and forums here about changing a few settings in the "about:config" setup.
A few of the above things initially worked, but after a day or two it'd be back to sucking up my CPU and memory. I would then try the same thing again, and this second time there would be no improvement.
The real memory will fluctuate between 200 MB and 1.7 GB, and has done so for quite a while.
Even after I've left streaming sites, and sites with lots of images, and I'm not downloading anything, the memory and the CPU will still do that. I only have a handful of tabs open at a timeusually, and all of them are mostly text. I'll quit and reopen firefox, which will initially bring the memory and CPU usage down, but it inevitably climbs up quite quickly, regardless of my tab usage. It'll be the same if I'm playing a flash game or scrolling through blogs.
I never had any of these problems with Firefox 23, and my internet usage habits haven't changed at all. I had some of this slowness a few times with version 24, but nowhere near as bad as this, or as constant. Almost everyday I end up googling for other ways to speed things up. Everything I do never slowed down Firefox on earlier versions.
I've tried all my usual tasks on Safari which will never climb above 30-40 MB of memory, even on netflix streaming, or flash games, and the CPU will average around 8 and 11%.

i'm also having major CPU problems w/ FF 29.0.1. when i restart the app it calms down again but after loading tabs it steadily climbs up to 100% after not too long. i have checked out the 2 CPU links/articles above and do all the basic troubleshooting and tips, but with all the FF tools & add-ons isn't there some sort of CPU monitor that has the ability to display which extensions/scripts are hogging the CPU? Activity Monitor on Mac just shows the total used by the app. it's impossible in my case to efficiently disable dozens of add-ons & scripts, restart, and test each one by one b/c it can take several hrs before the CPU starts to spike high again. i have no time for this.
thanks

Cpu usage monitor

Similar Messages

Maybe you are looking for