CPU voltage on Delta-ILSR

Is there anyway configurations, software, etc... to give my CPU more power? 1.8volts will not let me get any higher than 2300 with stability. If not lets all beg MSI to add higher Vcore in next bios  :D

The latest BIOS' 7.3 and 7.4 for the K7N2-ILSR Delta has solved the CPU Voltage prob - I'd imagine that they fixed this prob with new BIOS versions on other K7N2 boards too.
Here's hopin'

Similar Messages

  • G4Ti4200-VTD64 voltage incompatibility with MSI K7N2 Delta-ILSR??

    Hello,
        I have the MSI G4Ti4200-VTD64 (4X) video card..  I want to upgrade my motherboard to K7N2 Delta-ILSR. Is there any voltage incompatibility?? I heard that new mother boards will support only AGP 1.5V. Is the AGP voltage of K7N2 Delta-ILSR 1.5volts??  Is my video card compatible with this voltage?? I really want to retain my current video card as I am quite satisfied with it and I'm not willing to invest on a new one at the moment. If there is an incompatibility could you suggest another Socket A MB with good performance and SATA RAID support.
    Thanks in advance
    Regards,
    Joseph

    Joseph,
    All 4X Vid Cards work on all 4X and 8X mobos. All 4X mobos work with all 4X and 8X Vid Cards.
    Take Care,
    Richard

  • Someone plz help me with my k7n2 delta-ilsr

    Hey everyone,
            I just put my sytem togother and ran into a problem.  I got the system to boot up just fine.  It was not until I tried installing windows xp proffesional that  I ran into problems.  The installation process runs pretty smoothly, until the computer reboots to run windows for the first time.  After it reboots the windows logo appears and the after 2 seconds or so, a blue screen appears saying that windows was shut down to prevent any damage to my computer.  I have never encountered this problem before when I built other systems.  The screen suggests that I should check my HDD's for viruses or check to see if they are configured correctly.  The HDD's are SATA and I have them set up in RAID 0 mode and yeah I installed the RAID drivers during the installation process.  Thinking that I had made mistake setting up the SATA drives, tried installing windows using a regular IDE hard drive and it gave the same message.  I am stumped anybody have any ideas of what I might be doing wrong?  Any help would be appreciated .  My system specs are below.
    MSI k7n2 delta-ilsr mobo
    AMD 3000+ Athlon XP cpu (333 fsb)
    ATI Raedon 9000 ( I know it's crappy , I'm still saving up for the ATI all in wonder 9800 )
    x1 kingston 512mb pc3200 DIMM
    x2 maxtor 80gb maxtor hdd's
    x1 regular cd-rom drive
    x1 floppy drive
    420w raidmax psu
    (+3.3v = 26A, +5v = 32A, +12v=13A)

    Memory that comes with timing of 5 2 2 2 or 6 2 2 2 or usally winbond BH-5 memory chips. Ones with 5 3 2 2 or CH-5 winbond chips. The BH-5 chips overclock a little better than the CH-5. (Muskin uses BH-5 winbond in there black ram)
    Winbond is no longer making BH-5 chips but is going to make a limited run of them as demend is high for them.
    The first number shown here is the Traz and it controls the flush timing bench testing is showing that a higher number of 9, 10 or 11 or getting better bench results than the 6 or 5. Thats with Dual Channel memory.
    The timing you show probly should be something  like 8 3 3 3 or 8 3 3 2.5 unless it is there faster Dual channel ram.
    The timing numbers can also appear like this 2 2 2 5 the high number is the Traz either way.
    Look on your memory manufactor web site for the timing that if should run at also look at the voltage as this can make a big differance.

  • Sudden Restarts MSI K7n2 DELTA ILSR

    I've had this setup for about a year now.
    Sudden restarts now plague my system, no virus found per NAV 2004, ran processor burn in wizard, SISOFT sandra, on cpu arithmetic and cpu multimedia setting, 100 cycles (no problems) windows memtest ran with no errors via start up disk full cycle of tests.
    Have reloaded video drivers,to no avail, this happens about once a week, any ideas????
    MSI k7n2 delta ILSR Bios version 7.7
    1.5 Gig Micron PC 3200 (512x3) RAM supporting dual channel stock voltage
    mixed bag o ram, crucial, micron technology, and, patriot
    Athlon xp 2500  stock voltage
    SLK 900A heatsink with 80 mm tornado (temps at idle 35-38c) (42 load)
    Creative SB Live
    Nvidia 256  mb asylum video card GE FORCE USR DATA PCI FAX Modem (V92) 5610b
    Hercules 420W PS
    All drivers are up to date and windows update run regularly (Win XP Pro SP2)
     [/COLOR]

    Quote
    Originally posted by scooter787b
    well for one thing the k7n2 series can only support 2 pc3200 dimms,
    are you really sure ?
    my motherboard which is rather old now supports 3 pc3200 dimms.
    norton antivirus is CRAP.
    i stopped using it when i found my harddrive was full of viruses.
    try avg6 for example which is free.

  • MSI K7N2 Delta-ILSR Wont boot up (no display no bios)

    Hi
    i bought a AMD Athlon XP 3200+ & MSI K7N2 Delta-ILSR.
    unfortuntly i can't boot it. it wont show anything on screen.
    i have tried anything i red in this forum (clear cmos... safe mode jumper...strip all parts...)
    all i get is : 
    blank black display, no beeps and keyboard lights flashes over and over (when connected to a KVM hub), when conected directly to keboard the lights flashes only once but stil black display and no beeps (i hear on speake,when powering up PSU, a silent short noise, no beep).
    power suply turns on (new one 500w), i tried agp video card and replaced with pci video card.
    memory is kingstone 512mb pc3200 400MHz x2, i tried only one of them and both in diferent sockets.
    cpu: AMD xp 3200+ 400fsb.
    i did succed to go into bios only once, after lots of resets and shutdowns and bios clear (after ouers)
    i choosed in the bios: load bios defaults, and thats it. i hoped it starts up but nothing.
    i did all testing i know (checked all pins, cables, clear cmos...all, you name it)
    all parts are brand new (except motherbord. it's seconds hand from eBay. i've bean talled that it works fine)
    i also e-mailed MSI support that question. (2 days ago. no answer yet)
    oh...and i have a pci POST diagnostic card and its 7seg display don't shows any numbers, only when once i succed to get into bios. i don't have the msi original D-Breket addon diag.
    can you help me? 

    hi guys
    here is my PSU specs:
    Colors-It 500w-Max Silent ATX Power Supply
    Voltage 115/230V
    Current 10A/5A
     Frequency 60/50Hz
    +3.3   +5    +12   -12     -5      +5SB   BLK    GRN    GRY
    30A    50A  15A   1.0A   1.0A   2.5A   COM   P-ON   PG
    connectors:
    ATX-2.03 Connector: 1
    ATX-12V Connector: 1
    CD-Rom/HD 4 Pin connector: 6
    Floppy 4 Pin Connector: 2
    Serial ATA Connector : 1
    cpu: AMD Athlon XP 3200+
    MotherBoard: MSI K7N2 Delta-ILSR   More: http://www.msicomputer.com/product/p_spec.asp?model=K7N2_Delta-ILSR&class=mb
    Memory: kingstone 512mb pc3200 400MHz x2      More: http://www.ec.kingston.com/ecom/configurator/PartsInfo.asp?ktcpartno=KVR400X64C3A/512
    i have other brand of memory moduls (micron pc2300) i tried them too. no go.
    i tried other PSU, i pulled from my brothers pc (amd xp 1400+).
    as i said before, i have  pci POST diagnostic card so it could tell me any problem. iguss it's the mobo, posibly bios upgrade.
    but if mobo not showing bios, i can't update bios from floppy.
    and the tested the mobo out side the case on a antistatic mat and i useed an antistatic strip.
    as i said i could get into the bios once, after many resets....choosed 'load bios defaults..', restarted and.....no go.

  • MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

    Hi, i have major trubble.
    Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
    Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
    I've got the latest bios ver. 7.8 but no difference
    AMD XP2800+
    Kingston 2x512mb
    ATI Saphire Radeon 9600pro 256mb
    Soundblaster Live Value
    XP pro sp2
    MSI K7N2 Delta ILSR (MS 6570)

    I went to JME-Data and purchased an
    True430
    ATX 430 Watt Power Supply with PFC
    For AMD™ and Intel® systems including
    Pentium® 4
    Dedicated output circuitry
    Voltage feedback
    Antec Low NoiseTechnology
    AQ3 - Antec 3 year parts & labor warranty
    True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
    Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
    The prise 1099:-
    And everything works great, Thank you very much for the tip. :-)
    No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
    Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
    Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
    Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

  • K7N2 Delta-ILSR + FX5700-256td = PC Shudown and Lock

    i play a Doom 3 demo or Morrowind and in the short while to be playing the computer it is extinguished
    MSI K7N2 Delta-ILSR (v7.8 Bios)
    MSI FX5700-256td (last bios)
    AMD Sempron 2600+
    512 DDR
    300W power
    WinXP SP2, Suse Linux 9.1
    all patch´s and last drivers for all OS
    I look the 8X AGP dont work...
    4X Agp works... Im proving now

    AMD Athlon Sempron 2600+
    MSI K7N2 Delta - MS-6570
    MSI FX5700-TD256
    System BIOS : 08/02/2004-nVidia-nForce-6A61BM4CC-00
    Memory: 512MB 16x(32Mx8) DDR-SDRAM PC3200U-2533-600 (CL2.5 up to 200MHz)
    HD: 80G SATA
    Voltage Sensor(s)
    CPU Voltage : 1.55V
    Aux Voltage : 1.63V
    +3.3V Voltage : 3.25V
    +5V Voltage : 5.03V
    +12V Voltage : 11.98V
    -12V Voltage : -12.03V
    -5V Voltage : -5.15V
    Standby Voltage : 4.97V
    AGP Bus(es) on Hub 1
    Version : 3.00
    Speed : 4x Fast-Writes Enabled : No
    Isochronous Mode Enabled : No
    Addressing Enabled : 32-bit
    Aperture Size : 128MB

  • Fluctuating CPU voltage

    Hi
    I have a MSI K7N2 Delta-ILSR (MS-6750) motherboard with an AMD Barton XP 3200+ CPU & 2 x 512Mb PC-3200 RAM.
    Of late, it has started crashing with monotonous regularity.  I have tried everything I can think of to identify the cause - without any success.
    Today, on the off chance that it would make a difference, I decided to experiment with dropping the FSB speed from 200MHz to 166MHz.  Before doing so, I ran CPU-Z to check the speeds.  I happened to notice that the CPU Voltage was fluctuating between 1.60v & 1.664v.  pcAlert4 shows the same thing - the other voltages are shown as 3.33v, 4.95v & 11.88v and seem rock steady.  I have never noticed this fluctuation in CPU Voltage before, but haven't really looked.
    Does anyone have any idea why this might happen?  I am guessing that there is a problem with the VRM on the motherboard.  Does anyone have any suggestions as to whether I can do anything about this?

    A brief update before going to bed:
    The system has now been up & running for a little under 9 hours - which on recent experience is pretty darned impressive!
    However, I have dropped the CPU FSB speed from 200MHz to 167MHz (according to CPU-Z) - the RAM is running at 5:6 i.e. 200MHz.
    When I tried to run "ORTHOS" (v0.41.110.18) with the default "Blend - stress CPU and RAM" test, it halted after less than 30 seconds:
    Quote
    1:FATAL ERROR: Rounding was 0.5, expected less than 0.4
    1:Hardware failure detected, consult stress.txt file.
    1:Torture Test ran 0 minutes 25 seconds - 1 errors, 0 warnings.
    1:Execution halted.
    1:FATAL ERROR: Rounding was 0.4997816086, expected less than 0.4
    1:Hardware failure detected, consult stress.txt file.
    1:Torture Test ran 0 minutes 28 seconds - 1 errors, 0 warnings.
    1:Execution halted.
    I ran the "Small FFTs - stress CPU" test, it kept going for just over 20 mins. before crashing - I assume that this stresses the CPU but not the RAM.
    Quote
    1:FATAL ERROR: Rounding was 0.4959945679, expected less than 0.4
    1:Hardware failure detected, consult stress.txt file.
    1:Torture Test ran 20 minutes 15 seconds - 1 errors, 0 warnings.
    1:Execution halted.
    I have now been running the "StressCPU" test on ORTHOS for 3½ hours without problem - I will leave that running overnight and see if it keeps going before experimenting with single sticks of RAM tomorrow.
    It does seem as if the problem relates to the memory.  However, I don't think that it is this particular memory since I was previously using 2 x 512Mb Geil sticks and had all the same sort of problems with that.
    I don't understand why reducing the CPU FSB from 200MHz to 166MHz should have made the system more stable since I have left the RAM running at 200MHz in DDR mode.

  • [nForce] K7N2 delta ilsr doesnt post

    I am using this mother board with ati radeon 9000 for 2 years. Today i bought a new msi rx9550 video card
    I installed it and power up but it didnt post
    no signal and no boot
    i put on the old radeon 9000 and i booted without any problem
    new 9550 works fine on another computer with old psu
    any suggestions ?

    no signal no post
    fans spins hdd and power light are ok
    i tried it with a good psu today no way it doenst post
    i also updated the mobos bios with modded bios version which i found in this forum
    i tried with asus and sapphire 9550 cards and no boot again
    but it boots with radeon 9000
    i also tried a cooler master psu with 18A 12v rail but nope
    it does not post with any radeon 9550 cards
    i removed all psu connections to hdd dvd ect and  only let mobos connection
    no boot again
    in the bios agp voltages seems to be shift between 1.5 1.6 and 1.7
    no 0.8 for agp 8x
    might it be a problem?
    I am realy disappointed with this mobo 
    i bought it 2 years ago because i tought this mobo can be used for long years 
    heh
    I am desperetaly seeking your suggestions 
    my computer:
    msi k7n2 delta ilsr mobo
    2x256 oem ram
    80gb seagate sata
    40 gb seage ide
    64mb ati radeon 9000 video card
    amd athlon xp 1800+ cpu
    msi  dvd rom
    nec dvd writer
    and an psu with 4pin 12v rail

  • Upgrade to K7N2 DELTA-ILSR help

    Thinking of purchaseing the K7N2 DELTA-ILSR board and would like some help verifying the hardware i have not having any problem with this mobo.
    AMD|2800/333 ATHLON XP BARTON
    MEM - DDR Corsair dual 512MB X2 KIT|VS1GBKIT333
    Soundblaster 5.1 Platinum
    Liteon 52x32x52 r\rw
    80GB|SEAGATE ST380011A 7200
    60GB|SEAGATE ST360015A 7200
    PSU- Super-Flower Silent TT aluminum 450W ATX power supplyTTGI TT-450SS (450W). AC Input: 100~120Vac/200~240Vac, 10/6A, 60/50Hz. DC Output: +3.3V~28.0A, +5V~42.0A, +12V~18.0A. +5Vsb~3.0A, -5V~0.5A, -12V~0.8a). MAX OUTPUT POWER: 450W. Cooling: Air convention by +12V DC fan. 10 IDE connectors, 2 floppy connectors, +12V power connector, Aux power connector
    CPU FAN - OCZ GLADIATOR 3 Socket A/462 up to Athlon XP 3200+. Single-piece pure copper construction. Dimensions: 60x60x30mm. FAN: 60x60x25. Medium-speed. Or: 60x60x25 Quiet. High-speed. Voltage: 12 Volt. Ball bearing fan
    Video Card - Chaintech VGA GF FX5700 SA5700 256M
    It looks like a great board and i see some great reviews but also see alot of small issue with compadability. It looks like the 1st thing is to upgrade the bios, and hope i don't have any issue with my cable modem box (guess i could put my old network card back in and disable the mobo's built in net work if there is problems).
    I don't do O\C so nothing to worry about there. My old board is an Epox and is max'd out with no future upgrade room, so that's why i'd like to upgrade.
    Thanks for any help guys.
    rider

    rider45,
    If you do not need the Break Out Box from the Platinum, I would go with the onboard nVidia SoundStorm. It sounds better than the old Live! and uses less CPU Cycles.
    Take Care,
    Richard

  • Do I have a K7N2 Delta-ILSR????

    Its my understanding that the K7N2 Delta-ILSR has the MCP2-T chip, but the chip I have where the MCP2-T should be has a label on it that says "MSI 400 FSB". So is this mobo a K7N2 Delta-ILSR or not? The only thing that I find printed on it is K7N2 and MS-6570 Ver 1.
    Thanks for any help.
    MM

    Quote from: osnavi on 21-September-05, 12:08:48
    Then ? What about the MAX AMPS. asked ?
    Yes you did ask for the AMP ratings. I spent 29 years trouble shooting high-end solid state equipment where incorrect voltages wreak havoc on IC chips so I assumed that is what you really wanted to know.
    A power supply is going to handle the required current or its not.  If it can't handle it, shuts down. (Isn't there a question on the A+ certification test that address this? Jack adds a hard and the PC won't power up. Why? Answer: C. The power supply is too small.)  So why is Max AMP so important in trouble shooting my problem? I also think that Dr. Stu's Statement "if there is not enough current on the 12v rail, then the CPU cannot start" is incorrect. Basic ohms law: you need VOLTAGE and a LOAD (CPU) first to have current.
    The max AMP rating for my PU is as follows +3.3v=35amp, +5v =28amp, and +12v= 22amp. The supply is out of an Avaya sever cabinet with no brand name on it. As I posted in an early post, "The power supply tests good". This is an assumption that I made because I just built a Pentium 3.4Gig a few days before I took on this project. But just to be sure I got out my oscilloscope with a current probe and a load box (light bulbs and a potentiometer) and tested each supply lead. The amp's far exceeded the ratings before the PU shut down each time.
    So now back to my question from an early post: My POST card is telling me that the BIOS is stuck in "Reset" Does the BIOS get the reset from the CPU or does it come from the external short?

  • K7n2 delt ilsr instabilty problem update

    have a k7n2 delta ilsr have an issue where it is unstalble ie get bsod at welcom  etc at 400 fsb ie 200 setting in bios will run at 166 in safe mode the 3200 cpu is reconised as at 2.39 ghz it should be 2.2 ghz if i run cpucz it says the multiplier is *12 is this a motherbord fault have updated bios too 7.8 latesed have tried diff make of memory power supply but i think the problem is looking me in the face in the fact that the cpu is reconised as 2.39 ghz and the muilt is *12 i think it should be * 11 can any body help regards bazer

    yes has latesd bios    AMD Athlon(tm) XP 2700+ here is some info pc wizard 2005
    Codename :   Barton
    Revision :   A2
    Technology :   0.13µ
    CPU ID :   6.A.0
    CPU IDEx :   7.A.0
     Features :   
    VME - Virtual Mode Ext. :   Yes
    DE - Debugging Extension :   Yes
    PSE - Page Size Extension :   Yes
    TSC - Time Stamp Counter :   Yes
    MSR - Model Specific Registers :   Yes
    PAE - Physical Address Extension :   Yes
    MCE - Machine Check Exception :   Yes
    APIC - Local APIC Built-in :   Yes
    SEP - Fast System Call :   Yes
    MTRR - Memory Type Range Reg. :   Yes
    PGE - Page Global Enable :   Yes
    MCA - Machine Check Architecture :   Yes
    PAT - Page Attribute Table :   Yes
    PSE36 - 36-bit Page Size Extension :   Yes
    PSN - Unique Serial Number :   No
    DS - Debug Trace & EMON Store :   No
    ACPI - Software Clock Control :   No
    SS - Self Snoop :   No
    TM - Thermal Monitor :   No
    HTT - Hyper-Threading :   No
    SBF - Signal Break on FERR :   No
    MON - Monitor/Mwait :   No
    DSCPL - CPL qualified Debug Store :   No
    TM2 - Thermal Monitor 2 :   No
    CID - Context ID :   No
    EST - Enhanced SpeedStep Tec...   No
    NX Bit - No-execute Page Protec...   No
    VMX - Vanderpool Technology :   No
     Miscellaneous :   
    FPU - Co-processor Built-in :   Yes
    CX8 - CMPXCHG8B :   Yes
    CX16 - CMPXCHG16B :   No
    CMOV - Conditionnal Move Inst. :   Yes
    CLF - Cache Line Flush :   No
    FXSR - Fast Float Save & Restore :   Yes
    DAZ - Denormals Are Zero :   No
    MMX Technology :   Yes
    SSE Technology :   Yes
    SSE2 Technology :   No
    SSE3 Technology :   No
    X86-64 Technology :   No
    AMD MMX Technology :   Yes
    3DNow! Technology :   Yes
    Extended 3DNow! Technology :   Yes
    3DNow! Pro Technology :   Yes
    SMP - MP Capability :   No
     Power Status :   
    Voltage Control :   No
    Frequency Control :   No
    Thermal Sensor Built-in :   Yes
     Addressing Information :   
    Physical Addressing max. :   34-bit
    Linear Addressing max. :   32-bit
     Mainboard Upgradebility :   
    Socket/Slot :   Socket A
    Upgrade interface :   ZIF Socket
    Supported Speed :   2200 MHz (or more)
    Supported Voltage :   1.6V
    al Information :   
    Performance Rating :   PR-3300 (estimated)
    Real Frequency :   2164.89 MHz
    Multiplier :   12x
     Front Side Bus Information :   
    FSB Frequency :   180.4 MHz
    Bus Speed :   360.8 MHz (DDR)
     Initial Frequencies :   
    Frequency :   2000 MHz
    FSB Frequency :   166 MHz
     Control Clock Frequency :   
    Type :   None
     Thermal Information :   
    Core Power :   63.42 W (estimated)
    Resistance :   0.46 °C/W (estimated)
     Processor Performance Information :   
    Throttle Mode AC :   None
    Throttle Mode DC :   Adaptive
    Current Configuration :   None
    Throttle :   2164 MHz
    CPU Throttle Temperature :   60°C
    CPU Shutdown Temperature :   100°C
    eneral Information :   
    A0 (RAS 0) :   256 (Single Bank)
    A1 (RAS 2) :   256 (Single Bank)
    A2 :   Empty
     Memory Controller Information :   
    Memory Controller :   Standard, EDO
    Number of connectors :   3
    Max. Module Size :   32 MB
    Max. Memory Size :   96 MB
    Supported Speed :   70ns, 60ns
    Supported Voltages :   5v
    Error Detection Method :   8-bit Parity
    Error Correction Capability :   Unspecified
    Current/Supported Interleave :   1-way/1-way
     Chipset Information :   
    Type :   DDR-SDRAM PC2900
    Frequency :   180 MHz
    FSB/RAM Multiplier :   1/1x
    Channels :   Dual
    ECC Diagnostic :   No
    CAS Latency (tCL) :   3 clocks
    RAS to CAS (tRCD) :   3 clocks
    RAS Precharge (tRP) :   3 clocks
    Cycle Time (tRAS) :   8 clocks
     Information SPD EEPROM (A0) :   
    Manufacturer :   Samsung
    Part Number :   M3 68L3223ETM-CCC 
    Serial Number :   F6016243
    Type :   DDR-SDRAM PC3200 (200 MHz)
    Size :   256 MB (1 rows, 4 banks)
    Module Buffered :   No
    Module Registered :   No
    Width :   64-bit
    Error Correction Capability :   No
    Max. Burst Length :   8
    Refresh :   Reduced (.5x)7.8 µs, Self Refresh
    Voltage :   SSTL 2.5v
    Supported Frequencies :   166 MHz, 200 MHz
    CAS Latency (tCL) :   2.5 clocks @166 MHz, 3 clocks @200 MHz
    RAS to CAS (tRCD) :   3 clocks @166 MHz, 3 clocks @200 MHz
    RAS Precharge (tRP) :   3 clocks @166 MHz, 3 clocks @200 MHz
    Cycle Time (tRAS) :   7 clocks @166 MHz, 8 clocks @200 MHz
     Information SPD EEPROM (A1) :   
    Manufacturer :   Samsung
    Part Number :   M3 68L3223ETM-CCC 
    Serial Number :   F6056193
    Type :   DDR-SDRAM PC3200 (200 MHz)
    Size :   256 MB (1 rows, 4 banks)
    Module Buffered :   No
    Module Registered :   No
    Width :   64-bit
    Error Correction Capability :   No
    Max. Burst Length :   8
    Refresh :   Reduced (.5x)7.8 µs, Self Refresh
    Voltage :   SSTL 2.5v
    Supported Frequencies :   166 MHz, 200 MHz
    CAS Latency (tCL) :   2.5 clocks @166 MHz, 3 clocks @200 MHz
    RAS to CAS (tRCD) :   3 clocks @166 MHz, 3 clocks @200 MHz
    RAS Precharge (tRP) :   3 clocks @166 MHz, 3 clocks @200 MHz
    Cycle Time (tRAS) :   7 clocks @166 MHz, 8 clocks @200 MHz

  • HELP me with my K7N2 delta ilsr

    Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
    When I start the pc from an off state, it runs up the fans and drives, but does not post.
    The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
    If I then press the reset button, the pc posts, and boots up just fine.
    It does this EVERY time I start up.
    I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
    I have asked a few questions on other forums, but I cant solve it.
    These are the suggestions so far.
    1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
    2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
    3. The cpu could be faulty? but would this not stop it running fuull stop?
    4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
    Im fairly new to the upgrade side of things, and I need some help with this one.
    Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
    HELP

    +3.3v 14A
    +5v 28A
    +12v 16A
    +5vsb 2A
    -5v 0.5A
    -12v 0.8A
    Hope this helps, as my pc seems to be living with its case off a lot these days..haha

  • Strange phantom restarts on MSI K7N2 Delta ILSR

    Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
    MSI K7N2 Delta ILSR
    Athlon XP 2500+ Barton
    1026 MB Kingston DDR RAM (2x512 Dual)
    Gforce 2 MX 200 AGP 4x
    WD 60 GB 7200 RPM

    I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
    I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
    Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
    If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
    Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

  • Data corruption on MSI K7N2 Delta ILSR

    Hi all,
    Just got my new MSI K7N2 Delta ILSR up and running.
    Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum  )
    While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
    Then the overclocking began   I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
    I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
    Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
    When using an FSB of 166mhz no data corruption or crc errors.
    What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
    Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
    The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
    Help!  
    gr,
    Remco

    Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended  
    Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
    Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
    Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome  
    gr,
    Remco

Maybe you are looking for