CPU whine with DVI and line out/DVI removed whine not in line out?

I have noticed that when using headphones or the line out alone I do not hear the whine noise. The whine noise is still active, in other words, I can still hear it coming from the keyboard. But, it is not transferred through the line out or headphone jack. THIS IS BEFORE I DO ANY TRICKS: mirror widget etc.
But, if I plug in the DVI adaptor and utilize the line out/headphone jack, the noise now appears. This means if I am running my laptop to do a presnetation, the noise will appear through the sound system. However, if I don't use my laptop for video and use it for audio only, the noise is not THERE!
Of course, I can use the tricks and it will eliminate it. But this leads me to believe that something is related? The DVI connection with the entire mother board....or something. Any comments? Please help

I agree. I never use line in/out of the computer for professional work. I had PCI expansion chassis doing that type of work when using the PowerBook, and am eagerly awaiting Magma's upgrades which will come soon per their emails. However, I do use my portable computer to teach and to present research, at which point lugging a full blown professional system is not an option. In some cases, it would be nice to use the line out while presenting, without having to carry additional equipment.
In any case, the problem does exist and is one that shouldn't exist. The fact that there are workarounds does not "fix" the problem or for that matter acknowledges it. Apple should acknowledge the problem and replace the faulty parts in the machines affected. I bet that if it was the other way around, say plugging something in the headphone jack would affect the screen resolution, people would be all over the place, and the solution could not possibly be, "just hook an external monitor and it will work fine".
In the meantime, I am just trying to find out if this is a widespread issue or not to see if it makes sense to return the machine, with which I am absolutely happy otherwise even with the other problems reported.

Similar Messages

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

I was trying to snyc with computor and now its frozen on do not disconnect

i was trying to snyc with computor and now its frozen on do not disconnect

NOTE: If the iPod is set to Manually manage music or Enable disk use, it will say DO NOT DISCONNECT until you eject the iPod. Just want to make sure it really is "frozen."
If iPod is frozen, you need to do a Reset on the iPod.
http://support.apple.com/kb/ht1320

HT4061 i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

Hi there itiago,
I would recommend that you take a look at the article below for more information on forgotten passcodes in iOS.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Hope that helps,
Griff W.

HT201263 Connection with Itunes and my Iphone 4s IOS7 is not possible.

Connection with Itunes and my Iphone 4s IOS7 is not possible. You can see in my iphone in windows explore. But still not the new Itunes for IOS7

Here's an odd fix that worked for me.(After trying restarting AMDS and uninstalling/reinstalling iTunes* to no avail.)
I swapped my current USB cable from it's usual port to one of the front ones. That prompted iTunes to, instead of stare blankly back at me, to force up the error message indicating it recognized an iPhone in Recovery Mode.
This switches iTunes to the Restore from backup screen and gets you back on your way.
* For anyone having trouble with files being in use when they try to manually delete the 'Common Files\Apple' folder, it works if you go into Safe Mode.

Socket mini DVI and projector DLP DVI

Hi,
I would want to know if it's possible to link the Projector Toshiba Mt200 (DVI) and the new Imac with mini DVI.
cheers
Andrea

I just checked the Apple Store web site--the video-out port on the 12" PowerBook is mini-DVI. The cable/adapter supplied with the 12" PowerBook is a mini-DVI to VGA cable and works with the Intel iMac. I have a 12" iBook G4, and when my Intel iMac arrives tomorrow, I will try out the cable. I'm guessing the iBook and PowerBook cable is identical, though the website says nothing about iBooks.
From the Apple Store web page:
"The Apple Mini-DVI to VGA Adapter is designed for use with the iMac (Intel Core Duo) and 12-inch PowerBook G4. Connect the adapter to the Mini-DVI port of the PowerBook G4 and the VGA end of the adapter to an external VGA monitor or projector. Both video-mirroring and extended desktop modes are supported."

Config Manager Agent - after Hardware Inventory High CPU Usage with WMIPRSVE and very fast empty Battery

Hi there,
since a few days there is on some machines (40-60) a high cpu usage on one core (quad core cpu machines) with the WMIPRSVE.EXE if the HARDWARE INVENTORY CYCLE started.
i try out some tests, read some forum articles and troubleshooting the WMI management but a real problem i doesn´t see.
in some articles i read that hardware inventory runs about minutes up to more hours but some machines runs longer, someone more as 1 day.
here an example of mine PC:
at 8:07 i started Hardware Inventory Cycle, in the InventoryAgent.log i can see that some Collection Namespace are captured.
after a few minutes there stopped and does nothing round about 5.9 hours or better, after 21436.097 Seconds.
For any hints i am grateful. :)
Inventory: *********************** Start of message processing. ***********************
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Message type is InventoryAction InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Temp directory = C:\WINDOWS\CCM\Inventory\Temp\
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Clearing old collected files. InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Opening store for action {00000000-0000-0000-0000-000000000001} ...
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
CInvState::VerifyInventoryVersionNumber: Mismatch found for '{00000000-0000-0000-0000-000000000001}': 4.2 vs. 0.0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Version number mismatch; will do a Full report.
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Action=Hardware, ReportType=ReSync, MajorVersion=5, MinorVersion=0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Initialization completed in 0.141 seconds
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Collection: Namespace = \\localhost\root\Microsoft\appvirt\client; Query = SELECT __CLASS, __PATH, __RELPATH, CachedLaunchSize, CachedPercentage, CachedSize, LaunchSize, Name, PackageGUID, TotalSize, Version, VersionGUID FROM Package; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:09:56
7836 (0x1E9C)
Failed to get IWbemService Ptr for \\localhost\root\vm\VirtualServer Namespace: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Failed to enumerate instances of VirtualMachine: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AddressWidth, BrandID, CPUHash, CPUKey, DataWidth, DeviceID, Family, Is64Bit, IsHyperthreadCapable, IsMobile, IsTrustedExecutionCapable, IsVitualizationCapable, Manufacturer,
MaxClockSpeed, Name, NormSpeed, NumberOfCores, NumberOfLogicalProcessors, PCache, ProcessorId, ProcessorType, Revision, SocketDesignation, Status, SystemName, Version FROM SMS_Processor; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\CCM\powermanagementagent; Query = SELECT __CLASS, __PATH, __RELPATH, Requester, RequesterInfo, RequesterType, RequestType, Time, UnknownRequester FROM CCM_PwrMgmtLastSuspendError; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, Manufacturer, Name, Status FROM Win32_IDEController; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, BinFileVersion, BinProductVersion, Description, ExecutableName, FilePropertiesHash, FilePropertiesHashEx, FileSize, FileVersion, HasPatchAdded, InstalledFilePath, IsSystemFile,
IsVitalFile, Language, Product, ProductCode, ProductVersion, Publisher FROM SMS_InstalledExecutable; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AdditionalProductCodes, CompanyName, ExplorerFileName, FileDescription, FilePropertiesHash, FileSize, FileVersion, FolderPath, LastUsedTime, LastUserName, msiDisplayName,
msiPublisher, msiVersion, OriginalFileName, ProductCode, ProductLanguage, ProductName, ProductVersion, SoftwarePropertiesHash FROM CCM_RecentlyUsedApps; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, BankLabel, Capacity, Caption, CreationClassName, DataWidth, Description, DeviceLocator, FormFactor, HotSwappable, InstallDate, InterleaveDataDepth, InterleavePosition, Manufacturer,
MemoryType, Model, Name, OtherIdentifyingInfo, PartNumber, PositionInRow, PoweredOn, Removable, Replaceable, SerialNumber, SKU, Speed, Status, Tag, TotalWidth, TypeDetail, Version FROM Win32_PhysicalMemory; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, InstallDate, Manufacturer, Name, PNPDeviceID, ProductName, Status FROM Win32_SoundDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)

InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Looks like something in one or both of those wmi queries. it goes from 8:10:03 to 14:06:43 right around there. 6 hours to do that...
try running those queries from wbemtest manually; and see which one just never finishes.
Standardize. Simplify. Automate.

Mini DisplayPort to DVI and VGA - Does it work or not?

I have just received my new aluminium MacBook Pro, and I think it is awesome. I can even get over the fact that it lacks the full-size DVI connection like the old one has just because it is so nice and shiny. I do need it to work with both DVI and VGA displays though, so I know I will need to buy an adaptor.
My question is: If I buy either the mini DisplayPort to DVI or the dual-DVI adaptor from the apple store, will either one of them work with a DVI-VGA cable? I have heard so far that the single-DVI adaptor does NOT support the VGA pass-through, but would like some confirmation. Even if it is cheaper to buy both the DVI and VGA adaptors I would prefer the dual-DVI adaptor as long as it can do VGA as well, because one adaptor is better than 2.

As far as I know daisy chaining adapters will not work for the MiniDisplay port. http://discussions.apple.com/message.jspa?messageID=8300784#8300784
You will need to buy both adapters, the MiniDisplay to DVI and a MiniDisplay to VGA. I would also suggest you voice your opinion at http://www.apple.com/feedback/macbookpro.html and let them know how you feel about needing to purchase an adapter when one should be included with the computer purchase.

High CPU Problems With Screensavers and Flash Player - FYI

Upgraded my 1.42 Ghz PPC MacMini (1 GB RAM) to Leopard, fresh install and suffered high CPU problems as outlined in various other threads.
Fixed major 100% cpu and 100% FAN issue by removing The Weather Channel Screensaver - so have a look at your console system info and see if a 3rd Party screensaver is causing a problem, or if no 3rd party screensaver, try using a simply screensaver like Forest.
Safari/Netscape/Firefox also were using high CPU when a webpage was using Flash, I removed Flash Player 9 (latest version) and cpu load decreased dramatically.
Go here for uninstall DMG
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
Hope this helps someone else until there are fixes.

Just wanted to clarify that the Flash and Screensaver problem is still ongoing even after the latest QT updates as of Nov 07.
The Flash problems is with Flash images/code that use moving graphics/user input, such as those adverts you see where you push a button to punch Paris Hilton.
I think the overall problem is with the way QT/Core Image/Core Animation is different in Leopard compared to Tiger. As have now often witnessed iTunes just displaying the Cover Flow image area and nothing else (everything else in the application area is white) when going between applications, clicking on the iTunes icon in the dock refreshes the image okay.

CPU temp with Zalman9700 and MSI P965 Platinum ?

Hi.
its funny. My old Asrock DUAL-VSTA showed CPU temp and other temps in programs like HMonitor and Speedfan but this
MSI dosent show anything about CPU in any programs ?
I must say, i was a little confused when i installed the board because there was 2 CPU fan slots, one with 4 pins and one with
3. I have a Zalman CNPS 9700 LED, very nice fan btw. Shoulden this fan be controled by the CPU automaticly ? i do have a
fan regulator in the end of the wire outside the cabinet. I have it on the bag side of the computer case so i can turn it op and
down. But i think i read someware that it could be controled automaticly. Is that right ?
And what about the 3 and 4 pins CPU fan slots on the board. Right now i cant remember in witch of the 3 or 4 slot i installed
the fan in to. But anybody know witch slot is the right one for my CPU fan ?
http://techgage.com/article/zalman_9700led_cpu_cooler/1
http://www.zalman.co.kr/usa/product/view.asp?idx=70&code=017
http://www.zalmanusa.com/
Please if anybody could help here i would be extremely happy.
Mugge

Quote from: MuggeGHQ on 05-March-07, 09:44:13
Listen. Forgot to say.
I'm still a little little bit concerned about 40c-41c idle. but but.
Relax, it's quite alright...
Quote
But what i was trying to say is. I have 3 running SATA drives also and only the stock (Normal) 120 fan that came with the Antec case.
1 fan, the Zalman 9700LED and the PSU fan ofcause. and then OC at 300FSB. Could that be why i'm at 40c idle ?
All the drives + only 1 fan in the case ? i mean. I'm not shure the standard 120 fan that came with the Antec case is good enough.
Any sugestions ?
My case has three 120mm case fan in addition to the 120mm power supply and the Zalman fan, five of them altogether. The Antec P180 case has separate compartment for the hard drives and the power supply, which made a big difference from the temperature's perspective. The box also has four hard drives and I do not OC; I did try, but I didn't see much of a difference and shut it off.
Quote
btw. what is a good stress test apps to test my cpu temp with on max load ?
The Orthos Stress Prime is pretty good and so is Intel's TAT; the link I've posted earlier has more information.
Cr00zng

Macbook air to dual monitors (DVI and dual link DVI)

Hi i have MacBook Air (13-inch, Mid 2013), which only has a mini-displayport input.
i have these two monitors, one monitor has DVI, VGA, HDMI, and the other monitor has only Dual-link DVI-I.
http://www.newegg.com/Product/Product.aspx?Item=N82E16824014373&cm_re=benq_27_in ch-_-24-014-373-_-Product
http://overlordcomputer.com/collections/27-monitors/products/tempest-x270oc-glos sy
is it possible to have dual monitors from this? If so, what cable do i need? thanks.

You'll probably want something like this:
Mini DisplayPort to DVI (2x DVI Output) Converter
http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011409&p_id=8118&se q=1&format=2

CPU 100 % --With Netty and JDK 1.5

I am using netty with JDK 1.5
During the issue have observed intermittent high CPU for above process on the Server
In the collected thread dumps most of the threads
are in runnable state at sun.nio.ch.DevPollArrayWrapper.poll0 method.
java application produces more and more CPU load over time, due to an increasing
number of threads which are spinning around a poll() system call.
Thank in advance

with Solaris 5.10

I need help with repaint() and validate() or something else im not aware of

Im a teacher and im trying to make educational games for my students. This is a simplified code of something i want the applet to do. When the JButton is pressed i want the interior panels to change. In this case JPanel pan3 is my main panel and i want to be able to switch between JPanel pan1 and JPanel pan2 by pressing either [ JButton 1 ] or [ JButton 2 ].
What is happening in my code here when i press one of the buttons is that the interior panel will change the first time but not the second time, plus it will freeze up.
Here is the code if someone can help me.
import java.awt.*;
import javax.swing.*;
public class PanelApplet extends JApplet
     public void init()
          Panelswitch ps=new Panelswitch();
          ps.pan3.add(ps);
          ps.paneBuilder();
          getContentPane().add(ps.pan3);
          resize(500,500);
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.event.*;
public class Panelswitch extends JPanel implements ActionListener
     public static Panelswitch pan1=new Panelswitch();
     public static Panelswitch pan2=new Panelswitch();
     public JPanel pan3;
     public Panelswitch()
          pan3=new JPanel();
          pan3.setLayout(new GridLayout(1,1,5,5));
     public static final String ONE="ONE";
     public static final String TWO="TWO";
     JButton one=new JButton("one");
     JButton two=new JButton("two");
     JLabel oneLabel=new JLabel("One Label");
     JLabel twoLabel=new JLabel("Two Label");
     public void paneBuilder()
          setLayout(new GridLayout(3,1,5,5));
          add(one);
          one.setActionCommand(ONE);
          one.addActionListener(this);
          add(two);
          add(oneLabel);
          two.setActionCommand(TWO);
          two.addActionListener(this);
     public void paneBuilder2()
          setLayout(new GridLayout(1,3,5,5));
          add(twoLabel);
          add(one);
          one.setActionCommand(ONE);
          one.addActionListener(this);
          add(two);
          two.setActionCommand(TWO);
          two.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          // Im trying to make this take down panel 2 and replace it with panel 1
          if(e.getActionCommand().equals(ONE))
               pan2.setVisible(false);
               pan3.removeAll();
               pan3.setLayout(new GridLayout(1,1,5,5));
               pan1.paneBuilder();
               pan1.setVisible(true);
               pan3.add(pan1);
               pan3.validate();
               pan3.repaint();
               System.out.println("one");
          // Im trying to make this take down panel 1 and replace it with panel 2
          if(e.getActionCommand().equals(TWO))
               pan1.setVisible(false);
               pan3.removeAll();
               pan3.setLayout(new GridLayout(1,1,5,5));
               pan2.paneBuilder2();
               pan2.setVisible(true);
               pan3.add(pan2);
               pan3.validate();
               pan3.repaint();
               System.out.println("two");
Thanks for looking

Here's some sample code:
import javax.swing.JPanel;
import javax.swing.JLabel;
import javax.swing.JFrame;
import javax.swing.JButton;
import java.awt.BorderLayout;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.GridLayout;
public class SwapFrame extends JFrame implements ActionListener {
private JPanel firstPanel = new JPanel ();
private JPanel secondPanel = new JPanel ();
private JPanel buttonPanel = new JPanel ();
private JButton addFirstJButton = new JButton("Foo");
private JButton addSecondJButton = new JButton("Bar!");
private Container frameContainer = null;
public SwapFrame() { // With JApplet, put this in your 'init()' method.
    // Frame specific.
    this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    this.setSize(new Dimension (400, 400));
    firstPanel.setLayout(new BorderLayout());
    firstPanel.add(new JButton ("Foo"), BorderLayout.CENTER);
    secondPanel.setLayout(new BorderLayout());
    secondPanel.add(new JButton ("Bar!"), BorderLayout.CENTER);
    buttonPanel.setLayout(new GridLayout(1, 2));
    buttonPanel.add(addFirstJButton);
    buttonPanel.add(addSecondJButton);
    addFirstJButton.addActionListener(this);
    addFirstJButton.setPreferredSize(new Dimension (100, 48));
    addSecondJButton.addActionListener(this);
    addSecondJButton.setPreferredSize(new Dimension (100, 48));
    frameContainer = getContentPane();
    frameContainer.setLayout(new BorderLayout());
    frameContainer.add(firstPanel, BorderLayout.CENTER);
    frameContainer.add(buttonPanel, BorderLayout.SOUTH);
    // Show application.
    this.validate();
    this.setVisible(true);
public void actionPerformed (ActionEvent e) {
    if (e.getSource() instanceof JButton && ((JButton)e.getSource()) == addFirstJButton) {
      frameContainer.remove(secondPanel);
      frameContainer.add(firstPanel, BorderLayout.CENTER);
      this.validate();
      this.repaint();
    } else { // There can only be two buttons...
      frameContainer.remove(firstPanel);
      frameContainer.add(secondPanel, BorderLayout.CENTER);
      this.validate();
      this.repaint();
public static void main (String []args) {
    new SwapFrame();
}Regards,
Devyn

Airport Extreme works fine with ibook and wireless PC on WPA, but not Wii

Hi;
I just got an Airport Extreme last week. Took me a while to get everything figured out, but I got my ibook as well as my wife's ibook and her PC to connect wirelessly, using WPA encryption. We have a TiVo (using the "official" TiVo USB transceiver)and a Nintendo Wii that I can't get to connect though. Both see the network and try to connect, but after a connection attempt they come back with an error message that the network can't be found.
When I change to WEP encryption, the connections work just fine. I really want to stick with WPA, though, as there are a bunch of wireless networks around me and I obviously don't want anyone else to connect to my network. Any thoughts or ideas? Thanks in advance.

At first we could plug the Dell in directly but that was before setting up the AX. Now that the AX works the Dell cannnot connect even wired. (It says that it's connected but it cannot find server when you try to open a webpage). Could this be a problem that the moden cannot go between Mac & windows?
Most modems tend to "remember" the last device connected to it, so it's important to do a complete power-down/power-up when switching devices. It's possible that your modem did this when you attempted to connect the PC directly. My purpose of having you connect the PC directly was to verify that it can access the Internet with a wired connection and that it's wireless setting needs to be troubleshot further.
The power recycle process should be something like the following:
- Power-off the modem & AX; If possible, leave the modem off overnight.
- Power-on the modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.

I had issues with bridge and uninstalled it, now I can not reinstall bridge

I had issues with using Bridge it would be slow and unresponsive. I am using a pc with windows 7. I have the CC subscription for Photoshop. I uninstalled bridge and now can not reinstall it or open CC. I would like to get bridge back it was so much easier to look at all the photos on the camera before choosing to edit them. Thanks and cheers

As Peru Bob mentioned run the Cleaner Tool first.
I'll add signing out of your CC desktop account and signing back in under Preferences.
Hopefully it updates the CC Desktop to where you have the install option for Bridge CC.

Problem with premiere and encore export, Adobe QT32 Server (Not Responding)

I could help.
When exporting to Encore or Premiere, the program block.
In the Activity Monitor shows me these two errors:
Adobe QT32 Server (Not Responding)
PPro Headless (Not Responding)
Technical Specifications:
MAC OS X 10.9.5
Adobe Suite CS6
graphics card: AJA KONA LHi
Can you help me please
Thank You

Have you checked out this post from Adobe? I know it says for After Effects but it definitely applies to Premiere too. We have some AJA cards whose components in /library/QuickTime were causing similar Adobe QT32 server hangups; removing them solved our issue but also broke compatibility with older apps like FCP 7.

CPU whine with DVI and line out/DVI removed whine not in line out?

Similar Messages

Maybe you are looking for