Cq61-240ED laptop does not power on

I have a Compaq CQ61-240ED laptop. For some time the battery was week, only lasted for 5 minutes to run the laptop. Suddenly the laptop would not power up anymore. The AC adapter was broken. After connecting a different adapter. when pressing start button, the battery indicator light flashes 3 times, furthermore no sign of life. No fan, no HD spinning, no screen, nothing. Also, when I connect the power adapter, AC light near the power inlet on the laptop does not burn. When I remove the battery and plug in the adapter, the AC light comes on for 4 seconds and then switches off. The laptop does not start  when I press the power switch the battery indicator flashes 3 times, even when the battery is out. I searched most of the posts but could not find this situation. 
Tried already hard reset, took RAM memory out and put it back. Took CMOS battery out, no result.
Anybody has a clue?

Hi Roberto_57,
Turn on the computer and press F2 or select Diagnostics (F2) to open the Diagnostics menu. Make sure the ram is in the computer at the time of diagnostics and make sure no external device is in the USB ports. If the ram was bad you might have had other issue before it stopped working.
Here is a document on issue when the computer will not start that might help.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph07107&lc=en&product=4107711&tmp_...
Let me know.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • T61p 14.1" Does not power up

    My 14.1" T61p Type: 8891-CTO laptop does not power up.
    After my last successful use, it was sitting idle for 2-3 days with battery & AC adapter connected. When I turned it on nothing came up, no battery charging light or display. I do not have mini/advanced dock.
    So far I've tried the followings:
    1.) Removed Battery & switched on with AC adapter (with & without circuit breaker)
    2.) Removed AC adapter & switched on with Battery
    3.) Removed HDD, RAM, DVD Drive one at a time & again used step 1 & 2 with no luck.
    I bought it new in Dec'07 & still under warranty. I have never used Lenovo support before but from what I've read, their on-phone support sucks.
    a.) Have you faced similar problem or know the solution?
    b.) Does Lenovo have any local repair center in NJ or NC where I can physically carry the machine & get it fixed?
    c.) What will be the fastest/sure-shot way of getting it fixed?
    Thank you!
    Warm regards,
    Hitesh
    Thank you!
    Warm regards,
    Hitesh P
    Solved!
    Go to Solution.

    Ok! It's fixed! I disconnected AC, removed the battery. Then, I took out / reinserted the MEMORY CARDS. As soon as I plugged in the AC, VIOLA!  Indicator lights were on.  I replaced the battery. I powered up the pc -- battery showed only 2% juice.  Moral of the story:  if you leave the pc in hibernate (prolly sleep mode too) for an extended period without plugging in, the battery will lose juice and the pc memory will remain in the previous mode, unable to register when AC is available.  Not ideal, but what I think that's what it is.  OR - someone else suggested that the PC needed a longer time to recharge after wasting all the battery juice -- and that I should've been more patient. But, the PC had been on the AC for 2 hours and no indicator lights were on, which made seemed to indicate that the PC was unable to register that it was attached to the AC power.  I needed to get some work done, so I was ready to try anything. When in doubt, take the mem cards out. And reset them.  
    Sayonara! 

  • Need Help HP DM3 (DM3-1130us) Laptop will not power on. No power at all except for light on a/c jack

    Hello, I need some help.
    I have a HP DM3-1130us Laptop that will not power on at all.
    the only thing that happens when I plug it in is the power jack lights up.
    When the power button is used absolutely nothing happens.
    No power, no fans, no leds, no on/off cycles, no beebs, absolutely nothing
    just the light by the power jack that says the cord is plugged in.
    The laptop has Windows 7, 320gb hdd, 4gb ram.
    I have tried new power adapter and still nothing.
    I have taken the battery out and tried and nothing.
    I've tried the option where you take the battery out and hold the power and nothing.
    I have tried with different hard drive and no hard drive and nothing.
    I have tried reseating the ram and tried new ram modules still nothing.
    So I am kind of stumped on what to do, the laptop will just not turn on.
    Its not under warranty anymore so cant send it off.
    It has not been exposed to any elements(extreme heat or water).
    and its never been dropped or anthing.
    Im kind of wondering maybe the power button board its self is bad?
    If feels fine, its not loose or anything but could it
    have just stopped working? for those who are not familiar with this model.
    the power button is on the side and is a kind of drag and release button.
    Its also on the same board with the Wifi button and 2 Usb ports.
    But Im wondering before I buy a new one if this is what it could be.
    Or could the motherboard its self be bad?
    But even if the motherboard is bad would it still power up
    just not post?
    Also does anyone know of any other way to try to power this laptop up
    without using the slide button. I mean kind of like off a Dv6000 you can power the laptop on by using the Quicklaunch buttons on top but this laptop does not have those.
    If anyone can provide any information I would appreciate it.
    Thank you.

    Hey Tyler,
    Unfortunately it is difficult to troubleshoot this type of issue. The majority of the time when the computer wont power on with the same symptoms you described, the power supply board is faulty. Most of the time if the motherboard is bad it should at least turn on or so some signs of life. Like I said, this is most of the time. Sometimes it could do exactly what your experiencing. I would suspect the power supply board has failed since you are not receiving any sort of lights, sounds, etc.
    You could check the motherboard for swollen capacitors or loose solder joints but sometimes you wont be able to find anything.
    I hope this helps answers your questions,
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Windows 7 does not power off properly with bitlocker enabled

    Hi
    I've got an X200T and installed W7 Enterprise. Things are mostly working fine but i ran into a problem with bitlocker.
    When shutting down, the shutdown process but does not power off my laptop battery: bluetooth light stays on, fan stays on, hardrive stay on.
    the funny thing is if i force the complete shutdown by pressing the ON/OFF button for several seconds, the next startup run smoothly, the system does not detect any wrong shutdown.
    i found a threat relative to this problem elsewhere but nothing on this forum.
    i'm wondering if any of yours are able to run W7 enterprise 32bits + X200T + bitlocker without any problem
    Let me know
    cheers

    Hi,
    I can not tell you about a correlation between your problem and Bitlocker, but what I can tell is that I also have this issue (from time to time - my system is seldom shut down ^^) on my machine, which is a T400, without using Bitlocker. So maybe this is a BIOS defect, as I don't remember this happening before BIOS version 3.
    OSs under which this happened are Vista x64 and Win7 x64.
    Greetz!
    M.T.

  • Hp pavilion dv2500 laptop does not start -Pls help.

    Hi,
    I have HP Pavilion dv2500 laptop which I bought from US(before 3 years) and using in India.
    It has Windows Vista installed on it.
    It has been very frequent that the laptop does not start. Today my laptop started after 10 days or so.
    It does not give any error when I press the start button. There is no change in the screen as well.
    The CPU light blinks. The power light also blinks. But the HARD DISK light does NOT blink.
    If I keep on hitting Escape/F10 key then sometime it may start.
    Before two months my battery was giving some problems and it used to finish very early. So I had to always plugin power chord to use laptop. Then I started getting above problem. However I bought new battery. But then also the laptop start problem exists.
    I called one of the guy and he says that I need to replace the motherboard which could cost around 8000 / 9000 INR(160/180USD)
    Is it hardware problem? I am not sure if it's some other problem.
    Any help is highly appreciated.
    Thanks in advance.
    Best Regards,
    Purvesh

    Try my hard reset method.
    1) Remove the battery and unplug the DC power adapter.
    2) Press and hold the power button for more than fifteen seconds.
    3) Plug in the DC power adapter (leave the battery out for now)
    4) Press the power button
    Please post your positive or negative results here in your thread.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Satellite M50 does not power up

    Hi,
    My Satellite M50 notebook does not power up. The laptop itself has been working fine, but I cannot use it as the battery has drained. I have checked the AC cable and this seems ok. Does the notebook have an internal fuse which I should check? If not, what should I do?
    Thanks.

    Hello
    If I understand you well you cannot use notebook with AC power supply only. Am I right about this?
    The switching between AC or battery power supply, do the boards power supply electronic and there is no some kind of switch that you can check.
    When you connect your notebook to AC power supply is the power LED ON?

  • ZEN 4GB does not power on unless plugged with lapt

    I bought a new creative zen(4GB) a week back.
    I charged it fully for 5 hrs and then tested it by playing a few songs and videos.
    I switched it off and tried to power it on after around 5 hrs but it did not respond.
    When i connected it to the laptop again...it got powered on. After that i removed it from laptop and again played a couple of songs.
    If i power it on after short intervals...it works...but if i power it on after 2-4 hrs it does not power on unless docked to the laptop and this is a recurring feature.
    Please, respond in case someone has faced such a thing or could give some idea.
    Thanks.

    I would use recovery mode, do a format of the player and then upgrade the firmware if you have not already upgraded. The format eliminates any possibly corruption (which can cause shut down and battery performance issues) and it also resets the player settings... the later firmware versions definitely have better battery and charging performance in my experience (current for the ZEN 2/4/8/6/32 is .20.02)
    If it still happens after that then it may be a defect. It does happen - and support can help you get a warranty replacement in that situation. Even though it seems like the forums are always flooded with problems you have to keep in mind the massi've number that don't have any issues and never have any reason to visit here (so in other words keep the chin up, if you do have to get a replacement don't panic).

  • 8800 does not power on but shows the charging symbol! HELP!

    Hello everyone,
    I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
    It arrived two days later and seemed in great physical condition.
    So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
    It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
    So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
    I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
    SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
    BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
    THANKS IN ADVANCE.
    Please help ASAP.
    Mirza

    How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

  • HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • Have a mac mini. Just got a external HD. I want to store my itunes media on my external HD and play back on Windows XP laptop. My laptop does not recognize the HD. Only recognizes the empty partition I created on my mac when I partition the drive. What's

    I have a mac mini-snow leopard. I recently bought an external HD. I want to use part of the HD to back up my mac via Time Machine. The other part I want to use to store my Itunes and other media such as movies with VLC so that I can take the HD and play it back thru my windows XP laptop. The problem is that my laptop does not see the part of the external drive that has my mac info stored on it. Only sees the drive ( as drive E ) with zero data that was created by me when I partitioned it on my mac. I partitioned the drive in two. One partitioned under GUID for mac. The other part under exfat for windows. Any suggestions on why my XP laptop cannot view the mac info on the HD. Thanks.

    DBG413 wrote:
    Any suggestions on why my XP laptop cannot view the mac info on the HD. 
    you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

  • I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly.  I verified my disk and found errors that could not be repaired.  I erased the drive and restored system back to the previous day.

    I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly.  I verified my disk and found errors that could not be repaired (errors were associated with boot drive)  I erased the drive and restored system back to the previous day.  Has anyone else experienced this problem?

    Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located).  BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
    27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

  • Screen/Computer does not Power Up when life the Display from being Closed

    Sometimes (not always), when i come back to my MacBook Pro and open the display after it has been closed for a bit, the screen and computer does not power back up or anything. If you look at the screen there is a very FAINT image on the screen of whatever was open when the screen was closed, but you can't do anything, nothing is responsive, etc. I have to hold down the power button until it turns off, and then right before it turns off the screen will power up for one second and then shuts off. Any ideas?

    I am having a similar issue when transitioning from my external display via the Mini Display to DVI adapter back to the internal LCD. The screen will go black, the machine will not sleep if I close the lid, and none of they key commands appear to work. The only response I can get is the caps lock key will turn off and on. When I restart the machine, I get no details on a Kernel Panic, or anything else, so wondering if it has something to do with the video drivers.

  • TS2481 home laptop does not upload my recurring appointments to the iphone on only one of two computers

    Until recently I have been able to sync my office desktop Outlook 2010 to my home laptop through my iphone. Now my home laptop does not upload my recurring appointments to the iphone even though they appear on the laptop.
    I did play with the 'days back sync' settings but I thought I restored them to before. I'm pretty sure they match the settings on my office desktop.
    Suggestions?

    The computer on which you are not able to go online,Go to the command prompt and perform the following test.Copy and paste all the information in your next post.
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter..If you get 4 replies then type ping 4.2.2.2 and press Enter..If you get 4 replies then type ping yahoo.com and press Enter...
    Now,copy and paste all the information in your next post.

  • A135-S2276 laptop will not power up

    This laptop will not power up.  The green power light will light for a second then shut down.  Reseated the memory, trieed new memory.  The hard drive tested OK.  Removed power adapter and battery, held power switch for 10 seconds.  Tried without battery.  The one time it did power up just kept beeping.  Any suggestions?
    TIA
    Tim

    Phone HP Support for warranty service. If you are in US or Canada:
    http://www8.hp.com/ca/en/contact-hp/phone-assist.html
    If you live in another part of the world, start here>>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • 1.My itunes app list on laptop does not match my devices, how do i fix?

    Two questions...
    1. my itunes app list on my laptop does not match my iphone and ipad2.  It has apps that have been deleted years ago as well as some of my wifes apps and mothers which leads me to...
    2. I have setup my mom's ipad mini and wifes iphone 4 a while back and the accounts have merged almost.  Some of their apps when I set them up show up on my app list, some of my wifes songs transferred to my itunes account, when I go to update my apps it asks me for their passwords and already has their usernames listed, all while logged in under my account.  Also, when i log out and then log in under them, the same songs, movies, etc that are downloaded under MY account show up.  Shouldn't I log in under them and see their songs, etc? Logout, log in under my name and see MY list?

    Do you mean labels on the Bookmarks Toolbar?
    *Roomy Bookmarks Toolbar: https://addons.mozilla.org/firefox/addon/roomy-bookmarks-toolbar/

Maybe you are looking for

  • Abap proxy settting in business system side

    Hi all; I am trying to activate abap proxy environment at the business system(640) with the web blog document https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3022. [original link is broken] [original link is broken] [original link is broken] [o

  • CPU usage with "All my files" finder selected

    Hi everyone, I have another one issue (apart of the battery lasting problem). Every time I start Lion if the "All my files" feature on Finder is selected, the CPU usage is 80-100%. When I change the selection on Finder to whatever folder then it is g

  • Adding additional tab in crm_order sales

    hello experts, kindly let me know how to add an additional tab & some custom fields to that tab in crm_order sales using BADI. plz do the need full.. bye-- Deepa

  • Metric Details 'Actual vs Target' Graph Cut Off

    We have data loaded for about 13 months in SSM.  When I select a metric on the IP scorecard and then view the 'Actual vs Target' graph on the metric details page, part of the graph is cut off. Is there a way to increase the size of the graph so that

  • On which object the "Last data update" is calculated when a query is built

    Can anybody tell me that the information "Last Data Update" (in a  query output) comes from which object ? I want to know the technical details . I know that if a query is built on a Multiprovider, then the "Last Data Update" will show the least load