CR 9.2.3.1699: Subreports first page will displayed 2 times

Hi everbody,
i have a problem with Crystal Reports 9.
I have make a report with 5 subreports in his reports footer section.
The subreports groups data on years. Means they show information for 2008,2009 ... and so on, on a single page.
My problem is that this works perfect if i preview the subreports from itselfs.
If i start the preview from the mainreport the site with the first year 2008 will shown two times and after that all other years in correct order.
I have checked every Options and try different constalations on Keep Together an NEW PAGE Before or After. Nothing helps.
Now i'm sad and looking for inspiration and idea to solve this problem.
May someone has this problem in the past and can help me.
Thx to you
Jan

I have insert a Subreport with insert a report on file. The format options On-demand Supreport, Re-import when loading and suppress Blank-Subreports are disabled. The Main Report Footer are split in serparate sections.
Look at the screenshot here you see the main footer an the subreport footer how makes the problem. And you can see the subreport option of it.
Hopes it will help.
THX
[screenshots|http://www.schebeko.de/images/18.02_cr_formate.png]

Similar Messages

I cannot get into my emails via firefox as onlt the first page will load. I can get in on google chrome. I have wirked through the troubleshooting sheets.

My emails are on Talktalk.net. I have used Firefox for several years with no trouble but at the end of 2013 only the first page would load from firefox. I contacted talktalk and they got me to reset firefox which worked for a short time. When i contacted them a second time they said the fault was on the browser. Based on comments on M support i updated from version 22 to 26 but with no change. I have today worked through the troubleshooting sheets as far as i am able with no success. I can get at the emails from my phone and via google chrome but not from firefox

Try these; 
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"''''' 
and 
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"''''' 
If that does not help,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode start Firefox in Safe Mode]'''''.
Let us know how you do.

I just upgraded to Firefox 4 on my new MacBook Pro and can't open pdf files, or sometimes only the first page will open. Can anyone help?

There are no more details. The files either open to a blank page or the first page only.

Me thinks you have tried to connect to a shortcut folder and not a genuine folder.
Note Mac OS X in Mac OS X 10.4 has 3 popular folder shortcut locations:
The leftmost column of the Finder window.
The horizontal toolbar on the top of the Finder window
The translucent bar which can be anchored on the side or bottom of the screen known as the Dock. These are not true folder locations, but only locations for shortcuts. When you click on a folder for a volume that is not mounted, or is a folder which was deleted it will behave in this fashion. Often if you click on it the right fashion, it will change to a question mark.
In addition if it is an alias to an existing folder that has no contents, it will behave this way from the three shortcut locations.
If you right click instead of the left click a folder, it may think you want to do something to the folder which you can't do. Make sure your mouse button functions properly as a Primary button on Apple menu -> System Preferences -> Keyboard and Mouse.
Also make sure Universal Access is not turned on as it too can cause funny behavior in the mouse click actions, in Apple menu -> System Preferences -> Universal Access.

Adobe form only first page is displayed

hi all,
I have created two pages under the Master page but only the First page is getting displayed. Both are set to visible. Whatelse could be the reason. Thanks.
Regards,
FS

Hi,
Can you please elaborate more on this. Have you added 2 body pages or 2 master pages?
If you have added 2 body pages and if they are empty then they wont get displayed. You will have to insert a subform into the page. Only then you would be able to see the extra two pages.
Thanks,
Radhika

First page to display on Book open

Hi
Hopefully not too dumb a question but what determines the first page that a book opens on?
Mine always seem open on Chapter 1, Section 1 - which I'd like to change
Thanks

I fully expected the book to open where it had last been closed - but for some reason its opening on chapter one.
my question was raised because if thats not the default action, I'd like to override or set my own default.

How to make first page to display when running the project

hi friends,
as i am new this development in webdynpro, i am getting lot of support from the forum. i am thankfull them all.
now i am having many views in my project and i am navigating from one another. if i want to make one particular view as first view to be displayed when i am runnning the project.

hi,
If u have more than one view.To define a view as a start view, you must create an outbound plug for this view.
note:For Create Outbound Plug or Create Inbound Plug. In
the work area of the Navigation Modeler, click once on the view for which you want to create the plug. It is irrelevant whether you start by defining an outbound plug for the start view or creating an inbound plug for the subsequent view.
regards,
Arun

No web pages will display on surface tablet since ...

I upgraded to my new Home Hub 4.0 yesterday. All of my devices, including my Windows Surface RT tablet have connected OK. On the Surface tablet all internet and network applications work OK apart from IE 11 which comes up with message "page can't display" regardless of which page I'm seeking. When I cleck "Fix connection problems" it goes busy for a few seconds, then nothing.
I'm sure it is to do with the Hub as that't the only thing that's changed.
Solved!
Go to Solution.

Thanks for this suggestion. I got the Hub Manager up on the screen and after a while it switched to the welcome screen. I clicked the "Get Started" buttion and progressed through the three steps (declining to download the Desktop Help application which is not compatible with the Surface RT). After that IE11 started working fine. I don't know how following these intitial start up steps fixes IE, because they are certainly not required to get the other internet applications working, but work it did, so thanks again.

Have a gap in detail of first page and not display group footer on each pag

Please help me about Memo field in SubReport in CrystalReportXI. I have a SubReport that need to display pageheader, detail, page footer, and in detail of subreport contains memo field and set the property of this text box to "Can Grow" = Yes .However, CrystalReportX does not support to display pageheader, pagefooter in SubReport. So. I have created a formular FakePageHeader that has code as
"WhileReadingRecords;
true"
and group in this field and checked option repeat group header on each page and right click Section Expert->check print at Bottom of page for Group Footer.
This problem is when I preview Subreport. It display text in group header and a gap in detail of first page and view next page, the subreport display right data of memo field. But the report still not display group footer on each page.
How do I can remove a gap in first page and display group footer on each page?
Thanks

in subreport in format for the memo field uncheck keep object together.
You can not force group footers to repeat on each page.
I have not tried this but you might be able to capture the data you want to show in SR page footer and display in main report page footer, using shared variables.
Ian

Blank First Page in Sub Report

Hi,
My sub report display the first page blank with data starting from the second page. The first page just displays the Report Header. How can I fix this?
Thanks.
Reena

Is it possible that there is a group in the subreport and you have Keep Group Together set in the Group Options?
Fuskie
Who would bet the group data is larger than what fits on a single page and Crystal reacts to that by pushing the whole thing to the second page...

How do I delete just the first page of a document?

A long time ago (2005) I made a document over 200 pages long - and now I need to edit it, specifically to delete the first (empty) page of the documet, so when I add a separate cover, the first page will be on the right, where it should be. I shall also need to edit/change the page numbering and TOC to match. It has been so long since I used Pages that I don't remember how to do this.
I tried selecting the first page in the sidebar vertical list of the pages and hitting the Delete button (or using the menu option) but this seems to want to delete the entire document, not just the selected page.
I know this sounds simple, but I can't figure out how to do it. Pages Help just says to delete the content, but there is no content on the page.

Either you have a lot of Pages breaks which you can delete or you have aded a Pages break which you also can delete. Turn on the invisible characters View > Show Invisibles. You will see blue characters.

AR only prints the first page

Hi people,
Hope you can help me with this problem.
Adobe Reader version : 7.0.9 (although it's 7.0.8 at the about section, but i read in another thread, it's really 7.0.9)
Operating System : Suse 9.2
Kernel version : 2.6.8-24-default (default installation)
Printer : EPSON LQ-2170 impact printer
RAM : 1G
Printer Driver : EPSON -> 24-pin driver
The problem is this :
I tried to print from my own created pdf (the one created from itext java library), printing only 1 page is OK, but when i tried to print selected pages, ex from page 1 - 2 .. only the first page will be printed. I've tried experimenting with print all, and other options in the print dialog, but with the same result, only the first page.
Then i tried printing other pdfs, others than i created, and still resulted the same, only the first page printed.
Frustated with this fact, i tried printing the pdf to another printer, HP laserjet 1010, and it works fine !
The problem only occurs for the EPSON LQ-2170 and only while printing PDF. Printing from other apps is ok.
Could you point direction / ideas about how to solve this problem ?
Thank you for your time ..
Regards,
Albert

Hi,
I just used the 'tail -f /var/log/cups/error_log', reprint the pdf, and found these error messages :
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsWidth
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsHeight
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsBitsPerPixel
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsBytesPerLine
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -mark-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] true
D [10/Jul/2007:10:30:16 +0700] [Job 2624] null
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -device-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] null
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -dict-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Error in .trysetparams!
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsWidth
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsHeight
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsBitsPerPixel
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /undefined
D [10/Jul/2007:10:30:16 +0700] [Job 2624] /cupsBytesPerLine
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -mark-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] true
D [10/Jul/2007:10:30:16 +0700] [Job 2624] null
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -device-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] null
D [10/Jul/2007:10:30:16 +0700] [Job 2624] -dict-
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Error: /rangecheck in .installpagedevice
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Operand stack:
D [10/Jul/2007:10:30:16 +0700] [Job 2624] --dict:70/79(ro)(L)-- --nostringval--
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Execution stack:
D [10/Jul/2007:10:30:16 +0700] [Job 2624] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- --nostringval--
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Dictionary stack:
D [10/Jul/2007:10:30:16 +0700] [Job 2624] --dict:1070/3371(ro)(G)-- --dict:0/20(G)-- --dict:78/200(L)--
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Current allocation mode is local
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Last OS error: 2
D [10/Jul/2007:10:30:16 +0700] [Job 2624] ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1
D [10/Jul/2007:10:30:16 +0700] [Job 2624] 0 %%PageTrailer
D [10/Jul/2007:10:30:16 +0700] [Job 2624] 0 %%Trailer
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Saw Trailer!
D [10/Jul/2007:10:30:16 +0700] [Job 2624] Saw EOF!
D [10/Jul/2007:10:30:16 +0700] UpdateJob: job 2624, file 0 is complete.
D [10/Jul/2007:10:30:16 +0700] CancelJob: id = 2624
D [10/Jul/2007:10:30:16 +0700] StopJob: id = 2624, force = 0
D [10/Jul/2007:10:30:16 +0700] StopJob: printer state is 3
Although i dont know what is wrong and how to fix it, haha ..
Any ideas ?

New page for group headers - the first page is blank

In the Section Expert, if you set the Group Header #1 to "New Page Before", and there is a Page Header section, the first page will show the Page Header with no further data. The rest of the report does the page breaks correct, that is, a new page every time the grouping changes.
How do you stop this blank page at the beginning?
If you assign New Page After in the Group Footer, there is a blank page at the end of the report, which is also annoying. What am I missing?
Robert

If you are using "New Page Before" then use the condition by clicking on X+2 corresponds to it and write
Not OnFirstRecord
For "New Page After" write
Not OnLastRecord
Regards,
Raghavendra.G

Preview only shows first page of TIF files

Hello,
I am having problems with Preview version 3.0.9 (409). When opening a multi-page TIF file, only the first page is displayed. The "page down" button does allow to jump to the following pages. (I am able to view the whole document with other programs). Is this a bug in the program or am I doing something wrong?
Thanks!

HI Fidelio,
I'm not sure if this is a corrupted Preview preference file or not but it can't hurt a thing to try.
Locate this file: com.apple.preview.plist It's here: /Home/Library/Preferences. Open the Preferences folder, locate that file and drag it to the Trash, empty the Trash and reboot. Your Mac will create a new pref file for you.
Carolyn

Report Painter. Form edited only display first page.

Hi All,
I have add on new column on my report painter and now the display is more than one page.
There is warning "Only the first page is displayed in the report" whenever i execute to make modification using T-code : FMEO.
There is ">" ">|" button appear on top when i run using FMEO.
But , when i try to run the form from its T-code. The report only shows the first page column.
The second page is not showing, and there is no button ">" to browse to next page as well.
Just wanna know, is there anyway i could fit 2 pages into 1 page or is there any setting that i could enable so the user could browse to second page on the form?
Thanks.

Hi..,
Onli on First page means ... this node will get executed on the first page irrespective of the page name i.e it considers onli &page& eq 1...
Suppose u have ur fist page i.e MY_FIRST_PAGE.. and in this page the data in the main window may trigger the same page as second page .. i.e if the data in the main window is not sufficient to fit in the first page it triggers the next page i.e MY_FIRST_PAGE as second page ...
so this MY_FIRST_PAGE may extend to the second page also right !! so when u use on page MY_FIRST_PAGE.. this node will get triggered if this page extends to more than one page also..
Hope u understood....
regards,
sai ramesh

Blank first page on DHTML viewer in Crystal 2008

I have seen some threads regarding this issue but no real resolution.
We are using Crystal 2008 running in a Windows 2003 web server and IIS 6. With the base version of Crystal 2008 installed, everything worked fine when rendering reports in the DHTML viewer. As soon as we upgraded to Crystal 2008 SP2, all reports now show a blank first page.
If you page back and forth or do an export, the data on the first page are displayed.
Does anyone have any ideas what caused this and how to fix it other than uninstalling the service packs?

Let's back up a bit. How did you actually deploy the Crystal Reports 2008 .NET Runtime to your web server? Based on your last message it sounds like you use the original CD media? If so this is incorrect.
You mentioned you copied the crv.js from a cab file from the install media. This might account for your problems because you are using an old of out date .js file with newer engine components.
The way I always suggest to deploy to a web server is to use our server redist files. Below are a few of the files you could use. I've listed FP3.3, SP 3 and SP 2. I don't know what patch level you want to be at so the decision is up to you.
Service Pack 3, Fix Pack 3.3 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100016807202010E/cr2008fp33_redist.zip
Service Pack 3 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
Service Pack 2 Server Redist
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip

CR 9.2.3.1699: Subreports first page will displayed 2 times

Similar Messages

Maybe you are looking for