CR blocked in import
Hi experts,
i have a problem with transport of a CR. In transactiom STMS i have launched the import in production system but on my cr i see always the status import running. The import seem blocked.
Where is the problem i not see errors...
Edited by: Citrix73 on Nov 12, 2010 4:12 PM
Not an ABAP question - check with your Basis manager. But, since you have STMS access, you COULD do this yourself. There are several logs available that will identify the issue with hung transports...use the menus available to you.
Similar Messages
-
Hi every one question please?
Just imported photo's to my mac iphoto, great, but made up aslide show viewd by dates but photo's all over te place out of sinc, how can I move them about in order please ?.
New kid on the block.In the slideshow mode there will be a slide tray at the top of the window. There you can move photos to where you want them in the play order:
OT -
Longrunning import blocks other imports
Hello,
we have a longrunning import of a transport with ddic changes concerning quite big files into our QA system.
Currently the wp recreates the indexes of the tables. All other imports are currently blocked.
Is there a tp parameter which let's us circumvent this behaviour in the future or can we do something else to get the other imports running.
Best regards,
Juergen ScheckelhoffHello,
unfortunately, there you cannot do anything ... these kind of transports should be imported during offline time ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
RV110W - can a list of IP's to block be imported?
I want to block certain countries at my WAN interface in a RV110W. Is there a way to import the list rather than type in each entry?
It sounds like you really might want to consider seeking legal advice for this matter.
-
Black block when importing LiveType file into FCE
Help.
I've gone through all of the training videos and was really excited to use LiveType on my new MacBook Pro. However, FCE imports my files as black screens (none of my LiveType data shows up). Anyone know what I am doing wrong?Thanks. It worked!
-
Key Mapping activates Versus Import Manager
Hello,
I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map.
Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping property,
I noticed that for each supplier ID in the Supplier table, a lot of remote keys were created. Previously I only had one remote key for each supplier and now I have a list of other supplier's ID. ( Existent or nonexistent supplier IDs). This becomes an issue for my import, because when I try to import a file where the supplier id does not exist in the MDM ( this scenario used to block my import and this is what a expect, as supplier is a key in my mapping), the system automatically maps that nonexistent supplier to other supplier.
Can you help me to understand if this is caused for the key mapping property ? Any Idea ?
Thank you very much
Luciana.Hello Stanley,
The remote keys are form the same remote system.
My story is : When I am importing a file , suppose my file has an invalid supplier ID. ( this means this supplier is not in the lookup table Suppliers)
1)The import manager will give me a message such as : Map Supplier ID Values. This behavior was expected.
2)I decided to test the automap. The invalid supplier was not mapped to a different value. I am ok with that.
3)If the user ( dont ask me the reason ;-)) decides to map that invalid supplier ID to a different one, he/she is allowed to do so. I remember when the key mapping was not activated this option did not exist. The map and automap button was deactivated.
What I am trying to make sure is : a remote key will be created for invalid suppliers ONLY if I choose to map it with a different supplier ID.
Do you have any comments about it ?
Thank you very much
Luciana. -
Hi, I have several of my cd imports to itunes, unable to listen to for lots of background noise. Applecare told me the optical drive was at fault; a new one replaced old one (less than a year old) still same problem after re-imprting relevant cds. Also ticked error box in itunes preferences.
Would the cds in question have some sort of 'block' on import. All the releevnt cds play on my various cd gadgets.
Any assistance would be much appreciated.
MichaelDoes the noise occur with all imports or just some.
Do the CDs play noise free in the optical drive or just as imported.
Have you tried unchecking error correction. I virtually never use that setting.
AAC 128 - Unless disk space is at an absolute minimum, I would import at 256 AAC and a sample rate of 44.100 kHz -
Getting error message "Only a type can be imported-" when trying to execute jsp page
I get the error: "Only a type can be imported. com.adobe.cq.TestServiceImpl resolves to a package in adobe day cq5
I have created one bundle and installed in felix console. The status of the bundle is also Active. And also it is available in both service and component console.
Here is my TestServiceImpl class in com.adobe.cq bundle
package com.adobe.cq;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.BundleContext;
import org.osgi.service.component.ComponentContext;
import javax.jcr.RepositoryException;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Properties;
//src.component
//declares the class component. This will provide a wrapped ManagedService component in the OSGI container.
//src.service interface="SampleService"
//declares the service we are offering. Actually, the interface attribute is superflous, as by default, all implemented Interfaces are used.
@scr.component
@scr.service interface="testService"
@Component(immediate = true, metatype = true)
@Service
@Properties( {
@Property(name = "service.description", value = "abcd"),
@Property(name = "label", value = "myLabel") })
public class TestServiceImpl implements TestService {
public String sayHello() {
return "Hello World!";
Here is my jsp code
<%@include file="/libs/foundation/global.jsp"%><%
%><%@include file="/apps/mine/includes/functions.jsp"%><%
%><%@ page import="com.adobe.cq.TestServiceImpl,
org.apache.sling.api.SlingHttpServletRequest,
java.util.List"%><%
%><%
SlingHttpServletRequest r = (SlingHttpServletRequest)request;
TestServiceImpl testService = sling.getService(TestServiceImpl.class);
out.println("testService:::"+testService);
%>
<div id="te-nav" style="display:block !important;">
</div>
Is it because of am using annotation in TestServiceImpl class?
Could you please tell me how to fix it?
Regards,
AndersonHi Pawan,
Thanks for your information. It was problem with my pom.xml It started to work after changing my POM.xml
I am not able to get sling service for TestServiceImpl. But I am only able to create TestService which is my interface. I need to get reference for TestServiceImpl class not for TestService interface. Please help me to make it.
i have created TestServiceImpl and TestService class for testing whether my bubdle is crating all the folder structure or not.
But my requirement is like assume class A has some methods like getMenuLink, setMenuLink.. And In class B i am calling some methods in class A and doing some manipulation in createLink method.
Here class B does not have any interface. Not implementing any interface. But I need to get class B refererence via sling.getService.
I know that if we are using maven SCR plugin..we need to have @component, @service. And All java classes are not services. Will it work if I add activate, deactivate method in class B?
Could you please tell me how to proceed next?
Thanks,
Anderson -
Tabbed panels repeat region in cms displays 2nd item as a block of content
Hi everyone, hope someone can help:
I have a test page live
http://aegmotorhomes.co.uk/usedtest1.php
Problem is this-
I have added a repeat region on my dreamweaver template
I use Perch CMS as my management for staff to add new items for sale on this page
I have built a tabbed panels to list the item
On my CMS it allows me to press "add another" which then adds the tabbed panels again as a new item and the staff input the details
My problem is the first item works perfect and all tabbs work fine, each item after that doesn't have tabbs and shows all content as one whole block
I think it is to do with the ID and applies the java file only to item one, thats my guess.
I have attached code below for my tabbed panels template, .js file and .css file - can anyone shed any light on this issue"
TEMPLATE
<style type="text/css">
#container1 {
width: 700px;
background-color: #E6E6E6;
border: .1em solid #999;
padding-top: 5px;
padding-right: 5px;
padding-left: 5px;
height: auto;
margin-bottom: 30px;
#item_description {
font-family: Arial, Helvetica, sans-serif;
font-size: 1.3em;
color: #333;
background-color: #FFF;
height: 30px;
border-bottom-width: .1em;
border-bottom-style: dotted;
border-bottom-color: #333;
font-weight: bold;
margin-bottom: 10px;
#price {
margin-top: 5px;
float: right;
width: 150px;
background-color: #EAEAEA;
border: 0.1em solid #CCC;
.BOLDTEXT {
font-weight: bold;
text-align: center;
color: #FFF;
.BOLDTEXT_PRICE {
color: #333;
#engine_spec {
float: left;
width: 190px;
font-family: Arial, Helvetica, sans-serif;
font-size: .75em;
border-top-style: none;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;
#top_price {
font-family: Arial, Helvetica, sans-serif;
font-size: 1.2em;
color: #099;
float: right;
width: 150px;
font-weight: bold;
text-align: right;
#top_price {
font-family: Arial, Helvetica, sans-serif;
font-size: 1.4em;
color: #099;
#overview_picture {
height: 150px;
width: 200px;
background-color: #CCC;
float: left;
margin-right: 10px;
margin-top: 5px;
.BOLDTEXT_blackprice {
font-family: Arial, Helvetica, sans-serif;
font-size: 1.4em;
color: #099;
#smallprint {
font-family: Arial, Helvetica, sans-serif;
font-size: .5em;
color: #666;
margin-top: 2px;
table tr td {
font-size: 0.75em;
font-family: Arial, Helvetica, sans-serif;
.specwhite {
color: #FFF;
font-family: Arial, Helvetica, sans-serif;
font-size: 1em;
font-weight: bold;
#reserve {
font-family: Arial, Helvetica, sans-serif;
font-size: 1.2em;
font-weight: bold;
color: #FFF;
background-color: #099;
width: 140px;
float: right;
margin-top: 10px;
padding: 5px;
text-align: center;
border: .1em solid #999;
</style>
<script src="../../../../SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<link href="../../../../SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
<div id="container1">
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
<li class="TabbedPanelsTab" tabindex="0">Overview</li>
<li class="TabbedPanelsTab" tabindex="0">Description</li>
<li class="TabbedPanelsTab" tabindex="0">Images</li>
<li class="TabbedPanelsTab" tabindex="0">Specification</li>
</ul>
<div class="TabbedPanelsContentGroup">
<div class="TabbedPanelsContent">
<div id="item_description"><perch:content id="Title1" label="Title" type="text" />
<div id="top_price">£<perch:content id="Title2" label="Top Price" type="text" /></div>
</div>
<div id="overview_picture"><img src="<perch:content id="photo" label="Photo" type="image" />" class="photo" /></div>
<div class="engine_spec" id="engine_spec">
<table width="100%" border="0" cellpadding="5" cellspacing="7">
<tr>
<td width="35%" bgcolor="#EAEAEA">Year of Make</td>
<td width="65%" bgcolor="#999999"><strong class="spec_white"><span class="engine_spec"><span class="specwhite"><perch:content id="Title3" label="Year" type="text" /></span></span></strong></td>
</tr>
<tr>
<td bgcolor="#EAEAEA">Current Miles</td>
<td bgcolor="#999999" class="spec_white"><span class="specwhite"><perch:content id="Title4" label="Mileage" type="text" /></span></td>
</tr>
<tr>
<td bgcolor="#EAEAEA">Engine Size</td>
<td bgcolor="#999999" class="spec_white"><span class="specwhite"><perch:content id="Title5" label="Engine" type="text" /></span></td>
</tr>
<tr>
<td bgcolor="#EAEAEA">Body Colour</td>
<td bgcolor="#999999" class="spec_white"><span class="specwhite"><perch:content id="Title6" label="Colour" type="text" /></span></td>
</tr>
<tr>
<td bgcolor="#EAEAEA">Transmission</td>
<td bgcolor="#999999" class="spec_white"><span class="specwhite"><perch:content id="Title7" label="Transmission" type="text" /></span></td>
</tr>
</table>
</div>
<div id="price">
<table width="150" border="0" cellspacing="9">
<tr>
<td width="50" height="25" bgcolor="#999999" class="BOLDTEXT">WAS</td>
<td width="81" class="BOLDTEXT"><span class="BOLDTEXT_blackprice">£<perch:content id="Title8" label="Old Price" type="text" /></span></td>
</tr>
<tr>
<td height="25" bgcolor="#999999" class="BOLDTEXT">NOW</td>
<td class="BOLDTEXT"><span class="BOLDTEXT_blackprice">£<perch:content id="Title9" label="New Price" type="text" /></span></td>
</tr>
<tr>
<td height="25" bgcolor="#999999" class="BOLDTEXT">SAVE</td>
<td class="BOLDTEXT"><span class="BOLDTEXT_blackprice">£<perch:content id="Title9a" label="Save" type="text" /></span></td>
</tr>
</table>
</div>
<div id="reserve">Reserve Motorhome</div>
</div>
<div class="TabbedPanelsContent"><perch:content id="Text" label="Description" type="textarea" editor="ckeditor" html="true" /></div>
<div class="TabbedPanelsContent"><table width="650" cellspacing="5">
<tr>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
</tr>
<tr>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
</tr>
<tr>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
</tr>
<tr>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
</tr>
<tr>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
<td width="106" height="80" bgcolor="#CCCCCC"> </td>
</tr>
</table></div>
<div class="TabbedPanelsContent"><perch:content id="Text1" label="Specification" type="textarea" editor="ckeditor" html="true" /></div>
</div>
</div>
</div>
<script type="text/javascript">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
</script>
.JS file
(function() { // BeginSpryComponent
if (typeof Spry == "undefined") window.Spry = {}; if (!Spry.Widget) Spry.Widget = {};
Spry.Widget.TabbedPanels = function(element, opts)
this.element = this.getElement(element);
this.defaultTab = 0; // Show the first panel by default.
this.tabSelectedClass = "TabbedPanelsTabSelected";
this.tabHoverClass = "TabbedPanelsTabHover";
this.tabFocusedClass = "TabbedPanelsTabFocused";
this.panelVisibleClass = "TabbedPanelsContentVisible";
this.focusElement = null;
this.hasFocus = false;
this.currentTabIndex = 0;
this.enableKeyboardNavigation = true;
this.nextPanelKeyCode = Spry.Widget.TabbedPanels.KEY_RIGHT;
this.previousPanelKeyCode = Spry.Widget.TabbedPanels.KEY_LEFT;
Spry.Widget.TabbedPanels.setOptions(this, opts);
// If the defaultTab is expressed as a number/index, convert
// it to an element.
if (typeof (this.defaultTab) == "number")
if (this.defaultTab < 0)
this.defaultTab = 0;
else
var count = this.getTabbedPanelCount();
if (this.defaultTab >= count)
this.defaultTab = (count > 1) ? (count - 1) : 0;
this.defaultTab = this.getTabs()[this.defaultTab];
// The defaultTab property is supposed to be the tab element for the tab content
// to show by default. The caller is allowed to pass in the element itself or the
// element's id, so we need to convert the current value to an element if necessary.
if (this.defaultTab)
this.defaultTab = this.getElement(this.defaultTab);
this.attachBehaviors();
Spry.Widget.TabbedPanels.prototype.getElement = function(ele)
if (ele && typeof ele == "string")
return document.getElementById(ele);
return ele;
Spry.Widget.TabbedPanels.prototype.getElementChildren = function(element)
var children = [];
var child = element.firstChild;
while (child)
if (child.nodeType == 1 /* Node.ELEMENT_NODE */)
children.push(child);
child = child.nextSibling;
return children;
Spry.Widget.TabbedPanels.prototype.addClassName = function(ele, className)
if (!ele || !className || (ele.className && ele.className.search(new RegExp("\\b" + className + "\\b")) != -1))
return;
ele.className += (ele.className ? " " : "") + className;
Spry.Widget.TabbedPanels.prototype.removeClassName = function(ele, className)
if (!ele || !className || (ele.className && ele.className.search(new RegExp("\\b" + className + "\\b")) == -1))
return;
ele.className = ele.className.replace(new RegExp("\\s*\\b" + className + "\\b", "g"), "");
Spry.Widget.TabbedPanels.setOptions = function(obj, optionsObj, ignoreUndefinedProps)
if (!optionsObj)
return;
for (var optionName in optionsObj)
if (ignoreUndefinedProps && optionsObj[optionName] == undefined)
continue;
obj[optionName] = optionsObj[optionName];
Spry.Widget.TabbedPanels.prototype.getTabGroup = function()
if (this.element)
var children = this.getElementChildren(this.element);
if (children.length)
return children[0];
return null;
Spry.Widget.TabbedPanels.prototype.getTabs = function()
var tabs = [];
var tg = this.getTabGroup();
if (tg)
tabs = this.getElementChildren(tg);
return tabs;
Spry.Widget.TabbedPanels.prototype.getContentPanelGroup = function()
if (this.element)
var children = this.getElementChildren(this.element);
if (children.length > 1)
return children[1];
return null;
Spry.Widget.TabbedPanels.prototype.getContentPanels = function()
var panels = [];
var pg = this.getContentPanelGroup();
if (pg)
panels = this.getElementChildren(pg);
return panels;
Spry.Widget.TabbedPanels.prototype.getIndex = function(ele, arr)
ele = this.getElement(ele);
if (ele && arr && arr.length)
for (var i = 0; i < arr.length; i++)
if (ele == arr[i])
return i;
return -1;
Spry.Widget.TabbedPanels.prototype.getTabIndex = function(ele)
var i = this.getIndex(ele, this.getTabs());
if (i < 0)
i = this.getIndex(ele, this.getContentPanels());
return i;
Spry.Widget.TabbedPanels.prototype.getCurrentTabIndex = function()
return this.currentTabIndex;
Spry.Widget.TabbedPanels.prototype.getTabbedPanelCount = function(ele)
return Math.min(this.getTabs().length, this.getContentPanels().length);
Spry.Widget.TabbedPanels.addEventListener = function(element, eventType, handler, capture)
try
if (element.addEventListener)
element.addEventListener(eventType, handler, capture);
else if (element.attachEvent)
element.attachEvent("on" + eventType, handler);
catch (e) {}
Spry.Widget.TabbedPanels.prototype.cancelEvent = function(e)
if (e.preventDefault) e.preventDefault();
else e.returnValue = false;
if (e.stopPropagation) e.stopPropagation();
else e.cancelBubble = true;
return false;
Spry.Widget.TabbedPanels.prototype.onTabClick = function(e, tab)
this.showPanel(tab);
return this.cancelEvent(e);
Spry.Widget.TabbedPanels.prototype.onTabMouseOver = function(e, tab)
this.addClassName(tab, this.tabHoverClass);
return false;
Spry.Widget.TabbedPanels.prototype.onTabMouseOut = function(e, tab)
this.removeClassName(tab, this.tabHoverClass);
return false;
Spry.Widget.TabbedPanels.prototype.onTabFocus = function(e, tab)
this.hasFocus = true;
this.addClassName(tab, this.tabFocusedClass);
return false;
Spry.Widget.TabbedPanels.prototype.onTabBlur = function(e, tab)
this.hasFocus = false;
this.removeClassName(tab, this.tabFocusedClass);
return false;
Spry.Widget.TabbedPanels.KEY_UP = 38;
Spry.Widget.TabbedPanels.KEY_DOWN = 40;
Spry.Widget.TabbedPanels.KEY_LEFT = 37;
Spry.Widget.TabbedPanels.KEY_RIGHT = 39;
Spry.Widget.TabbedPanels.prototype.onTabKeyDown = function(e, tab)
var key = e.keyCode;
if (!this.hasFocus || (key != this.previousPanelKeyCode && key != this.nextPanelKeyCode))
return true;
var tabs = this.getTabs();
for (var i =0; i < tabs.length; i++)
if (tabs[i] == tab)
var el = false;
if (key == this.previousPanelKeyCode && i > 0)
el = tabs[i-1];
else if (key == this.nextPanelKeyCode && i < tabs.length-1)
el = tabs[i+1];
if (el)
this.showPanel(el);
el.focus();
break;
return this.cancelEvent(e);
Spry.Widget.TabbedPanels.prototype.preorderTraversal = function(root, func)
var stopTraversal = false;
if (root)
stopTraversal = func(root);
if (root.hasChildNodes())
var child = root.firstChild;
while (!stopTraversal && child)
stopTraversal = this.preorderTraversal(child, func);
try { child = child.nextSibling; } catch (e) { child = null; }
return stopTraversal;
Spry.Widget.TabbedPanels.prototype.addPanelEventListeners = function(tab, panel)
var self = this;
Spry.Widget.TabbedPanels.addEventListener(tab, "click", function(e) { return self.onTabClick(e, tab); }, false);
Spry.Widget.TabbedPanels.addEventListener(tab, "mouseover", function(e) { return self.onTabMouseOver(e, tab); }, false);
Spry.Widget.TabbedPanels.addEventListener(tab, "mouseout", function(e) { return self.onTabMouseOut(e, tab); }, false);
if (this.enableKeyboardNavigation)
// XXX: IE doesn't allow the setting of tabindex dynamically. This means we can't
// rely on adding the tabindex attribute if it is missing to enable keyboard navigation
// by default.
// Find the first element within the tab container that has a tabindex or the first
// anchor tag.
var tabIndexEle = null;
var tabAnchorEle = null;
this.preorderTraversal(tab, function(node) {
if (node.nodeType == 1 /* NODE.ELEMENT_NODE */)
var tabIndexAttr = tab.attributes.getNamedItem("tabindex");
if (tabIndexAttr)
tabIndexEle = node;
return true;
if (!tabAnchorEle && node.nodeName.toLowerCase() == "a")
tabAnchorEle = node;
return false;
if (tabIndexEle)
this.focusElement = tabIndexEle;
else if (tabAnchorEle)
this.focusElement = tabAnchorEle;
if (this.focusElement)
Spry.Widget.TabbedPanels.addEventListener(this.focusElement, "focus", function(e) { return self.onTabFocus(e, tab); }, false);
Spry.Widget.TabbedPanels.addEventListener(this.focusElement, "blur", function(e) { return self.onTabBlur(e, tab); }, false);
Spry.Widget.TabbedPanels.addEventListener(this.focusElement, "keydown", function(e) { return self.onTabKeyDown(e, tab); }, false);
Spry.Widget.TabbedPanels.prototype.showPanel = function(elementOrIndex)
var tpIndex = -1;
if (typeof elementOrIndex == "number")
tpIndex = elementOrIndex;
else // Must be the element for the tab or content panel.
tpIndex = this.getTabIndex(elementOrIndex);
if (!tpIndex < 0 || tpIndex >= this.getTabbedPanelCount())
return;
var tabs = this.getTabs();
var panels = this.getContentPanels();
var numTabbedPanels = Math.max(tabs.length, panels.length);
for (var i = 0; i < numTabbedPanels; i++)
if (i != tpIndex)
if (tabs[i])
this.removeClassName(tabs[i], this.tabSelectedClass);
if (panels[i])
this.removeClassName(panels[i], this.panelVisibleClass);
panels[i].style.display = "none";
this.addClassName(tabs[tpIndex], this.tabSelectedClass);
this.addClassName(panels[tpIndex], this.panelVisibleClass);
panels[tpIndex].style.display = "block";
this.currentTabIndex = tpIndex;
Spry.Widget.TabbedPanels.prototype.attachBehaviors = function(element)
var tabs = this.getTabs();
var panels = this.getContentPanels();
var panelCount = this.getTabbedPanelCount();
for (var i = 0; i < panelCount; i++)
this.addPanelEventListeners(tabs[i], panels[i]);
this.showPanel(this.defaultTab);
})(); // EndSpryComponent
>CSS file
@charset "UTF-8";
/* SpryTabbedPanels.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
/* Horizontal Tabbed Panels
* The default style for a TabbedPanels widget places all tab buttons
* (left aligned) above the content panel.
/* This is the selector for the main TabbedPanels container. For our
* default style, this container does not contribute anything visually,
* but it is floated left to make sure that any floating or clearing done
* with any of its child elements are contained completely within the
* TabbedPanels container, to minimize any impact or undesireable
* interaction with other floated elements on the page that may be used
* for layout.
* If you want to constrain the width of the TabbedPanels widget, set a
* width on the TabbedPanels container. By default, the TabbedPanels widget
* expands horizontally to fill up available space.
* The name of the class ("TabbedPanels") used in this selector is not
* necessary to make the widget function. You can use any class name you
* want to style the TabbedPanels container.
.TabbedPanels {
overflow: hidden;
margin: 0px;
padding: 0px;
clear: none;
width: 100%; /* IE Hack to force proper layout when preceded by a paragraph. (hasLayout Bug)*/
/* This is the selector for the TabGroup. The TabGroup container houses
* all of the tab buttons for each tabbed panel in the widget. This container
* does not contribute anything visually to the look of the widget for our
* default style.
* The name of the class ("TabbedPanelsTabGroup") used in this selector is not
* necessary to make the widget function. You can use any class name you
* want to style the TabGroup container.
.TabbedPanelsTabGroup {
margin: 0px;
padding: 0px;
/* This is the selector for the TabbedPanelsTab. This container houses
* the title for the panel. This is also the tab "button" that the user clicks
* on to activate the corresponding content panel so that it appears on top
* of the other tabbed panels contained in the widget.
* For our default style, each tab is positioned relatively 1 pixel down from
* where it wold normally render. This allows each tab to overlap the content
* panel that renders below it. Each tab is rendered with a 1 pixel bottom
* border that has a color that matches the top border of the current content
* panel. This gives the appearance that the tab is being drawn behind the
* content panel.
* The name of the class ("TabbedPanelsTab") used in this selector is not
* necessary to make the widget function. You can use any class name you want
* to style this tab container.
.TabbedPanelsTab {
position: relative;
top: 1px;
float: left;
background-color: #DDD;
list-style: none;
-moz-user-select: none;
-khtml-user-select: none;
cursor: pointer;
font-family: sans-serif;
font-size: small;
font-weight: bold;
margin-top: 0px;
margin-right: 1px;
margin-bottom: 0px;
margin-left: 0px;
padding-top: 4px;
padding-right: 10px;
padding-left: 10px;
padding-bottom: 4px;
/* This selector is an example of how to change the appearnce of a tab button
* container as the mouse enters it. The class "TabbedPanelsTabHover" is
* programatically added and removed from the tab element as the mouse enters
* and exits the container.
.TabbedPanelsTabHover {
background-color: #CCC;
/* This selector is an example of how to change the appearance of a tab button
* container after the user has clicked on it to activate a content panel.
* The class "TabbedPanelsTabSelected" is programatically added and removed
* from the tab element as the user clicks on the tab button containers in
* the widget.
* As mentioned above, for our default style, tab buttons are positioned
* 1 pixel down from where it would normally render. When the tab button is
* selected, we change its bottom border to match the background color of the
* content panel so that it looks like the tab is part of the content panel.
.TabbedPanelsTabSelected {
background-color: #FFF;
color: #333;
border-top-color: fff;
border-right-color: fff;
border-bottom-color: fff;
border-left-color: fff;
border-color: fff;
outline-color: fff;
/* This selector is an example of how to make a link inside of a tab button
* look like normal text. Users may want to use links inside of a tab button
* so that when it gets focus, the text *inside* the tab button gets a focus
* ring around it, instead of the focus ring around the entire tab.
.TabbedPanelsTab a {
color: black;
text-decoration: none;
/* This is the selector for the ContentGroup. The ContentGroup container houses
* all of the content panels for each tabbed panel in the widget. For our
* default style, this container provides the background color and borders that
* surround the content.
* The name of the class ("TabbedPanelsContentGroup") used in this selector is
* not necessary to make the widget function. You can use any class name you
* want to style the ContentGroup container.
.TabbedPanelsContentGroup {
clear: both;
background-color: #F9F9F1;
height: auto;
margin-bottom: 3px;
border: .1px solid #999;
/* This is the selector for the Content panel. The Content panel holds the
* content for a single tabbed panel. For our default style, this container
* provides some padding, so that the content is not pushed up against the
* widget borders.
* The name of the class ("TabbedPanelsContent") used in this selector is
* not necessary to make the widget function. You can use any class name you
* want to style the Content container.
.TabbedPanelsContent {
overflow: hidden;
padding: 4px;
/* This selector is an example of how to change the appearnce of the currently
* active container panel. The class "TabbedPanelsContentVisible" is
* programatically added and removed from the content element as the panel
* is activated/deactivated.
.TabbedPanelsContentVisible {
background-color: #FFF;
font-family: Arial, Helvetica, sans-serif;
font-size: 0.75em;
color: #333;
padding: 20px;
clear: both;
margin-bottom: 5px;
height: auto;
/* Vertical Tabbed Panels
* The following rules override some of the default rules above so that the
* TabbedPanels widget renders with its tab buttons along the left side of
* the currently active content panel.
* With the rules defined below, the only change that will have to be made
* to switch a horizontal tabbed panels widget to a vertical tabbed panels
* widget, is to use the "VTabbedPanels" class on the top-level widget
* container element, instead of "TabbedPanels".
.VTabbedPanels {
overflow: hidden;
zoom: 1;
/* This selector floats the TabGroup so that the tab buttons it contains
* render to the left of the active content panel. A border is drawn around
* the group container to make it look like a list container.
.VTabbedPanels .TabbedPanelsTabGroup {
float: left;
width: 10em;
height: 20em;
background-color: #EEE;
position: relative;
border-top: solid 1px #999;
border-right: solid 1px #999;
border-left: solid 1px #CCC;
border-bottom: solid 1px #CCC;
/* This selector disables the float property that is placed on each tab button
* by the default TabbedPanelsTab selector rule above. It also draws a bottom
* border for the tab. The tab button will get its left and right border from
* the TabGroup, and its top border from the TabGroup or tab button above it.
.VTabbedPanels .TabbedPanelsTab {
float: none;
margin: 0px;
border-top: none;
border-left: none;
border-right: none;
/* This selector disables the float property that is placed on each tab button
* by the default TabbedPanelsTab selector rule above. It also draws a bottom
* border for the tab. The tab button will get its left and right border from
* the TabGroup, and its top border from the TabGroup or tab button above it.
.VTabbedPanels .TabbedPanelsTabSelected {
background-color: #EEE;
border-bottom: solid 1px #999;
/* This selector floats the content panels for the widget so that they
* render to the right of the tabbed buttons.
.VTabbedPanels .TabbedPanelsContentGroup {
clear: none;
float: left;
padding: 0px;
width: 30em;
height: 20em;
/* Styles for Printing */
@media print {
.TabbedPanels {
overflow: visible !important;
.TabbedPanelsContentGroup {
display: block !important;
overflow: visible !important;
height: auto !important;
.TabbedPanelsContent {
overflow: visible !important;
display: block !important;
clear:both !important;
.TabbedPanelsTab {
overflow: visible !important;
display: block !important;
clear:none !important;
height: 100%;
#TabbedPanels1 {
height: auto;
padding-top: 5px;
background-color: #EAEAEA;
width: 700px;
I did read this but don't know where to start: http://www.webdevforums.com/showthread.php?27428-Dreamweaver-spry-collapsible-panel-amp-re peating-regions
Can anybody HELP PLEASE PLEASEI think I counted three tabbed panels in the markup, each with an ID of TabbedPanels1
You have only one constructor that makes one instance of the tabeed panels with an ID of TabbedPanels1
There are a couple of things that create the problem.
There can only be one ID with the same name in a document, thus the ID's of the TabbedPanels will need to change from TabbedPanels1 for the second and third instances to TabbedPanels2 and TabbedPanels3 (or similar) respectively.
There needs to be a constructor for each tabbed panels like
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
var TabbedPanels2 = new Spry.Widget.TabbedPanels("TabbedPanels2");
var TabbedPanels3 = new Spry.Widget.TabbedPanels("TabbedPanels3");
Gramps -
Export APEX application will not import to another APEX instance
Oracle XE 11gR2
APEX 4.1.1
Windows 7
===============
Get the following error when trying to import (via SQL*Plus) an APEX application:
ORA-02291: integrity constraint (APEX_040100.WWV_FLOWS_FK) violated - parent key not found
ORA-06512: at "APEX_040100.WWW_FLOW_API", line 679
ORA-06512: at line 3
Used the following PL/SQL block to import APEX application:
declare
-- the name of the workspace in which to import -- actually your parsing schema
t_workspace varchar2(30):= 'APEXAPP';
-- an application number of an existing application in the workspace.
t_existing_app number := 103;
-- the "new" application number, an existing number will be dropped first.
t_new_app number := 103;
-- security group id, you don't have to set this variable
t_secgrp_id number;
begin
-- get the Security Group ID
select workspace_id
into t_secgrp_id
from apex_applications
where application_id = t_existing_app;
wwv_flow_api.set_security_group_id(p_security_group_id => t_secgrp_id);
apex_application_install.set_application_id(t_new_app);
apex_application_install.generate_offset;
apex_application_install.set_schema(t_workspace);
apex_application_install.set_application_alias('APEXAPP' );
end;
@C:\DEPLOY\APEX_APP.sql;
commit;
=====================
I recently did an upgrade from APEX 4.0.2 to 4.1.1 but there were no apps in this particular APEX instance. Just needed an upgrade because the APEX that
comes with Oracle XE database is 4.0.2 and we are developing with APEX 4.1.1
Please advise. This block has been used before to deploy APEX exports.I'm front of the same issue.
Did you find a solution ?
Thanks for help.
Fanny -
Stop Import if condition is not set
Hi all,
I would like to check if content of the file I want to import is similar to POV selection.
To do thaht I created a BefImport script that read the first line of my file and check Period and Category POV with date and category values on my file.
It work well, an error is displayed but the import still continue and finish successfully.
What I want is to block that import, so user must change POV to correctly import his file.
You can find below the script I use. Could anyone tell me what I have to add to block import ?
Dim fso, fs, s, objFilePath
Dim InboxPath
Dim strCodeMois, strLibMois, strAnnee, strLibPeriode
Dim lngProcessType
Dim blnProcessState
Dim strProcessMsg
'************************ Initialisation **************************
'Initialisation des états de flux FDM
lngProcessType = 1 '(See enmProcessType)
blnProcessState = 0 'False = Process Failed, True = Process Complete
strProcessMsg = "Erreur a l'import" 'Text Message for the process
InboxPath = DW.Connection.PstrDirInbox & "\"
'********* Gestion avant import du ficher SILTIME-SOLEDAD *********
If strLoc = "SILTIME-SOLEDAD" Then
FilePath = InboxPath & strFile
Set fso = CreateObject("Scripting.FileSystemObject")
If fso.FileExists(FilePath) Then
'*** Ouverture du fichier a importer ***
Set fs = fso.OpenTextFile(FilePath,1)
'*** Lecture de la deuxième ligne ***
fs.SkipLine
s = fs.ReadLine
'*** Récupération de la période ***
strCodeMois = Right(DW.Utilities.fParseString (s, 24, 1, ";"),2)
Select Case strCodeMois
Case "01" : strLibMois = "Jan"
Case "02" : strLibMois = "Fev"
Case "03" : strLibMois = "Mar"
Case "04" : strLibMois = "Avr"
Case "05" : strLibMois = "Mai"
Case "06" : strLibMois = "Jun"
Case "07" : strLibMois = "Jul"
Case "08" : strLibMois = "Aou"
Case "09" : strLibMois = "Sep"
Case "10" : strLibMois = "Oct"
Case "11" : strLibMois = "Nov"
Case "12" : strLibMois = "Dec"
Case Else : strLibMois = ""
End Select
strAnnee = Left(DW.Utilities.fParseString (s, 24, 1, ";"),4)
strLibPeriode = strLibMois & " - " & strAnnee
'*** Fermeture du fichier a importer ***
fs.Close
'*** Controle de la période du fichier avec la PERIOD du POV ***
If strLibPeriode <> strPer Then
'*** Erreur sur la période de chargement ***
RES.PlngActionType = 6
RES.PstrActionValue = "La période du fichier de chargement : " & strLibPeriode & " et le point de vue de chargement : " & RES.PstrPer &" doivent être identiques"
API.MaintenanceMgr.mProcessLog API.POVMgr.PPOVLocation, API.POVMgr.PPOVCategory, API.POVMgr.PPOVPeriod, CLng(2), CLng(False), CStr("Import cancelled"), Now()
Exit Sub
'*** Controle de la CATEGORIE du POV ***
ElseIf strCat <> "RM" Then
'*** Erreur sur la catégorie sélectionnée ***
RES.PlngActionType = 6
RES.PstrActionValue = "Le fichier SILTIME-SOLEDAD doit être chargé sur le scénario RM." & vbcrlf & "Veuillez sélectionner cette catégorie dans le Point De Vue."
API.MaintenanceMgr.mProcessLog API.POVMgr.PPOVLocation, API.POVMgr.PPOVCategory, API.POVMgr.PPOVPeriod, CLng(2), CLng(False), CStr("Import cancelled"), Now()
Exit Sub
End If
Else
RES.PlngActionType = 6
RES.PstrActionValue = "Le fichier est introuvable"
End If
End If
End Sub
Thank you in advance
SébastienHi all,
I would like to check if content of the file I want to import is similar to POV selection.
To do thaht I created a BefImport script that read the first line of my file and check Period and Category POV with date and category values on my file.
It work well, an error is displayed but the import still continue and finish successfully.
What I want is to block that import, so user must change POV to correctly import his file.
You can find below the script I use. Could anyone tell me what I have to add to block import ?
Dim fso, fs, s, objFilePath
Dim InboxPath
Dim strCodeMois, strLibMois, strAnnee, strLibPeriode
Dim lngProcessType
Dim blnProcessState
Dim strProcessMsg
'************************ Initialisation **************************
'Initialisation des états de flux FDM
lngProcessType = 1 '(See enmProcessType)
blnProcessState = 0 'False = Process Failed, True = Process Complete
strProcessMsg = "Erreur a l'import" 'Text Message for the process
InboxPath = DW.Connection.PstrDirInbox & "\"
'********* Gestion avant import du ficher SILTIME-SOLEDAD *********
If strLoc = "SILTIME-SOLEDAD" Then
FilePath = InboxPath & strFile
Set fso = CreateObject("Scripting.FileSystemObject")
If fso.FileExists(FilePath) Then
'*** Ouverture du fichier a importer ***
Set fs = fso.OpenTextFile(FilePath,1)
'*** Lecture de la deuxième ligne ***
fs.SkipLine
s = fs.ReadLine
'*** Récupération de la période ***
strCodeMois = Right(DW.Utilities.fParseString (s, 24, 1, ";"),2)
Select Case strCodeMois
Case "01" : strLibMois = "Jan"
Case "02" : strLibMois = "Fev"
Case "03" : strLibMois = "Mar"
Case "04" : strLibMois = "Avr"
Case "05" : strLibMois = "Mai"
Case "06" : strLibMois = "Jun"
Case "07" : strLibMois = "Jul"
Case "08" : strLibMois = "Aou"
Case "09" : strLibMois = "Sep"
Case "10" : strLibMois = "Oct"
Case "11" : strLibMois = "Nov"
Case "12" : strLibMois = "Dec"
Case Else : strLibMois = ""
End Select
strAnnee = Left(DW.Utilities.fParseString (s, 24, 1, ";"),4)
strLibPeriode = strLibMois & " - " & strAnnee
'*** Fermeture du fichier a importer ***
fs.Close
'*** Controle de la période du fichier avec la PERIOD du POV ***
If strLibPeriode <> strPer Then
'*** Erreur sur la période de chargement ***
RES.PlngActionType = 6
RES.PstrActionValue = "La période du fichier de chargement : " & strLibPeriode & " et le point de vue de chargement : " & RES.PstrPer &" doivent être identiques"
API.MaintenanceMgr.mProcessLog API.POVMgr.PPOVLocation, API.POVMgr.PPOVCategory, API.POVMgr.PPOVPeriod, CLng(2), CLng(False), CStr("Import cancelled"), Now()
Exit Sub
'*** Controle de la CATEGORIE du POV ***
ElseIf strCat <> "RM" Then
'*** Erreur sur la catégorie sélectionnée ***
RES.PlngActionType = 6
RES.PstrActionValue = "Le fichier SILTIME-SOLEDAD doit être chargé sur le scénario RM." & vbcrlf & "Veuillez sélectionner cette catégorie dans le Point De Vue."
API.MaintenanceMgr.mProcessLog API.POVMgr.PPOVLocation, API.POVMgr.PPOVCategory, API.POVMgr.PPOVPeriod, CLng(2), CLng(False), CStr("Import cancelled"), Now()
Exit Sub
End If
Else
RES.PlngActionType = 6
RES.PstrActionValue = "Le fichier est introuvable"
End If
End If
End Sub
Thank you in advance
Sébastien -
I just recently purchased Mini Golf. Since my iPod mini days I have been moving my downloaded music by using the iPod as a disc device to copy the files from the iTunes folder and then add them onto another computer and importing the new files into iTunes and then at that point syncing my iPod. This is because I have my own computer without internet access in my room and it makes things easier keeping everything separated. I have hit a road block with importing the game however. It tells me my computer is not authorized even though all my purchased media is still accessible. Any solutions?
One final note: My current "internet computer" used to download is not authorized. Reason being somewhere in the past some of my computers got used up and I forgot to de-authorize and here I am now. So could that causes the mini golf file to be "unauthorized" overall, is there a different protocol for the games?
Custom Built Windows XP 2.7 Ghz, 768 MB RAM, 128 MB nVidia Graphics, 120 GB SATA & 80 GB IDE, 80GB 5.5G iPodSorry, but what do you mean by "an established gamer account"?
Regards. -
Configration require for Import Purchase
Guru
I need the configration steps required for Import Purchase indetail step wise
Thanks
Sudhir BilwarDear Sudhir,
Please go through the configuration guide of block J83(Imports procurement) through the link below.
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
All the steps are given in chronological sequence.
Trust this helps.
Regards
Venkat -
I am well up the learning curve on Aperture, but still cannot figure out how to designate import destination. "Destination" in the "Aperture Library" block of "Import Settings" says "New Project" but is greyed out and I cannot type in it to make the change. At the bottom of the Import Settings pane there is a notice that Aperture will import the file(s) into a new project which has the name of an old project I deleted early on. I tried various combinations of settings in "Aperture/Preferences". I have been googling and searching here for several weeks on and off. What am I missing here? Thanks.
Frank -- thanks. So it is an Apple design feature:
"http://support.apple.com/kb/TS3380 When Aperture imports from an iPad, it uses Autosplit to maintain the iPad's album structure, rather than splitting images by date. This is usually only an issue if you use a camera connection kit to capture images from a camera to various albums on iPad. If you do not use a camera connection kit, you will likely only see images in the iPad's Saved Photos album. In this case, Aperture creates a single project named for the date of the oldest image in the Saved Photos album. Note: Aperture does not import photos you have already synced to iPad via iTunes; those photos will not be visible in Aperture's import window."
But I still wish I could control the destination folder for iPad imports. I don't use it much as a computer, but I often save photos to the iPad's camera folder from emails sent by family and friends. My kludgy workaround is to let Aperture import the iPad's selected photos to that destination project (named by Aperture for the oldest photo's date in the photos selected for import) and then drag them from that project to where I want them to be, then delete the project. Lot of extra steps.
Because I am a low volume photographer, I prefer to import my photos from cameras and the iPad to a fixed project I call "A Imported Photos for Sorting" and deal with them there. I use the "A" to keep this project at the top of the list for easy finding. -
"registry settings for importing and burning are missing..."
I have installed itunes and the appropriate quicktime, but am not able to import any music. When I put cds in the drive, they do not even show up. I'm not sure if there is some other program blocking this importing or showing up of cds, but I get a message that says,
"the registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall Itunes."
However, the reinstalling doesn't fix it, and I'm not sure what to change or fix about the other cd player/burners on my computer to make itunes work properly (the laptop is new, and came with windows media, jukebox, etc...). How do I make itunes the default cd burner? Or how do I fix this problem otherwise?
Thanks.
Dell Windows XPNo problem:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. MM061
iTunes 6.0.5.20
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
Video Driver: ATI Mobility Radeon X1300\ATI Mobility Radeon X1300
IDE\DiskWDCWD1200BEVS-75LAT0__________________02.06M02, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
IDE\CdRomNEC_DVD+-RW_ND-6650A___________________102C___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Maybe you are looking for
-
Running DS-5 armcc compiled code (PIC) under Windows EC 2013
Hi All, i just wanted to know if it is generally (officially) supported to run code that is compiled via the armcc (5.03) from DS-5 under Windows Embedded Compact 2013. Or if this is discouraged (reasons?). The problem i have: The bootloader contains
-
How to disable delete button in a form
HI can anyone show me the procedure to disable the delete button from oracle forms seeded and custom form oracle applications 11i. We are on form patch set level 18 Regards
-
Path in a file in Illu 18.1.01 not avilabel, if I open it in CS2 all is correct
A path in a file in Illu 18.1.01 not availabel, if I open it in CS2 all is correct. In both Win and Mac 18.1 versions I can´t change the path, the path only is shown. When I opend it first from an eps file the path was shown and choosable, after savi
-
Dear experts When I create TO with a delivery number via LT03, I can't create TO with partial quantity. Like the delivery quantity is 10, I only want to create a TO with quantity 5, but system show me an error message "Delivery items requiring proces
-
Problems with camera and photo booth
My camera shutter will not open, and in photo booth, the red drape repeatedly closes. I have closed the apps and also reset my iPad, but nothing works. Do I need to bring it to Apple?