CR Consistency check

Hi experts,
I'm trying to transport CRs from our system to another one. Before processing further, I'm making some checks: Syntax check and Request Consistency.
But I have a problem with a task: when I try to make the Consistency Check for that task, I get the following warning message:
Object messages: R3TR TABU BSPC_DL_STXTREP2
Object TABU BSPC_DL_STXTREP2 has object function "K", but no key
Object messages: R3TR TABU PPFTSFFXCU
Object TABU PPFTSFFXCU has object function "K", but no key
Object messages: R3TR TABU PPFTWFCU
Object TABU PPFTWFCU has object function "K", but no key
What is the problem? How can I solve it?
Thanks & Regards
Stefano

Looks like you learned something from this
Consistency Check of RPD without opening it
I expect you mark or update on this before you post any thing.
Try out if you can call any batch files from Answers, I dont think you call them.
Edited by: Srini VEERAVALLI on May 13, 2013 11:19 AM

Similar Messages

  • The time characteristic consistency check has produced an error     DBMAN     62

    Hi
    We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
    * Checked the respective PSA data field  which is fine. Dates are in correct format.
    * RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
    * Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
    NB: We are running on HANA database but the respective target is not yet HANA Optimised
    Details Figures Attached
    Any Idea.. What could  have gone wrong
    Regards
    Reshoi R

    Hi
    Record Number 2995 is shown in the figures attached.
    I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
    Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
    The cube is partitioned from month 01.2008 to 12.2015.
    Regards
    Reshoi R

  • Error during currency conversion and consistency check in a sales order

    Hi Experts,
    I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
    Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
    Thanks,
    Sri

    Hi Christophe,
    FYI
    Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
    Message Class - CRM_CUMULATED_I
    Message No     - 013
    Error during currency conversion for &1 and &2
    Message Class - CRM_CUMULATED_I
    Message No     - 008
    Consistency check: Logical key does not match
    Message Class - CRM_CUMULATED_I
    Message No     - 011
    Thanks,
    Sri

  • Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

    Hi
    We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
    'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
    I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
    i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
    i am stumped, any advice would be great!

    Hi
    Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261645</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
      </EventData>
    </Event>
    AND
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261646</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2034
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="49156">2034</EventID>
        <Level>2</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261649</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>FFFFFFFC</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        SPP
    Date:          21/01/2013 10:16:30
    Event ID:      16389
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying...  More info: .
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SPP" />
        <EventID Qualifiers="0">16389</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261650</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft Exchange Writer</Data>
        <Data>
        </Data>
        <Data>The writer experienced a transient error.  If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
        <Data>
        </Data>
        <Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
      </EventData>
    </Event>

  • Consistency check error in sender file content conversion

    Dear Experts,
    I am trying one simple File to File scenario in which i have only fields 1>salesorder_number 2>Description
    I created a txt file with line items "100,crudeoil" with file name as salesorder.txt
    In the sender file adapter i have configured the file convertion paramenters as follows:
    Document name : mt_salesorder_sender  
    Document namespace : http://se.com.sa/sec-sa-qax          "Namespace of message type
    Recordset Structure : document,*
    document.endSeparator : 'nl'
    document.fieldSeparator: ,
    document.fieldNames : salesorder_number,Description
    So after this if i run the scenario In file adapter i am getting the error like "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'document.fieldFixedLengths' or 'document.fieldSeparator' is missing Consistency check: no. of arguments in 'document.fieldFixedLength' does not match 'document.fieldNames' (0 <> 2) "
    Please let me know where i am going wrong.
    Regards,
    Santhosh

    Hi,
    please maintain the order as
    Recordset Structure : document,*
    document.fieldNames : salesorder_number,Description
    document.fieldSeparator: ,
    document.endSeparator : 'nl'
    Rgds
    joel

  • Getting error in DB02 after checking Consistency check Unknown objects in A

    Dear All,
    I have getting error in DB02 after checking Consistency check.
    Please find the details.
    I have queries.
    How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.    
    Missing in R/3 DDIC      1              11
    Consistency check of 07.04.2009 10:14:24                   
    -- Objects missing in the database          
    Primary indexes                  0
    Secondary indexes                0
    Tables                           0
    Views                            0
    -- Unknown objects in ABAP Dictionary       
      |   |-- DB tables                        1
          |-- DB indexes                      11
         |-- DB views                        12
    -- DB tables without unique index   1
    -- Optional indexes                         
    Too many indexes created         0
    -- Indexes not created            145
    Regards,

    Hi
    Check this may help you
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
    Regards
    Uday

  • Consistency check error in OBIEE 10g

    Hi
    I have the below error while doing consistency check.
    I was trying to join two fact tables by complex join, but getting below error
    NQSError:15009 Could not load navigate space for subject area
    NQSError: 15009 Multiple paths exist to table Plans.Circular joins schemas not supported
    Please suggest

    If you have to join fact tables in physical, make sure your logical layer remains a star.
    Either add both fact tables to one logical fact table source , or create two logical stars, where both facts are joined to all conformed dimensions.
    Note: if both facts are not at exactly same granularity, your reports will show incorrect results most definitely. So avoid fact to fact joins.

  • Reg: consistency check in recordset structure validation

    Hi all,
    I am doing FCC to FCC scenario, i am getting this error. Help me out, it is very urgent for me.
    Sender Adapter v2723 for Party '', Service 'bs_text2text':
    Configured at 2007-08-21 08:00:49 UTC
    History:
    - 2007-08-21 09:29:06 UTC: Retry interval started. Length: 2.000 s
    - 2007-08-21 09:29:06 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:06 UTC: Processing started
    - 2007-08-21 09:29:04 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:04 UTC: Processing started
    Regards,
    Ajay.

    Hi Ajay,
    Problem with the file content conversion parameters you specified in the sender file adapter. 
    Do let us know your DT structure and FCC parameters specified in adapter.
    Regards,
    Sumit

  • ERROR consistency check in  recordset structure validation

    Hi,
    I have a file that has the format below. The file is managed with the below content conversion parameters. However, it's not working and the error message that i get is "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 7: missing structure(s) in last recordset". Any idea, what when wrong? Thanks.
    Message Type defined:
    FileHeader            (occurrence = 1)
      ARPostingRecord    (occurrence = 1 to unbounded)
        RecordHeader       (occurrence = 1 to unbounded)
        RecordDetail          (occurrence = 1 to unbounded)
    Source file looks like this:
    01 Field1 Field2...Field-n  
    H  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    H  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    where:
    01 is the keyfieldvalue for FileHeader
    H is the keyfieldvalue for RecordHeader
    L is the keyfieldvalue for RecordDetail
    Specified parameters:
    FileHeader.fieldSeparator
    FileHeader.endSeparator
    FileHeader.fieldNames
    FileHeader.keyFieldValue
    RecordHeader.fieldSeparator
    RecordHeader.endSeparator
    RecordHeader.fieldNames
    RecordHeader.keyFieldValue
    RecordHeader.missingLastFields
    RecordHeader.keepIncompleteFields
    RecordDetail.fieldSeparator
    RecordDetail.endSeparator
    RecordDetail.fieldNames
    RecordDetail.keyFieldValue
    RecordDetail.missingLastFields
    RecordDetail.keepIncompleteFields
    ignoreRecordsetName
    Recordset Name:
    ARPostingRecord
    Recordset Structure:
    FileHeader,1,RecordHeader,1000000,RecordDetail,1000000

    >ERROR consistency check in recordset structure validation (line no. 7: missing structure(s) in last recordset". Any idea, what when wrong?
    When you are not sure about number of records for RecordHeader and RecordDetail, Please specify wildchar character. Dont give max numbers.  The errors says expecting the specified number for recordset and  since it is missing gives errror.

  • ERROR consistency check in recordset structure

    Hello All,
    Below is my input file format looks like:
    HEADER
    REC_1
    REC_1
    REC_1
    REC_2
    FOOTER
    And I have defined the Recordset structure as HEADER,1,REC_1,*,REC_2,*,FOOTER,1.But the occurence of REC_2 is optional (0 to Unbounded).
    Conversion of file content to XML failed at
    position 0: java.lang.Exception: ERROR consistency check in recordset structure
    validation (line no. 4: missing structure(s) before type 'HEADER'
    It looks like the error is due to missing REC_2 segment in the input file.
    Can you please tell me how to handle this in FCC
    Thanks,

    Hi Naresh
    IMHO, I don't think that the error is due to missing REC_2 in the input file.
    From SAP library, * includes also 0 occurence.
    Converting Text Format in the Sender File/FTP Adapter to XML - Configuring the File/FTP Adapter in Integration Directory…
    Under Recordset Structure, enter the sequence and the number of substructures as follows:<NameA,nA,NameB,nB,...>, where nA=1,2,3,... or * (for a variable, unlimited number, including 0).
    Please provide screenshot of your FCC configuration and also sample input file that is causing the error so that it can be analysed further.
    Rgds
    Eng Swee

  • Errors occur during executing consistency checks

    Hi all,
    During my phase"executing consistency checks", errors occur :
    X_STXH| Sender structure S_STXB is not assigned to the receiver structure R_STXB.
    It happened in PC001_PCL_CHECK sub-activity.
    The details as follows:
    ubactivity PC001_PCL_CHECK was started on 08.03.2009 at 22:10:02 by user LEEE03   |    |
    Check COBJ started at 08.03.2009 22:10:30 by LEEE03
    Check COBJ finished at 08.03.2009 22:11:04 by LEEE03
    Check HIER started at 08.03.2009 22:11:04 by LEEE03
    Check HIER finished at 08.03.2009 22:11:04 by LEEE03
    Check RELS started at 08.03.2009 22:11:04 by LEEE03
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    Check RELS finished at 08.03.2009 22:11:20 by LEEE03
    Check RULE started at 08.03.2009 22:11:20 by LEEE03
    Check RULE finished at 08.03.2009 22:11:29 by LEEE03
    Check DICT started at 08.03.2009 22:11:29 by LEEE03
    X_STXH
    Field TDNAME does not exist in the sender structure on sender system
    X_STXH
    Field TDOBJECT does not exist in the sender structure on sender system
    X_STXH
    Field TDID does not exist in the sender structure on sender system
    X_STXH
    Field TDNAME does not exist in the sender structure on sender system
    X_STXH
    Field TDOBJECT does not exist in the sender structure on sender system
    X_STXH
    Field TDID does not exist in the sender structure on sender system
    Check DICT finished at 08.03.2009 22:11:29 by LEEE03
    Check FIMA started at 08.03.2009 22:11:29 by LEEE03
    Check FIMA finished at 08.03.2009 22:11:31 by LEEE03
    Check RUMA started at 08.03.2009 22:11:31 by LEEE03
    Check RUMA finished at 08.03.2009 22:11:31 by LEEE03
    Check SELS started at 08.03.2009 22:11:31 by LEEE03
    Check SELS finished at 08.03.2009 22:11:33 by LEEE03
    Subactivity PC001_PCL_CHECK was completed on 08.03.2009 at 23:11:40 with status ERR
    I have searched in sap marketplace and also google, no results come out.
    Could anybody help me out?
    Thanks.
    Best Regards,
    Eric Lee

    I've implemented the note 1101544 in the central system
    executed the report Z_CNVTDMS_08_FIELD_SET with P_PHASE to 'S'.
    and after this, I re-executed the activity "Execute Consistency Checks" from the extended mode of the process tree several times.
    But it remains the same issue.
    Did I miss anything?

  • SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

    I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
    Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
    Luckily my solution only has 10 packages.  I have verified and re-verified that everyone is set to dontsavesensitive.
    I have verified and re-verified that the solution has the protection level to dontsavesensitive.
    What on earth is going on here?  I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
    Can someone please help me out here?
    The Degenerate Dimension

    Hi MMiligan,
    Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
    So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
    If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
    protection level corresponds to the value of 0):
    DTS:ProtectionLevel="0"
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Fileserver consistency checks failing 0x809909B0

    I have a file server with approx. 1.7TB of files which became inconsistent on the 8<sup>th</sup> of November, and has been unable to complete a consistency check since then. 
    Consistency checks fail with the error:
    The protection agent on <server> was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
    I have removed and re-added the server, including deleting the protected data from DPM disk, and reinstalled the DPM agent on the file server, but I still receive the above error when consistency checking. 
    DPM is System Center 2012 R2 v4.2.1254.0 on Windows Server 2012 R2. 
    The file server is running Windows Server 2012 R2 also. 
    KB2919355 is installed on both systems.
    I did have Dedup running on the file server, but have un-deduped the drive as part of troubleshooting this issue.
    Other servers backed up by this DPM server are being backed up fine, including a HyperV cluster, 2 exchange servers and 2 sharepoint farms.
    There are a large number of these errors in the DPMRA log around the time the job fails:
    5288       4F48      
    11/28     22:49:56.601      
    29          
    radefaultsubtask.cpp(355)          
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : CRADefaultSubTask: WorkitemID does not exist, {EB6F4726-E5C5-4958-B034-542518E5A931}
    5288       4F48      
    11/28     22:49:56.601      
    05          
    defaultsubtask.cpp(546)              
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceivedSpecific(pCommand, pOvl)
    5288       4F48      
    11/28     22:49:56.601      
    05          
    defaultsubtask.cpp(751)              
    [00000000013EE9D0]       50C1500F-0353-4D2A-8188-FC03612E2503
    WARNING          
    Failed: Hr: = [0x809909b0] : Encountered Failure: : lVal : CommandReceived(pAgentOvl)
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   Subtask failure, sending status response XML=[<?xml version="1.0"?>
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2137454160" Reason="Error" CommandID="RACancelAllSubTasks" CommandInstanceID="8a514c9b-6a62-42b4-a03b-0f938e3f20cc"
    GuidWorkItem="eb6f4726-e5c5-4958-b034-542518e5a931" TETaskInstanceID="50c1500f-0353-4d2a-8188-fc03612e2503"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="536872913"
    DetailedCode="-2137454160" DetailedSource="2"><Parameter Name="AgentTargetServer" Value="DPM01.domain.com"/></ErrorInfo></Status>
    5288       4F48      
    11/28     22:50:03.635      
    03          
    runtime.cpp(1376)         
    [00000000012F4850]       50C1500F-0353-4D2A-8188-FC03612E2503        
    FATAL   ]
    I have also tried the steps in this article with no change:
    https://social.technet.microsoft.com/Forums/en-US/107bdce0-e13c-427a-9341-07d4b558f007/dpmra-crashing-after-update-to-dpm-2012-r2-ur2
    Currently I have reduced the amount of shares being backed up to just ~400gb of data and I have it in a consistent state, but I need to get the remainder of the data backed up, and I can’t be in a situation where if it becomes inconsistent it can’t run a
    successful consistency check again.

    Hi,
    If you want to pursue this immediately, you can visit the following web site to open a support incident. The charge to your CC will not be processed until your case is resolved and closed, if it's a code defect in the DPM then we wave all charges.
    http://support.microsoft.com/select/Default.aspx?target=assistance
    In the Quick product finder, enter:System Center 2012 R2  - then select System Center 2012 R2 Data Protection Manager
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • OBIEE Consistency Check is taking too much time

    Hi,
    When I run consistency check globally, it takes too much time. Itt  is waiting after completing about %80 of it. I can't click on it, the application is freezing. How can I recover it? What can be the cause of this problem?
    Thank you for your attention,
    Regards

    Hello Mohan,
    The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
    Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
    Note 531923 - Audit Trail: Indexes on table DBTABLOG
    Note 579980 - Table logs: Performance during access to DBTABLOG
    Regards,
    Siddhesh

  • Recovery points and consistency checks are failing for one disk on file server. Access is denied (0x80070005)

     Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1 DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file
    and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial
    consistency check and recovery point creation worked as expected, however, since then it will not create another RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An
    unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery
    from the initial RP to verify that it was created properly, and that worked as well.

    Hi,
    Access Denied error is usually caused by Antivirus software.  Please disable real time scanning on the DPM Server for DPMRA process. 
    928840 You receive job status failure messages in Data Protection Manager
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;928840
    For DPM 2012 the path has changed.
    To resolve this problem, configure the antivirus program to exclude real-time monitoring of the Dpmra.exe program on the Data Protection Manager server. By default, the Dpmra.exe file is located in the following folder:
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\Bin
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

    Hi Guys,
    I'm having some issues updating the device packages for my RME 4.3.1 install.
    I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
    I pulled up the PSU.log and found the following:
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CM already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : _CURDFMVER=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : DFMVERSION=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Locking package repository..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Checking Dependencies...
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages]  : SharedSwim2900XL has 17 dependent packages
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageParserAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedDcmaIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[DistributionAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibSwim] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibSwim
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimJobOptionsAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SoftwareAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ConfigAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibCommon] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibCommon
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SystemAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageListAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ContainmentAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[FlashAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[MemoryAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[RemoteStageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimCCOAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedSwimIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedSwimIOS
    [ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest]  : No packages to pick ..Empty package set passed .
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : populateResolverResult]  : All selected packages failed consistency check..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Packages selected for install (satisfies consistency check) : []
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: No packages to be installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages]  : Releasing lock...
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Number of Events Loaded in init()6
    Before i started to bug TAC, I figured I'd post this here.
    Let me know your thoughts

    Looks like your package repository has been corrupted.  TAC can provide a procedure  to recover from this corruption.  The following DOC indicates  why this can happen and has suggestions on how to avoid these problems  from re-occuring.

Maybe you are looking for

  • I need a phone number to speak with a human being.

    Does anyone know how I can find a phone number to speak with a real live human being about a software purchase which I've paid for but can't download because they say I haven't provided proof that I'm a teacher (which I have already uploaded twice).

  • XML in JDeveloper ?

    Hi is it possible to develop XML using JDeveloper ? Is it possible to install the XSU within JDeveloper ? null

  • Streaming Issues from Mac Pro using Apple TV

    I have recently purchased a Mac Book Pro with retina display and tried streaming content using my apple tv (3rd gen). The picture streams (providing my bluetooth is off) but the sound continuously stutter. Does anyone know how to fix this?

  • Problem or recover database

    I am using Oracel 8i Version: 8.1.7.0.0. it was crash so I use following command to recvover database but error occurs alter database recover Sun May 28 13:10:54 2006 Media Recovery Start Media Recovery Log Recovery of Online Redo Log: Thread 1 Group

  • Opening PRE8 file in PRE7

    Does anyone know if there is a way to save a PRE8 file as an older version.  I've had so much trouble with PRE8, that I'd like to go back to PRE7, and see if I can at least complete the DVD. Thanks, Shama