CR for VS2010 Text/Field Object Alignment Issue

I have a report that displays several rows of data for each record. I have a mix of text and field objects on each of the rows. All objects are aligned correctly in the designer but at runtime there are a few objects that seem mis-aligned by about 5 px or so. It's like the object is vertically aligned to the top. It doesn't appear that there is a way to set the vertical alignment and i have checked the tops and heights of the objects. What else could cause this mis-alignment?

The link to http://screencast.com/t/aCzADERY is an actual design view, not the viewer view. I believe from your previous posts that you are using CR2010 and the ActiveX designer provided with that version of CR. What does the report look like when you actually view the report using the ActiveX viewer of the .NET IDE (e.g., in the .NET IDE, click the "Main Report Preview" tab.?
Alternatively, once again we go back to the original suggestion that Don made a while back on one of your posts. What does the report look like when viewed in the CR 2011 stand-alone version of Crystal Reports viewer?
- Ludek

Similar Messages

Text Field layout/size issues

Has anyone else noticed that when you add a text field component onto a layout, the view of it inside of JSC2 is not how it appears in browser? For example, I am staring at a JSC2 screen where the bottom of the line of text(label) aligns with the bottom of the text-field. However, once in the browser, the text field is a good amount larger (reader below) the label's bottom. From exploring, it seems like the text-field gains an extra grid size when translated from JSC2 to web. (My grid is set to 5 px, and the text-field only aligns once I make it 1 grid space too small). Is this the case? Possibly known bug, and is there any solution other then just make all of the text fields too small?
Thanks

I have a similar problem, and I think it is a bug to. The IDE display of a text field is about two times the size of the actual size of the text field displayed in the browser. I tried both IE 6.0 and Firefox and the result is the same, so it is not a browser specific issue.
I have to set the columns attribute of the text field almost twice as big big in the IDE display to get half as much in the browser. Overall it is irritating since my design view looks like my text fields are over lapping other components when that is actually not the case when I deploy it.

How to set fixed size for inputfile text field

Hi all,
I am using inputfile component to test file uploading so I created a simple upload page. When I finished upload the file, the input text field will "shrink" its size and change the size to adjust the file name. Is there any way to set a fix size for input text field?
Here is some part of the code:
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1">
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>
FileBean:
public void fileUpdate(ValueChangeEvent valueChangeEvent) {
RichInputFile inputFileComponent = (RichInputFile)valueChangeEvent.getComponent();
UploadedFile newFile = (UploadedFile)valueChangeEvent.getNewValue();
UploadedFile oldFile = (UploadedFile)valueChangeEvent.getOldValue();
Thanks,
Jerry

you can set columns attribute in af:inputfile. Please see highlighted area i have inserted to you code
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1" columns = "34" >
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>

InDesign CS6 how to set justification for form text field?

Hi everyone,
I've been playing with the ability to create form for PDF file but I haven't figure out how to set a center justification for a text field. By default it's left. Same thing for font, the one selected in InDesign while creating the form isn't used when editing the form in Acrobat.
Do I need to create a paragraph style with a specific name to preserve both attributes?
Thanks.

InDesign CS6's forms features are great, but you're looking as version 1.0 of the feature. Those features cannot be set in InDesign.
Furthermore, if you try to pick a font other than the standard ones at the top of the menu, don't expect that your form users will be able to pick those fonts when they open up the form in Reader or Acrobat. I'm pretty sure that custom fonts are not stored in the PDF form.

How to give for a text field 'max+1' value instead of sequence .

HI All,
I have a requirement like ,
For my text field i applied sequence by using groovy expression.Now i need to change that to 'max+' value of table Grid and display in the text field. Can please suggest me how can i implement .(JDev 11.1.1.3 v)
Regards,
Sindhu.

hi user,
if you want perform some increment operation . in auto means. donot prefer these thread given below..
there is lot thread of for creating sequence. based on the sequence it works perfect.
if i understud correctly means follow this
Increment operation // it perfoms some increment operation. not using sequennce.
button press
compliation problem // have a look at this
if cumes under cirumstance for multiple user on that scree or ui . probabaly this idea(max)or (some increment) will fails.
i i will prefer sequqnecs._
IN ADDITION INFO TO USER
JOHN SAYIGN EXACTLY
Edited by: Erp on Sep 25, 2011 9:46 PM

What is the Table name & Field Name for Clearing text field in F-53 Transac

Hi,
I need prepare a functional specification for Clearing text field in Check Register.I am not able to find the Table name and Field Name for Clearing text field in F 53 transaction code.Kindly provide me the Table and filed name.so that i can proceed.Kindly help me.
I will assign points.
Thanks
Sunitha

Hi
From the payment document you have to link to the clearing document (Number BSEG-AUGBL, same Fiscal year and Company Code) in the clearing document the text entered in the transaction can be found on item text (BSEG-TEXT).
RF05A is a Structure name
Ranga
Edited by: Ranga Swamy on Dec 4, 2008 7:55 PM

Where is Hint Box for Validation Text Field widget?

I want to enter a hint for my form.
I am following the instructions on the Adobe Using Dreamweaver CS4 page for Insert and edit the Validation Text Field widget page:
<http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSEB5440BC-453A-4101-928C-302199E7E02F. html#WS8E6EA74E-87AC-4a81-A5CC-2DB6FB451DE0a>
It says:
Create a hint for a text field
Because there are so many different kinds of formats for text fields, it is helpful to give your users a hint as to what format they need to enter. For example, a text field set with the Phone Number validation type will only accept phone numbers in the form (000) 000-0000. You can enter these sample numbers as a hint so that the text field displays the correct format when the user loads the page in a browser.
1. Select a Validation Text Field widget in the Document window.
2. In the Property inspector (Window > Properties), enter a hint in the Hint text box.
However, the is no hint box in my Propeties area.
How do I get this hint box to show up?
Dreamweaver CS4, Windows Vista

Hi David,
My Property inspector looks different than what you have below.
I do not have a Hint box and I do not have the Customize this widget.
I did have a Hint box and the Customize this widget for CS3, howver not for CS4
Alison

How to disable auto-complete for a text field?

I didn't find any attribute that controls this. Thanks!

Hi,
Recently I needed to use this feature, and after some research I found the answer.
Just sharing the solution.
I am aware that the auto-complete is a browser setting. But is there a way to let APEX not save the items entered before? Write a javascript?
Because I have implemented Google suggest for a text field. Every time the suggestions pop up, the auto-complete items will also appear at the same time, which is very annoying.Put on your Page Item > Element > HTML Form Element Attributes : autocomplete="off"
Bytes

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Reg Query For Multiple Text Fields

Hi all
I am New to this forum..
I am developing an application for generating reports.
In my application i have multiple text fields.
The user might enter any of the textfields or even enter all the fields.
In those cases how to use the query when some fields are empty??

Welcome to the forum.
It always helps to post a small, simplified example of what it is you're trying to achieve.
(When posting examples, put the {noformat}{noformat} tag before and after the example, so it will get posted formatted on this forum.)
In those cases how to use the query when some fields are empty??If your textfields serve as parameters/bind variables for you query, then you could use NVL.
Something like:select ...
from some_table
where col1 = nvl(p_col1, col1)
and col2 = nvl(p_col2, col2)
And how about wildcards (the '%' or '_' sign), by the way? Are they allowed as well?
You also might want to read about this approach:
http://www.oracle.com/technology/oramag/oracle/09-jul/o49asktom.html

Instance name and Var for Input Text fields

I have several Input Text fields, as a form, linked to a PHP
script for which I require Var's for each field.
But I also need Instance names for each field, so I can fix
the tabIndex.
Yet, everytime I test my movie, the text fields have their
Paths (_level0.fName) written in them.
They are normally blank, and I've tried putting in some text
of my own, but the Var name is still displayed in the text fields.
Is there any way I can stop that from happening, and keep
both the Instance names and Var's in-place.
As far as I know, I need both the Instance name (for the
tabIndex) and the Var (for the PHP script) or is there a way that
the tabIndex and PHP script will work with either of the two?
Thanks
Chaz.

Can you use a different name for ‘instance name’
and ‘var’? That seems to solve the problem but I
don’t know if that helps you in your situation.
For an example;
Instance name: test_txt
Var: test

If else conditional statements for dynamic text fields (as 2.0)

This is about a self assesment quiz.There will be four options and each one has a scale from1-5 ie "option a" has 1mark, "option b" has 2marks,"option c" has 3 marks, "option d" has 4marks and "option e" has 5 marks and we count the answerd and we display the scor for example if there are 20 question in it if they answered "option e" 5 times the score will be
25 and option d 5 times the score will be 20,anf if "option c" for 5 times the score will be 15,and "option b" for 3 times the score will be 6 and "option a" two times the score will be 2, and we add up all the score and display in a dynamic text field called "scor" and the total score is 68.And i have another dynamic text field called "tsc" where i have to display the tags like excellent , good, better ......ect.
Till now every thing is fine but i am unable to compare them it is displaying excellent even if i get 10 marks, i am unable to configure where i am going wrong.
If the score is greater than 55 "tsc" should display Excellent, if the score is greater than 41 or less than 55 "tsc" should display Best, if the score is greater than 26 or less than 40 "tsc" should display Better,if the score is none of the above "tsc" should display Poor.
This is my code on the submit button:
on (release) {
    gotoAndStop("sQ");
    if (scor>=55) {
        tsc = "Excellent";
    } else if (scor == 41 && scor<=55) {
        tsc = "Best";
    } else if (scor == 26 && scor<=40) {
        tsc = "Better";
    } else if (scor == 10 && scor<=25) {
        tsc = "Good";
    } else {
        tsc = "Poor";
where:
"sQ" is the frame name where i am displaying the score details
"scor" is the var name for the dynamic text field for displaying total score
"tsc" is the var name for the dynamic text field for displaying the tags llike good, Excellent, better, poor.....etc
Plese help.......

Use trace commands to make sure that what you think you are processing is what is actually hapenning.
Your middle conditionals are not written as you described them... any "==" should be ">="
It is recommended you get away from using the textfield var option... it can be troublesome to work with. Just assign an instance name to the textfield and assign the values to its text property... for instance, say you name it tscField, then you would use tscField.text = "Excellent";
Also, realize that the gotoAndStop command will not happen until after all the code executes in case that matters
on (release) {
    gotoAndStop("sQ");
    trace(scor);
    if (scor>=55) {
        tsc = "Excellent";
    } else if (scor >= 41 && scor<=55) {
        tsc = "Best";
    } else if (scor >= 26 && scor<=40) {
        tsc = "Better";
    } else if (scor >= 10 && scor<=25) {
        tsc = "Good";
    } else {
        tsc = "Poor";

Need a regular expression for the text field

Hi ,
I need a regular expression for a text filed.
if the value is alphanumeric then min 3 char shud be there
and if the value is numeric then no limit of chars in that field.[0-9].
Any help is appriciated...
thanks
bharathi.

Try the following in the change event:
r=/^[a-z]{1,3}$|^\d+$/i;
if (!r.test(xfa.event.newText))
xfa.event.change="";
Kyle

How to define the same font size,color for a text field label

hi all,
In my project i need to define the same font size & color for all the text field lables in the application.how do we can achieve this?
Thanks & regards,

...or you could use declarative components....
Not sure if skinning would prevent developers from overriding a look and feel??? hmmm not sure..
Grant

Set background color for conditional text fields by click of button.

Hi,
I am new to apex, the scenario is when i click on a button i.e. Save, it shoulld compare 2 fields P1 and P2 which are text fields.
If the value of P1 is greaterthan P2 then the whole P1 text field background color should change to "Red" otherwise in any other condition the P1 field should be "Green" color.
In which section the color function should be called on the Save button?
On the page in the HTML Header section i have added the below code but the background color is not getting set.
<script type="text/javascript">
function fncChangeColor()
var num1 = $v('P1');
var num2 = $v('P2');
if ( num1 > num2 ) {
document.getElementById("P1").style.background = "RED";
else {
document.getElementById("P1").style.background = "GREEN";
</script>
Can any one help me in moving ahead with this scenario with a detailed information.
Thanks,
Priyanka.

Hi,
Call function on button URL target
javascript:fncChangeColor()If button should submit page, then I think you do not need color field to green.
Just change to run submit function.
<script type="text/javascript">
function fncChangeColor(){
var num1 = $v('P1');
var num2 = $v('P2');
if ( num1 > num2 ) {
$x("P1").style.background = "RED";
return false;
apex.submit({request:"YOUR_REQUEST"});
</script>Regards,
Jari

CR for VS2010 Text/Field Object Alignment Issue

Similar Messages

Maybe you are looking for