CR into SAP integration
Hello, experts,
I am SAP/ Adobe Forms developer and a part of my job is to design Adobe forms in the Adobe tool (LiveCycle Designer) which is very closely integrated into the SAP GUI (the editor is opened within a SAP GUI screen etc.). When I create my form, activate it and create a "printing"/ ouput program from another Adobe tool (called ADS, a web service connected to the SAP and running on a java stack) I get my PDF file.
I would like to know if such integration exists for the Crystal Reports:
- if there is a Crystal Reports designer which is opened within the SAP GUI screen
- if the CR layout can be saved into SAP
- if I can write a ABAP program to get the CR output
- if there is some service to load a template and fill it with the provided data for me
Thank you for any inputs,
regards Otto
Otto Gold wrote:
>
you looking for topics around CR without SAP
> I look only for SAP related topics, means CR with SAP, thank you for understanding.
>
>
the CR Designer is a win32 app - so starting it from the BusinessOne frontend shouln't be too difficult because it is a standard windows app.
> Great, you didn´t tell anything new. So is LiveCycle designer for Adobe forms. And can be launched from SAP ERP/ SAP GUI. Why then I cannot launch CR designer the same way?
>
>
available on help.sap.com
> Great, you didn´t tell anything new. Many fancy things can be found there. The magic is to find one single document or HTML page in the terrabytes. But ok, I will spend some more days searching.
Hi Otto,
Are you having a bad day? That would be unfortunate.
Please don't let it out on our moderators, they do this moderation on the side and trying to answer as many of these open questions as they can in the time that they have available.
Ingo pointed to the help.sap.com, it is only fair for him and all moderators for you to jump over there and at least try to find the document. If after 5 minutes you are not successful, it is fine to post a reply.
Tried it, but didn't find the document, any link? Other members of SCN may be happy to provide that link. If you give them a couple of points even better.
To be kind to your fellow SCNers gives you karma reputation points and folks will be more inclined to help you the next time.
All the best, Mark.
(Who unfortunately doesn't have as much time anymore to help out in the forums )
Similar Messages
-
Query on integrating windows file server into SAP KM using WEBDAV
hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh NHi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André -
Error while Importing Integration kit Transport Requets into SAP ECC 5.0
HI ,
1. AT BO side -> I can see the many roles, but under 'role import tab' in CMC when i add any 'role' and click on update button,
system showing an error as below .
"Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC
5.0 When i imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
contain similar error. Now when i try to login into sap its going dump.Is there any possibility of reverting back the transport
requests.
Pls help me to fix these issues.
Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AMHi ingo,
Now i can able to transport successfully after following the order.
Thank you very much
Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
Earlier i have imported non unicode request numbers into sap unicode system.
tats why i got error.
Now i have imported unicode request number to unicode sap system with sequence.
Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM -
UOM issue of SR that push from third party integrated software into SAP
Dear SAP Expert/Guru,
Would like to seek for your advise what is to be done to check the issue of different UOM created in SR when push from thrid party intrgration software into SAP.
The material only being maintained 1 UOM which is PKT however, when the data being push from the integration software it created the material with the UOM CTN and this cause the whole SR cannot be used.
Is there any way to check between the data integration? The client is using BAPI to push the data.
Currently the client just implement PI module and the third party software is integrated with PI module.
Kindly advise is there any other way to check.
Thank you
Regards
Leonard TanDear Shailesh & Jurgen,
Due to the T-code CUNI is maintained as Fire Fighter in the production server, so I only can use the QA server to analyst the UOM maintained in the server.
Below is the result of the analysis:-
<u>ISO Code</u> <u>ISO code text</u>
CT CTN
PK Pack (assuming this is used as packet)
As in the Change Units of Measurement of Dimension: Overview. THe result as shown:-
<u>Unit</u> <u>Commercial</u> <u>Technical</u> <u>Meas.unit text</u>
CTN KAR CTN Carton(SC)
PKT PKT Pkt Packet(s)
When double click the "Units of Measurement, select any unit and click on the lens, here you will see a small box called ALE/EDI, you will get to see the ISO Code in the box and a small checkbox called primary code"
There is no checking being clicked at the primary code and nothing is being keyed in the ISO code
Kindly advise what is to be done? is it the ISO issue or is there any setting being done wrongly.
Thank you
Regards
Leonard Tan -
Cognos Iviews integration into SAP Enterprise portal 7.0-Error
Dear Experts,
I had integrated the cognos iviews into SAP Enterprise portal and facing some problems.
in the navigator iview i am able to see folder structure
Public Folders and My folders .
when i click Public Folders following details are coming
GoSales ( analysis ) | -->Product analysis
|--> Time vs Product sales
GoSales( Query)
OSD_CO3
on click of Product analysis (any link) link i am getting following error
Cognos 8 -> An error has occurred.
DPR-ERR-2079 Firewall Security Rejection. Your request was rejected by the security firewall.
CAF rejection details are available in the log. Please contact your administrator.
Apart form this images are not displaying in the portal iviews.
regards
ratnakarHi Ratnakar,
This might be a authorization issue, you might not have appropriate permissions to use the public folder. Contact the authorization team to resolve this error they might help you.
Rgs,
I.R.K -
How to import the transports from the SAP Integration Kit into SAP system
Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank youHi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri -
Integrating new acquistions into SAP : Approach
Hi
Our Client has decided to integrate one of their newly acquired companies into SAP. As a key technical resource i have been asked to identify critical areas within RICEF developments. What would be a good starting point for me ? I am new to this kind of work and was hoping if anyone can help me with the broad picture or approach to get me started. I do not expect anyone to spoon feed me or provide exact solutions.No replies.
Closing this old question. -
Problem while integrating windows file server into SAP KM using WEBDAV
Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol'.
ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
Please check the SPN by calling 'setspn -l IDBSRV8'.
If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol' and choose 'Add'.
Select 'Users or Computers' and enter IDBSRV8 as object name.
Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
Ganesh NatarajanHi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre -
Integration of BI Administrator into SAP Portal
Hi!
I would like to integrate BI Administrator into SAP Portal.
All the necessary steps has been succesfully executed
(Activation of technical content in SAP BI, Deployment of Business Package BI Administration 1.0).
The problem I have:
When I start one of the functions of SAP BI Administrator I get the Portal runtime error:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:42_19/01/09_0073_21754250
Refer to the log file for details about this exception.
Can some one help me to solve this error?
Thank you very much!
regards
AxelHi!
Thank you very much!
Yes, I did (add the everyone group there and have the enduser checked).
Do you know how to find (name of the log file ) the appropriate log file?
Thank you very much!
regards
Axel -
Unable to Load the Integration scenario into the Integration directory
Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
MeherHi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher -
How to upload data into SAP BW Info Objects using SAP XI
Hi,
I need to upload master and hierarchy data into SAP BW Info Objects using SAP XI as EAI.
Can anyone suggest me the best solution to do it.
Thanks in Advance,
Volker.Hi! Have you not checked the BW-XI Integration document? It is available on the main page of the SDN section for XI. Almost all the steps for the integration are there...
-
Extraction of data from SAP R/3 Bapi into SAP BW
hi,
i am extracting data from sap r/3 bapi into sap bw. can u please send me the link and documents of how to extract the data from bapi to sap bw.
Answers will be rewarded
Thanks
sd shahidHi Swapnali,
In your case you have to send process order to XI and you have a bapi that satisfies your requirement.
Here the solution depends what is the triggerring point of the Interface.
If you want that from SAP side Interface should be triggered, then Use ABAP proxy program
You have to craete a Abap proxy class using outbound message interafce defined in IR of XI.This can be done by transaction SPROXY.
Then create a program that call sync/async method that is created by Sproxy t.code.
In this way , when u will execute the proxy program in R/3 , then call will be made to BAPI in Sap from XI server and u will get output back to your proxy program.
If your requirement is to not to trigger from SAP then nothing is required in R/3 side.
In XI , Bapi will be added in imported objects in Integration repository and bapi will be called.
Hope this will help u.
Please revert in case of queries.
Regards,
Monica -
Error while installing SAP integration kit 3.1
Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advanceHi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos -
Import very large csv files into SAP
Hi
We're not using PI, but have middleware called Trading Networks. Our design is fixed (not my decision) to not upload files into Application Server and import it from there. Our design dictates that we must write RFCs and Trading Networks will call the RFC per interface with very large file sent as table of strings. This takes 14 minutes to import into SAP plain Z-table from where we'll integrate. As a test we uploaded the file to Application Server and integrated into Z-table from there. This took 4 minutes. However our architect is not impressed that we'll stretch available Application Server to it's limits.
I want to propose that the large file be split in e.g. 4 parts at Trading Networks level and call 4 threads of the RFC which could reduce integration time to e.g. 3 minutes 30 seconds. Is there someone that has suggestions in this regard especially about a proposed, working, elegant solution for integrating large files with our current environment? This will form the foundation of our project.
Thank you and best regards,
AdrianZip compression can be tried. The RFC will receive zip stream which will be decompressed using CL_ABAP_ZIP.
-
BO XI 3.1 SP3 - SAP Integration Kit: Transports
Hi All,
My question is regarding the transports that need to be imported into SAP system so that it can connect with BOE. We are connecting our BW system with BOE, please let me know whether we need to move all transports in BW system only or we have to move transports in R3 system as well.
Thanks in advance.Hello Ingo,
Please help us in solving the below issue:
We have installed BO XI 3.1 version with the following configurations.
Windows 2003 Server, SP2 64bit Version
Java: JDK 1.7 and JRE 1.7
BW: BW 3.5 version
BOE in Tomcat 5.5 App server
SAP integration kit 3.1 32 bit (51040568.zip)
The issue is that while integrating BOBJ with BW to import all the roles for SSO, we are unable to find the exact JCO files for doing the same. We tried with JCO 2.1.8, JCO 2.1.10 and JCO 3.0, but all the versions turned futile. After the initial installation with JCO 2.1.8 version (as per to Installation guide) we found neither CMC nor Java Infoview are working.
Please help us in identifying the right JCO for the proper installations and do we need to install SAP integration kit 3.1 SP3 ? This is pretty urgent
Regards,
Rajib
Maybe you are looking for
-
Error in creating CUP request on GRC AC 5.3 SP12
-- Request dump for Action Path is scrTopNav.cfg 2010-09-27 20:14:00,416 [SAPEngine_Application_Thread[impl:3]_13] DEBUG AEFrameworkServlet.java@541:logRequest() : initTabName:0::config_request_type# 2010-09-27 20:14:00,416 [SAPEngine_Application_Th
-
No matching records found 'AR Down payment invoice'
Hello, We are on SAP B1 2005A PL50. We have entered AR downpayment invoice copied from a sales order. Then we entered sales delivery copying from the same sales order. On the AR invoice screen upon clicking the 'Total downpayment' we get the message
-
I click File>Print. Whether I open pdf in Preview, save to pdf, or just print, I get this error. The first page is fine, but all the rest are shifted up and to the right and magnified. I've never been able to print out a multi-page document on Firefo
-
hi guys,i am a macbook user & i am using micromax data card with this.now i am facing some problem in connectivity.how to troubleshoot??
-
Remove grid lines when printing
I am trying to print a set of financial statements and do not want to see the grid lines when printing the final document. I cannot work out how to do this. Some posts I have read say that grid lines are described as cell borders and suggest that the