CR , LF dont work in the signature field

Hi ,
i am trying to have 4 lines in my signature.
Name
Designation
Extension
Email
But when i try to do the same in the signature field it comes in one straight line without the CR or LF's is this a bug??
NameDesignationExtensionEmail
Am using a N-95 on the latest firmware and MailForExchange 1.61
Help is much appreciated..
thanks,
Vince

02-Jul-200708:26 PM
vin_eme wrote:
Hi ,
i am trying to have 4 lines in my signature.
Name
Designation
Extension
Email
But when i try to do the same in the signature field it comes in one straight line without the CR or LF's is this a bug??
NameDesignationExtensionEmail
Am using a N-95 on the latest firmware and MailForExchange 1.61
Help is much appreciated..
thanks,
Vince
I haven't used MailForExchange so what I am about to say might not be applicable BUT if you press the * key on your keypad, this should bring up the Extra Characters page - on here you should see the CR key which looks like an arrow going vertically down and then horizontally off to the left - select it.
Does this work ?
Regards,
Edward

Similar Messages

Setting up the signature field to work with Entrust

Good afternoon everyone,
Im looking into signautres today and i would like to get a complete walkthrough as to what i need to setup under the signature fields when i press the "settings" button.
Right now there's a bunch of tabs that are available but i hhave no idea what information is required under each one in order to have the Entrust key work with them
My goal is, right now, is to just setup the signature field so that it uses Entrust certificate info of the user trying to sign my form. I have no idea how to get this started
I found my Entrust digiture signature file, i think its got the following extension: .p7c but that dont seem to be enuff to get me going.
When i press into the signature field, i want to populate this one automatically based on the user's entrust cerficate info, Help!!!!!
If you need more details, i will gladly add it to the post. I just really want this to work
Thank you so very much,
Patric

each of your employees will require their own pfx/p12c/entrust key. if you use unverified certs (ie. you created them yourself or they are not from a trusted CA) then when another user opens up that file on another machine, they may find the sig is unverified since they cant' verify the sig.
when they click on the sig field, it'll bring up a dialog box to select the key and require them to enter the pwd.
After that, i think reader remembers and it'll show the last sig file used in the drop down by default. The user will only need to enter in their pwd.
When they save the file their sig will be embedded into the form.
You may need LC ReaderExtension to extend your form so ppl can save and can add digital sigs with Adobe Reader. Otherwise, they would all require Acrobat.

How to left align the signature field of dynamic pdf

Hi,
I am working on dynamic (interactive) pdf and using Adobe LiveCycle Designer (Adobe Acrobat 9 Pro). My problem is that I cannot align left the signature field of my pdf. I can align left, right and center for textboxs and cannot just do that for signature field. When I couldn't do that from GUI I went to XML code for signature and tried this:
<para hAlign="left"/> but it still didn't work. Ideally it should have worked.
I would really appreciate if you could help me.
Regards,
Kiran

Use skinning. Use the following skin selector:
af|panelFormLayout::label-cell {text-align: left; }If you want to apply it only on particular panelFormLayout, then set a custom styleClass on the given <af:panelFormLayout> tag (for example, <af:panelFormLayout styleClass="MyStyleClass" ... >) and use a styleClass-dependent skin selector:
af|panelFormLayout.MyStyleClass::label-cell {text-align: left; }Adding a custom skin is easy. If you do not know how, see this topic in the documentation: 20.2 Applying Custom Skins to Applications
Dimitar

Problem with the Signature field

Hi All,
Good day. I am having problem making a script work in the Adobe LiveCycle. Basically what I am trying to achieve is lock most of the fields on a form when the signature field is click. Note: Not all the fields should be locked. I then wrote a sample script with one of the field as follows:
if(employeeSig.rawValue !=null){
EmployeeLastNa.access = "protected";
But surprisingly it does not work. I have placed this code on the Click, PostSign, and even PreSign events, respectively, but it does not work. I am just wondering what I may be doing that is wrong.
Thanks
v/r
lucp

Hi -
rawValue does not work on signature fields, so that code will do nothing. Use the collection feature in the signature panel to lock particular fields:
Create a collection then modify it to lock whatever fields you need.

Populating the Signature field of OIM UPA table

The OIM UPA table has a SIGNATURE field which customers can use for storing digital signature of the snapshot (for non-repudiation purposes).
By default - the value of this field is "NULL" in the database.
Did not find any documentation on how this field is populated.
Has any one made use of this non-repudiation feature.
Thanks,
Chetan

If you want this functionality it is actually not that hard to create a scheduled task that populates the signature field using a third party non repudiation provider.
Doing local non repudiation is per definition non useful so you do need a trusted third party (i.e. Guardtime (http://www.guardtime.com/)) that provides the service.
Best regards
/Martin

Properties of the Signature Field

How can I extract certain properties of the Signature Field?
Basically I want to extract the name of the Signator in order to assign rights. I also have a "Approved Name" Field that the user fills out and I feel I can eliminate that field and ensure accuracy.
Any Advice?
John Sarradet
New Orleans

Take a look at the SignatureInfo object in the Acrobat JavaScript reference. You can get a SignatureInfo object in a Designer form using script like the following.
var acroSOM = SigField.somExpression.substr(15, SigField.somExpression.length - 1);
var acroField = event.target.getField(acroSOM);
var sigInfo = acroField.signatureinfo();
Chris
Adobe Enterprise Developer Support

Adding an image when signing, but not in the signature field, in Reader

Hi,
I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
I have looked at the Stamper example, but this functionality is not avialable in Reader.
Thank you,
Magda

If you insert after signing you will break the signature!! You need to do any such stamping BEFORE signing.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 23:54:15 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adding an image when signing, but not in the signature field, in Reader
Re: Adding an image when signing, but not in the signature field, in Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619

I would make the signature field read only until something is entered in the mandatory fields.

I would make the signature field read only until something is entered in the mandatory fields.

Mina,
You can use LiveCycle Designer's Action Builder to easily achieve this.
Please go through online documentation for the specific version of LiveCycle Designer that you are using.
It is intuitive and very easy to use Action Builder (You will find this option under Tools Menu item of Designer).
--Santosh

How do you factory reset a iphone 4s if it dont work in the setting

how do you factory reset a iphone 4s if it dont work in the setting

vic17santos wrote:
how do you factory reset a iphone 4s
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

How do I lock a pdf except the signature field?

I'm using Acrobat X Pro. I want to send a form for others to sign, but I don't what the signer do anything to alter the contents of the form except signing. Can I do that? If I can, how? Thanks!

You can certify your PDF (provided that it does not have any signatures yet). However, the permissions granulation in Acrobat UI does not allow you to distinguish between signature fields and other field types. So, if you allow others to sign this PDF you also allow them to fill other form fields, which is not what you want. You need LifeCycle solution that has more granular permissions handling but this is an expensive piece of software. If you distribute many PDFs like this it may make sense for you. If your volume does not justify this investment you can do the following:
If you do not have other signatures you can flatten your PDF form (Google "flatten PDF form in acrobat x" to learn how to do it), add one or several new unsigned signature fields, certify with "form fill-in and signing" permission (this PDF does not have any form fields other than signature fields anymore), so that the content cannot be changed and send it to the signers.

Button onclick not working in the calculated field

Hi Everyone,
I have to add the button in the calculated field through list definition. On click of button it should call the java script function. I can add the button but on click event is not working.
this is my code:
<Field Name="Accept" ID="{1F7328C7-D7F0-4B94-BB15-01859CD28CF2}" DisplayName="AcceptorDecline" Type="Calculated" ResultType="Number" ReadOnly="TRUE" JSLink="/_layouts/15/CCAR.SP.Common.Lists/UserRecertification/UserRecertificationScripts.js">
<Formula>
="<div id='divAccept'> <input type='button' name='btnAccept' id='btnAccept' value='Approve'
onclick=""UpdateAcceptorDecline('"&[URID]&"','Approve')""/>
</div>"
</Formula>
<FieldRefs>
<FieldRef Name="URID" />
</FieldRefs>
</Field>
Please help me on this issue. Thanks in advance.

Hi,
According to your description, my understanding is that you want to add button in a calculated field to call custom JavaScript function.
I suggest you can use concatenate formula function to achieve it.
You can add button use concatenate function like below:
=CONCATENATE("<input type='button' name='btnAddToBasket' id='btnAddToBasket' value='Add to basket' onclick=","addToBasket('",[Document Name],"','",[Original],"')"," />")
More information:
How can I get a button in SharePoint to display info about a record?
CONCATENATE function
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Workflow not working if the trigger field isn't in the list view!

I have a list that displays important dates, and I have set up a reminder date column which calculated the reminder date by adding 7 days on to the set date. I then have a workflow that emails out reminder of this task if the reminder date matches today.
I have noticed that if I include the reminder date column in my list view, the workflow works fine. But as soon as I remove the reminder date field from the list view my workflow no longer works. It's obviously quite confusing to other having this reminder
date column there when it is only needed to trigger a workflow, so how do I trigger the workflow without having it on view?
Thanks!

Hi Sarah,
As I understand, you have a Date column for user to set date, then you want a reminder date to add 7days to Date column. Then you would like to trigger a workflow if reminder date matches today.
If you do not want reminder date in the list, you could use the workflow 2013 action Core Actions > Add time to Date, to set a workflow variable to replace reminder date, and compare with today. Then you could omit reminder date column.
If you do want reminder date in the list, please try hide reminder date column in the list and test the issue again.
http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2013/06/03/how-to-hide-a-sharepoint-list-column-from-a-list-form.aspx
Regards,
Rebecca Tu
TechNet Community Support

The danish letters æ ø å dont work in the blog

If the letters æ ø å are used in the titleline in the blog funktion, the link will not work.
the retun message looks like this:
The requested URL /TikkeTakke/Tikke_Takke_._Nyhedblog/Optegnelser/2007/10/18Ã…bningsreceptionen.html was not found on this server.
Even if the letter are cut away it will not work.
anyone have a solution to the problem?

I'am using fetch version 5.2.1 as FTP program
It seems like fetch dont offer any setup to UTF-8
i'll try to use Cyberduck
(yes - i dont use .mac it is wery wery slow if you try to use i from denmark :o) so - i miss the function password etc)

Snmp commands dont work once the thread starts

I am using multi-threading. Once my thread starts executing (using the CmtScheduleThreadPoolFunction), I am not able to run simple get and set snmp function, basically they never return. Any suggestions?
Thank you all in advance.

Hi qsa301,
Does your function call work without multithreading?
Is the function documented to be able to be called by multiple threads?
Here are some KnowledgeBases about CVI and multithreading:
Executing LabWindows/CVI Internet Library Functions from Multiple Threads
http://digital.ni.com/public.nsf/websearch/88AC3C540ACFE65186257021005D2084?OpenDocument
Multithreading in LabWindows/CVI
http://zone.ni.com/devzone/cda/tut/p/id/3663
General Information on Multithreading for C Programmers
http://digital.ni.com/public.nsf/websearch/6ECCBAA87476EB22862568950071CCD6?OpenDocument
Sending Parameters to a Thread Callback Function in LabWindows/CVI
http://digital.ni.com/public.nsf/websearch/A50A89929B77EE06862571BF0015F42F?OpenDocument
LabWindows/CVI and Thread Pools
http://digital.ni.com/public.nsf/websearch/F968F9F8B100393786256D25005EAF8A?OpenDocument
Gavin Fox
Systems Software
National Instruments

My power button, volume down and up button dont work, and the phone itself is bent. What should I do?

Ive had my iPhone in a case since I've had the phone, I'm really dissapointed in whats happening to it.
Even with the case on, I very rarely drop it. Any suggestions or options on how to solve?

With so many serious issues, make Genius Reservation and take iPhone to Apple Store for evaluation. Maybe the Genius will handle all this under Warranty. If not covered due to being bent, but you have AppleCare + plus, it will only be $50 for a perfect replacement iPhone 5 exactly like yours. If no coverage, it will be $229.

CR , LF dont work in the signature field

Similar Messages

Maybe you are looking for