CR runtime 13: report not displayed in production environment

Hi, i've the following situation..
i'm developing on VS2010 a webapp using the final release of CRfVS2010 (s.o. is Windows 7 Ent x64) without any problems.
Today i'm trying to test the app on a server (Windows Server 2003 with CR2008 redist already installed for a previous site) but i've some problems.
First i've installed .net framework 4, then CRRuntime_32bit_13_0.msi, all installation ok.
When i published the app (file system mode), the first time an error occurred, because was impossible to load log4net assembly. I've solved it inserting a new reference and setting 'copy locally' for publishing.
Next error is that the report is not displayed
I've copied from wwwroot the aspnet_client folder into my webapp folder.
I've copied the report on the server into the right folder which i've granted everyone access to read and write.
No report displayed
I don't know to do because in the iis log or in the windows events i'm not found errors. I've tried to make a remote debug but the environment is not able to connect to the right process...
Any ideas? Thanks al lot

i've installed as domain admin (member of Administrators), everyone option were not present..
i see in C:\Programmi\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common these folders
Crystal Reports 2011\crystalreportviewers
SAP BusinessObjects Enterprise XI 4.0\win32_x86
it's all right?
now i've uninstalled the package and launched installation with cl command
msiexec /i crruntime_32bit_13_0.msi /Lime c:\temp\logfile.txt
i don't see errors, the last messages are:
Action start 9.37.51: CreateFolders.
Action ended 9.37.51: CreateFolders. Return value 0.
Action start 9.37.51: MoveFiles.
Action ended 9.37.51: MoveFiles. Return value 1.
Action start 9.37.51: InstallFiles.
Action ended 9.37.53: InstallFiles. Return value 1.
Action start 9.37.53: DuplicateFiles.
Action ended 9.37.53: DuplicateFiles. Return value 1.
Action start 9.37.53: PatchFiles.
Action ended 9.37.53: PatchFiles. Return value 0.
Action start 9.37.53: BindImage.
Action ended 9.37.53: BindImage. Return value 1.
Action start 9.37.53: InstallExecute.
Action ended 9.39.39: InstallExecute. Return value 1.
Action start 9.39.39: CreateShortcuts.
Action ended 9.39.39: CreateShortcuts. Return value 0.
Action start 9.39.39: RegisterClassInfo.
Action ended 9.39.39: RegisterClassInfo. Return value 0.
Action start 9.39.39: RegisterExtensionInfo.
Action ended 9.39.39: RegisterExtensionInfo. Return value 0.
Action start 9.39.39: RegisterProgIdInfo.
Action ended 9.39.39: RegisterProgIdInfo. Return value 0.
Action start 9.39.39: RegisterMIMEInfo.
Action ended 9.39.39: RegisterMIMEInfo. Return value 0.
Action start 9.39.39: WriteRegistryValues.
Action ended 9.39.39: WriteRegistryValues. Return value 1.
Action start 9.39.39: WriteIniValues.
Action ended 9.39.39: WriteIniValues. Return value 1.
Action start 9.39.39: WriteEnvironmentStrings.
Action ended 9.39.39: WriteEnvironmentStrings. Return value 1.
Action start 9.39.39: RegisterFonts.
Action ended 9.39.39: RegisterFonts. Return value 1.
Action start 9.39.39: InstallODBC.
Action ended 9.39.39: InstallODBC. Return value 0.
Action start 9.39.39: RegisterTypeLibraries.
Action ended 9.39.39: RegisterTypeLibraries. Return value 0.
Action start 9.39.39: SelfRegModules.
Action ended 9.39.39: SelfRegModules. Return value 1.
Action start 9.39.39: RegisterComPlus.
Action ended 9.39.39: RegisterComPlus. Return value 0.
Action start 9.39.39: InstallServices.
Action ended 9.39.39: InstallServices. Return value 1.
Action start 9.39.39: StartServices.
Action ended 9.39.39: StartServices. Return value 1.
Action start 9.39.39: RegisterUser.
Action ended 9.39.39: RegisterUser. Return value 1.
Action start 9.39.39: RegisterProduct.
Action ended 9.39.40: RegisterProduct. Return value 1.
Action start 9.39.40: PublishComponents.
Action ended 9.39.40: PublishComponents. Return value 0.
Action start 9.39.40: MsiPublishAssemblies.
Action ended 9.39.53: MsiPublishAssemblies. Return value 1.
Action start 9.39.53: PublishFeatures.
Action ended 9.39.53: PublishFeatures. Return value 1.
Action start 9.39.53: PublishProduct.
Action ended 9.39.53: PublishProduct. Return value 1.
Action start 9.39.53: InstallFinalize.
Action ended 9.41.29: InstallFinalize. Return value 1.
Action ended 9.41.29: INSTALL. Return value 1.
Action ended 9.41.29: ExecuteAction. Return value 1.
Action start 9.41.29: Exit_Dialog.
Action ended 9.44.03: Exit_Dialog. Return value 1.
Action ended 9.44.03: INSTALL. Return value 1.
=== Logging stopped: 30/11/2010 9.44.03 ===
MSI (c) (9C:2C) [09:44:03:143]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Installation operation completed successfully.
-> no success, same behaviour again
[quote]The install log for CRVS2010 shows we do install version 2.1.10[quote]
i don't understand this

Similar Messages

Crystal Report not displaying in production server

I am using crystal report with ASP.Net web application which is working fine on client machine, client machine configuration is: •Windows 7 64bit •Visual studio 2012 •.Net framework 4.5 •SAP Crystal Reports, version 13.0.2000.0 I need to deploy it on Windows Server 2008 machine; however, when I deploy web application on this machine Crystal Report opens when do not display data. Kindly help to get around with this issue. Thank you in advance

Please see if the resources that come up using the search string 'crystal blank empty net' will help. Search box is in the top right corner.
Also see:
http://scn.sap.com/thread/3531678
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

FAGLL03 Special Field Values Do Not Display in Production

We are using the new GL in ECC 6. I have a strange problem where special fields that were added to the line item transactions display in dev and quality but not in production. Please read the steps that I have taken.
1. Using note 984305 we defined special field BSEG-MATNR using this path:
Financial Accounting (New)
General Ledger Accounting (New)
    Master Data
      G/L Accounts
        Line Items
          Define Special Fields for Line Item Display
This field (U_MATNR) displays correctly in FAGLL03.
2. I used note 1034354 to create an implementation of BAdI 'FAGL_ITEMS_CH_DATA. Then I
followed the documentation of the BAdI to create structure CI_FAGLPOSX within FAGLPOSX and added these fields:
Material Type: field MARA-MTART
Material Group: MARA-MATKL
I added code to method CHANGE_ITEMS to read for those fields. Here's part of the code:
* MARA - Get Material Type and Material Group
    SELECT SINGLE mtart matkl
      FROM mara
      INTO (wa_items-zzmtart, wa_items-zzmatkl)
      WHERE matnr = wa_items-u_matnr.
The values of these fields display correctly in development and quality, but they do not display in production.
3. When I debugged FAGLL03 in development I found that the value of U_MATNR was filled when I stopped at method CHANGE_ITEMS. However, when I debugged in production, U_MATNR was not filled. It had to be filled at a later time because the value appears on the report. In my code, I am using U_MATNR to find the values of material type and material group. Because U_MATNR doesn't have a value at that point in time in production, my code doesn't find material type or material group.
4. I contacted SAP and was instructed to use note 984305. I executed the function module
ITEM_STRUC_EXTENSION which did not help.
5 I also used note 205096 to execute report BALVBUFDEL, but this did not help either.
6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
7. I tried to compare configuration between development and production, but everything looked OK to me.
Has anyone had this problem? Any tips?
Brenda

Hi Brenda,
>
Brenda Bankert wrote:
> 6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
I have no idea except that you can make sure Include CI_FAGLPOSX is active as well as the including FAGLPOSX. And please check the transport protocol(s) if CI_FAGLPOSX is included. If you have any kind of error/warning in the import protocol, that may give you a hint.
If nothing helps, create a new sap support case and tell them you are using SAP solutions without modifying anything.
Regards,
Clemens

SSRS report not displaying data in correct order

Guys,
I have a SSRS 2012 report not displaying returned records from SQL in the correct order. Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
on the dataset in question, likewise returns the data correctly. Only when I run the actual report does the data display incorrectly(always last name order). I've done similar reporting using very similar stored procedures and I've never had this
problem. Below is the stored procedure. "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL. Wish I could supply screen shots.
Thanks for any help,
Dave
ALTER PROCEDURE [dbo].[RAC_PT_List]
@Level as int,
@SortBy as int,
@PTLName as varchar(30) = NULL,
@User as varchar(10) = NULL
AS
SELECT pat.headerID,
pat.PT_LName + ', ' + pat.PT_FName AS PTName,
pat.PT_AcctNo,
rco.RCO_CLMREF,
rco.RCO_AppealLevel,
rco.RCO_LevelNo,
rco.RCO_AuditorStatus,
let.LET_DEN_DueDate,
CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
let.LET_DEN_Dollars,
let.userID
FROM Master_PT_List pat
INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
AND (rco.RCO_LevelNo = @Level)
AND (let.userID = @User)
--AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
ORDER BY
CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
END
DESC,
CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
END
DESC,
CASE WHEN @SortBy = '3' THEN pat.PT_LName
END

Hi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

Report not display in report viewer

i try to show ssrsc reports in asp.net web page using report viewer
code
protected void Button1_Click(object sender, EventArgs e)
ReportViewer2.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Remote;
ReportViewer2.ServerReport.ReportServerUrl = new Uri("http://lenovo-pc/ReportServer");
ReportViewer2.ServerReport.ReportPath = "/Report Project1/Report1";
ReportViewer2.ServerReport.Refresh();
where is the probelm... and why report not display?

Hello,
In SSRS, the issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential with "Stored Credential" of the datasource. You can refer to the following steps:
Click the black arrow of the report, select Security option.
Click Data Sources in the left pane.
1) If it is a "A custom data source”, please check the item "Credentials stored securely in the report server", and type the valid username and password. If the user is a Windows Account, you need to check item "Use as Windows credentials when connecting
to the data source".
2) If it is a "A shared data source", please remember the path, and then open the data source from the Report Manager. Make sure the credential type is "Credentials stored securely in the report server".
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Goods issue document is not displaying in production order

Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.

Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar

Functions (back & stop ) are not working in production environment

Hi All ...
Some functions (back and stop) are not working in production environment, where as those functions are working in QA testing environement..please answer.. what could be the reasons for not working some functions
in production environement.
Regards,,
Krishna

Hi,
Based on the error message, it is related to the item in your production environment, then the workflow will occur exception.
As your workflow worked perfectly in your other environments, I suggest you can check if some item has is valid in the document library.
You can try to use Fiddler to track the web request and find in which item the workflow occurs exception.
Here are some detailed articles for your reference:
https://msdn.microsoft.com/en-us/library/vstudio/ee231573(v=vs.100).aspx
http://www.andrewconnell.com/blog/SP2013-Workflow-Advanced-Workflow-Debugging-with-Fiddler
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Crystal Reports not displaying embedded OLE Objects in browser

I am building an .net web application. I am using VS2013 and have my report displaying ok in report viewer in the browser. Only issue I have is i have embedded images, checkboxes and empty checkboxes, to signify if a user has selected certain criteria. However, these images do not display at all. Instead, in Firefox, 'Image' is displayed in its place.
Please help. How can I get these images to display without having to try and figure out how to stream it to pdf and show pdf instead of the default crystal report viewer.
I have attached some screen shots for you as well.
Doug

Hi Doug,
Lots of posts on this issue:
http://scn.sap.com/thread/3544544
Has most of the info for you.
To get the runtime version you have installed add this to your app:
string CRVer;
public frmMain()
    // Required for Windows Form Designer support
    InitializeComponent();
    foreach (Assembly MyVerison in AppDomain.CurrentDomain.GetAssemblies())
        if (MyVerison.FullName.Substring(0, 38) == "CrystalDecisions.CrystalReports.Engine")
            //File:             C:\Windows\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine\13.0.2000.0__692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.dll
            //InternalName:     Crystal Reports
            //OriginalFilename:
            //FileVersion:      13.0.9.1312
            //FileDescription: Crystal Reports
            //Product:          SBOP Crystal Reports
            //ProductVersion:   13.0.9.1312
            //Debug:            False
            //Patched:          False
            //PreRelease:       False
            //PrivateBuild:     False
            //SpecialBuild:     False
            //Language:         English (United States)
            System.Diagnostics.FileVersionInfo fileVersionInfo = System.Diagnostics.FileVersionInfo.GetVersionInfo(MyVerison.Location);
            txtRuntimeVersion.Text += fileVersionInfo.FileVersion.ToString();
            // check if CrsytalDecisions.Enterprise dll's can be loaded ( Anything but Cortez - managed reporting )
            if (fileVersionInfo.FileVersion.Substring(0, 2) == "13")
                btnRasOpen.Enabled = false;
            CRVer = fileVersionInfo.FileVersion.Substring(0, 2);
            return;
    // TODO: Add any constructor code after InitializeComponent call
Don

[Urgent Help Required] Report not displaying

Dear All,
Please help me with a issue in running report from form. I am using the following code to run a report from a form. The issue is that when i click the button i get all the success messages which are in the code and a new browser window opens but my report is not displaying. Please can any one help me with this issue. I have to submit my project with a week so this is very urgent.
This is the code I am using:
DECLARE
     v_report_id Report_Object;
     vc_report_job_id VARCHAR2(100); /* unique id for each Report request */
     vc_rep_status VARCHAR2(100); /* status of the Report job */
BEGIN
     /* Get a handle to the Report Object itself. */
     v_report_id:= FIND_REPORT_OBJECT('REPORT7');
     message ('report found');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,cache);
     SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'HTML');
     SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, 'repserver90');
     vc_report_job_id:=RUN_REPORT_OBJECT(v_report_id);
     message (vc_report_job_id);
     vc_rep_status := REPORT_OBJECT_STATUS(vc_report_job_id);
     message (vc_rep_status);
IF vc_rep_status='FINISHED' THEN
     web.show_document 'http://localhost:8888/reports/rwservlet/getjobid='||vc_report_job_id ||'?server='|| 'repserver90','_blank');
     ELSE
          message ('Report failed with error message '||vc_rep_status);
     END IF;
END;

Any Help in this Regards will be highly appreciated

XML Publisher Report not displaying Chart/Graph in Excel Output

Hi All,
We are currently on Oracle EBS 11.5.10.2
I am facing an issue with XML Publisher based report when i try to fetch the output in Excel.
We have created an RTF in which i have embedded a graph. While viewing the output in PDF everything seems to work fine.
however when i try to run the report with output as Excel the Graph is not displayed.
Can you please let me know if i missed anything.
Also it would be very helpful if someone can tell me how to get the output of Excel in .XLSX format.
I have seen in various forums that you need to select the output type as Excel 2007, but i am not getting any such option while submitting the report.
I am on EBS version 11.5.10.2 do we need to install any patch to get the output option.
Regards,
Sandeep

Hi,
Check this links that might help you..
https://forums.oracle.com/thread/1018488
http://docs.oracle.com/cd/E10091_01/doc/bip.1013/e05000/toc.htm
Here the Exact solution from Oracle
In the XML PUBLISHER ADMINISTRATOR Resp..
Click the administration..
then Click HTML Output
Then in the Base Image URI Give the url of your application for example
http://Test.Test.com:8000/OA_MEDIA/
And then
Image File Directory give this as per your application setup
/u01/app/oracle/apps/apps_st/comn/java/classes/oracle/apps/media/
Thanks & Regards
Srikkanth.M

KE30 Report not displaying value in element line , why ?

Dear COPA Experts ,
IN KE30 ,there is a line element displaying for main prodcut (Value field used is Qty ) ,in the Same way i have created new element line for displaying by-prodcut qty (value field used is Qty ) ,after report generated and executed ,but it does not displaying the qty value of by -prodcut . but when drilling down to line item ,this KE30 is displaying line items of by-Prodcut .
the cost elements groups used for both are different and when run KE24 i was able to see by-Prodcut qty .
Can any one suggest ,wehther i have missed any setting ?
Thanks
Partha

Hi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

BI Publisher PDF reports not displaying correctly from EPPM 8.2

Hi,
I have setup EPPM to run BI Publisher reports as specified in the documentation. I can see all the reports correctly and can run the reports ok after specifying the reqd parameters. However, when the report completes and tries to open the PDF output in Acrobat, the screen flashes and no output is displayed. This is when running P6 within Internet Explorer. If I run P6 in Firefox, the PDF output opens correctly.
I presume this is due to an IE setting or because the add-ons aren't configured correctly. Has anyone had the same sort of issue ?, and if so, how did you fix it ?.
Thanks
Nik

Hi Khaja,
Font mapping is done using xdo.cfg file right ? If yes then yeah I have done it. But the barcodes are not displaying. Infact to display special fonts such as chinese,russian etc I have just pasted the corresponding ttf files under java home and not made any changes to xdo.cfg. But still the specail fonts are displayed properly.Problem is in displaying barcode fonts.
Thanks,
Kavitha

CR runtime 13: report not displayed in production environment

Similar Messages

Maybe you are looking for