CR V11 and ability to export as csv in crystalreportviewer

We just bought CR V11, I have SP 2 installed and I am looking to for the export as csv in crystaldecisions.windows.forms.crystalreportviewer.
I can export in code put we would like the option for users to export as one of the options in the viewer, we use this viewer everywhere in our code.
Does anyone know if this possible, I have spent a lot of time on this. I have u2ftext.dll installed and working.
I can do it in the trial version of 12 but we selected X11 for its compatibility with existing 10.5 reports, the sole reason for our upgrade was for this feature.
I notice in the release notes various bugs and fixes for this.
Can anyone tell me if I am flogging a dead horse, this feature was available in 8.5 and is in 12

Your horse is dead. For sure.
DHTML is web based viewer.
ActiveX viewer was included with the Report Design Component (RDC) that was normally used with VB 6 or other COM compliant languages. You can use the RDC in .NET but this has not been tested and is thus not supported. For more info see the following:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d
Also note that the RDC has been retired in version 12.x of Crystal Reports.
Ludek

Similar Messages

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Import from dsv files and export to csv files

hi every body..
how can I create a project in NetBeans which does:
1- import a .dsv (Delimiter-Separated Values) file content and save it to array
- the values in this format separated by fixed commas
example
"AIG" "Insurance" "64.91" "25/11/06"
2- export into .csv file (Comma Separated Value)
-the values in this format separated by commas
example:
AIG,Insurance,64.91,25/11/06

Well, you need to learn Java so you can read files, divide the data by the delimiters, and then write it out as a csv file.
Can't really give better instructions than that...maybe start by reading the basic tutorials?
We don't give out full program code here so you'll need to ask more precise questions. Such as what is it that you're having problems with.

Iphoto 5.0.4 stopped ability to export/drag and drop photos?

I have an older eMac, Tiger, (10.4.11), and all of a sudden my iphoto won't export photos. I cannot drag and drop or export in any other way. It is the drag and drop feature I need fixed the most...when I do try to move it to a folder(in finder), or desktop, or anywhere, a white circle with a cross appears. Any suggestions?
Used to work just fine. Haven't updated or changed anything...
Thanks,
M

Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window should open with the file selected. Does it?

10g exporting to CSV using client_text_io is not working correctly.

I have an odd issue which i could do with some help with. I run an function that exports to CSV based on an pre defined record group.
This has been working fine for many months with various customers. Recently a new customer used it and they have 28k rows in his record group and the export is actually not exporting correctly.
The record group has a record count of 28331.
The CSV produced has only 3756 in my CSV file. These are the last 3756 records in the Record group so its as if its overwriting the data as it goes yet all smaller datasets work
FUNCTION fun_export_csv (vgraphid NUMBER, p_filename VARCHAR2)RETURN BOOLEAN IS
out_file                     client_text_io.file_type;
     i                                             NUMBER;
lv_line              VARCHAR2(5000);
BEGIN
rg:=populate_group('RG11_EXP');
synchronize;
lv_line:= ('"GIN","Gin Date","PO Num","PO Required Date","Mat Num","Mat Description","Supplier Part No","On Time Delivery(Yes-1, No-0)"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
For i in 1..get_group_row_count('RG11_EXP') Loop--this count is 28331
lv_line:= ('"'||get_group_number_cell('RG11_EXP.col1', i )                ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.grn_date', i )                ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.po', i )      ||'"'|| ',' ||'"'||
     get_group_date_cell('RG11_EXP.daterqd', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.item_no', i ) ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.desc', i )                    ||'"'|| ',' ||'"'||
     get_group_char_cell('RG11_EXP.part_no', i )               ||'"'|| ',' ||'"'||
     get_group_number_cell('RG11_EXP.ontime', i )                    ||'"');
client_text_io.put(out_file, lv_line);
client_text_io.new_line(out_file,1);
END LOOP;
client_text_io.FCLOSE(out_file);
RETURN TRUE;

Hello,
Try to insert a "synchronize" instruction from time to time:
i pls_integer := 1;
Loop
If mod(i, 500) = 0 Then
     synchronize;
End if ;
i := i + 1 ;
End loop;
...<p>But keep in mind the the CLIENT_TEXT_IO generate a lot of network traffic, so it is better and faster to generate the file on the A.S., then after transfer it to the client machine.</p>
Francois

How export to csv work in safari browser? In my application export to csv open like a raw data in new tab. But other browsers working great!. Need to open in a csv file or save it as a csv file.

How export to csv work in safari browser?
In my application export to csv open like a raw data in new tab.
But other browsers working great!.
Need to open in a csv file or save it as a csv file.
Please suggest me. Thank you in advance!.

Hi Adrian,
Why don't you try any another software for opening CSV files then Notepad ? According to my experience, you can use these softwares to open an CSV files and they are:-
Microsoft Excel
Open Office Calc
Google Docs
Also there is an additional tool available known as CSV viewer. You may try this, download it from here http://www.csvviewer.com/
I've never used Notepad for opening CSV files, because sometimes it contains some symbols which are not not at all compatibile with Notepad.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Hide column in SSRS is not working while exporting to CSV format.

Hi,
I have a report where some columns are hidden based on parameter value. When I export to Excel all the hidden columns are hiding which is fine, but the issue is when I exported to CSV all the hidden columns are exporting to csv.
I tried to using " =IIF(Globals!RenderFormat.Name = "CSV", True,False)" in Column visibility but It is not working. When I select Hide option it is working fine. But I want to hide based on expression.
Any help !!!!!!!!

Hi sumancv,
In SQL Server Reporting Services (SSRS), we can control whether an item is visible in CSV separately from whether an item is visible in other renderers. As Shahfaisal Muhammed posted earlier, the CSV renderers use the DataElementOutput property to control
visibility. When an item has DataElementOutput=Output, it will appear in the CSV. When an item has DataElementOutput=NoOutput, it will not appear in CSV.
Based on my test, we cannot use expression to control column visibility in the report when it is export to CSV.
Reference:
http://connect.microsoft.com/SQLServer/feedback/details/742658/ssrs-csv-export-issue-for-hiding-certain-columns-using-expressions
Since the issue is by design, I recommend you that submit a wish to the Microsoft Connect at
https://connect.microsoft.com/SQLServer/Feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Report output Export to CSV issue

Hi Experts,
I have a Bex Query. After running the report when I export the report in CSV format using "Export to CSV" from the report output screen, the data
is being dumped in different columns And when i try to convert that particular CSV file to Excel as we can only select one single column for delimiting the values using a separator into different cells the data in the other column is being truncated.
Kindly suggest me how to resolve this.
Thanks in Advance,
Sushma

Hi,
(If anything else on the BW side doesn't help).
Not so long ago I had a similiar problem all data (originally taken from several columns) were in one column - solved it with the help of VB coding.
Sth like this could help you.
Regards, Leszek
    Dim tekst As String
    last_row = Selection.SpecialCells(xlCellTypeLastCell).Row
    Range("A1:Z" & last_row).Select
    Cells.Select
    Selection.NumberFormat = "@"
    For wiersz = 1 To last_row
         Cells(wiersz, 1).Select
         tekst = Selection.Value
         Cells(wiersz, 1).Value = Left(tekst, 21)
         Cells(wiersz, 2).Value = Right(Left(tekst, 27), 6)
         Cells(wiersz, 3).Value = Right(Left(tekst, 37), 10)
         Cells(wiersz, 4).Value = Right(Left(tekst, 50), 13)
    Next wiersz

After installed SP1 for SQL Server 2012, can no longer export to csv

After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
"Column "col1": Source data type "200" was not found in the data type mapping file."...
(The above line repeats for each column)
The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
no need to modify mapping.

I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
Here is the code I ran to create the test DB and table:
CREATE DATABASE testDB;
GO
USE testDB;
GO
CREATE TABLE testTable
id int,
lname varchar(50),
fname varchar(50),
address varchar(50),
city varchar(50),
state char(2),
dob date
GO
INSERT INTO testTable VALUES
(1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
(2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
(3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
(4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
GO
SELECT * FROM testTable;
Results look good:
id   lname   fname   address   city   state   dob
1   Smith   Bob   123 Main St.   Los Angeles   CA   2008-02-12
2   Doe   John   555 Rainbow Ln.   Chicago   IL   1958-05-30
3   Jones   Jane   999 Somewhere Pl.   Washington   DC   1965-12-01
4   Jackson   George   111 Hello Cir.   Dallas   TX   2001-07-18
In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
click Next. I type the following SQL statement:
SELECT * FROM testTable;
When clicking the "Parse" button I get the message "This SQL statement is valid."
On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
Thanks for your help.

"Export to CSV" option is not working.

Hi,
When I am trying to use "Export to CSV" option for "Item Price Deviation" report.
The issue happened, when we lock filter on "Spend by Category" report and then opened Item Price Deviation report. Then I selected More Actions --> "Export to CSV". But no File download pop up shown up.
Is it a known bug?
Regards
Gowtham

Hi,
Does give you message on the top of IE about File download blocked because of pop up blocker settings. I had faced similar issue but everytime you turn off the popup blocker and you should be able to download the report. Also try to download the report from other laptop to segregate this problem as application problem or desktop issue
Regards,
Sampat Desai

Report Export to csv doesn't correct translate additional characters in 3.0

Hi all,
i'am using apex 3.0 and the report export build in function does not export the correct german umlaut ( "ü" is translate to "Ã¼").
My characterset are
NLS_CHARACTERSET: WE8ISO8859P1
DAD CHARACTERSET: UTF-8

Go in "Application > Shared Components > Edit Globalization Attributes > Globalization" and change "Automatic CSV encoding" to YES. Should work!
Adrian

Export to CSV

Dear Experts,
We are on BI 7.0 and we came across the following problem :
When we wre exporting to CSV from Web template in Portal, each £ sybmol is accompanied by Â
ie.Â£ 1500 (where it should have been £1500).
When exporting to Excel/ excel 2000, it is working fine. And we export it Excel and save it as CSV, it's showing the values with £ sign only. But my client is not happy to export to Excel and then save it to CSV.
Has anyone come across with this?
Is there an outstanding update / OSS Note / patch etc. from SAP to correct this issue?Or is it more likely IMG seetings issue ?
Thanks

Hi Swapna,
There is one way to export to CSV and below are the steps that we follow.
1.     Execute the ABAP program Z_BI_QUERY_TO_CSV as batchjob. The previous csv file with same name will be removed from the SAP BI server. Then the program will execute the query (selection on the selection-screen).
2.     The query is executed by the OLAP processor.
3.     The OLAP processor will read the values for variables in the user-exit EXIT_SAPLRRS0_001 (RSR00001) (enhancement concept BEXVAR).
4.     The data is selected from DSO or infocube.
5.     The data is formatted to cvs-format (separator is selection field for the program) and saved on the SAP BI server in the directory DIR_CSV.
6.     After those files are created, the program Z_BI_COPY_FILE_TO_DESKTOP can be used to copy the files from the SAP BI server to your local PC. Must always be executed in foreground because there is interaction with the desktop.
7.     You can choose the local directory on the selection-screen.
I hope this will help you.
All the best,
Praveen

Error in Export to CSV

Hi all,
Its one more new problem i'm facing.
I have a search page (this doesnt uses oaquery, its fully custom handled search screen). I have added a exportButton to the page and i've choosen the option "Export All Rows" = True
When i have some search result data and try to click Export, i get a csv file which contains some exception stack trace rather than the comma delimeted search result.
Following is a part of the stack trace..
<META name="fwk-error" content="Error occured while processing the request">
<META name="fwk-error-detail" content="oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.NullPointerException: charsetName; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
java.lang.NullPointerException: charsetName
at java.io.OutputStreamWriter.<init>(OutputStreamWriter.java:81)
can anyone figure it out ?!
Cheers !!!
Senthil

yup !! i had given it correctly.
The problem got solved.
This error was occuring when i was trying to run the page from JDeveloper, and i just thought i will move the code to server and test the rest of the page and got the export button to work.
basically, this export button is not working form JDeveloper, but anyhow its working perfectly from the server.
Cheers !!!
Senthil

Export to CSV - order is now by alphabetical column

I was using 1.2, and exporting to CSV, and the file was in table-layout order, so another app is able to import.
Now with 1.5 the export is in alphabetical column-name order - and the other app can't handle it.
Is there some setting to change the export behaviour ?
cheers, Tim

Why isn't that method suitable? Both use the exact same mechanism and all rows have to be retrieved anyway. What's more, I'm pretty sure 1.2 still executed the query 2 times extra before actually exporting the set, whereas 1.5.x "only" 1 time extra.
But it's not a bad idea to keep 1.2 around for some irritating issues, and 1.5 has it's advantage over other ones.
Regards,
K.

Help exporting in csv format

Post Author: Vivek Sharma
CA Forum: Exporting
Hello All,
Version of Crystal Reports: 11.0.0.1282
Wanted to find out if it is possible to export data from a main report and subreport together in csv format? So far if I export in csv format it only exports data from main report and not from subreport.
Thanks,Vivek

Daniel and Atul highlight the two different kinds of data out processes that Essbase supports: targeted exports of selected parts of the database and full backup/migration-ready exports.
You didn't state what you were trying to do, but you will want to follow one or the other approach, depending on need. I wouldn't, for instance, use a targetted export to write out the entire db -- it would be very slow (to put it mildly). By the same token, writing out the entire db to a comma delimted columnar file to get 50 records would be a bit of a time waster, too.
Regards,
Cameron Lackpour

CR V11 and ability to export as csv in crystalreportviewer

Similar Messages

Maybe you are looking for