CR XI R2 Cannot find Nth root - "Numeric Overflow" Error
In Crystal Reports Xi Release 2, when i try to perform a calculation within a formula X ^ Y where Y = 1/years and Y < 1, I receive a "Numeric Overflow" error when running the report. Is there anything that can be done to work around or fix this?
Thanks.
Hello Jay,
I'm assuming you meant 0 < years < 1
One limitation is that Crystal Reports uses IEEE double precision floating point representation for internal numerical computation. This limits the maximum expressible numeric value to approximately 10 ^ 308.
If computational results exceed this magnitude, the "Numeric Overflow" error will result.
Sincerely,
Ted Ueda
Similar Messages
-
OrgChart - Cannot find the root of your orgchart
Dear Experts,
I have done the required configuration for my NAKISA 3.0 SP 01 Verison with CE 7.1.
But when i am trying to acess the End user Link like http://ServerName:Port/OrgChart/default.jsp from the CE 7.1 Portal .
First Screen it self it shows the this Erorr message.
Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date.
I would like to try drilldown - i got this error information in my CDS.LOG file
1846. 24 Feb 2012 16:55:56 ERROR com.nakisa.Logger - [NakisaHRConnector.NakisaRfcChart]: Error retrieving data - : I:/NAKISA/RFC_CHART:000 HRWPC_STRUC_GET_MULTIPLE_ROOTS(PATH_NOT_FOUND)
1847. 24 Feb 2012 16:55:56 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_Chart : while trying to invoke the method com.nakisa.framework.data.DataTable.cloneShallow() of an object loaded from local variable 'p_dt_keyStructure'
So Can you please help me on crack this issue.
Reagrds
Dileep PI recommend this thread:
[http://forums.sdn.sap.com/thread.jspa?messageID=10995885#10995885]
Issue Reason: Issue happened as there are no available evaluation paths defined by Nakisa.
Solution: all the evaluation paths defined by Nakisa will be in the transport pkg provided by Nakisa. Import transport pkg to get the contents.
Stephen -
Cannot find the root of your orgchart. The orgchart box may have been delet
Hi All
I have searched to forum for similar issues, but none seem to apply to the errors I get in the CDS log.
When try-ing to view the Orgchart, in the Orgchart Console I get the following message "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified."
This is the entry in the CDS log.
6/29/2010 9:26 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
6/29/2010 9:26 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
6/29/2010 9:26 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
6/29/2010 9:26 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
6/29/2010 9:26 AM: ERROR: FieldsType : fieldName = 50000025; tableName = PositionEmpHierarchy; : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
6/29/2010 9:26 AM: ERROR: CommandProcessor.getDataSet : select top 25 ObjectId,ShortText,LongText,ParentNo,ParentName,Relation,ObjectType,Pernr,EmpAbbr,EmpName,PositionParent,Subty,Prozt,Vacan,Status from PositionEmpHierarchy where (ObjectId=50000025) order by Upper(ObjectId) asc, Upper(Pernr) asc, Upper(PositionParent) asc|DC=DestinationConnection : Source {.Net SqlClient Data Provider}: Message {Invalid object name 'PositionEmpHierarchy'.}
Any suggestions as to what I am missing ?Hi Spike,
There could be a number of reasons why the PositionEmpHierarchy table has not been created. My advice is to run an extract and then run each line of your join statements in your DB. This will highlight where the problem lies.
Good luck!
Luke -
Cannot find the root of your orgchart
Hi,
I have configured the Succession planning, Career planning, Manager and Talent Framework in Nakisa 3.1. When I log into below URL, it gives me the error "Cannot find the root of your orgchart". So far I followed the Admin guide for Succession planning.
http://hostname:port/Manager/default.jsp.
Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date
Log file:
535. 25 May 2011 16:26:55 INFO com.nakisa.Logger - Invoking action:setorgchartdirectory [SAPMyIndirectReportsOrgChart, manager]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
536. 25 May 2011 16:26:55 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
537. 25 May 2011 16:26:55 ERROR com.nakisa.Logger - com.nakisa.integration.sap.SAPConnector : HRMSS_GET_ORGSTRUCTURE_AS_XML : com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'ashost' is missing
538. 25 May 2011 16:26:55 ERROR com.nakisa.Logger - com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'ashost' is missing
539. 25 May 2011 16:26:55 ERROR com.nakisa.Logger - Bapi_Hroci.getDataSetBase() : java.lang.NullPointerException: while trying to invoke the method org.w3c.dom.Node.getNodeType() of an object loaded from local variable 'node'
540. 25 May 2011 16:26:55 INFO com.nakisa.Logger - setorgchartdirectory on OrgChartAppEventProcessor took: 197ms
541. 25 May 2011 16:26:56 INFO com.nakisa.Logger - Invoking action:refresh []. For processor FalconModuleControlAppProcessor. Against controller ModuleControlCtr
542. 25 May 2011 16:26:56 INFO com.nakisa.Logger - refresh on FalconModuleControlAppProcessor took: 31ms
Regards,
SagarHi Sagar,
Could you please check under data connection your connection string?
It should be the SAP connection string.
The format of the connection string:
ASHOST=SAPONE SYSNR=02 USER=USERNAME PASSWD=welcome1 CLIENT=800
SAPONE = SAP host name
02 = system number
USERNAME = username
welcome1 = password
800 = client number
Also, maybe this is a permission issue, please double check that
the user that you are accessing SAP with has the correct permissions.
Give them SAP_ALL if nexessary to investigate.
Hope this helps,
kind Regards,
Matthew -
Cannot find the root of your orgchart. ORGCHART 3.0 LIVE
Hello All,
I know in the forum exists many threads about this. But no help to solve my issue.
Let's...
I can't see to view my orgchart because the follow message:
Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date.
In the Log i have:
10502. 27 May 2011 18:50:48 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 28ms
10503. 27 May 2011 18:50:48 ERROR com.nakisa.Logger - com.nakisa.integration.sap.BuildingBlocks : null
10504. 27 May 2011 18:50:48 ERROR com.nakisa.Logger - java.lang.NullPointerException
10505. 27 May 2011 18:50:48 ERROR com.nakisa.Logger - Nakisa.SAP.SAPProcessor.BAPI_Hroci : null
10506. 27 May 2011 18:50:48 ERROR com.nakisa.Logger - java.lang.NullPointerException
10507. 27 May 2011 18:50:48 ERROR com.nakisa.Logger - com.nakisa.framework.data.paging.PageObject_Dynamic : executeSQL : java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
10508. 27 May 2011 18:50:48 WARN com.nakisa.Logger - ChartingProcessor : StartChart : Could not create nodes. Error message returned:Index: 0, Size: 0
I don't no whats happened.
Can anybody help-me?
ThanksThanks for reply.
The original problem is solved.
The Transport Package had not been done correctly.
But the message continues.
In the log i have:
363. 31 May 2011 11:42:00 INFO com.nakisa.Logger - com.nakisa.troll.baseapp.Controller : : Controller.java, No value found for argument key: idLI
364. 31 May 2011 11:42:00 INFO com.nakisa.Logger - Invoking action:setorgchartdirectory [SAPOrgUnitOrgChart, null]. For processor OrgChartAppEventProcessor. Against controller OrgChartCtr
365. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
366. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
367. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 221ms
368. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
369. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
370. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 90ms
371. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
372. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
373. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 63ms
374. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
375. 31 May 2011 11:42:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:1
376. 31 May 2011 11:42:01 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: HCM_GET_ORGSTRUCTURE_AS_XML took: 65ms
377. 31 May 2011 11:42:01 WARN com.nakisa.Logger - ChartingProcessor : StartChart : Could not create nodes. Error message returned:For input string: "True"
378. 31 May 2011 11:42:01 INFO com.nakisa.Logger - setorgchartdirectory on OrgChartAppEventProcessor took: 523ms
Whats meaning this parrameter: iDli???
Thanks for advance. -
OrgChart error: Cannot find the root of your orgchart....
Hi,
I'm trying to install orgchart live.
When I run OrgChart - I got following error: "Cannot find the root of your orgchart...."
Well settings are following:
a) data connection: ASHOST=xxxxxxxxxxxx SYSNR=xx USER=xxxx PASSWD=xxxxxx CLIENT=xxx (this is OK)
b) General settings: 50000051 (for OrgChartRot - which is OK)
If i check CDS log I got following:
ERROR: StructGenerator : processStructureRules : Chart Is Empty (ChartingStruct.RootNodes == null)
Any idea?
Thx,
Damjansure....
<extrainfo>
<item>
<name><![CDATA[DLL]]></name>
<value><![CDATA[Nakisa.SAP.SAPProcessor]]></value>
</item>
<item>
<name><![CDATA[CLASS]]></name>
<value><![CDATA[Nakisa.SAP.SAPProcessor.BAPI_Hroci]]></value>
</item>
<item>
<name><![CDATA[ParentViewId]]></name>
<value><![CDATA[ZVWO2P]]></value>
</item>
<item>
<name><![CDATA[ViewId]]></name>
<value><![CDATA[ZVWO2O]]></value>
</item>
<item>
<name><![CDATA[ObjectType]]></name>
<value><![CDATA[O]]></value>
</item>
<item>
<name><![CDATA[Depth]]></name>
<value><![CDATA[3]]></value>
</item>
<item>
<name><![CDATA[PlanVersion]]></name>
<value><![CDATA[01]]></value>
</item>
<item>
<name><![CDATA[BapiName]]></name>
<value><![CDATA[Hcm_Get_Orgstructure_As_Xml]]></value>
</item>
<item>
<name><![CDATA[AddChildrenFlag]]></name>
<value><![CDATA[True]]></value>
</item>
<item>
<name><![CDATA[mail]]></name>
<value><![CDATA[]]></value>
</item>
</extrainfo>
do you see something here...
Any idea from here on...what should I do?
Edited by: Damjan Drnovsek on Apr 21, 2010 3:54 PM -
NAKISA Cannot find the root of your orgchart
Dear All,
Iu2019m triyng to built our Org Chart in Nakisa. Everything seems to be ok but when I try to see the published org chart the system show me this error: Cannot find the root of your orgchart.
And the CDS.log said:
12/23/2010 12:38 PM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
12/23/2010 12:38 PM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
12/23/2010 12:38 PM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
12/23/2010 12:38 PM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
12/23/2010 12:38 PM: ERROR: CommandProcessor.getDataSet : select top 25 ObjectId,ShortText,LongText,ParentNo,ParentName,Relation,ObjectType,NumSharedPosition from Scenario where (ObjectId=50000075) order by Upper(ObjectId) asc, Upper(ShortText) asc, Upper(LongText) asc, Upper(ParentNo) asc|DC=DestinationConnection : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.
Any idea?
Thanks in advance
LauraHello, back again after Christmas holyweek! Happy New Year for everybody!
Following your tips, i've check my DB connection. I've selected all the flags (Extract data from SAP, Execute joins on extracted data and Generate Analytics)
Everything is ok unless generate Analytics, which is sending me this an error:
Generating Analytic: Direct Head Count ...
Failed.
Generating Analytic: Indirect Head Count ...
Failed.
Generating Analytic: Direct Vacant Position Count ...
Failed.
Generating Analytic: Indirect Vacant Position Count ...
Failed.
Generating Analytic: Direct Open Position Count ...
Failed.
Generating Analytic: Indirect Open Position Count ...
Failed.
Generating Analytic: Indirect Chief Position Count ...
Failed.
Generating Analytic: Indirect Shared Positions Count ...
Failed.
Generating Analytic: Direct Employee FTE Count ...
Failed.
Generating Analytic: Indirect Employee FTE Count ...
Failed.
Processing Completed.
And talking about the CDS log for just the action of opening the OrgChart:
1/3/2011 9:24 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
1/3/2011 9:24 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
1/3/2011 9:24 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
1/3/2011 9:24 AM: ERROR: FieldsType : fieldName = ObjectId; tableName = Scenario; : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.}
1/3/2011 9:24 AM: ERROR: CommandProcessor.getDataSet : select top 25 ObjectId,ShortText,LongText,ParentNo,ParentName,Relation,ObjectType,NumSharedPosition from Scenario where (ObjectId=50000075) order by Upper(ObjectId) asc, Upper(ShortText) asc, Upper(LongText) asc, Upper(ParentNo) asc|DC=DestinationConnection : Source {.Net SqlClient Data Provider}: Message {Invalid column name 'ObjectId'.
Invalid column name 'ObjectId'.
Invalid column name 'ShortText'.
Invalid column name 'LongText'.
Invalid column name 'ParentNo'.
Invalid column name 'ParentName'.
Invalid column name 'Relation'.
Invalid column name 'ObjectType'.
Invalid column name 'NumSharedPosition'.
Invalid column name 'ObjectId'.
Invalid column name 'ShortText'.
Invalid column name 'LongText'.
Invalid column name 'ParentNo'.}
Let's see if SAP can help me!
Many thanks,
Laura -
Below is our environment,
App-v 4.6 SP2 Client installed on Windows Server 2008 R2 and managed with SCCM 2012 R2.
This server is part of Terminal Server Farm which contains two members.
Only one user is getting the error when launching one application. It doesn't happen when he launches other applications
The system cannot find the path specified.
Error code: 4625DD4-07D0082C-00000003
corrupt cp file detected ('Q:\AppName\osguard.cp'). osguard cp file, NO CORRECTIVE ACTION TAKEN
I have renamed the Application's userdata in both roaming and local appdata.
I have researched quite a bit about this and haven't anything solid. Most of the discussions suggest to clear the .fsd file and let the whole app layer re installed.
I am hesitant to do that as this is happening for only one user and for particular app.you can try to 'repair' the application: Ask the user to close all applications of that package, then use the App-V client MMC (sftcmc.msc) to locate the application entry. Right-click and 'repair'. This has to be done in the user's context/session
Falko
Twitter
@kirk_tn | Blog
kirxblog | Web
kirx.org | Fireside
appvbook.com -
Numeric Overflow error on NPer function
I am trying to use this NPer function and it's acting real weird. If I use the same numbers that my database fields hold, it works and when I switch to database fields it works fine one time and next time I try to refresh data, it gives me this "numeric overflow" error..
In Crystal help example, they shows that the payment has to be a negative number. So I am following that. If i switch it to the positive number, then it works bit it gives me negative # of months plus it's wrong number.
Not sure whats going on and would really appreciate any help...
Thanks
RajPlease re-post if this is still an issue or purchase a case and have a dedicated support engineer work with your directly
-
Numeric overflow error using binary integer
Hi experts,
I am facing issue while solving a numeric overflow error. after analyzing we came to know that in the below code BINARY_INTEGER is causing the issue as input is exceeding its range. I tried to replace BINARY_INTEGER by varchar2(20) but its saying
"Error(580,20): PLS-00657: Implementation restriction: bulk SQL with associative arrays with VARCHAR2 key is not supported."
We need to remove this binary_integer. I dont know how to do this. Can anybody give some idea or what code change required here ? thanks in advance. Cheers.. Below is the code,
===================================================
PROCEDURE UpdateCost_
p_Cost_typ IN OUT NOCOPY CM_t,
IS
TYPE ObjektIdTab_itabt IS TABLE OF ObjektId_tabt INDEX BY BINARY_INTEGER;
v_cost_IdTab_itab ObjektIdTab_itabt;
v_CM_ID INTEGER := p_Cost_typ.costm.CM_ID;
BEGIN
SELECT CAST(MULTISET
(SELECT Costwps.CMKostId
FROM CM_Pos_r NRPos,
CMK_z_r costzpps,
CMG_Cost_v Costwps
WHERE NRPos.CM_ID = v_CM_ID
AND NRPos.SNRId_G = SNRCT.SNRPos.SNRId_G
AND costzpps.CM_ID = NRPos.CM_ID
AND costzpps.CMSNRPosId = NRPos.CMSNRPosId
AND costzpps.Kost_s = Kost.Costnzl.Kost_s
AND Costwps.CMKz_Id = costzpps.CMKz_Id
AND Costwps.TypCode NOT IN
(SELECT kw.TypCode
FROM TABLE(Kost.Kostwt_tab) kw
) AS ObjektId_tabt )
BULK COLLECT
INTO v_cost_IdTab_itab
FROM TABLE(p_Cost_typ.SNR_tab) SNRCT,
TABLE(SNRCT.Kost_tab) Kost
FOR v_i IN 1 .. v_cost_IdTab_itab.COUNT LOOP
FOR v_j IN 1 .. v_cost_IdTab_itab(v_i).COUNT LOOP
DELETE FROM CMG_Cost_v WHERE CMKostId = v_cost_IdTab_itab(v_i)(v_j);
END LOOP;
END LOOP;
END;
===================================================Thanks for your reply. I tried with INDEX by NUMBER. but oracle says its not a valid use of index by thing. and moreover I also tried with by removing INDEX BY clause. but in that case we are not at all getting any data in for loop. some people says to use extend clause. But again I am not sure How to do so. Can you please let me know code for this.
I know you are trying to help by you need to STOP telling us what problem you have and SHOW US. Saying 'Oracle says' is useless. Post EXACTLY what code you are using, the EXACT steps you are using to compile that code and the EXACT result that you are getting.
You also made no comment about the 'overflow' issue. A BINARY_INTEGER (PLS_INTEGER) has a very large range of values:
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/datatypes.htm#i10726
>
The PLS_INTEGER data type stores signed integers in the range -2,147,483,648 through 2,147,483,647, represented in 32 bits.
>
If you are trying to create a collection of more than 2 BILLION of anything you have a serious problem with either WHAT you are trying to do or HOW you are trying to do it. Your 'overflow' issue is more likely a symptom that you are really running out of memory. You should ALWAYS have a LIMIT clause when you do BULK COLLECT statements.
Also see this section in that doc: SIMPLE_INTEGER Subtype of PLS_INTEGER
You need to address your LIMIT issue first and then address any other issues that arise from actually executing the code.
Then see the section 'SELECT INTO Statement with BULK COLLECT Clause' in that doc
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/tuning.htm#BABEIACI
That section has an example that shows you do NOT need to use an INDEX BY clause to create collections as you are trying to do. So your not 'getting any data in for loop' is NOT related to the lack of that clause.
That example also shows you that you do NOT use 'extends' when doing BULK COLLECT. The bulk collection automatically extends the collection as needed to hold the entire results (assuming you don't run out of memory for 2 BILLION things).
Example 12-22 in that same doc shows the proper way to use a double loop and a BULK COLLECT with a LIMIT clause
http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/tuning.htm#BABCCJCB
Here is very simple sample code you can use in the SCOTT schema to understand how the double loop and LIMIT clauses work together.
>
The FETCH does a BULK COLLECT of all data into 'v'. It will either get all the data or none if there isn't any.
The LOOP construct would be used when you have a LIMIT clause so that Oracle would 'loop' back to
get the next set of records. Run this example in the SCOTT schema and you will see how the LIMIT clause works.
I have 14 records in my EMP table.
DECLARE
CURSOR c1 IS (SELECT * FROM emp);
TYPE typ_tbl IS TABLE OF c1%rowtype;
v typ_tbl;
BEGIN
OPEN c1;
LOOP --Loop added
FETCH c1 BULK COLLECT INTO v LIMIT 3; -- process 3 records at a time
-- process the first 3 max records
DBMS_OUTPUT.PUT_LINE('Processing ' || v.COUNT || ' records.');
FOR i IN v.first..v.last LOOP
DBMS_OUTPUT.PUT_LINE(v(i).empno);
END LOOP;
EXIT WHEN c1%NOTFOUND;
END LOOP;
DBMS_OUTPUT.PUT_LINE('All done');
END;
In the FOR loop you would do any processing of the nested table you want to do
and could use a FORALL to do an INSERT into another table.
>
I strongly suggest that you modify your code to work with a VERY SMALL set of data until it works properly. Then expand it to work with all of the data needed, preferably by using an appropriate LIMIT clause of no more than 1000. -
Function - numeric Overflow error
Dear All,
I have a function that is causing a ORA-01426: numeric overflow error
My values from the variables are as follows
v_highest_Uprn is 10033233499
v_start_uprn is 10033223500
Any ideas how to fix this. Thanks in advance.
FUNCTION get_next_uprn RETURN NUMBRT IS
/* Loop through numbers betweeen the next_uprn and the highest in the active range. */
/* Check to see if the new uprn exists in the database , if no rows returns then return the new uprn. */
v_start_uprn NUMBER;
v_highest_uprn NUMBER;
v_uprn_exists NUMBER;
v_new_uprn NUMBER;
BEGIN
SELECT next_uprn ,
highest_uprn
INTO v_start_uprn,v_highest_uprn
FROM PD_PROPERTY_NUMBERS
WHERE active_sequence = '*';
v_new_uprn :=v_start_uprn ;
FOR rec IN v_start_uprn..v_highest_uprn LOOP
IF v_new_uprn > v_highest_uprn THEN
Bs7666_Standard.bs7666_error(35635);
END IF;
SELECT uprn INTO v_uprn_exists
FROM PD_BLPUS
WHERE uprn = v_new_uprn;
v_new_uprn := v_new_uprn + 1;
END LOOP;
RETURN v_new_uprn;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN v_new_uprn;
END get_next_uprn;Hi
The loop control variable in a FOR loop is an integer (or similar) it seems; those numbers are simply too big for it.
Change your code to something like:
FOR rec IN 1 .. v_highest_uprn - v_start_uprn + 1 LOOP
Luis -
hi
when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
i use the windows 7Zohre
What version of the CAD software are you trying to install? Is it compatible with win 7? Older installations (on older OS) installed to a different default location that win 7 does not have.
Wanikiya and Dyami--Team Zigzag -
Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.good
-
RoboHelp 10 Compile Error: Cannot find xml definition file Template Error
Does anyone know how to resolve this error? I'm exhausted googling.
I generated Webhelp and got the error below. When I View the Help, nothing displays; IE browser does not open the Help.
Initializing compiler...
Generating WebHelp 5.50 (10.0.0.287)...
Error: Cannot find xml definition file C:\Program Files (x86)\Adobe\Adobe RoboHelp 10\RoboHTML\webhelp5Ext\template_skin\webhelp5skin.xml.
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.dhtml
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.list
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.toolbar
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.minibar
Template Error: can not resolve macro: WT_DS_TOC_ICON_PAGE_REMOTE
Template Error: can not resolve macro: WEBHELP_TEMPLATE.topic
Template Error: can not resolve macro: WEBHELP_TEMPLATE.frame
Processing TOC data...
Processing Glossary data...
Processing Context-sensitive-Help data...
Updating HTML topics...
Finished updating HTML topics in 5 sec(s) : total 431 topic(s).
Processing Full-text-search data...
Finished processing Full-Text-Search data in 41 sec(s)
Applying WebHelp 5.50 Template...
..........................Template Error: can not resolve macro: WT_DS_SEARCHFORM_GO in C:\FuelsManager Primus\Web Application\Projects\FMHelp\Cirrus\whfform.htm
Error: Fail to update Template file whskin_frmset010.htm
Error: Fail to update Template file whskin_frmset01.htm
Error: Fail to update Template file whskin_frmset0.htm
Finished applying Template in 10 sec(s)
Finished compiling WebHelp in 107 sec(s)
Compilation complete.Why Robo 8 would remove RH10 files is beyond me.
A reinstall of RH is sure to fix it. But if you PM me your email
address, I can send you a copy of the file (might save you a reinstall).
Kind regards,
Willam -
Windows cannot find ...wmplayer.ext error with CS5 and Win7x64
I have the Master Collection installed on a Z800 dual quad core with 36 GB of RAM with a Quadro 3800 and everything runs in Master Collection fairly well so far, but when I am in bridge trying to play AVCHD files either from my Canon HF30 or my HMC150 through Bridge (CS5), I recieve a Windows dialouge box that states
'Windows cannot find "%Program Files(x86)%\Windows Media Player\wmplayer.exe' Make sure you typed the name correctly, and then try again.
Any ideas? I can navigate to where the video's are from in Windows explorere and when I double click on them they play just fine in WMP.
Any help woudl be appreciated.I'll try renaming a file to .mts and see how it responds. Thanks.
The interesting thing here is that some Adobe products support AVCHD files while others don't. I have Premiere Elements 8.0 on my laptop. Premiere Elements includes a file manager called Organizer which functions like Bridge; that is to say, it is used to preview, rank and overall, manage media assets. My .m2ts files both preview and play perfectly in Adobe's Organizer. I have spent weeks talking to Adobe's technical support staff and have been passed to more than 20 different people. None of the support staff seem to understand this issue. They surely don't have a look at these forums, unfortunately. They closed my case without a solution.
I've considered installing Premiere Elements on my desktop PC solely to have a functioning file asset manager, but I don't know if it would result in conflicts or other problems.
Thanks for your response. It's worth a try for sure.
Maybe you are looking for
-
Work Center update during work order save (SAP PM) using exit IWO10009
Hi All, I am updating the work center in the operation record of a work order using exit IWO1009. In the debug, the internal table for operation is updated successfully. But once the processing is done and I see the order though t-code IW33, I couldn
-
How do I call another exe file from a Java program?
Hi, I am doing a simple IDE (text editor/interpreter) for a simple programming language we are developing. It will be submitted as our project for this semester. I created an exe file (in C) which will be used as the interpreter. How do I call the in
-
Hi please can someone help me for this algorithm. The problem is the classic graph coloring with the condition: two adjacent nodes do not have the same color and any vertix has a list of admitted colors. thanks a lot
-
Is Adding a Sound at the Very End Possible?
Hi, I was just wondering, for the last slide of my presentation, I have an audio effect that I would like to have keep going even though the slide has transitioned out. Is this possible?
-
Can I use older brushes in AI CS5.1?
Hey all--There are scads of free brushes out there, but some of them are pretty old. Can I use brushes created for CS3 or CS4 (and CS5 and maybe as old as CS2) with AI CS5.1? Thanks. --d