CR XI R2: Salesforce 3.0 driver on Windows 7 64-bit?

Hello. I have CR XI r2 SP6 with the Salesforce 3.0 driver running on Windows 7 64-bit. When I try to connect to Salesforce, I get an error message "Invalid argument provided. java server setup failure. Please verify the PATH etc etc etc. Please verify you are using JDK 1.4"
Is there a newer version of the Salesforce driver? Anyone know if these paths can be pointed to a newer version of the JDK?
Thanks
David

Hi David,
Crystal does have a dependency on the JDK 1.4 and it should have installed when you installed Crystal Reports.
You did not say if you have any JDK's installed and what that version is?
Have a look at this link also and possibly post your question in that forum too:
How to enable support for Salesforce.com API v13 in Crystal Reports
Thank you
Don

Similar Messages

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

HP Photosmart 325 driver for Windows 7, 64 bit

I cannot find a driver for Windows 7, 64 bit to run the Photosmart 325 printer. Does one exist? Is there a work around? (The driver for Windows 7, 32 bit does not work)

Use the Photosmart 320 series driver available through Windows Update.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

X301 and Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)

Ok, I (Lenovo) did it again.
System Update showed me this update: "Vodafone and AT&T Wireless WAN (HSPA) Driver for Windows 7 (32-bit, 64-bit)".
As I'm using Vodafone and I had a AT&T driver, I decided to update.
The result is, that now the GPS doesn't work.
Yes, I'm in a place where the GPS signal is present (my house, with the previous driver I was able to get 6/7 satellites).
What happens? Lenovo TV GPS stays there trying to fix the satellites, but nothing happens. I can't recover the system to a previous state, as I updated Flash player too, and Windows only show me the possibility to roll back this update.
So, apart advicing everyone not to update, I kindky ask:
- where can I found the previous driver? I searched the web without success...
- why does Lenovo deploy driver which can cause problems (I just had one updating the BT driver last week! .msi installer problem, error 1935...)?
Thanks to everyone
600, R52, T61p, X301

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Recovery drive corrupted Windows 7 64-bit

Hi all,
My laptop came with recovery drive of Windows 7 64-bit. I once re-installed windows from that recovery drive. Some
time ago I installed some software after that "Windows not genuine" message start appearing. Then I tried to re-install Windows from Recovery Drive. But I come to know that my Recovery Manager is not working (Pressing F-8 while starting system, and
directly starting Recovery Manager from Programs) I have consulted some technical people they says that your recovery drive is corrupted. What should I do now.
Thanks!

Hi all,
My laptop came with recovery drive of Windows 7 64-bit. I once re-installed windows from that recovery drive. Some time ago I
installed some software after that "Windows not genuine" message start appearing. Then I tried to re-install Windows from Recovery Drive. But I come to know that my Recovery Manager is not working (Pressing F-8 while starting system, and directly
starting Recovery Manager from Programs) I have consulted some technical people they says that your recovery drive is corrupted. What should I do now.
Thanks!
Don't turn on your computer anymore.
Take your computer to a professional who can possibly recover whatever data may be recoverable on your hard drive. Tell the professional the software you downloaded that started causing the problem regarding the "Windows not genuine" message appearing
so the professional removes that software from the recovery if they can.
The professional will be able to diagnose what the issue with the harddrive or your computer is. Possibly the hard drive is failed and no data can be recovered from it. Possibly something on the laptops motherboard is bad so the hard drive can not be accessed.
The laptop may need a new hard drive. Which may require the professional to install Windows 64 bit OS on the new harddrive.
Plan to spend money.
May be cheaper to buy new laptop and throw old laptop away.
Don't install that software on your laptop again.
La vida loca

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp pavilion 15-n011tu display driver for windows 7 64 bit

pavilion 15-n011tu display driver for windows 7 64 bit give me the the way from which i am abel to get driver for my pc

Hi:
Download and install this driver...You want the first file listed (.exe).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Grap...

Desskjet 850c driver for windows 7 32 bit

Hello folks
Does anybody have a link for a deskjet 850c driver for windows 7, 32-bit,if there is one out there,I don't really want to replace this printer as it has been excellent!

Hi:
Try the 3rd driver (4th item) on the list at the link below...
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

Can I bring files from a NTFS formatted external hard drive (from Windows XP 32 bit desktop) to my new macbook pro retina?

What are these files you are trying to copy over?
If they are program specific and there is no program on a Mac to read them then you'll have to find either a Mac version of that program or one that does the same thing and can read those files.
The file extension should not change just because you connect a NTFS formatted drive to a Mac computer. A Word Document is still a .doc/.docx ad the same for all other office type programs. Music files with an extension of .MP3, or whatever, should read the same on both system. Same goes for all other files like images with a .JPG extension.
Yes I would network them.
I would not use Migration Assistant. There is nothing on your Windows PC that can be used on the Mac other than your personal data files. No programs or settings can be carried over from Windows to OS X.
marimbapony1 wrote:
Also, when I view the files from the external hard drive, they show up as .nbz and are not recognized by any program on the Mac. Should I just abandon the hard drive option and start sharing files through the LAN approach?

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

Please help me to find.. compaq presario f762au sound driver for window 7 32 bit.

please help me to find.. compaq presario f762au sound driver for window 7 32 bit..
This question was solved.
View Solution.

Hi,
It does not make any sense. Based on its support page, it uses "Conexant HD-Audio SmartAudio 221 Driver" for Vista
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
and now it can't see for Windows 7:
   https://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-75899-1
Please try the following methods:
   http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows
   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Photosmart C4680 driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

C driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

T400s synaptics touchpad driver for windows 7 64 bit

I can't find a driver for:
t400s synaptics touchpad driver for windows 7 64 bit
I looked on the Lenovo site under t400s
Any Help on this? I really like the touchpad but I want to turn off tapping and make some other adjustments.
Thanks,
Bill

I'm sure bananaman meant on the Win7 Beta OS download site.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Greets

CR XI R2: Salesforce 3.0 driver on Windows 7 64-bit?

Similar Messages

Maybe you are looking for