CR2 Files Not Recognized in Photoshop CS5

Hello!
I've been having an issue trying to get a few cr2 files to open in CS5. I have about 800 cr2 files and all will open but about 100. I can't figure out what the issue is with this group of images compared to the rest. They won't open in Bridge or Lightroom 3 either. Any thoughts or ideas on what I could do to remedy this issue?
Thanks for the help! I included a screenprint of the message I receive when trying to open one of the images.
Thanks,
Ashley

Worse that being screwed, is not knowing what is wrong so you can't fix it without guessing any maybe not guessing right. Use a new CF card use a card-reader and maybe the situation won't happen, again, is the best you can do going forward.
As far as what to do for the photos from this set, if the card has not been reused completely, again, then you can try recovering the photos off the card, to see if any photos from the batch that doesn't work, remain, and see if they copy off any better the second time. If they do copy off ok, then there is likely something wrong with the transfer process and less likely that it is the CF card.
The software I've used when I've accidentally deleted photos off the card when I shouldn't have, is PhotoRescue from www.DataRescue.com I have one of the older versions so I'm not sure what it corresponds to with the newer set. It costs money, but you can run a scan of the card, first, to see if it finds thumbnails of the images it is going to recover, but you have to pay before you can actually save off the photos it has found.
If you haven't used the card at all since you discovered the problem, meaning you've merely moved the photos off of it and it is now empty, perhaps even formatted, but no low-level formatted, then you have a good chance of being able to recover most of the photos--basically undelete them. If you've shoot more photos over the top of the deleted ones or low-level formatted the card, the chance is lower than you'll be able to get the photos back.

Similar Messages

.CR2 Files not recognized by Photoshop, Bridge, or iPhoto

I am a photographer shooting in Raw with my Canon Rebel T1i. I used to Import the images into iPhoto for editing and organization. But a few moths ago while importing the images (usually shows a preview of the photos) It just showed black... Then when i tried to edit the photos they wouldn't load. I can see the thumbnails inside of iPhoto but when I go to edit them... they wont load. So I tried to open the images using Bridge&Photoshop... I imported new images from my SD card into Bridge... the thumbnails of the images don't show up. It just shows white with a shutter on it... and it says 'file name'.CR2
When I double click on the images (supposed to open the image in Photoshop RAW ) Photoshop opens, looks like its about to start... then says "photoshop does not recognize this type of file."
Im not sure what to do... I've been looking around on different forums and it looks like I may be missing a Driver or some kind of Plug-in... But i dont know how to find out what Im missing or where to get it... Any help is greatly appreciated. Thanks!

Keith_Reeder wrote:
…or convert its CR2s to DNG using the free Adobe DNG converter.
Keith, Keith, Keith…
What part of not supported don't you understand?
If a camera is not supported by the latest version of ACR, it will not be supported by the free Adobe DNG Converter either.
ACR and the DNG Converter are always released in tandem and they support the same camera models.

Why are my plug-ins not recognized by Photoshop CS5?

Hello,
It seems my plug-ins are not recognized at all by Photoshop CS5:
- Imagenomic
- Photokit Sharpener
- Photomatix
and even the - Optional Plug-ins given by Adobe are not working
I get a panel that says:
"could not complete your request because Photoshop doesn't recognize this type of file"
Am I doing something wrong?
The plug-ins are in:
Applications>Adobe Photoshop CS5>Plug-ins>Automate>PK Sharpener
or
Applications>Adobe Photoshop CS5>Plug-ins>Optional Plug-Ins
or
Applications>Adobe Photoshop CS5>Plug-ins>Imagenomic
or
Applications>Adobe Photoshop CS5>Plug-ins>Filters>Tone Mapping
Thanks for your help!
Emilie

sorry I've found the answer... not running in 32 bits... What a shame...

CR2 files not recognized by CS6 or Bridge

My CS6 and Bridge don't recognize the raw CR2 files from my Canon 5D mark III. Everything is updated, I downloaded the latest plug in, what should my next step be to fix this? Thank you.

What operating system are you running: Win Vista/7/8 OSX 10.7/8/9.x?
You do need ACR 7.1 or higher for the 5D.3, so the issue is to get a newer ACR plug-in installed.
What happens if you do Help / Updates in Photoshop?

Bridge Rotations not Recognized in Photoshop CS5

So i've rotated the images in Bridge...and according to Bridge's metadata the files are being rotated...but when I open them in Photoshop they aren't rotated. Seems as though photoshop isn't recognizing the EXIF data. I'm running it on an iMac and they are both CS5.1. So yeah...if anybody has any suggestions that would be amazing. Thanks!

Worse that being screwed, is not knowing what is wrong so you can't fix it without guessing any maybe not guessing right. Use a new CF card use a card-reader and maybe the situation won't happen, again, is the best you can do going forward.
As far as what to do for the photos from this set, if the card has not been reused completely, again, then you can try recovering the photos off the card, to see if any photos from the batch that doesn't work, remain, and see if they copy off any better the second time. If they do copy off ok, then there is likely something wrong with the transfer process and less likely that it is the CF card.
The software I've used when I've accidentally deleted photos off the card when I shouldn't have, is PhotoRescue from www.DataRescue.com I have one of the older versions so I'm not sure what it corresponds to with the newer set. It costs money, but you can run a scan of the card, first, to see if it finds thumbnails of the images it is going to recover, but you have to pay before you can actually save off the photos it has found.
If you haven't used the card at all since you discovered the problem, meaning you've merely moved the photos off of it and it is now empty, perhaps even formatted, but no low-level formatted, then you have a good chance of being able to recover most of the photos--basically undelete them. If you've shoot more photos over the top of the deleted ones or low-level formatted the card, the chance is lower than you'll be able to get the photos back.

Cannot open CR2 files from T5i in Photoshop CS5.5

I have talked with Apple. These files can be brought in to iphoto and then exported. This is not what I want to do. I want to open in Camera Raw. Is there a workaround with a converter for CS5.5? I see there is Camera Raw 8.1 available. From what I have read, it is only for CS6 or CC - forcing me to upgrade? Then, according to some posts, the Camera Raw update 8.1 is buggy and does not work as well as previous versions. Can somebody shed some light on this for me? I really don't want to re-iinstall, uninstall, flush cache, look for fixes, etc, etc.
Is there a converter or plugin that works with CS5.5? my original question.
thank you

Your Canon T5i requires ACR 7.4 which is only available for CS6
You can download the latest version of DNG - Digital Negative Converter 8.1 which can convert files from newer cameras to DNGs that can then be opened in PS CS5.5
Make sure you get the DNG converter 8.1 NOT the ACR 8.1
This is a stand alone application, so you need to start it and then point it to a FOLDER that contains your files.
It works on folders. It does not convert individual files.
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5596
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5597

New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

New Nikon Df camera RAW files not recognized in Bridge and Photoshop. Is there a fix? Surely Adobe make a mistake and not keep up with Nikon.

I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
Would post in ACR forum and see if they know anything more. http://forums.adobe.com/community/cameraraw

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Libc.so: file not recognized: File format not recognized

Hi,
While running the "cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install"
i am getting the error.
[appldev@datadev lib]$ cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
rm -f de60desm /appldev/devora/iAS/6iserver/bin/de60desm
- Linking de60desm executable...
gcc -o de60desm -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib//stubs/ \
/appldev/devora/iAS/6iserver/procbuilder60/lib/detk2.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demsr.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demcl.o \
/appldev/devora/iAS/6iserver/procbuilder60/lib/ui10.o /appldev/devora/iAS/6iserver/procbuilder60/lib/uiicxd.o \
/appldev/devora/iAS/6iserver/rdbms/lib/defopt.o -lde60 \
-lca60 -lucol60 \
-lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
-luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /appldev/devora/iAS/6iserver/lib/libpsd.a -lplsf -lplsb -lextp \
-lslax /appldev/devora/iAS/6iserver/lib/nautab.o /appldev/devora/iAS/6iserver/lib/naeet.o /appldev/devora/iAS/6iserver/lib/naect.o /appldev/devora/iAS/6iserver/lib/naedhs.o `cat /appldev/devora/iAS/6iserver/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /appldev/devora/iAS/6iserver/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/appldev/devora/iAS/6iserver/lib//stubs//libc.so: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
My OS version is RHEL 5.
Please suggest.
Thanks in advance.

But We are facing another issue while running "cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install"
[appldev@datadev lib]$ export LD_LIBRARY_PATH=/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads/
[appldev@datadev lib]$ cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install
Last few lines Error:
ld -shared -o rwows60.so -z text -G -export-dynamic -L/appldev/devora/8.0.6/lib/ -L/appldev/devora/8.0.6/network/jre11/lib/linux/native_threads -L/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads /appldev/devora/8.0.6/reports60/lib/rxmawt.o /appldev/devora/8.0.6/reports60/lib/rwsows3.o /appldev/devora/8.0.6/reports60/lib/rwswif.o /appldev/devora/8.0.6/reports60/lib/rwswcj.o /appldev/devora/8.0.6/reports60/lib/rwswcs.o /appldev/devora/8.0.6/reports60/lib/rwswm.o /appldev/devora/8.0.6/reports60/lib/rwsws.o /appldev/devora/8.0.6/reports60/lib/rwswcm.o /appldev/devora/8.0.6/reports60/lib/rwswk.o /appldev/devora/8.0.6/reports60/lib/rwswu.o /appldev/devora/8.0.6/reports60/lib/rwswur.o /appldev/devora/8.0.6/reports60/lib/rwswx.o -lzrc60 -lca60 /appldev/devora/8.0.6/lib/nautab.o /appldev/devora/8.0.6/lib/naeet.o /appldev/devora/8.0.6/lib/naect.o /appldev/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -lc
/usr/lib/libc.so: file not recognized: File format not recognized
make: *** [rwows60.so] Error 1
Kindly suggest..What is the document/step you are following?
Thanks,
Hussein

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

How do I Make cr2 files to jpeg in photoshop elements 10? [was:files]

How do I Make cr2 files to jpeg in photoshop elements 10? And why are my raw photos looking really pixilated?

mgills2013 wrote:
What is the difference between mRaw and sRaw?
http://cpn.canon-europe.com/content/education/infobank/image_compression/file_types_raw_sr aw_and_jpeg.do

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

Can an InDesign page be saved as a jpg file for use in Photoshop CS5 ?

mckayk_777 wrote:
Just wondering peter what you think, instead of output to pdf you copy and then create create new file in photoshop and paste into that file. Is that sort of the same thing?
Seems to be ok especially if you enlarge the object before you copy it into photoshop.
I think what you are pasting (never bothered to try this) is just the screen preview, hence the need to enlarge. Why would you waste your time doing that instead of exporting to a high-res PDF?
If you want only part of the page, check out http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php

Mp3-file not recognized on my Samsung SGH-E720 mobile phone

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

hey,
i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
grtz
imac g5 17" Mac OS X (10.4.8) broken for the moment ...

Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

CR2 Files Not Recognized in Photoshop CS5

Similar Messages

Maybe you are looking for