Cr2 files will not open in cs6

I am running os10.6.8 and recently upgraged to cs6 from cs5. I have checked for software updates and my version is current. when I (attempt) to view in bridge or try and open cr2 files in the latest photoshop it will not allow. I can only see the cr2 icon but no image. HOWEVER - I can view/open the files in my previous photoshop version (5) with no problem. I have seen reference to 'patches' without explanation as to how/when those are needed or is this the same as a latest software update? if so, patches sounds alot like a jankey duct tape and twine solution - just friken use the word SOFTWARE UPDATE - I think that is pretty clear.
Secondary question - I did a 30 minute search on this discussion board and found nothing. I don't understand how that can be, as I am sure this is a common problem.
stanks!
johnyboy

http://labs.adobe.com/downloads/cameraraw7-4.html
FYI, Camera Raw versions and supported camera makes/models are listed here:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The Canon 5D MkIII was first supported in Camera Raw 4.1 *.
* My error (as correctly pointed out by Noel in post #6): Camera Raw 7.1 (Lightroom 4.1)
(@Noel: no confusion on the 5D Mk III (it's my dream camera, one day) - just quoted the wrong column on the supported cameras page :-)

Similar Messages

"Recovered" CR2 files will not open in Photoshop CS6

My son recently completed the National Three Peaks Challenge. Regrettably, having taken loads of pictures, he discovered that one of the CF cards was corrupt. He and his fellow climbers have now paid a company (a considerable sum) to recover these photos and they are all showing as CR2 files. Unfortunately, neither Photoshop or any other program that he has (including Preview) will not open them. The images from the uncorrupted files are fine.
As you can imagine, he is desperate to get these images back so if anyone has any bright ideas as to where we go from here we would really appreciate it. Thanks in anticipation.

Thanks for your suggestion, normfb, which I passed on to my son. He has come back with the following answer -
"Tried the DNG converter, didn't even recognise there was a file in the folder I told it to look in!
The issue is that no programs be it Photoshop, that DNG converter, Lightroom or Preview are able to recognise that file format."
Appreciate the idea though.

CR2 files will not open in CS4 or Bridge.

I can not open CR2 file in CS4 or Bridge. The CR2 images show in the preview window when I click the "open" button under "file". When I select the image to open I get "Unable to complete your request because it is not the right kind of document." I have uninstalled and re-installed the sotware, installed all the updates and get the same results. Any sugestions?

dans2art wrote:
I can not open CR2 file
From which Canon camera model exactly?
The CR2 file is probably from a newer camera and probably requires Camera Raw 6 or higher.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS4 is only compatible with Camera Raw up to version 5.7
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
You either have to upgrade Photoshop to version CS6 or higher
Or convert the CR2 file to DNG using the free DNG converter then edit the DNG files in CS4.
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Some Canon CR2 RAW Files Will Not Open In Elements 8

I use a Canon 7D DSLR. Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
Some files still open others do not. I can think of only one thing. I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
Any ideas why this would happen? I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
I appreciate any guidance in this matter. Needless to say I am resetting my camera back to Large RAW files only.
Alex

ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
http://www.adobe.com/downloads/updates/
sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
Here is technical information on the reduce-sized RAWs:
http://lclevy.free.fr/cr2/#sraw

Mov file will not open on Premiere CS6 for Windows

I am a student working on a project that I started in university on an Apple Mac desktop. I decided to carry my project back home to continue with it on a laptop which is Windows...however the Mov. files will not open up on premeire pro and it is really frustrating as I have done a lot of work. How can I import these videos without losing any work or having to start again?

Quicktime X does NOT work http://forums.adobe.com/thread/888722
-Premiere Pro REQUIRES Quicktime 7 won't work with Quicktime X

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

PDF files will not open in a Safari (v 6.0.5) browser window

PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
Adobe Reader version 11.0.04 is now working for me.
Thanks for the help and the solution C.F.McBlob

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

A Pages file will not open due to index.xml not found, what is up with that?

I recently saved a file on Pages 5.5.2. on my IMac hard drive. Now I find that on attempting to open it the file will not open due to index.xml not found. Hoe do I correct this?

I have this issue, as well - although perhaps in a different content. When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message. I am very concerned that I may lose access to some of these files. The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document). I thought I needed to upgrade the old documents to the new Pages, but this didn't work. Does anyone have any ideas? And, I'm not a techie - so you'll need to break it down for me.

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

My InDesign file will not open! URGENT!

Hi all,
One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
You can embed an image in a post using the coamra icon onthe web page, like this:

Mov reference file will not open in QuickTime 7.7.4 for Windows

Hi,
I have a mov reference file which opened fine in QuickTime 7.6.2 but since upgrading to 7.7.4 the file will no open. I get the following error:
Error -2002: a bad public movie atom was found in the movie.
The file contains one PAL MPEG2 video track and one stereo PCM audio track. It also contains a timecode track.
See movie inspector below:
Can anyone help me understand why this file will not open with the latest version of QuickTime. I cannot supply the file but can give any information about atoms etc. which can be read using QTAtomViewer.
I am using Windows 7 and Windows Server 2008.
Many thanks,
Kate

For those who want to call, the following menu options will get you to the Quick Time install tech support:
2 - takes you to the Quick Time submenu
2 - takes you to tech support
then, choose 1 for Mac or 2 for windows
Initially, I was told by tier 1 tech rep Shawn that the update server may not be up or that it may be a firewall issue on my side.
After telling him that I have confirmed that it is a problem with the update server sending a NULL (0 byte) response to the update query, he said I would have to just download the latest one in order to have the most up-to-date version and "just check back periodically to see if the update server is working".
He mentioned there was a Quick Time standalone download available (http://www.apple.com/quicktime/download/standalone.html), but that is still ~20MB & doesn't help the fact that probably over 90% of the people who run Quick Time have the option to automatically check for updates set and will never realize they're running an old, vulnerable version of Quick Time.
He gave me a case number after I asked for one: 58027568
If you'd like to add to mine and/or Rob's, it surely couldn't hurt.
I suppose my next course is to try emailing contacts at apple to see what kind of response they have. Considering this problem has been there ever since QT 7 for Windows has been released (I don't remember ever checking for updates when running QT 7 beta), it's strange that it's still a problem.
hand made system Windows XP Pro

Cr2 files will not open in cs6

Similar Messages

Maybe you are looking for