Cr2 files won't open I have PS CC and the latest CR update available.

I have a Canon Rebel XS, a fairly old camera.
It writes a cr2 file and PS won't open it.
PS shows a link tat says update CR and I have the latest update available.
Running PS CC and have the latest update.
MBP OS 10.9.3 with the latest CR update.
Does anyone have an answer for this prob?
Thanks in advance!
R

cr2 files won't open I have PS CC and the latest CR update available.
I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
Can anyone open it with DNG converter or Photoshop?
Neither of them work on mine.

Similar Messages

.CR2 files won't open in Photoshop CS4

I recently got CS4 Extended version of Photoshop and need to work on my RAW files, but they won't open. I can see the thumbnails in Bridge and when I try to open them Photoshop says they're "not the right type of document"...so...not sure what to do. I've done a ton of research and cannot figure out why these files are unable to open. I need help!

I've had the same problem recently and worked on the solution this morning. I havn't read the full info stream here, but can tell you what finally worked for me today.
I also have CS4, and recently bought a Canon 7D. My .CR2 files would not open, due to proprietay issues with the new camera.
I first had to buy a download of WinZip, since I wasn't able to open any download from Adobe. The WinZip was about $30. Next, I went back to Adobe/downloads/updates and used Find Product Updates menu. I found the compatable update of RAW plug in was 5.7 for our CS4 version. I clicked the link to this download, and began the process by clicking Save. I then went to the Download folder and found the file from Adobe in the WinZip folder. At this point I went back to the Adobe download site and printed out the download instructions concerning where to find the old plug in, what to do with it, and how to install the newer downloaded plug in.
After all this, I opened CS4, Bridge, located my first .CR2 file, and it worked just fine. I was also able to convert these .CR2 files, once opened, to DNG files.
Hope this helps.

My apple tv seems to have hung up during the latest software update - what should I do now?

my apple tv seems to have hung up during the latest software update - what should I do now?
I have not turned it off but it has been stuck in the same spot for 30 minutes now and I'm not sure what to do next since the screen says to NOT turn it off until done. Please help.

If it hangs much longer you may need to disconnect and then grab a micro USB to restore through iTunes
http://support.apple.com/kb/HT4367

TS3694 I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please

I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

HT4191 I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before.

I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before. Can anyone help?

Click on calendars at the bottom of the screen. Make sure that birthdays are checked.
We may think we have 1 calendar, but iPhone puts things in different calendars. Sometimes we can somehow lose one. Well not really lost, but somehow it just gets de-selected. So just make sure that all that you want to see are checked.
One cool thing I like about this is that they have added US Holidays which didn't used to be there like on most paper calendars. Nice to have them available now!

Cannon Rebel XS EOS CR2 files won't open in CS6

My photoshop is completely up to date, my RAW plug-in is up to date, and I even attempted to download the DNG converter all to no avail. No matter what I try my CR2 images won't open in anything. My camera is listed as one of the supported cameras. I've tried everything I could find on the forums and on other searches but still cannot get my files to open in Photoshop. The worst part is that they were opening last week prior to my updating. Are there any suggestions as to what I can do to get this solved?

If you have CS2 the latest version should be ACR 3.7.
ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

CR2 files won't open in Photoshop CS2

I have a Canon Digital Rebel XT and my Photoshop CS2 software won't open these images. CR2 is listed in the Raw file format but selecting Raw doesn't open them. I have downloaded the latest Raw update. I am using windows. Can anyone help me??? Many thanks, Patricia

If you have CS2 the latest version should be ACR 3.7.
ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

HT1277 I cannot open the new email icon for 10.6.8 and the latest secrtoy update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help

I cannot open the new email icon for 10.6.8 including the latest security update. My old "Stamp" icon email won't let me in either indicating that the new OS version doesn't work. Please help. I have spend over 4 hours installing and reinstalling updates, etc. and I don't know where to go from here.....

Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
Fellow user Grant Bennet-Alder offers this solution:
Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
When the Security Update is done, the old version of Mail is disabled.
The solution has been to:
1) make certain Mail is in the /Applications folder
2) There is no other copy anywhere else.
3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
Security Update 2012-004 (Snow Leopard)
If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
Mac OS X 10.6.8 Update Combo v1.1

CR2 Files Won't Open In Photoshop CS5 - Camera RAW Updates Won't Install...

I've had to take some photo editing work home from the office and I need to open some CR2 (RAW) files on Photoshop CS5. When I drag the files into the program I get a notice that my Camera RAW does not support the files.
I've tried downloading updates for Camera RAW, all the way back to 6.3 (I'm currently using 6.0), but when I go to install I keep getting the message "Some Updates Failed to Install" "Update is Not Applicapable".
The photos were shot on a Canon 5D Mark II, not that it should make much of a difference. I'm wondering what's going wrong? I'm running OS 10.5.8 at home and I'm wondering if that has something to do with it. Any help or suggestions would be greatly appreciated!
Thanks!

If you have CS2 the latest version should be ACR 3.7.
ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

Recovered CR2 files won't open with CS3

Hey, I need help with this!
I worked in a photoshoot with a Canon EOS Rebel XSi and SD memory; then I had troubles trying to download them because the memory wouldn't let me do it, so I used the 'PC Inspector Smart Recovery' and I recovered all my CR2 files indeed. BUT! some of them won't open with Photoshop CS3, most of them do, but there's just some others that won't open and I really need to get this job done
My camera files always worked perfectly with photoshop CS3, plugins are installed, I really don't know what went wrong.

I am having a similar problem. I downloaded CR2 files from my camera to my computer and CS3 Bridge will not recognize the files, allow me to open in Camera Raw or open in CS3 Photoshop. I also stuck the same memory card in a Lexar mem card reader and attempted to download to my Mac in CS4 Bridge and that version of Photoshop and Bridge won't recognize the files either, however the CR2 files do appear, where I can view the thumbnails, in iPhoto. All original files are still on the memory cards (4 cards worth of wedding photos!). I've downloaded Camera Raw updates for both cs3 and cs4 on my windows pc and my mac and still no luck. I'm at my witts end! Help!

CR2 files won't open

I have CS3 on Windows 7, and a canon 6d. I cannot open my CR2 files. Every time I try it says that it can't open because it's not the right type of document. Please help. I fear that I will need to buy a newer version of photoshop, but it would shock me if I couldn't just update it somehow. Thanks.

Hi,
Unfortunatly photoshop cs3 can't use the camera raw plugin required for the canon 6D camera raw files.
(requires camera raw 7.3 and photoshop cs3 only can go to camera raw 4.6)
Besides upgrading to photoshop cs6 you could use the 7.3 DNG Converter to convert your 6d files to dng copies which photoshop cs3 should open
or consider lightroom, which is cheaper than photoshop cs6.
7.3 DNG Converter:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519

.CR2 files won't open in CS3 on a new WIN7 'puter

I just got a new 'puter with WIN7 installed. I installed CS3 and updated ACR to 4.6, (removed the old .8bi, (or whatever it was), file first). I am shooting a Canon 40D BTW...
I still can't open .CR2 files - I ge something like: "could not complete your request as it is not the right kind of document". They will not open in Bridge or CS3.
My discussion with tech support left me with "Bridge can't open .CR2 files..."
My next step, unless someone here can offer something easier/better, is to uninstall CS3 and reinstall.
Thanx,
Ron

Do you see Camera Raw listed correctly in Photoshop > Help > About Plug-in?
Don't re-install until you've tried resetting all three sets of preferences and purged the Bridge cache.

.CR2 files won't open with Elements 9 plug in

I get the following error message when I try to open .CR2 files: "Unable to use the Camera Raw plug-in. It is not compatible with this version of Photoshop Elements".
I'm using PSE 9.0.3 with Camera Raw 6.5 plug-in installed on Win7 32bit PC. The photos were taken with a Canon Rebel T3i which is on the compatibility list. The camera was just purchased in January and this is the first time I've tried to open RAW. I used the update inside Elements to make sure I had the most recent version of Elements and the plug-in. Can anyone tell me what I'm missing?
Kaye

The 6.4.1 installer download seems to be the correct one. I was asking about the 6.5 installer, since that is the one that seems to be in place when you get the error message, whether it was the PS version and somehow PSE knows.
After your 6.4.1 install fails you might run the Adobe Support Analyzer to see if it finds any troubles:
http://www.adobe.com/support/loganalyzer/
You can try to search your entire hard-drive for Camera Raw.8bi and find all such files to see if they are all the same size and date or if some are older or newer, and post what you find, where.
Some of these files may be under hidden folders so you may need to go into your Explorer / Tools / Folder Options / View tab and enable Show hidden files folder a drives.

Firefox will not open Adobe PDF files on my mini Mac (I have reader x and the latest Quicktime versions)

When I try to download a pdf file sometimes an error message appears and states can't down load file, Quicktime may need an extension. Other times the page just stays blank - nothing happens.
This happens very frequently. I can open some pdf files in Firefox. The problem appears with downloading.
I have the same software in Safari and Firefox and I do not have this problem with Safari - I can download PDFs in that browser

What I did was to reinstall/upgrade Adobe Reader, then there is an new option showing up in Firefox > options > applications > Portable Document Format(PDF), which is "use adobe acrobat in Firefox". Choose this one, then I managed again to open PDF files with Adobe Reader internally in Firefox.

HT1222 I have Windows 7. The latest iTunes update messed it up. I tried to uninstall and reinstall iTunes. Now, it won't reinstall (64-bit). Error pops up: missing MSVCR80.dll. Any suggestions? Thanks.

At the last iTunes update about a week or so ago, my iTunes quit working. I do not remember the error at the time. I unistalled iTunes and attempted to reinstall. About 95% in the installation, there is an error. I cannot get by it. If I choose to "ignore" the issue, it says iTunes is installed. However, when I try to open iTunes the error: "The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I've tried this multiple times with no success. Any suggestions? Thank you.
Kel
I have a Toshiba Satelite laptop. Windows 7. Need iTunes 64-bit.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99791)

Cr2 files won't open I have PS CC and the latest CR update available.

Similar Messages

Maybe you are looking for