CR2-RAW files & Elements 7

I have Elements 7 (not premium) and cannot bring up Canon's CR2-RAW files for post processing. I read where there is an update but the threads that start to take me in the direction of update for it specify for "Premium" version of Elements. Can anyone help or give me advice. Perhaps if buying Elements 10 assures me that CR2 files will work it may be worth buying. Open to opinions. I have a Canon T2i camera.
Thanks
James.

Just spotted you use a T2i
That camera needs at least ACR 5.7 or 6.1 both of which can not be installed in PSE 7.
You would need PSE 8 or later or you could download the free DNG converter. The converter will take your CR2 files and convert them to DNG raw files which can be read by PSE 7.
Brian

Similar Messages

  • Some Canon CR2 RAW Files Will Not Open In Elements 8

    I use a Canon 7D DSLR.  Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
    Some files still open others do not.  I can think of only one thing.  I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
    The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
    Any ideas why this would happen?  I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
    I appreciate any guidance in this matter.  Needless to say I am resetting my camera back to Large RAW files only.
    Alex

    ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
    http://www.adobe.com/downloads/updates/
    sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
    Here is technical information on the reduce-sized RAWs:
    http://lclevy.free.fr/cr2/#sraw

  • Why aren't my .CR2 RAW files opening in Elements 9.0 from my Canon Mark III 5D?

    I am super confused as to why my old Canon Rebel CR2 (RAW) files have always opened in Elements 9.0, but now my new camera (Canon Mark III 5D)'s RAW files are not opening? Thanks!

    You have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Why can't I download Canon S100 CR2 RAW files into PSE 10?

    I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
    When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages:  Nothing imported...files are not supported file types or alread in catalog.  File damaged or in a format that cannot be included in the Elements Organizer.
    These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

    Thank you for the info. It worked great, once I was
    able to get around a second problem that prevented updating
    from within the PSE 10 application (error U41M1C212). That
    problem was solved by disabling the MS Virtual WiFi Miniport
    Adapter (located in the Network and Sharing Center control
    panel). It just goes to show me once again, how complex
    computer apps are and how much we all have to rely on each
    other to get anything to work properly (frustratingly
    enough, since the companies we paid good money to for
    their problematic software are not very helpful). Thanks
    again.
                Re: Why can't I download Canon S100 CR2 RAW files into
    PSE 10?
                created by 99jon in Photoshop Elements - View the full discussion
    Try opening a CR2 directly from a folder by right-clicking
    and choosing open with Photoshop Elements editor, if that
    dosent work, update the appliactaion (required for the
    S100V)
    In the Editor menu click Help >> Updates
    Then install amera raw 6.7
                Replies to this
    message go to everyone subscribed to this thread, not directly
    to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    http://forums.adobe.com/message/4602882#4602882
                To unsubscribe from
    this thread, please visit the message page at
    http://forums.adobe.com/message/4602882#4602882. In the
    Actions box on the right, click the Stop Email
    Notifications link.
                Start a new discussion
    in Photoshop Elements by email or at Adobe Forums
                For more information
    about maintaining your forum email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • When I open CR2 RAW files from Powershot G10 they are in black and white. How do I get colour

    I'm using Elements 13 on a PC running Windows 8.1. Each time I open a CR2 RAW file from a Canon Powershot G10 it displays in black and white. The image transferred to Elements is still in black and white. Why can I not see the image in colour?

    Try holding down your Alt or Option key. The Cancel button in the Raw dialog will change to Reset.
    Click on that Reset, and hopefully it goes back to defaults.
    Gene

  • Photoshop corrupting CR2 RAW files

    I opened about 80 CR2 RAW files in Photoshop to preview, tweak a few, and export as PSDs. Clicking the down arrow to see each pic, three different times I got the twirling beachball. After waiting a while I force quit PS and when I opened them again the file that was twirling became un-readable. PS says "File format module cannot parse the file." What gives? I've never seen this before on other versions of PS. I'm on Lion and am running the trial of Design Premium.

    Mr D\'Errico, I think that we misunderstood each other. You are more than welcome to share your experience here. I am and have been moderator on several forums online, but, as you might have read from other's comments, I am not known to be confrontational, au contraire...
    Sorry if you tool offense, I did indeed mistakenly believe you had similar issues than the OP, when you were in fact sharing previous experience.
    But, I really did not mean anything bad, and am flabbergasted to the extend on which you took my posts as being confrontational, as they were intended as being helpful, as most of my posts are!
    I genuinely tried to explain the reasoning of my mention of the Elements forum, in my second post, by explaining that several Elements users seeking for help arrive here, and we usually redirect them where users with more experience with that product hang out. I did not mean at all to wave you off of this place, as, everybody is welcome to hang out everywhere they want in the forums, share experience/knowledge, like you did in your first post; I just tried to explain why I made the elements forum notice in the first place.
    As for my remark about optical disks, sorry, but I will stand on it: (besides my typo :"small" when I meant "slow" ): it would be quite slow to read them directly in ACR, or to write the XMP (if writing is allowed) compared to reading/writing them from the Hard drive, especially, as you mention rightfully,  when some optical drives can have issues, thanks again for reporting it.
    Now, can we please get back to the problem at hand? If you want, you can contact me by private message, I'd really want to settle this misunderstanding. I'll stop the coffee if you do, ok?
    Thanks for the vote of confidence, Noel, Dag, Trevor and Jeff!

  • Cannot open CR2 RAW files in Photoshop

    To support RAW files from my new Canon Powershot G11 I downloaded to Camera RAW plug-in 5_6 dmg from adobe. I manged to be able to view the CR2 RAW files in Bridge. However when trying to open a CR2 RAW file from Bridge into Photoshop I get the following error message:
    "Uanable to use Camera Raw plug-in, it is not compatible with this version of Photoshop (CS3)."
    How do I overcome this problem?

    Jens Erik Ebbesen wrote:
    To support RAW files from my new Canon Powershot G11 I downloaded to Camera RAW plug-in 5_6 dmg from adobe. I manged to be able to view the CR2 RAW files in Bridge. However when trying to open a CR2 RAW file from Bridge into Photoshop I get the following error message:
    "Uanable to use Camera Raw plug-in, it is not compatible with this version of Photoshop (CS3)."
    How do I overcome this problem?
    You have two options with Photoshop.
    Upgrade to CS4 so you can use the latest Adobe Camera Raw plug-in, or use the DNG converter from the Downloads page above to make readable versions of your CR2 files.

  • Unable to open Canon 7D CR2 raw files in Photoshop CS6

    Hi Folks,
    I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file".
    I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.
    Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.
    I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.
    Cannot seem to get past the "Could not complete your request..." error.
    Any ideas?
    Cheers,
    Doug...

    Hi Folks,
    Thanks for your replies and assistance so far, very much appreciated. Its a very frustrating problem... this should be one of those things that just work.
    I have uploaded two sample pics taken with my canon 7d. If you get a chance, could you please try opening these images to see if they work on your machine.
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest1_canon7d.cr2
    http://www.bespoke-gems.com/images/gemstones/misc/rawtest2_canon7d.cr2
    I have tried opening them on both my office and home computer but neither of them work.
    Hmmm... could it have anything to do with the lens (Canon Macro Lens EF  100mm1:2.8 USM)
    Many thanks!

  • How can I batch process CR2 raw files to tif's without losing color adjustments?

    Working in BRidge and Photoshop CS6:
    I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my images and then saving as TIFFs but I am losing all my color correcting? Is there a way to save these out as tiffs as a group and not one at a time? I also might have lost my color correcting when I copies them all to one folder as well...not sure what is happening except now my great product shots look like crap. Please help.

    Simply drag the entire folder through Bridge—or even individual files—the invisible xmp files containing your adjustments will automatically and invisibly travel along with the image files, as long as you do it within Bridge, not through the OS.
    Otherwise, you would need to set your Mac OS to always make invisible files visible, and you don't want that hassle.
    Just use Bridge to move files around or to copy them to a new folder.
    Incidentally, there's a dedicated Adobe Bridge forum:
    http://forums.adobe.com/community/bridge?view=discussions

  • Canon CR2 Raw files won't open in Photoshop CS4

    I'm using a Canon EOS 600D (aka EOS Kiss X5), Photoshop CS4 (ver 11.0.1) with Camera Raw 5.7.0.213.
    CR2 Raw files won't open in Photoshop, though the thumbnails are clearly visible and open in Windows Explorer.
    Any suggestions?
    Thanks

    Yes, absolutely all of the quality and dynamic range is retained in the DNG, because it is still raw data.
    Outside of upgrading to Photoshop CS5, which can open your files directly with Camera Raw 6.4.1, your only choice is the extra step of converting the .CR2 files to .DNG with the free DNG converter.
    While you'll get all the quality your Camera Raw 5.x converter can deliver, you should keep in mind the Camera Raw 6.x converter has an entirely new, additional "2010 process" for converting raw images, which (depending on your settings) can actually deliver a higher quality conversion than the one you're getting with Photoshop CS4.  I think it's worth the cost of the Photoshop upgrade, personally.
    -Noel

  • Corrupt CR2 RAW files

    Has anyone found a fix for CR2 RAW files being corrupted? I have read all the thread postings I could google on various forums and can not seem to find any solid fix to the problem.
    I purchased the Canon 400D for my trip to Asia and shot over 1500 photos, almost all in RAW. I transferred 90% of the images onto CDR and DVD media to make more room my Sandisk Extreme III 4gb card. Of the 1500+ photos, 150+ of my images remain corrupted.
    I am posting this in hope that someone has found a fix.
    Hardware:
    Canon 400D Xti Rebel
    Sandisk Extreme III 4gb
    Atech Flash Technology "Pro-Gear" USB 2.0 card reader
    IBM/Lenovo Z60M desktop replacement
    Software:
    Canon's DPP (Digital Photo Professional)
    Microsoft Camera Raw Viewer (does not work with CR2)
    Adobe CS2 with latest upgrades
    I filled my CF card up four times during the duration of my trip.
    Listed in order:
    1 - 6 CDR's
    2 - 1 DVD
    3 - 3 CDR's
    4 - straight transfer from CF card to my Z60m laptop
    Of the four times I DL'ed images, the first 4 CDR's were the only folders that did not carry any corrupted files. All files were DL'ed onto a PC using my Atech card reader locally before burning.
    Of all the images I took, I noticed a total of about 2 to 3 images that are shown to be corrupted when played back on my camera. I reviewed each and every file anywhere between 1 to 5 times on my camera prior to transfer and they all looked fine (maybe the camera plays back the embedded jpegs?). I would delete all images using the in camera function. I formatted the card before each fresh shoot. Originally thinking it was a CD/DVD transfer issue, that would not explain why some images from the last batch off the CF card (straight from CF card to reader to laptop) were also corrupted.
    Here's my workflow (I'm new to RAW): I used Canon's DPP for a day and all the thumbnails displayed perfectly. Like CS2, I believe the software first displays the embedded jpg Thumbnails before loading the actual RAW preview. I did NOT notice any corrupted images based on the rendered thumbnails but I have not verified all my images first before making a strong claim to this.
    I have not installed my copy of CS2 at this point and anxious to use Adobe Bridge, I did so the following day. After playing with some images, I began to notice some weird lost of colors in some of my thumbnail preview images. I attempted to open these files and DPP gave me a corrupt image notification. I tried it in Adobe Bridge and the images opened only to show me that either the image had part of it white, black or various colors. Some images were entirely black.
    On the advice of a forum poster, I used Fastone Image viewer to see if I can save the image as jpegs and it worked but the jpeg was a smaller both in file size and dimension; not a complete lost at least. I did not recall having any image corruption with the exception of about 3 images (at most) which was witnessed on the camera itself during playback which prompted me to think that there was a bad sector on the CF card.
    Notes:
    - One forum poster suggested that Microsoft's RAW viewer were causing problems. Originally, I attempted to open one or two CR2 files and MS RAW viewer launched but gave me errors. I DL'ed the latest version and installed it and it will also not work on CR2's. After reading the MS page on the RAW viewer, it shows that CR2 was not supported yet. I then uninstalled the proggie after reading the posting.
    - Another forum poster suggests that it is a bad card reader. I will attempt to transfer images directly from the camera going forward.
    I'd hate to have this happen again but can not fathom why the problem will not reiterate itself with more RAW transfers going forward. Hopefully, someone has a good solution. Thanks. -Will

    Rita,
    The process for determining what is causing the files to be corrupt can be a tedious one depending on the following:
    1. Can you review the images on your camera's LCD screen without problems? If not then the problem is most probably either a corrupted/faulty memory card or a faulty camera. If this is the case then your best bet at recovery (of sorts) is to use a program such as BrezzeBrowser from BreezeSys to extract the embedded jpeg versions of the corrupted RAW files from within each RAW file. Chances are, you won't manage to actually repair the corrupted RAW file but the jpegs are better than nothing.
    2. If the images review ok on your camera but are corrupted when viewing on your computer and there seems to be no other problem with other files on your computer then it may be either a faulty card reader or usb/firewire cable between the card reader and the computer that is the culprit. Try the card reader with a different cable and also try a different card reader to determine the cause of the corruption.
    3. If your symptoms are that you get different files corrupting over time when viewing them on your computer then the problem may be any one of either failing RAM memory, hard disk, hard disk controller or IDE/SATA hard disk cables. This is where the troubleshooting can be pretty tedious testing then eliminating each item from the list of suspicious pieces of hardware. Try the card and card reader on an altogether different computer to see if the files transfer correctly to that computer. If so then the problem lies with your computer hardware. If you haven't already done so at this stage, backup all your important data immediately (hopefully you keep backs anyway).
    Hope this helps.

  • Is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    The 5D.3 was first supported in ACR 6.7 which you need PSE 10 to use, so there is no plug-in for PSE9 that will allow opening the files from a camera newer than when PSE9 became obsolete.
    Besides getting PSE12, assuming it is supported on your current computer—check the specs, you can use the free DNG Converter available from http://www.adobe.com/downloads/updates.html 
    to convert your CR2 files to DNG files that are compatible with older versions of ACR.  Be sure to set your DNGC compatibility settings to a version old enough to be openable with PSE 10’s ACR.
    As far as whether the OP is serious, it doesn’t hurt to ask the question before spending money on something you didn’t need.

  • Can't view CR2 raw files in Bridge CS6 from Apple laptop pro - why?

    I've got Adobe Bridge CS6 installed on both my desktop and laptop pro.  For some reason I am not able to view the CR2 raw files on the laptop pro.  Does anyone know how to fix this issue?
    Thanks!!

    "CR2" files is meaningless.  You need to specify the exact Canon camera model that generated them.  There are many flavors of CR2 raw files.

  • Preview of CR2 raw files on import window from camera

    Hi
    I have this problem with my Canon XTI. When I connect the camera to the computer and open the import dialog window, I can not see the previews of my CR2 raw files. But if I copy the CR2 files to he hard disk and try tho import from it, then previews are shown on the import window.
    Can anybody help me?

    Probably because the program is trying to write back a marker to the card as it "opens" the images for the preview and the camera won't let it.
    It's not a good idea to import images directly from the camera anyway. Card readers are really cheap - and they WILL let you see the previews.

  • Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

    Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
    every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

    Hi Jim,
    yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
    I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
    Many thanks for your help.
    Andrej.

Maybe you are looking for