.cr2 Raws can't use "Merge to Panorama..."

Actually right clicking a .cr2 file and choosing "Edit in..." or "Merge to Panorama..."... or anything else that calls CS5 does nothing at all.  This function worked fine in v3 beta and in 2.7 (and still works in Bridge in various CS versions).  There must be some link between LR v3 and Photoshop CS5 that's broken.  Anyone know what to look for or where in order to fix this?  I'm on a Mac running 10.6.4.  Both Photoshop and LR are running as 64bit apps.  I also have the full CS3 and CS4 suites installed as well if that might be a problem (wasn't for the beta)
Thanks,
Bob Smith

I thought about that but was hoping not to do that... and go through considerable time to reconfigure lots of special prefs (all of which worked just fine with v3 beta).
I think I've found a simpler solution (and now don't think a re-install of Photoshop would have done it).
In poking around the contents of the LR3 package I see that virtually all of the scripts are set to be opened with Lightroom 2.  I still have Lightroom 2.7 on the computer.  I do a lot of work in a teaching environment where students are still working on 2.7.  I kind of hoped to keep both installed (again... that worked fine with the beta).  I could probably log in as root and reassign the default program for all of those scripts to Lightroom 3.  Instead I just trashed Lightroom 2.7.  So far all is well with the world again.  "Merge to Panorama..." works as it should with raw files again.
Thanks!
Bob Smith

Similar Messages

  • Need Help Can i use Merge command along with exist function in oracle?

    I am using Merge command to update the destination table and updating the rows which are already in the destination table.
    But what i want is to delete the existing rows from the destination table and insert fresh rows instead of updating the existing rows in the destination table.
    So can we use exist function to check the existing rows and delete them and use merge command to insert the rows in the table.

    You definitely need to do a DELETE then INSERT since MERGE will not delete rows, although I'm not really sure what that gets you since the net effect would be the same as a MERGE over the same pair of tables.
    If you really want to do it this way, then I would likely do something like:
    DELETE FROM target_table
    WHERE (columns_you_would_match_on) IN (SELECT columns_you_would_match_on
                                           FROM source_table
                                           WHERE predicate_you_would_use_in_using);
    INSERT INTO target_table (column_list)
    SELECT column_list
    FROM source_table
    WHERE predicate_you_would_use_in_using;John

  • Can not use "merge to HDR" or "open as smart object" etc.

    For some reason everything below the "Edit in Photoshop CS3" is grayed out. It makes no difference if I am trying to convert a jpg or nef file. Any ideas?

    You need 10.0.1, and there are issues with that version properly updating. Do a search and you may find those issues.

  • Merge to Panorama creates a split image of the whole merged image

    When I attempt to create a Panorama using "Merge to Panorama"/Auto with 11 CR2 RAW photos from my Canon 5d Mark ii the result is that I get a split image: 5 photos merged on the top of the canvas, and 6 merged on the bottom. I am using the most recent versions of Photoshop CC 2014 and a Mac Pro with OS 10.9.5. The same thing happens with "Perspective" rather than "Auto". Is there a size limit to how big the merged photo can be?

    Disk Utility>Restore will copy the OSX, the Recovery Partition and ALL user data.  It will be an identical copy of the internal HDD.
    Third party software such as Carbon Copy Cloner can also perform that same function, but also allow for incremental changes.
    Ciao.

  • Is it possible to use MERGE with sql*plus and if yes how?

    Hello everybody,
    I have an xls file and I have to load its data with sql*loader, but instead of "APPEND" operation stated in the control file I need MERGE operation.Here is what my control file contains:
    LOAD DATA
    INFILE 'C:\WORK\DSK_WH\LOAD_FIRST\sqlldr\data.csv'
    BADFILE 'C:\WORK\DSK_WH\LOAD_FIRST\sqlldr\p_badfile.txt'
    APPEND
    INTO TABLE D_ACCOUNT_NAMES_TMP
    FIELDS TERMINATED BY ";"
    TRAILING NULLCOLS
    (account_number , consignment, sub_consignment, consign_sub_consign, account_name_bg, account_number_2, consign_parent_2, account_name_bg_2, account_number_3, account_name_bg_3, account_number_4, account_name_bg_4, account_number_5 , ACCOUNT_NAME_BG_5 ).
    How can I use merge in this case , instead of insert ?
    Regards,
    Maria

    I'm not sure if there is any MERGE thing in SQL*Loader, but you can have a backup table which gets loaded by SQL*Loader and then use MERGE statement from backup to the original table, if your data is not huge to become a performance barrier. This is just a suggestion, may be you can try some reading of SQL*Loader here.
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/part2.htm#436160
    Cheers
    Sarma.

  • #Error & #Syntax when we are using merged dimension in BO4.1 SP3

    Dear All,
    We are using BO4.1 SP3 and Bex query as datasource.
    When we are trying to take merged dimensions in Report block its giving #Syntax Error.
    When we are defining variable with merged dimension, its giving #Error message and the merged dimension is deleted from the definition.
    Please guide how can I use merged dimension.
    Kindly let us know if there are some update required in the current BO version.
    Warm Regards,
    Sonal

    First things abt merge dimension is that merge is applicable only on dimension not on measures.
    And other is dimension that are going to be merge should have same data type.
    I think you should check these conditions then it will works.
    Merge is nothing but full outer join between two data providers. It helps joining two result sets on webi level.
    Kindly attach your screen shots so that it would be helpful.

  • XML insertion/updation using merge and generate sequence number

    Hi,
    I am working on Oracle 11g.
    I have a doubt with XML load.
    I get an xml and I have to insert or update data into a table A. This I can achieve using MERGE statement.
    But there is one column in Table A, that I need to populate with a sequence number, based on the data sent in the xml.
    The xml does not send this column data.
    And I have to make sure the sequence is created based on the order in which records are present in xml.
    For example the MERGE is inserting five rows and then updating next two rows and again inserting 3 rows from xml into table A. The sequence number should be created in the same order for the column in table A.
    Also for each new xml, the sequence starts with 1 and ends with the number of records in the xml. So I cannot create a sequence and use seq.nextval.
    Please let me know, there is a way of achieveing this.
    Thank you!
    Edited by: 934451 on Aug 8, 2012 6:33 AM
    Edited by: 934451 on Aug 8, 2012 6:50 AM

    Hi,
    Following up on your previous thread : {thread:id=2403469}
    You can use the FOR ORDINALITY clause in XMLTable to generate the required sequence :
    MERGE INTO target_table t
    USING (
      SELECT x.seq_num, x.pk_id, x.col1, x.col2, ...
      FROM XMLTable(
             '/root/record'
             passing my_xml_doc
             columns seq_num FOR ORDINALITY
                   , pk_id   number       path 'ID'
                   , col1    varchar2(30) path 'COL1'
                   , col2    varchar2(30) path 'COL2'
           ) x
    ) src
    ON ( t.pk_id = src.pk_id )
    WHEN MATCHED THEN UPDATE
    SET t.seq_num = src.seq_num
       , t.col1 = src.col1
       , t.col2 = src.col2
    WHEN NOT MATCHED THEN INSERT
    (seq_num, pk_id, col1, col2, ...)
    VALUES (src.seq_num, src.pk_id, src.col1, src.col2, ...)
    ;

  • Merge to Panorama in Photoshop not using edited RAW files

    When I had LR4, I could Edit in > Merge to Panorama in PS and it would take the edited RAW files and merge them. Now in LR5 it seems to be taking the unedited RAW files and making the panorama. Is there a setting or something I'm missing in LR5?

    Yes it is that simple. Just do a google search for Lightroom and Photoshop preference file locations and you should find them. The next time you start the programs, they will rebuild them. Of course, you'll have to re-enter any custom preference settings you've used. Good luck. Of course, when you think you've located them. Just rename them and move them into another folder first. That way, if you've picked the wrong file, you can easily move it back. Once things are working, you can just delete them.
    BTW, this is a good troubleshooting tool for any mac applications that are acting wonky. Just delete that preference file, and more often than not, the problem will be fixed.

  • Can't use "Edit in Photoshop" for RAW images

    I can't get Lightroom's "Edit in Photoshop" feature to work for CR2 RAW files (from Canon Rebel T2i).   I've installed the latest Camera Raw update, and Photoshop can open the RAW files.  However, when I use "Edit in Photoshop" within lightroom, Photoshop (CS5) opens, but then nothing happens.
    Previous threads have mentioned this issue, but none gives a solution that worked for me.  One user reported rebooting as the solution; other solutions involved trashing the preferences files for Photoshop and Lightroom.  I've tried those, but no luck.   The "Edit in Photoshop" feature does work for JPEG files. 
    Any further ideas?  I'm using Lightroom 3, CS5, and Mac OS (Snow Leopard).

    found the answer on another thread and it works!
    http://kb2.adobe.com/cps/401/kb401629.html

  • Why can't I download Canon S100 CR2 RAW files into PSE 10?

    I am using PSE 10 with a Canon S100 camera. I am successful in downloading all of my jpeg files and RAW CR2 files from my older Canon Rebel, but not with the Canon S100 CR2 Raw files.
    When first downloading from the Canon S100 camera into PSE 10 and later doing them manually, I receive the following messages:  Nothing imported...files are not supported file types or alread in catalog.  File damaged or in a format that cannot be included in the Elements Organizer.
    These problems files, by the way, were automatically added to my Window's My Pictures catalog and are perfectly fine.

    Thank you for the info. It worked great, once I was
    able to get around a second problem that prevented updating
    from within the PSE 10 application (error U41M1C212). That
    problem was solved by disabling the MS Virtual WiFi Miniport
    Adapter (located in the Network and Sharing Center control
    panel). It just goes to show me once again, how complex
    computer apps are and how much we all have to rely on each
    other to get anything to work properly (frustratingly
    enough, since the companies we paid good money to for
    their problematic software are not very helpful). Thanks
    again.
                Re: Why can't I download Canon S100 CR2 RAW files into
    PSE 10?
                created by 99jon in Photoshop Elements - View the full discussion
    Try opening a CR2 directly from a folder by right-clicking
    and choosing open with Photoshop Elements editor, if that
    dosent work, update the appliactaion (required for the
    S100V)
    In the Editor menu click Help >> Updates
    Then install amera raw 6.7
                Replies to this
    message go to everyone subscribed to this thread, not directly
    to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    http://forums.adobe.com/message/4602882#4602882
                To unsubscribe from
    this thread, please visit the message page at
    http://forums.adobe.com/message/4602882#4602882. In the
    Actions box on the right, click the Stop Email
    Notifications link.
                Start a new discussion
    in Photoshop Elements by email or at Adobe Forums
                For more information
    about maintaining your forum email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • How can I locate the original .CR2 /  Raw file from Photos in finder?

    How can I locate the original .CR2 /  RAW file from Photos in the finder window? I would like to know a easier way to open my files and use them in Photoshop than having to go to the Pictures folder, right clicking "show packaged contents", and manually searching for my CR2's / RAW's. It is also ridiculous to have to export the RAW file to my desktop, and then take it into Photoshop or another photo editing program.  I was able to do this in iPhoto and find I cannot do so in Photos. Please help? Can you please consider adding a right click function that says "Show Original file in Finder". That would make it so much easier and better for those of us who want a simple way to access the original files and use them in other editing programs. At least with iPhoto you could go to the top menu / preferences and find your items.

    http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback
    Rather than use the 'Show package Contents route, the supported and safer way is to export the unmodfied original.

  • How much of the RAW tonal range is conserved when using "Merge to HDR Pro"?

    Hello,
    I am wondering how much tonal range is saved when making a HDR image with Photoshop? I have three photographs with an EV diference of 3. I can combine them into one HDR file just fine, but I can't turn one of them into an HDR file. This has made me wonder the following. If Photoshop is unable to turn one RAW image into a 32-bit image, then how much range is lost in the conversion process? If I try to open a RAW file in Photoshop for saving into a EXR. file for instance then I notice that Photoshop simply turns my image into an ordinary 8-bit per channel image.
    I am using a camera with a very good CMOS sensor and the RAW data that my camera produces is of a very high tonal range. It would be a shame if Photoshop discards said range. This is a question that is very hard to Google since everyone that is using HDR is obsessed with tonemapping. I have to clarify that I don't care about tonemapping I just need the range. I would love to have an official Adobe employee answer some of my questions.
    So these are my questions:
    Why can't Photoshop turn a single RAW file into a 32-bit image by using HDR Pro?
    Does the fact that Photoshop can't turn a single RAW into a 32-bit image mean that all the range is lost when merging many RAW files?
    Does anyone know of a way to capture the full dynamic range of a single RAW image without using time consuming nonsense like virtual bracketing?
    If there is a way. How would you combine many 32-bit images into a single 32-bit image in order to maximize range.
    Why is no one else wondering about these things?

    I am looking forward to an anwer concerning the HDR preview-result-difference as well... Since some posts suggest to check out the color profile of the input files, i did so: they are both sRGB. And the immense change of saturation and brightness (in other examples even worse than below)  couldn't be explained by a different profile anyway, IMHO.
    working parameters:
    Adobe Brigde CS6 (Tools/Photoshop/HDR PRO)
    Adobe Photoshop CS6
    sRGB both input and output...

  • Can we use where clause in Update on Merge statement?

    Hi All,
    I tried to execute the following Merge Query:
    When this query is executed without ‘Where clause’ in Update statement its working fine. When executed with ‘Where clause’ it throwing the following error:
    ORA-00905: missing keyword.
    Following is the sample query which I tried to execute:
    MERGE INTO TABLE_NAME
    USING (SELECT COLUMN FORM TABLES)
    ON (CONDITION)
    WHEN MATCHED THEN
    UPDATE SET
         COLUMN UPATES
    WHERE CONDITION -- Can we use where clause here?
    WHEN NOT MATCHED THEN
    INSERT
    INSERT VALUES;
    Can some one help on this?
    Thanks in advance.
    Darius

    Yes:
    SQL> drop table emp1;
    Table dropped.
    SQL> create table emp1 as select * from emp where deptno = 30;
    Table created.
    SQL> update emp1 set sal = sal*2;
    6 rows updated.
    SQL> commit;
    Commit complete.
    SQL> select ename,sal from emp1;
    ENAME             SAL
    ALLEN            3200
    WARD             2500
    MARTIN           2500
    BLAKE            5700
    TURNER           3000
    JAMES            1900
    6 rows selected.
    SQL> MERGE INTO emp1
      2  USING(select * from emp) emp
      3  ON (emp1.empno = emp.empno)
      4  WHEN MATCHED THEN
      5  UPDATE SET sal = emp.sal WHERE ename = 'TURNER'
      6  WHEN NOT MATCHED THEN
      7  INSERT(ename,sal) VALUES(emp.ename,emp.sal);
    9 rows merged.
    SQL> select ename,sal from emp1;
    ENAME             SAL
    ALLEN            3200
    WARD             2500
    MARTIN           2500
    BLAKE            5700
    TURNER 1500
    JAMES            1900
    SMITH             800
    JONES            2975
    CLARK            2450
    SCOTT            3000
    KING             5000
    ENAME             SAL
    ADAMS            1100
    FORD             3000
    MILLER           1300
    14 rows selected.
    SQL> SY.

  • I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures.Is it ok if i create a vault and delete all my projects in the HD.Can I use an external HD use aperture through the vault??

    I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?

    There's a bit to learn.  It will slowly make sense.
    Aperture is an empty field.  You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
    Vaults are for back-up and only for back-up.  They have nothing to do with storing your working files.
    When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced.  ("Managed" and "Referenced" refer to Masters, not to Libraries.)
    There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
    Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives.  This is a good set-up.  Note that you will likely have to take steps to back-up the data on your external drives.
    If you do the above, there should be no reason to delete any Projects.
    The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing.  I capture RAW only -- but I don't do any commercial shoots.  Pros on deadlines report that the RAW+JPEG works well for them.  Capture JPEG if it saves you time.  IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
    Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive.  (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
    This general post of mine might help you understand more about Aperture.

  • How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

    How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

    Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

Maybe you are looking for