CR2008 SP3 Full Build - Another version already installed?

I'm switching to a brand new workstation so I'm trying to install CR 2008 SP3 Full Build.
I've already installed the base software from our original license purchase (which is 10.0.0.683). I downloaded SP3 full build so I can update that fresh install but as soon as I run setup.exe, I get an immediate error:
"Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel".
Nothing else is installed for CR2008 aside from the base software. Not sure why the full build is giving this issue.

Ah, wasn't aware that the full build also installs the base software. I just thought it was all 3 service packs rolled in to one minus the actual software.
Uninstalled the base and installed the SP3 package straight and that worked. Thanks!

Similar Messages

Installer built with Application Builder gives error "Cannot install, higher version already installed"

I am having an issue with an installer which I created with the Application Builder. I have a project that I have successfully deployed. Subsequently I created another project (and vi) which is based on a copy of the originals, both with new file names. In the renamed project file, I changed all file names, paths, and all resources, to reflect the new names. I also changed the installer’s destination and install folders, of course. I reset the executable’s version number (in the Build Specification properties) to 1.0 (the original was 1.3). I then successfully built an executable and the application installer. However, when I run the installer (setup.exe), it gives a dialog (after the license screen) that it “Cannot install” because a “higher version already installed”.
I’ve done exactly the same thing with other vi’s and projects of mine, and never had this issue. The installer correctly installs the newly created (and renamed) version where it is told to in the project file. Also, I’ve never had a problem deploying (installing) on my development PC either.
I have carefully checked and rechecked to make sure there is no reference to the original executable or paths. What could be causing this behavior? I want to keep the two projects completely separate, so simply changing the version to higher than 1.3 is not an acceptable solution.
Thanks to anyone in advance for any help and suggestions.
Ed

Yes, LV 8.5 does NOT give me control over the GUID. In the project file there are three such strings:
"App_applicationGUID"
"App_INI_aliasGUID"
"App_INI_GUID"
They all have different numbers and none of them match the GUID or PackageGUID in setup.ini. I don't know if they are related or not, but usually it's not a good idea to mess with (manually edit) files like these (project, ini, etc.) unless you know what you are doing. (For example, I do edit the setup.ini file to change some of the [Dialogs] parameters, but that is based on direction from NI support.)
Anyway, like I said, I've made copies of projects before and never ran into this problem. At least I have a solution, however laborious, in creating a new project file from scratch.
Let me know if anyone has more thoughts on this.
Ed

Quicktime will not install because of it thinks there is a newer version already installed.

I don't even have QuickTime installed and it is telling me it cannot install because of a newer version already installed. I have searched completely and found nothing. I have Windows XP and am trying to install the latest version of QuickTime.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

Please help. "compatible version already installed"

Firstly I have installed Application Server Platform Edition end after that I try to setup portal server and I see there were application server enterprise edition with the downloaded package, and try to setup all. I have try to setup the Java Enterprise System and I have made some wrongs, maybe because of my mistakes maybe another things but there were no folders which I have defined. And when it was loading there is only one screent OrionUninstallersun-ps7_0-entsys. When I try to uninstall the system I have seen there is only this file "/var/sadm/prod/sun-ps7_0-entsys/uninstall_Sun_Java_tm__Enterprise_System_2005Q4.class" There were no another file. I have tried to unistall but I cant make it. After that I have deleted all the files about Java Enterprise System. When I try to setup again Java enterprise system, at start, it is saying "Compatible Complete, Compatible Version Already Installed A Complete, Compatible version of the Sun Java System Web Server 6.1 SP5 2005Q4 has been detected on this host" . When I pass to the next steps this time it is asking me "Please locate the web server that the load balancing plugin is for. Plugins are avalilable for either the Sun or Apacher Web Servers" When I bring it with default value "Invalid Web Server Location" message is coming. What I have to do please help me. Why the files is not loading?

I am using linux and I have tried this command
rpm -qa |grep sun | xargs rpm -V
and it is giving very long list
missing /opt/sun/portalserver/portal/export/request/calendarSSOAdapterService.request
missing /opt/sun/portalserver/portal/samples/Calendar/calendarChannels.xml
missing /opt/sun/portalserver/portal/samples/Calendar/calendarProvider.xml
missing /opt/sun/portalserver/portal/web-src/WEB-INF/classes/CalendarProvider.properties
missing /opt/sun/portalserver/portal/web-src/WEB-INF/classes/LotusNotesCalendarProvider.properties
missing /opt/sun/portalserver/portal/web-src/WEB-INF/classes/MSExchangeCalendarProvider.properties
missing /opt/sun/portalserver/portal/web-src/WEB-INF/lib/calendarprovider.jar
missing /opt/sun/portalserver/portal/web-src/WEB-INF/lib/jcapi.jar
missing /opt/sun/portalserver/portal/web-src/docs/en/desktop/calendar.htm
missing /opt/sun/portalserver/portal/web-src/docs/en/desktop/sunlogo.gif
after that what I have to do?

Cannot install quicktime due to newer version already installed

I'm in desperate need of help. I've been trying to install Itunes for the last 4 nights but QUICKTIME is messing it up. I keep getting the error that a newer version of QUICKTIME is already installed and the installation can't continue.
I've been scouring the internet for hours over several nights to find a solution without luck.
There is no entry in the Programs uninstaller for Quicktime.
I've scoured all my HDs for quicktime and removed all entries
I've run several reg cleaners and regedit to clean out any reference to Quicktime
I've used the 'how to uninstall quicktime' support page and used the MS install cleanup utility, cleaned out temp files, used JV Powertools to clean out Quicktime.
I've used both the standalone installer and the Itunes installer
I've tried using safemode to install but the installer doesn't work in safe mode
I've tried uninstalling several codecs in the chance that they are somehow effecting this
I'm at the end of my rope and both me and the internet appear to be out of ideas. Of course, I need to get Quicktime on to use Itunes and my Itouch.
I'm running a fully updated Vista install. Any suggestions would be appreciated.

I am having the same problem. I am using Windows XP on an HP Media Center PC m7167c. I have tried everything to fix the issue. Nothing works. HEY APPLE, Can you please fix your QuickTime installer to override the "Newer Version Already Installed" message when there is no QuickTime installed. This problem has been going on for over a year. Please provide an easy alternative way to FORCE INSTALL QUICKTIME. Thanks

Wsus wants to download old versions already installed

hello!
I have done a package for the clients with the update Flash Player 11.0.0.77. The clients have sucessfully downloaded and installed. The problem is that Windows Update finds in that clients an old package with the version Flash Player 11.0.0.70 to download.
Why doesnt it know that an newest version is already installed?

hello!
I have done a package for the clients with the update Flash Player 11.0.0.77. The clients have sucessfully downloaded and installed. The problem is that Windows Update finds in that clients an old package with the version Flash Player 11.0.0.70 to download.
Why doesnt it know that an newest version is already installed?
Truly.. the most likely answer is that you've misconfigured the rules for the 11.0.0.77 package.
First question would be: Why is the 11.0.0.70 package still approved and available to the clients?
Second question would be related to how you defined the rulesets and whether you listed the 11.0.0.70 package as superseded by the 11.0.0.77 package.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Upgrading to 7.4 receive message saying later version already installed

I was trying to download music in iTunes store and received message that I needed to upgrade to latest version of iTunes to continue. I downloaded the latest version, tried to install it and received the message,"A later version of iTunes is already installed. Installation of this version cannot continue."
I followed all of the troubleshooting steps to delete earlier versions of iTunes and Quicktime including removing the Temp files and running the Windows Installer Cleanup Utility Package. The Windows Installer Cleanup Utility Package showed no entries for iTunes, Quicktime or any blank entries with 7.1 codes (my previous version of iTunes).
Does anyone have any further suggestions?
Thanks,
mirth100

I fixed the problem using the Windows Install Clean Up utility. On running the utility there WAS a blank entry at the very beginning of the list. I thought it was a category header at first. I removed the blank entry with the utility, restarted the computer and successfully loaded iTunes 7.4.3
Thanks for the earlier suggestion about the Windows Install Clean Up utility and to look for blank entries to remove!

Add-ons Manager Says Java Needs Update, But Latest Version Already Installed

I have Java version SE7 U51 10.51.2.13 installed and working fine. Today I "upgraded" to FF 28.0. Now the Add-Ons Manager says Java is out-of-date, but when I go to the Java website, this is the very latest version available. I downloaded both the 32- and 64-bit versions anyway (though I had already installed them a month ago) and re-installed both. The FF Add-Ons Manager still has same warning: "Vulnerable- Update Now!" The Java Test page says I have the latest version, and it works.
So what the heck to do?

Never mind- found the answer. It's the same old silly runaround between Firefox and Oracle. The Firefox link send you to the wrong Java version (outdated) and you have to find the correct Oracle webpage that now has Java version 8 (actually v.1.8.0 plug in 11.0.2.132) and download and install THAT. It would be nice if this were simpler...

Most recent version already installed.....but can not open & use NM

I recently installed nM on my lap top so I can make the new printer print wirelessly...the desk top computer needs to have NM installed too. I downloaded it & then clicked "install" it tells me it is already installed....but will not open or start ordo anything.... any advice?
THX both machines are using XP. The desktop computer is connected to the router & the printer... the laptop can not find the printer... that is why I am trying NM... have used in the past & never a problem....

Try these following steps:
•open the C Drive
•open program files
•open Pure Networks folder
•open support folder
•double-click on serveme application
•right click on the Network Magic icon (w/c is found on the system tray) and select Stop NmService, once you have done this the ServeMe icon will turn red
•right-click on the Network Magic icon on the system tray and select Delete NetworkLib.xml
•right click on the same icon again and select “Force First Run”
•repeat all the steps above for all computers connected to the network
•restart all your computers connected to the network; this will restart the Network Magic service

Attempting to install a compiled 8.6.1 package fails with "NI Variable Engine (higher version already installed)

This is long as there are a collection of details I thought would be useful. Please bear with me.
I have a VI compiled with LV 8.6.1 PDS. The installer ran on the development machine and it works fine there (WinXP SP3).
Was handed a laptop (another WinXP SP3) that already had LV 7.0 (academic) on it. Someone was fiddling with an old version of LV. OK.
Wanted to uninstall 7.0 so there would be a clean field for the program compiled under LV 8.6.1.
So: Start --> Control Panel --> Add/Remove Programs and uninstalled "National Instruments Software". That went smoothly. It wanted a reboot. Fine.
Ran the setup program in my package, the one I'd wanted to install. No errors. The following installers were included with the Build:
* NI LabVIEW Run-Time Engine 8.6.1
* NI Measurement & Automation Explorer 4.5
* NI DAQmx 8.8
By the way, this generated an installation package of "almost" 900 megabytes.
Connected the hardware (one ethernet-based, another RS-232 based). Started the program, "EDGAR2".
First error:
Unable to locate the LabVIEW Run-Time Engine.
EDGAR2 requires a version 8.6.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of EDGAR2 to correct this problem.
(This is Error1.JPG, attached).
A check of C:\National Instruments\Shared\LabView Run-Time\8.6 shows that there is only one item in that directory: a sub-directory named "errors". That's it. If the executable is looking for something in the 8.6 directory, well, there's nothing there.
Uninstalled EDGAR2 using the Control Panel. Reinstalled. Same problem.
Downloaded the standalone LabVIEW Run-Time 8.6.1 installer, Standard Edition, from NI's site, unpacked, and ran the setup.exe from that package.
There is one box with a green checkmark in it: NI Variable Engine .
Click Next. Up pops a pane and Error2.JPG is attached. It won't continue because the "detected" version of Variable Engine is of a higher revision.
The "Next>>" button is grayed out.
Uninstalled EDGAR2 again. But there was no entry in the Windows uninstall panel for uninstalling any National Instruments software. This raised a flag in my mind and NI Support was telephoned.
With the Support Guy running Google searches for relevent topics (I'd done some of that, too), a number of things were tried.. ending up with deleting everything in C:\Program Files\National Instruments while in Safe Mode, everything in C:\Documents and Settings\All Users\Application Data\National Instruments, going through the Windows Registry with REGEDIT, uninstalls and attempted reinstalls. Nope, nothing worked. That defective Variable Engine seems glued into the system
The application can't find the 8.6.1 run-time because it doesn't exist. It doesn't exist because both the standalone and built-in installers see a Variable Engine of a higher version installed and apparently won't install over it. There is no uninstall for any NI software in the Windows Control Panel --> Add/Remove pane and so I can't seem to get rid of this Variable Engine.
At this point, the Support guy says, "Time to reimage your computer. Call us for anything else.. you know we're here for you."
This is the first trouble I've had installing a compiled VI. All other packages built with 8.6.1 PDS just slid right in.
There's been a LOT of software installed on the target over the years and going on the proverbial "scavenger hunt" to locate all of the installation disks will be a time-consuming task (a week is a conservative estimate). Is there a solution to this problem? Where are the installers "looking" for the Variable Engine revision level? Is there a specific Registry key that can be adjusted?
Went looking through the WinXP Event log. No errors are popping up there.
Your time is appreciated.
Mark
Attachments:
Error1.JPG ‏17 KB
Error2.JPG ‏28 KB

Hi Mark,
I'm sorry to hear your having trouble installing the LabVIEW 8.6.1 Run-Time Engine. It sounds like there could be a few problems going on here. First, you should have more options when installing the Run-Time Engine than just the Variable Engine. If you uncheck the Variable Engine, does it try to install anything? Second, not being able to install the Variable Engine suggests that there may be something wrong with your registry. If you removed all National Instruments keys when cleaning the registry, then this shouldn't be a problem.
At this point, there are a couple things I would suggest. Unfortunately, the best solution would probably be to reformat. It sounds like some low level parts have been corrupted and this would be the quickest way to fix everything for sure. Other than that, you can try installing the full 8.6.1 Development System on the computer. This will install the Run-Time Engine on the computer. You can simply not activate the software, which means you won't be able to edit anything. You will be able to run the program, though.
Jared S.
Applications Engineering
National Instruments

App icons changing to another one already installed?

This has happened to me twice now:
I installed an app and it had the right picture with it. The app opened and worked. The next time I went to the page on my iphone the app had the icon of another app but it still loads the app right.
What's going on?!?

That rules out that theory then, CAT cable it must be, all being the neighbour will agree to my request.
Something interesting I have found on the Connecting Cheshire website's FAQ's.....
From Spring 2013, anyone in an FTTC-enabled area can upgrade to FTTP. FTTP allows any end-user to have a full fibre connection installed to their home or business premise. There will be a charge for the associated network build and an installation charge – all based on distance from our nearest network nodes. FTTP will allow access to speeds of up to 330Mbit/s downstream and 30Mbit/s upstream.
Enquiries about FTTP should be directed to your ISP. Please note that orders for FTTP will be subject to a detailed local survey and additional connection charges.

Quicktime says I have a newer version already installed... Not!

I deleted quicktime and all it's library components because it wouldn't load. I downloaded a new version from apple.com and now it says I can't load it because I already have a newer version installed... But as I said, I deleted it and all it's shared components from library.
Any thoughts?
Tony

Look in the HD/Library/Receipts folder for a part you didn't delete.
Try the installer again after removing the .pkg file.

Keeps offering update to 3.6.18 although this version already installed !

using osx for mac, 10.4.11 keep getting reminded to upadate to 3.6.18 although this version has already been installed in the past !
Using a dual processor 2gh G5.

Yes I am. have now downloaded 3.6.19 from http://www.mozilla.com/en-US/firefox/all-older.html (rather hard to find, not listed in the 'blue info' at the lower end of the site info.

Itunes won't install - error message "Later version already Installed"

I'm a stumped PC Windows XP user - I have downloaded the last few updates to Itunes and each one has said that I already have a later version of Itunes installed. I have uninstalled, deleted and cleaned up all files as suggested by Apple and even gone to the trouble of manually editing the registry to delete all Itunes, Ipod and QuickTime references to see if that will sort it, to no available.
The bit I don;t undersdtand is how can a aletr version than the current one exist unless there are version numbering or date issues.
Anyway I have had to regress to version 7.1.1.5
Any clever people have a clue.... All help much appreciated
Message was edited by: Chilladaddy

I'm a stumped PC Windows XP user - I have downloaded the last few updates to Itunes and each one has said that I already have a later version of Itunes installed. I have uninstalled, deleted and cleaned up all files as suggested by Apple and even gone to the trouble of manually editing the registry to delete all Itunes, Ipod and QuickTime references to see if that will sort it, to no available.
The bit I don;t undersdtand is how can a aletr version than the current one exist unless there are version numbering or date issues.
Anyway I have had to regress to version 7.1.1.5
Any clever people have a clue.... All help much appreciated
Message was edited by: Chilladaddy

Cant Install Itunes -- Error says Quicktime has a Newer Version already installed? Whats up with that? I can only install Itunes as a Bundle with Quicktime--

I am running WINDOWS 7
I have read up on this error-- Nothing is working.. Now I have No Itunes,
I tried to UNINSTAL Quicktime- it wont let me from (Add/Remove) Programs-- Says there are some POLICIES in place that wont allow
me to *Install (Hello) Im Uninstalling-- And I am the Administrator--
I found the DELL Installed (Hidden) Administrator and tried to do it while logged in as it-- NO WAY- same error
So, I deleted the (2) (QTS) files in syswow64? Windows system folder for WIN7 64 bit
Rebooted
Still not able to Uninstall-- GRRR
I have no more ideas.. I saw a site or two that had a copy of ITUNES (Unbundled) for install- but it didnt look safe or authorized by Apple- so, I didnt do it
Besides.. I now dont have a good VER of Quicktime on board either-- without those QTS files--
Im really messed up--
Can someone help!

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

CR2008 SP3 Full Build - Another version already installed?

Similar Messages

Maybe you are looking for