CR6.4 RC1 - XMP export bug, anybody else has it?

I think I found a bug, and although I also found a workaround, here it is.
My environment: Windows 7, Photoshop CS5, Camera Raw 6.4 RC1, all of them 64-bits.
Steps to reproduce the bug:
1. Open several raw files at once in Camera Raw (in my case, Olympus E-PL2 ORF files, but it probably doesn`t matter). For this bug, take images that are likely to have different white balance settings. Also make sure that those are original files, never modified by Camera Raw (or anything else) and that they have no XMP sidecars yet.
2. Wait until thumbnails are generated (may not be relevant...). Don't click on any of them, just let them be created.
3. Click on "Select All". Again, don't change the displayed image, just select them all.
4. In Basic/White Balance, select Auto. All thumbnails are properly updated
5. Export settings to XMP (from the menu on the right-most toolbar, i.e. still "Basic" if you haven`t changed it)
6. Keep Camera Raw open, and have a look at the XMP files.
The BUG : they all contain the same white balance settings (crs:WhiteBalance, crs:Temperature and crs:Tint) which happen to be the computed settings for the first image (the only one displayed so far). All other settings seems to be fine though (i.e. they are from their respective image).
However, if you go back in Camera Raw and then click on some other images, not all of them. You can see that their WB settings are different and properly computed (as far as "Auto" can properly compute them). Export to XMP again. WB settings are then right, but only for the images that you clicked on. Those that were never displayed full size still have the wrong WB settings (from the first image).
Obviously, the workaround is to click on each of them. Still that's a bit awkward, especially in my "quite-automated" workflow, where I'm not yet to the point to look at each image individually. Can't tell if this bug exist too on any other version of CR, and my E-PL2 raw files can only be opened in CR 6.4 anyway (unless I change some tags to fool CR).
Can anybody can reproduce that bug on similar or different environment? And could Adobe fix it, if it is a bug?

btw, don't know why I wrote RC1... I just meant Release Candidate!

Similar Messages

  • Iphoto would not import movies from Iphone 4 - ANYBODY ELSE HAS ISSUES?

    Hello,
    Yes Iphone 4 is so sexy.
    I have reception issues too unfortunatly , only where reception is weak anyway, but yes it happens...
    also iphoto would not import most of the times
    the iphone 4 videos?
    any suggestions why and how to fix it ?
    Many thx
    Anteros

    I was encountering this on the developers' beta of iTunes 9.2 on a gigabyte-sized iPhone 4 movie. (I am in Developer Program.)
    I just reinstalled with the standard iTunes download and was able to do a successful import directly from the phone.
    Perhaps an iTunes reinstall can fix it for you as it did for me.
    -- Andrew

  • Has anybody else had any problems running Kaspersky Internet Security 2015?

    I recently installed Kaspersky Internet Security 2015 on both my Macbook and iMac. Since installing it my system runs so incredibly slow that I had to turn it off. I am awaiting a response from their support but in the meantime I would like to know if anybody else has used this product and if so did you have any problems running it.

    Telling people antivirus is not needed on a mac is  an ignorant comment.
    Actually it is a very knowledgeable comment
    How does Mac OS X protect me? 
    <http://www.thesafemac.com/mmg-builtin/>
    The problems you are having are typical of the complaints we see with 3rd party anti-malware products on a Mac.  Many of the long term forum contributors have been using Macs since the previous century (I started in '88).  Many of them are also computer professionals for their day jobs (or before they retired).
    We are NOT parroting the company line.  We have been paying attention to the features in Mac OS X, and the lack of virii on Mac OS X, the performance complaints from users with anti-malware products installed, as well as the kernel panics from anti-malware products.
    The current biggest problem on Mac OS X are browser scareware pop-ups, adware, and trojans that trick users to install them.  And so far, none of the anti-malware products seem to have protected Mac users from the adware and trojans.

  • Ok has anybody else seen a big drop in their synch...

    Ok since the really bad rain on Thursday night my noise ratio had dropped from 16 dB down to 5dB and although I was still at 40/10 my max attainable had dropped to just over that.
    A quick reboot of the modem this morning improved that with the noise margin going back up to 10dB and the max attainable going up to 45 meg/sec and I was wondering if anybody else has seen such a big change in their stats in the last couple of days?
    And by the way my VDSL2 profile stayed stuck at 8c.

    Ok an up date came down this morning and found the router had reset itself in the night and now my stats are are
    Basic Status
    Upstream
    Downstream
    Unit
    Actual Data Rate
    9994
    39904
    Kb/s
    SNR
    219
    62
    0.1dB
    So now I last lost 10 decibels of noise margin which corresponds to about 12 meg of attainable.
    I am on 40/10 just but I am wondering why is it happening on just the download as the upload is untouched.
    Oh well the BT checker with it's 33 meg/sec estimate may be correct after all.

  • HT6114 Anybody else lost the Shared items?

    Hi,
    Just wondering if anybody else has lost the Shared items from the side panel since this update?
    I updated it on the MacBook and Shared items has gone and I've no clue where!
    So Im wondering what to do about the update on the iMac!
    After the update there were a whole series of prompts for passwords to keychains
    (iCloud, facetime etc)
    Is that part of the problem?
    Any help appreciated.

    Hi,
    Maybe he did - but his landed in my inbox first!
    I just tried your suggestion of checking/ unchecking - no change.
    You say if nothing available, nothing shows - but there's a PC in the house that used to be on the list.
    So the macBook used to list my iMac, the PC (plus something I can't remember!)
    And the iMac listed the macBook, the PC (and the mystery item also!)
    But now neither of them are showing anything

  • Has anybody else been seeing (Not Responding) at the top of the screen and having thier browser not respond to wheel scrolling and scrolling with the usual slider at the right part of the screen?

    I have noticed my Firefox browser is having way too many incidences where it is "Not Responding". The browser freezes up for a second quite often and the "Not Responding" message will appear at the top of the screen.
    The browser will also not scroll with either the scroll bar on the right nor with the mouse wheel. Both used to work in previous versions of Firefox, but it seems to have gotten worse since Firefox 5 0r 6. The same with the "Not Responding". It is happening more with Firefox 7 than in at least the past two versions.
    Anybody else having these issues? Seems like they are hand-in-hand. Thanks for any and all help or advice. It's making me pretty angry since I'm online all day for work.
    Just an FYI. At the bottom of my troubleshooting copy/paste is a suggestion to update the driver for my graphics. That was a no-go. I tried that.

    Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
    One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
    Thanks again, I'll get back with results once I get the wounded laptop back up and running.

  • Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

    hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
    much respect,
    tommy bravo

    After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
    Luis

  • I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

    I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

    Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

  • Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Hi Tech5Apple,
    Thanks for visiting Apple Support Communities.
    If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    All the best,
    Jeremy

  • Has anybody else noticed that Find/Change searched according to -

    Has anybody else noticed that Find/Change searched according to date added?  It doesn't go page by page — it searches in the ORDER that text was added to a document.
    For instance, if you started with Pages 300-400, then added text to page 200, then added text to pages 100-200, THAT IS THE ORDER Find/Change will search.  Crazy, no?
    By the way, does anyone know how to FORCE Find/Change to always center a spread?  Currently, it moves the various pages all over the place during a search …

    We are using Exchange 2010 and IOS 6.0.1 and seeing this issue with exceptions associated to recurring meetings on both the iPad and iPhone. 
    Oddly, you can make the first change (time of meeting, for example) to an exception in the series and have the change sync from Outlook 2010 to the iPad. If you attempt to make a second change to the same exception, the 2nd change does not sync to the IOS device.  Thoughts?

  • I have a 27"iMac running Snow Leopard 10.6.8. and Windows 7 on      parallels 6. My dvd player will not play DVDs. Has anybody else had this problem.

    My DVD player will not play any DVDs. Anybody else have this problem.

    This has been sorted.Got a new iMac 27" with Lion already installed and DVD player works. Thank you to all who replied.     Meloc

  • Has anybody else noticed a 10-25% openGL slow down with 10.7.5?

    Hi,  I was running x-plane 9.70 at certain settings on my 17" MBP (early 2011, 10.7.3) and noticed I was getting about 70 fps... nice.  I do an update on firmware and OS (10.7.5) and I notice that the x-plane fps has dropped to about 55. The settings and environment the same as near as I can get.  I thought this was bad but maybe just x-plane or something peculiar.  I also couldn't tell if the performance drop was caused by the firmware update or the OS update. 
    I remembered I'd done an xbench benchmark with 10.7.3 so I did a new one with the updates... sure enough the openGL numbers had dropped by 20% or so.  So, I hooked up my backup drive with 10.7.3 on it and ran x-plane and xbench again to try to isolate the firmware update from the OS update.... The results were x-plane still showed a drop of about 10% and xbench about 25%.  Looks like there is something wrong in 10.7.5.
    Has anybody else noticed a performance slow down in openGL functions with 10.7.5?
    Khan

    Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
    One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
    Thanks again, I'll get back with results once I get the wounded laptop back up and running.

  • Copy/Paste/Edit menu bug. Anybody else seen this?

    I have a project with an imported stereo wav file on track one. It is about 8 minutes long, 44.1k. I am trying to copy small regions of this track and then paste those into track two and make these little pieces real audio clips. (Thanks again to Bee Jay and Jim Frazier for the help with that!) In this example I use the Marquee tool to highlight a 2 measure section of track one and from the Edit menu I select COPY. Then I select track two and move the playhead to the location I want to paste the copied clip.
    Now, when I click on the Edit menu to select PASTE the drop-down menu is gone! However, to restore it I found a way. Minimize Logic, then maximize it again and the Edit drop-down menu has returned ! Very strange.
    This has got to be a bug although not too serious. But it is very annoying having to minimize/maximize Logic just to get the drop-down menu back especially since I am using this copy/paste function a LOT. So it makes it very time consuming to have to do this. And it happens every time for me.
    I sent this in to the feedback of Logic but wondered if anyone else has seen this?
    Thanks,
    Greg

    Yes - I had this today for the first time in fact!
    The Edit menu title was still in the bar, by when you clicked on it, the edit menu was completely gone and didn't drop down (the rest of the menus were fine). A weird one. I found it amusing for a couple of minutes until I got it back again (I've no idea how I did it) and it hasn't happened since.
    Another one for the buglet files, methinks...

  • Has anybody else's itunes stopped working since the new download?

    Has anybody else's itunes stopped working since the new download?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
    (99096)

  • My Macbook Mavericks pro does connect well to a data projector, even after following the process recommended, what is the optimum display settings? Has anybody else had this problem, I'm close to going back to PC's

    My Macbook pro Mavericks does not connect well to a data project even after following the recommended process, Has anybody else struck this problem, what is the optimum display setting? Im close to going back to PCs

    You said " digital AV Adapter and thunderbolt". Do you mean Thunderbolt/min displayport to HDMI adapter?
    It appears you are using the free version of the Display Menu app.
    What does the Apple Display properties show? System Preferences>Displays>Display show?
    Look at the projector/go to the manufacturer's support site and find the native resolution of the projector.
    Googling for Sori data projector id not produce any hits

Maybe you are looking for