Crack in palm rest.

Yeah my palm rest cracked like lots of other people have. Will Apple fix it for free. I have apple care. Its also cracked a bit by the speaker in the back. I take good care of the machine Never dropped it. It's a 2.16ghz core 2 duo so its not too too old.

Does Apple fix cracks in the bottom casing under warrantee?
I went to the Genius Bar in Ginza (Tokyo), and they told me that the palmrest/keyboard assembly can be replaced free of charge as long as it is under warrantee (In my case, it was).
I also told them about the countless small grey-colored cracks around the bottom casing (near the ports, front part of the bottom assembly, places near the hinge/speaker grill), and they said that those are not covered under warrantee.
The Assistant Store Manager even came out and concluded that cracks besides the palmrest/keyboard assembly are due to rough handling, and that they see no reason to fix it.
"If you don't want the cracks, don't move it around." was their solution...

Similar Messages

  • Macbook Air 2010 trackpad stop working when touching case (palm rest)

    My MBA 2010 A1369 had demaged keyboard and trackpad by liquid. I got used whoel top case and replace. (not myself)
    Seller claimed it is ok but we face one problem. when I touch case (palm rest) trackpad stops responding. When on one side partly when with both hands then completely. Even when touching case from side. Even when case is comered by paper. So it strange behavior.
    Both cases were from A1369 model but on mine was black plastic foil over part of keyboard while on other not. So I am not sure there could be some other differences that could cause this.
    Would anybody has any suggestion where could be problem? Wrong contact bad insulation somewhere or faulty trackpad.
    Thanks a lot.
    Frantisek

    I reply by myself. Problem was in trackpad. I tried another one and it is ok now. Previous one probably suffer some liquid demage on sides.

  • Can I use a 60Y5419 palm rest on an X201 (not X201s) rather than a 60Y5415

    I need to replace the palm rest on my X201.
    I believe that the proper part for the X201 is the 60Y5415 and the part for the X201s is the 60Y5419.
    Are these parts different to the degree that I can not use a 60Y5419? I can get one for half the price, so I would much rather use a 60Y5419.
    Thanks!

    It's good to read Antoniad's post.  It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing.  However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested.  He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do.  I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing.  Those sources were quite specific and the information seemed clear.  I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad.  I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go.  The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon.  I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers.  Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account?  I don't know.  I have to find out.  If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

  • Part number for DV2535EA palm rest panel

    I'm trying confirm the part number for palm rest top panel for a DV2535EA (p/n GJ032EA#ABU )Anyone help on this !many thanks ...

    Hi Rod_RAB,
    Welcome to Lenovo Community!
    As per the query we understood that you are looking for LCD panel for your Lenovo G50-30.
    You can use any of the above 3 parts, all are supported. Suggest you to visit nearby authorized service center for genuine Lenovo parts.
    Please click here to visit the Lenovo support link and select your region to get the contact number.
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Truly doesn't fit anywhere: Palm rest area question.

    The palm rest area, toward the bottom of the computer, has started to peel/chip away.
    Literally. If I got a flashlight, I could see into my laptop.
    I was just wondering if this piece of plastic (that also surrounds all of the keys and touch pad) could be replaced?
    It isn't a cleanliness issue. It is an overuse issue. I love my MacBook. It would be awesome to replace it and have it appear like new even though it is two years old.

    You can get it replaced but I don't know how much it would be.

  • Hot palm rest on Satellite L850-166

    Hi
    I have a L850 - 166 and on the palm rest it is getting red hot infact my hand is feeling sore from it.
    Any advice would be welcome.
    Thanks

    As i said i have the L855-188 , but do like it, apart from the speaker sound quality is poor, My nephew brought round his new sony vaio s , and the speaker on that are even worse.
    I do like the keyboard, it`s very firm no springiness, the display is nice also, I would have liked an hdd indicator though, the build quality is very good, the software update util is rubbish it tells you to update your bios even though you have the latest version, and other updates not even for your notebook.
    My notebook came with an 750gb toshiba hdd, which i removed and cloned before even turning the notebook on and installed an crucial m4 128gb sdd.
    The fan is quiet and even turn off when the notebook is idle.
    My biggest gripe is i cannot use the latest AMD video driver, if i install one i loose the brightness control, It looks like Toshiba has done something the the video driver, so only their version works :( not happy.
    John.

  • I love the keyboard the palm rest is loose and clicking

    I have 3 month old macbook and as you know the palm rest is a separate layer from the glossy shell. these pieces seem to separate and click. it is extremely annoying when typing. is there anything i can do

    Hello,
    That's a simple fix. Take it into Apple to have them tighten the palmrest, or do it yourself (carefully) using a screwdriver.
    The way to do it is to slightly loosen the two screws on the front right side, then push the palmrest down, and then tighten the two screws that you just loosened. Don't over-tighten the screws, as you can permanently damage the casing. If the front left side is loose, it's slightly more complicated because the two screws on that side are for show only. (They are just there to look symmetrical.) The screws for tightening that part is under the battery. You'll notice that there are *many many* screws under the battery, but you don't have to use all of them. I forgot which exact ones hold the lid to the case. Anyhow, the process is the same: slightly loosen, adjust, and then carefully tighten the screws.

  • X230 8 nubs on the inside of the lid at the top, damaged the palm rest and has created a large chip.

    The 8 little bumps you put on the inside of the lid at the top, have damaged my hand rest to the point where it is chipping significantly;
    Do the warranties cover this? This is just regular use sorts of things I get from opening and closing my lid.

    Hi Akiva,
    Welcome to Lenovo Community Forums!
    As per the query we understood that the issue with palm rest on your ThinkPad X230.
    We request you to provide the snapshot so that we can verify and assist you further on the issue. If the system is covered with ADP (Accidental Damage Protection)
    About Posting Pictures In The Forums
    Best regards
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Black Dots on Palm Rest

    Hello,
    I am currently using a Macbook Pro with Retina Display. I have been using it for roughly a year.
    Today, I discovered that there are black dots on the palm rest, the part next to the track pad. What's peculiar about them is that they are not erasable or cleanable.
    They are definitely not dust, and seem to be embedded into the aluminum chassis.
    I am guessing that it's aluminum rust or something like an oxidation reaction.
    So my questions are:
    1. Is there any way to remove them?
    2. Is there any palm rest cleaning method that you would recommend?
    3. Would it be safe to use a palm-rest guard or a protector (considering Moshi products) in this situation?
    Thank you in advance.

    Macbook Retina 13 Haswell User wrote:
    1. Is there any way to remove them?
    Probably not.
    2. Is there any palm rest cleaning method that you would recommend?
    No.
    3. Would it be safe to use a palm-rest guard or a protector (considering Moshi products) in this situation?
    Yes.
    What you have experienced is your body chemistry is such that it reacts with the MBP case causing this phenomenon.  These spots are etched in your case and the only remedy is to replace it, a somewhat impractical solution.
    Ciao.

  • My palm rest clicks the trackpad mouse button!

    Every time I put any pressure on the right palm rest above the optical drive on my 15" MBP C2D (with where the meaty part of my thumb would naturally rest), the aluminum flexes and clicks my mouse button. It's starting to bother me with random clicks when I least expect them.
    Furthermore, if I press down on the right side of the palm rest near the right arrow key, there's a noise/feeling similar to how your shoes feel on a sticky, soda covered floor.
    Does anyone else have this fit and finish issue?

    No, although this does sometimes happen. Contact AppleCare and explain your situation and most likely you'll get it fixed.

  • 13" rMBP Late 2013 Warm Palm Rest

    Hi,
    This is my second 13" rMBP Late 2013 (i5 2.4GHz, 8GB DDR3, 256GB SSD, Retina 13"). I exchanged the first one only to get a US keyboard instead of French Canadian. On the first one, I never noticed the warm palm rest... on my new one, it feels quite warm, especially on the left side. iStat says the palm rest is at 32C when idle, and during a stress test (100% CPU), it got to 35C. Reviews talk about 28C idle and 32C at full load.
    Is it often like this or I should exchange it? Am I the only one with this issue?

    that is normal when playing games or doing other intensive things on a mac.  It wont damage it, the mac would shut off before it started to get so hot it might cause damage.

  • L420 Pressure on Palm Rest Crashes Computer

    Originally I thought this might be a hard drive problem.  So I just put in an SSD and the issue pursists...
    When pressure is applied to the left hand side of the palm rest, near the Windows 7 sticker, the screen starts to flash wildly, while horizontal colored lines bouncing all over the screen and then the latop shuts off entirely.  I first noticed it when I went to transfer the laptop from my lapt to the table.  But it can happen when just typing if you apply to much pressure to the left hand palm rest.
    I believe the lcd cable is right under that part of the palm rest.  Could that be the issue?  Would a bad cable cause the suddent shutdown?  I could see the bad cable causing the onscreen issue.
    Has anyone seen this before?

    An update of the issue.
    After several rounds of conversation over the phone, Lenovo finally agreed to send me the replacement palm rest, which arrived on 20 Jan 2009. I replaced the old one successfully and the computer looked good again.
    I'll ask Lenovo if they want me to send back the old broken palm rest. I think it's still worth some money as the touch pad and finger print reader still work properly.
    Overall, I'm satisfied with the output.
    Rockwill
    ThinkPad T61p 6459A12

  • Discoloration of Palm Rest

    There has been discoloration on my palm rest, and when I choose to contact apple support, it gives me the run around. How do I go about contacting Apple Support through email, to figure out how to take care of the problem. Any information would be great. Thanks.

    Make an appointment with the local Genius Bar at the Apple store. They will take care of you.

  • Black Tiny Spots on Palm Rest

    I've taken really good care of this MacBook Pro. I have one of the best bags and cases for it. I don't wear a watch and I started noticing these tiny black spots on the palm rest area that you cannot wipe off, mister clean off, erase off or anything. They are just there. They are in spots where my palms don't even go too. Does anyone else have this problem? This really bugs me since I work so hard to keep my MacBook Pro perfect and yet there are black spots forming.
    I have the Santa Rosa Version.

    This has been reported and documented [here|http://www.appledefects.com/wiki/index.php?title=MacBookPro#Corrosion_on_MBPTopcase]. Some people's body chemistry interacts with the aluminum finish, causing this pitting. Since you can't change your body and typing with rubber gloves is a drag only option would be to get some sort of covering or skin.
    If the top case is already pitted, there's no way to replace the metal that's gone, so you would have to replace the entire top case assembly. If under warranty, this repair may be covered, but don't take my word for it. For DIY'fers, [see here|http://www.powerbookmedic.com/Top-Case-Trackpad-Assembly-for-MacBook-Pro-p -16975.html]. Note that transferring the keyboard from one top case to another is a major PITA, so if it is also damaged/pitted/glossy/etc, you may want to consider replacing it at the same time.

  • Discolorization around palm rest area

    I don't know if this issue is new, I found the palm rest area (right to the trackpad) is seemingly discolorizing, it is a nickel sized shiny spot which resembles oil grease. My MBP is half a year old and I have noticed in this a few weeks ago and it seems like this is getting worse.
    Has anyone heard of this issue? Is there a way to minimize the damage and is this covered until Apple warranty?
    Thanks for answering

    It is a problem that occurs for some people either with a lot of use, constantly resting their hands in one place and/or the acids in skin secretions. As to cleaning it, care should be taken as the aluminium layer is fairly thin. I believe I read somewhere that someone tried an eraser -- safer than cleaning fluids which themselves might be corrosive.
    To minimise, wiping or washing hands might be a help (I am not suggesting that you have a cleanliness problem whatsoever -- as you will see by my location, I live in a fairly warm place and my hands sweat while I am working), also wiping the area round the trackpad with a soft cloth, plus adjusting the way you rest your hands on the computer.
    As to warranty, this just is not covered -- normal wear and tear.

Maybe you are looking for