Cracked mouse pad

Has anyone ever cracked their mouse pad on their macbook pro?

you can bring it to the apple stor and depending on how bad the crack it could be fixed for less than 30$. i fixed mine for 25$ and it was a crack down the middle.

Similar Messages

  • MacBook Pro Mouse pad issue

    When I bought my mac book pro I bought apple care along with it. The guy on the phone told me that apple care will cover some physical damages as well thats why I paid for it. Now unfortunately, my touchpad is cracked( I am not sure why). When I went to apple store in Mission Viejo, CA, the technical assistant was rude with me and said he can not help. I bought apple product not because of the technology but for the customer care but I have to mention I had a worst experience of my life. I don't want to pay for my touchpad because I have apple care which is useless. I am not sure what to do now.  

    Typically, most anything that's "cracked" - whether it's a cracked screen or keyboard - is thought to be the result of abuse. A touchpad rarely moves much, and they're hard to "crack" (unless something was dropped onto them). I'm not saying that your issue didn't happen just as you say, only that your main challenge is to prove it.
    A mouse pad/track pad is typically touched or tapped, so this makes cracks harder to prove.
    Applecare doesn't cover user caused damage; that's where your property's liability insurance comes in. Saying that you don't know how it happened isn't good enough; the Apple rep won't believe you until you show how the crack could have happened.
    There have been incidents like this. Search the web ("mac mouse pad crack") and assemble your evidence. Then, based on this, go back to the Apple Store with your case.

  • HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

    I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

    i try to download now, do you think when i download and install the windows support software, can i fix the problem?

  • Problem with LiveDock and Mouse Pad

    Hi,
    I write from Spain. When I use mouse pad with Livedock with my Xperia Arc S, both mousebuttons open apps. Before, with Android 2.3.4, left one was accept and right one was go back.
    Will Sony solucionate this problem?
    In other order, I can´t use usb masive storage with Livedock. How I have to connect it? Where can I see files of the usb in my Arc S?
    My Android version is 4.0.4.
    Thanks.

    I’ll start with this question, what format is the external storage you are connecting to?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • I updated to firefox 4 on my laptop (a touchscreen capable HP tx2z) and now I can't use the scroll on my mouse pad, I have to use my touch screen to scroll.

    My computer is running windows 7, it's an HP tx2z touch screen laptop. My mouse pad scroll doesn't work on firefox 4. Also some features seem to missing such as the condensed menu bar and tab sorting that was spoken about in the introduction to firefox 4 video.

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode?

    Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode? Grab a drink and let me tell you my story.
    I purchased two computers... an iMac 27" i7 3.4 16GB RAM and a Mac mini 2.3 i5 8 GB RAM. Both have Thunderbolt capability and are in fact connected by thunderbolt. I have 3 problems...
    1. My Mac mini WILL NOT recognize any bluetooth keyboard. Let me back up for clarification. I set my iMac up first. No problems there. I then went on to set up my mac mini. A couple of interesting things happened concering bluetooth activity. First thing is that the keypad, which was already paired with my iMac wouldn't be recognized by the mac mini, and yet my bluetooth mouse which was paired with my iMac became paired with my mac mini and thus wouldn't be recognized by my iMac anymore. I had to go to my back room and dig out my other bluetooth mouse so that my iMac would at least recognize my second mouse. So now I have two "mice"presently. One for the mac mini, the other for the iMac. Thankfully I also had a USB keypad for my mac mini. My bluetooth keypad is still paired with my iMac but won't pair with my mac mini, which brings me to another question....
    2. CAN 1 KEYPAD AND 1 MOUSE PAIR WITH TWO DIFFERENT COMPUTERS SO THAT WHEN I GO INTO TARGET MODE VIA THUNDERBOLT I CAN USE THE SAME KEYPAD AND MOUSE FOR BOTH COMPUTERS? Anybody have some thoughts on that problem?
    3. WHY IN THE WORLD IS MY MOUSE CURSOR DISAPPEARING EVERYTIME I EXIT TARGET MODE VIA PASSWORD AND COMMAND F2. I'm using target mode to access my mac mini. But when I exit target mode to get back into my iMac I'm looking at my iMac screen but I can't see the mouse pointer! I can move the pointer around even though I can't see it. Wierd. And this has apparently been going on for some time with other users for over a year. I am presently completely up to date on Lion updates. Both systems are running 10.7.4. Does anyone have a solution or heard a rumor of a solution coming soon regarding the invisible mouse cursor "curse". I hate having to restart my iMac everytime I exit out of target mode just so I can get my mouse cursor visible again.
    Food for thought.... Wouldn't it be really cool to have a target mode capability to see your other computers desktops in seperate window screens on your main display. You then could go back and forth from each window by just double clicking or by certain key commands. You could drag and drop from desktop to desktop. Tell me this is coming soon.
    Thanks

    There was a duplicate post of this question answered at:
    http://exchange.ni.com/servlet/ProcessRequest?RHIV​EID=101&RPAGEID=135&HExpertOnly=&HFORCEKWTID=8448:​5&HOID=50650000000800000065190000&UCATEGORY_0=_26_​%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%2​4_13_&UCATEGORY_S=0

  • How come I can no longer scroll down via my laptop mouse-pad with Firefox 4.0?

    You know how you can use the mouse-pad on a laptop to scroll down on a web-page? I used to be able to do that in in the one before 4.0, but no longer can...anyone else have this problem?

    Since today the scrolling started to work for me. Was there a fix auto installed? I havent updated anything that I know about.
    I might have uninstall an old Java JRE, don't remember when I did it, could that have done it?

  • Mouse Pad is not working properly while plugged in of Probook 4530s Notebook????

    1. Product Name and Number
    HP Probook 4530s (Intel Core i5). RAM 6 GB, Hard 750 Gb, Radeon 1 GB card,
    Mouse PAD configs ............Synaptics luxpad v7.5,,,,,,,,and........Synaptics luxpad buttons v7.5
     Operating System installed: 
    Windows 7 64 bit Proffessional.
    Everytime I plug in the charger, the mouspad starts hanging................What is that........???? Sometimes it stops working at all..............One thing to note is that right and left click buttons are working fine.........
    Any suggestions......???

    By hanging do you mean it just gets very slow to respond? This only happens when you plug in the charger? I would make sure all your drivers are up to date. Do this happen when the computer is running off battery?
    Thanks
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Mouse pad virtual wheel not working in bookmarks menu

    Hi,
    My laptops mouse pad wheel does not work in the bookmarks menu. It works fine in any other application or on the main view in firefox. I'm not very organized and have hundreds of bookmarks, it's frustrating to have to wait for the up/down buttons in the bookmarks menu to scroll.
    I've read https://support.mozilla.com/en-US/kb/Cannot+scroll+with+mouse+wheel+or+touchpad
    which did not work.
    Here are my specs. I won't dump the entire dxdiag, I'm sure there's a lot of redundant info. in it.
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
    System Information
    Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
    Language: English (Regional Setting: English)
    System Manufacturer: Gateway
    System Model: NV53
    BIOS: Ver 1.00PARTTBL]
    Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
    Memory: 4096MB RAM
    Available OS Memory: 3838MB RAM
    Page File: 1489MB used, 6185MB available
    Windows Dir: C:\windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7600.16385 32bit Unicode
    DxDiag Notes
    Display Tab 1: No problems found.
    Sound Tab 1: No problems found.
    Sound Tab 2: No problems found.
    Input Tab: No problems found.
    DirectInput Devices
    Device Name: Mouse
    Attached: 1
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Device Name: Keyboard
    Attached: 1
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Poll w/ Interrupt: No
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x1002, 0x4397
    | Matching Device ID: usb\root_hub
    | Service: usbhub
    Gameport Devices
    PS/2 Devices
    + Launch Manager
    | Matching Device ID: *pnp0303
    | Upper Filters: DKbFltr
    | Service: i8042prt
    |
    + Terminal Server Keyboard Driver
    | Matching Device ID: root\rdp_kbd
    | Upper Filters: kbdclass
    | Service: TermDD
    |
    + Alps Pointing-device
    | Matching Device ID: *pnp0f13
    | Upper Filters: ApfiltrService
    | Service: i8042prt
    |
    + Terminal Server Mouse Driver
    | Matching Device ID: root\rdp_mou
    | Upper Filters: mouclass
    | Service: TermDD

    Maybe FCP 3 doesn't provide support for mouse wheel scrolling? I can't remember and I'm not going to install FCP 3 to test that theory.
    You should be able to at least set the MS mouse driver to perform scroll wheel functions in FCP through the MS mouse preference pane (zoom in/out for example) but I don't know if that includes scrolling.

  • Do iMacs come with a mouse pad in the box?

    I know, I know, this is a silly question. But I have a glass computer desk and mice do not work on it without a mouse pad. I just wanted to know if I need to pick up one so I'm not running to wal mart so I can set up my computer when it gets here.

    No, there is no mouse pad in the box. Can't you use the one you used previously?

  • Satellite A500 - mouse pad freezes every time I go onto the internet

    Hi all,
    I have a Toshiba Satellite A500 and every time I go onto the internet my mouse pad freezes. The only option I have is to restart the computer again. This is becoming very frustrating as I do not know what to do?
    If someone can help this would be greatly appreciated. Thank you.
    Cheers
    Karen.

    Hello Karen
    To be honest I have never heard about something like this and believe you are the first one with this strange issue.
    I would like to know since when you have noticed this? I cannot imagine this issue persists from the first day.
    Do you have original preinstalled operating system?
    I can imagine the first step can be BIOS update. Is latest BIOS installed on your Satellite Notebook?

  • Mouse pad Freezes

    I bought the HP probook G1 450 less than a year ago, and i have a problem with the mouse pad , as it sometimes freeze (only moving really slowly but in one line , doesn't go up or down).
    i read online some ppl have had the same issue with windows 8.1 (after the update), and the solution is to connect an external mouse , remove the device installation and re-install so you get the last update (as its un-detectable when its the same version but with a slight difference ),i did all the steps correctly and 80% of the time its working perfectly , but then what i explained before happens, and i need to put it to sleep or just hibernate to get back up running ,Of course when am using external mouse, its working perfectly  ....

    Hi AJ 1) Have you tried to uninstalling the Driver from device manager.2) Update the Latest Bios from HP website.3) Have you tried performing the system restore to the date where unit was working fine. 

  • Macbook suddenly dies/mouse pad not working

    Hi everyone,
    I've become extremely worried about my macbook lately. I rely on it on a daily basis for work.
    Last night my Macbook suddenly died on me. I was working and all of a sudden the screen turned off and the fans stopped. I thought the battery had died. But as i picked the macbook up, it started up again and the screen went on. The disk drive made the same startup noise it makes when you first turn on the macbook.
    This similar thing has happened a few times in this last 24 hours. It seems to be getting more frequent. Sometimes, when it comes back on again, the little white power light stays off.
    As i wrote this, it happened twice, thats the most its ever happened.
    Also, my mouse seems to be double clicking everything. When i press the button on the built in mouse pad, it seems to have the effect of a double click. For example, when i click the top bar of this window once, it minimizes it - and it will not allow me to drag the window around.
    HELP! This is not good! :(:(

    By your description it does sound very much like your computer is in the process of failing and will soon be unusable at all.
    the safest thing to do t this point would be to not use it any more and remove its hard drive (very easy to do by anyone). This will keep your drive intact. You can then get the computer repaired or get another one. You will at least have your data.
    Anyone that depends on their computer for anything important such as for a business should always have a backup on the ready. Even is this means another entire computer.
    Everyone that considers their computer's data, whether music, schoolwork, videos, other personal stuff etc. should definitely have an external hard drive that they backup the internal drive onto dailey, or as often as new data is added that they would not want to lose.
    Thinking that your computer or hard drive will never fail is foolish. It doesn't matter what brand or model it is, they can all fail. This is particularly true of laptops and of hard drives.

  • HP 4420s - How to enable mouse pad ?

    Hi all, 
    I have a user that has somehow disabled the mouse pad on this unit (HP 4420s laptop). I don't have a unit on had to test what he's relaying to me. He says there is a yellow light now near the touch pad that illuminates when he is logged into his profile and the pad goes dead..also there is a screen shoot on the monitor of a track pad with a finger pointing to it with a red x over it.
    Obivously it's disabled somehow, so my question is how to enable? I've had him try (or atleast he said he did what I told him) hold top left corner of touch pad for 6 seconds and see if it enables...he said it didn't work.
    Is there any other method besides this?
    Thanks 

    I have same issue with new 4420s. Waitigfor god advice!

Maybe you are looking for

  • Issue in elementary search help.

    Hi, Facing some issue on Attaching search help directly to the screen Fields. I have a requirement that 1> Based on a screen field, I have to filter F4 for the other fields. 2> I have to populate 2 screen elements at the same time. Like: In my transa

  • Spry Accordion not collapsing properly in IE & Firefox

    My design portfolio is on my testing server. The accordion works perfect in Safari but it will not collapse in Firefox and Internet Explorer. Here is the link: http://deptart2.memphis.edu/~jwilcoxen/web_portfolio/home.php . Please help. I attached my

  • Rounded corners causes faulty justification

    This problem is best described by downloading "Faulty Justification", a CS4 document available here: i http://www.mediafire.com/?jrgmsxdm0mn The page was layed out InDesign CS and converted to CS4. There was never a problem with it in CS. This is the

  • Can't configure Airport Extreme with IP 192.168.0.1 after software update

    Hi there, after updating my ax with utility software 5.3.1 and firmware 7.3.1. The software didn't allow the dhcp configuration to stay at IP range from 192.168.0.40 to 192.168.0.200 The message said that this is not a valid IP. The configuration was

  • How to create a RMI/JRMP service

    I created a construct of my RMI/JRMP following the example: ClientReceiver, Customer, QueryServer, ClientReceiverImplementation, CustomerImplementation, QueryServerImplementation, and so on. then i made the stub and skeleton(rmic -d ...). compilation