Cracked my mac pro screen can i get it fixed

cracked my mac pro laptop screen can i get it fixed

Welcome to the Apple Support Communities
Of course, but as accidental damages aren't covered by the warranty, you will have to pay for the screen. Take the MacBook to an Apple Store or reseller to get your screen replaced

Similar Messages

  • On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

    On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on?  Thank you.  Ed

    Welcome to the Apple family!!!! 
    How can I cause the VO cursor(box) show-up/start?
    Press Control-Option and F5.   The F5 key is located on the top row of keys 6th key over.  This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
    How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
    How to read a website with VoiceOver
    Step 1:  Go to the Website
    A quick keyboard shortcut is Command-L.  This will jump you up to the address bar.  Start typing where you want to go.  i.e "www.thewebsite.com"
    Step 2:  Working with Webpage
    VoiceOver will automatically start reading the website.  You can pause the speech by hitting the 'Control Button'. 
    If VoiceOver does not being reading the webpage, then you might have to "Interact" with it.  If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
    Use Control-Option-Right Arrow to move throught the website.  This will speak "EVERYTHING" on the page.
    Most website that I've found have their articles labeled as 'Heading'.  You can jump from heading to heading, by pressing Control-Option-Shift-H.
    If you'd like an itemized alphabetical listing of the site, press Control-Option-I 
    Press Control-Option-Space on the link or article you want to view.
    Step 3.  Reading from Top to Bottom
    Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title. 
    After finding the title, press Control-Option-A will start reading from the title on. 
    Note:  If there are any other items (ads, pictures, etc) it will read those too. 
    Tip:  You might be able to activate a feature called the 'Reader'.  The Reader isolates the article and elimanates the ads  The keyboard command is Shift-Command-R.  You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'. 
    I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
    You can find this information under the 'Apple menu' in the Menu Bar.  To access the Menu Bar, press Control-Option-M. 
    Go to Apple Menu > About This Mac.  This will open up another window.  Use Control-Option-Right Arrow until you hear 'Version'.  If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks. 
    Recommanded Articles. 
    AppleVis- Commonly used Keyboard Commands
    Chapter 2: Learning VoiceOver Basics
    Chapter 6: Browsing the internet
    Apple Accessibility Resource Page
    The  'Commands Help' Voiceover Menu. Control-Option-H-H.  (hit H twice)  is my best friend.  It's a searchable VoiceOver Menu with most of the VoiceOver command.  Example:  You are looking for the 'Read Current Paragraph' keyboard command.   Press Control-Option-H-H and then type Paragraph.  It will then bring up all the commands with the word paragraph.  I believe there are three.   
    As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
    VoiceOver standard gestures
    If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
    NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
    General
    Enable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate clockwise
    Disable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate counterclockwise
    Turn the screen curtain on or off
    Three-finger triple-tap
    Mute or unmute VoiceOver
    Three-finger double-tap
    Navigation
    Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
    Hold down the Shift key and drag a finger horizontally or vertically
    Move the VoiceOver cursor to the next item
    Flick right
    Move the VoiceOver cursor to the previous item
    Flick left
    Move content or the scroll bar (depending on the Trackpad Commander setting)
    Three-finger flick in any direction
    Go to the Dock
    This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
    Two-finger double-tap near the bottom of the trackpad
    Go to the menu bar
    Two-finger double-tap near the top of the trackpad
    Open the Application Chooser
    Two-finger double-tap on the left side of the trackpad
    Open the Window Chooser
    Two-finger double-tap on the right side of the trackpad
    Jump to another area of the current application
    Press Control while touching a finger on the trackpad
    Interaction
    Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
    Touch (includes tap or dragging)
    Select an item
    Double-tap anywhere on the trackpad
    You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
    Start interacting with the item in the VoiceOver cursor
    Two-finger flick right
    Stop interacting with the item in the VoiceOver cursor
    Two-finger flick left
    Scroll one page up or down
    Three-finger flick up or down
    Escape (close a menu without making a selection)
    Two-finger scrub back and forth
    Increase or decrease the value of a slider, splitter, stepper, or other control
    Flick up (increase) or flick down (decrease)
    Text
    Read the current page, starting at the top
    Two-finger flick up
    Read from the VoiceOver cursor to the end of the current page
    Two-finger flick down
    Pause or resume speaking
    Two-finger tap
    Describe what’s in the VoiceOver cursor
    Three-finger tap
    Change how VoiceOver reads text (by word, line, sentence, or paragraph)
    Press the Command key while touching a finger on the trackpad
    Rotor
    Change the rotor settings
    Two-finger rotate
    Move to the previous item based on the rotor setting
    Flick up
    Move to the next item based on the rotor setting
    Flick down
    To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
    Assigning VoiceOver commands to gestures
    If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
    Learning about keys, keyboard shortcuts, and gestures
    Sorry lots of information.  Enjoy.  You

  • I have a new mac pro and can't get a side scroll bar.  What can I do to get this?

    I have a new mac pro and can't get a side scroll bar.  How can I get this?

    The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
    In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • I get ipad mini 3 weeks ago and unfortunatelly had an accident and broke the screen. can i get it fixed?

    i get ipad mini 3 weeks ago and unfortunatelly had an accident and broke the screen. can i get it fixed?

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th, Air
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iCracked - Broken iPhone, iPod or iPad
    http://www.icracked.com/
    iReVamp Electronics Screen Repair ($99)
    http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
    Do It Yourself iPad Repair
    http://www.ifixit.com/Device/iPad
     Cheers, Tom

  • Just bought a Mac Pro, how can I get 5.1/DTS out of this thing?

    What do I need? I have a small office, don't need a high end sound system. Just something to give me good 5.1 when playing a movie (or very rarely, a game).
    Thanks,

    Whoa whoa whoa.
    Hold up here. There are a few very important things
    to know about the Mac Pro and Surround Sound.
    Mac Pro's (and the Quad G5's for that fact) do not
    have PCI Slots. They only have PCI-E (PCI Express)
    slots, and thus, there are currently NO sound cards
    available that will work in your Mac Pro to provide
    surround sound. M-Audio does not make a PCI-E Sound
    card, so do not buy a PCI card- it won't fit. There
    is nothing you can do about that until M-Audio comes
    out with a PCI-E Sound Card for the Mac Pro.
    You're right - I checked/verified this with M-Audio's tech support. Bummer.
    Your onboard sound jack on the MP will output 2
    Channels of audio (left/right). This is not surround
    sound.
    Didn't think so....
    Your onboard Optical jack will output 2 Channels of
    Digital audio from any application, game, or movie.
    I thought perhaps this optical out would output 5.1 - bummer.
    Any DVD that has a Dolby/DTS Surround Sound (5.1)
    audio track (most do these days), can be played via
    the Mac Pro's Optical port as a Dolby/DTS Audio
    stream, but you REQUIRE an external decoder such as
    an Amplifier.
    I was afraid of that.... Can anyone suggest a good, very small form factor decoder that would fit well under/on a desk or behind a computer, or hidden somewhere out of sight?
    This will give you surround sound via a DVD, only
    because the sound is pre-encoded in the Dolby/DTS
    format.
    DVD's are my main concern - I'm not big into games myself.
    Games will not be able to "encode on the fly" a
    surround sound into a Dolby/DTS audio signal, so you
    cannot get surround sound from the Optical port.
    As far as a Dolby compatible unit goes for the
    outside of the computer, I would suggest the Logitech
    Z5500's. They have a nice little control-center that
    handles the optical DTS streams and plays 5.1 Sound.
    The system is fairly compact, save for the 10" Sub
    Woofer that also has the amplifier built into it (but
    that can go on the floor).
    That answers my previous question from the sounds of it....
    Z5500's are your best bet for a cheap, nice setup for
    5.1 surround from your Mac Pro as is.
    Again, I will mention this again because these forums
    are *really* misleading when it comes to Mac
    Surround.
    -There are no PCI-E Sound cards for the Mac Pro.
    -Onboard Optical will output 2 Channels only, unless
    you play a Surround DVD Disk with the Dolby/DTS
    audio
    -Games cannot output a surround signal. Most Mac
    games do not support surround regardless of if you
    even had the hardware to do it.
    -Your only real alternative is a Firewire box that
    outputs 5.1 via Analogue cables, but even so, there
    are few games that actually support surround on the
    Mac.
    Excellent info, thanks....
    So ether way, there really isn't any point at all to
    pursue an external sound card or an internal unit.
    I'm sure M-Audio must eventually be releasing a PCI-Ex version of their Revolution card, don't you think?
    Just use the Optical port on the Mac Pro, and you
    will get 5.1 Surround. That's about it,
    unfortunately. There isn't any other solution to
    getting surround sound from anything other then a DVD
    at this time.
    -S'Captain
    Excellent post, thank you very much for the obviously accurate & detailed info.
    Mike

  • My screen crack on my ipod how can i get it fix

    So I brok the screen on my ipod touch how can i get it fix i have 1 year wareat on it and i'm woundering if it is coverd in my wareat

    Hi @twilat,
    Welcome to the HP Forums!
    I understand that you scanner bulb is to low with your HP Officejet J4680, on Windows 8.1. I am happy to look into this for you!
    Some questions for you, if you do not mind:
    Are you able to place a sheet of paper on the scanner glass and make a copy of it? Or does the printer provide the same error message?
    Is the printer plugged into a surge protector? Or Directly into the wall outlet? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you make a copy and lift the scanner lid, do you see the light bulb come on, and the scanner bar moving?
    Thank you for posting, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • TS2634 My Ipod Touch fell and cracked. It works but, can I get it fixed?

    My Ipod Touch fell on cement and now, It is not looking in good shape..It cracked. So, i was wondering if i could find some answers. Can i get it fixed or do i need to buy a new one and lose all my progress?

    If it works, make a backup. Go to Settings > iCloud > Storage & Backup > Back Up Now (assuming you have iOS 5.0 or later; if not, let us know).
    Technically, you don't need to buy a new one. You get a discounted rate for an out-of-warranty replacement iPod since this type of damage is not covered under the warranty. For exact pricing, see: http://www.apple.com/support/ipod/service/prices/
    You do not lose your progress if you have a backup.

  • I just installed mountain lion on my early 2011 mac pro i can not get my apple tv 2 to be detected for airplay

    Pretty much the title can not detect my apple tv2 through my early 2001 macbook pro that i just installed mountain lion. Im even have a apple time capsule thats both connected to these two device. My Itunes detects the apple tv and even tested itunes playing the internet radio through the apple tv but not able to mirror my macbook pro is the problem.

    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)

  • My screen is cracked and my home button is stuck down. Where can I get this fixed?

    On my iPod touch 4th G my screen broke in the bottom right corner and there are spider cracks all the way up to the top of my iPod screen. Also, now my home button is stuck down; a shard of glass probably is preventing the button from popping back up. Where can I get this fixed?

    Apple will exchange it for a refurbished one for $99, $149 or $199 depending up the capacity.
    Apple - Support - iPod - Service FAQ
    A third-party place like the following may be less expensive.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • So my Ipod Touch 4g screen cracked excedpt for the touch screen part how can i get that fixed?

    So my Ipod Touch 4g screen cracked excedpt for the touch screen part how can i get that fixed?

    Apple will exchange you iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Sometime if you make an appointment at he Genius Bar of an Apple store they will replace it at not cost.
    There are alos third-party places like:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I had an HP laptop.  Just bought Mac Pro and want to get my music and photos over into my Itunes.  Can I just open up my I tunes in my new laptop and then sync my Iphone or I pod with it and will all the music andphotos move over?

    I had an HP laptop.  Just bought a Mac Pro and want to get my music and photos moved over.  Can't I just open my I tunes in my new laptop and then connect my Iphone or I pod and sync my music into my I tunes?

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My mac pro screen has vertical lines... How much does it cost to get it fixed?

    My mac pro screen has vertical lines... How much does it cost to get it fixed?

    When you fail to give information on the exact model MBP that you have, how do you expect anyone to provide you with any specific information?
    I suggest that you go to the iFixit.com and Powerbookmedic.com and look for parts and prices.  That naturally assumes that you know what parts are defective and need to be replaced.
    Ciao.

  • I have the iphone4s and recently my screen cracked without warranty on my phone can i get it fixed?

    i have the iphone4s and recently my screen cracked without warranty on my phone can i get it fixed?

    If you didn't buy AppleCare+, iPhone 4S replacements are $199. If you had AppleCare+ it would be only $49.

  • I dropped and cracked the screen on my ipod Nano 6G where can I get it fixed

    I dropped and cracked the screen on my ipod Nano 6G - where can I get it fixed?

    At any Apple Store or AASP 

Maybe you are looking for

  • Command not found error while executing a shell script

    Hello, I am a newbie to linux.I am attaching the code which gives me following errors.. error list: 1. no such file or directory enviornemnt 2. command not found 3. ambiguous redirectline Script cd $HOME/wkdir rm /tmp/*.log # source environment . ./e

  • BDoc Error-Business partner is not a person

    HI We have a error in the  BUPA_MAIN Bdoc for only one customer that "Business partner is not a person". What could be reason for this? How this can be rectified? Thanks Prince

  • How to implement two different websites with one section that has the same content?

    I have two sister websites, each for a separate but related department in a hospital. On each of these websites, I have a main tab called library, which has about 30 pages within it for related healthcare issues. The library is the exact same content

  • Should  Standard Toolbar FIND work on an ALV within a custom container ?

    I have an ALV in a custom container on a screen. The FIND and FIND NEXT of the ALV toolbar work fine against the grid. Should the FIND and FIND NEXT of the standard toolbar also work against the ALV if they are "activate" in the GUI status? If so, wh

  • Need to test for a Hashtable key in JSTL

    What I am trying to accomplish is to test a Hashtable for a specific key and if it is there run some HTML. This is my code but it obviously wrong since JSTL yells at me when I try to execute it. <c:set var="hash" scope="page" value="${UpdateStatusDat