Cracking during playback in 3.0

Hi, first let me say that I have done a lot of research trying to fix this, to no avail.
Here's the issue:
When playing back a multitrack, there is random crackling in the audio. It's not recorded into the audio files themselves (you can see in the waveform), but when I export, some of the cracks and pops are actually there.
Also...
I have 4 gigs of ram, 2.66 ghz duo core processor, and a 500 gb 7200 rpm hard drive. When watching the task manager while audio is playing (after closing all memory hogs, Itunes, internet, etc) I can see audition jump around from 0-12 CPU usage (while every other program is 0-2), and all of the crackling coincides with these spikes.
What I'm using:
Windows Vista
Presonus Firepod
Audition 3.0
Sound Card - SoundBlaster X-FI Fatality
The crackling playback occurs no matter what drivers I use - AA 3.0 sound, ASIO4ALL, and even the firepod ones will crackle when I listen to playback through the headphone slot.
I also never had this problem when I ran Audition 1.5 on Windows XP, but I really don't want to downgrade. I have tried recording to my external hard drive, and it seems to do the same thing.
I attached a JPEG showing what my CPU usage looks like during playback.
I will kiss you if you can solve this problem, Audition 3.0 is soooooooo much nicer than 1.5!
Also interesting to note - I just installed 1.5 on this computer and ran it in compatability mode. I cannot record in 1.5 (due to some thing being out of date) but the playback it flawless. I can do all sorts of things with the processes and no static or popping during playback.

Hi everyone, thanks for all the help. Buttttt I really wanted to record something that day and ended up reformatting and going back to XP. Ever since then, absolutely no problems at all.
To answer your responses though:
I tried looking for buffer size in the hardware options, but did not even see it. I did increase the cache size (if that's the same thing, not sure) considerably, but the problem persisted.
Yes, even during edit view I would get some crackling, though not as much.
The interesting thing is I didn't even have any effects applied! I had 2 dry tracks that both would crackle upon playback. During recording, I would also get the skips in the audio. It was awful.
Anyways, thanks a lot, some really good advice here so I will stick around. I'd rather downgrade the OS and get the benefits of the real time effects editing that's available in 3.0. It must have just been a problem with audio drivers and the OS?

Similar Messages

New problem - bad cracks during playback

I'm getting back cracks and crackling during playback despite the fact that there is no obvious cause. The cracks happen when I use any effect (though my gut feeling tells me this isn't the underlying problem). I'm using UAD vst plugins but and Adobe effects but I am no where near being maxxed out, only using around 50-60% of my vst power. The cracks happen even when I use Audition's Studio Reverb or graphic eq.only, no vst.
It sounds like a latency type of cracking or the type of cracking that happens when my plugins are maxxed out (nearly 100% on my meter) but as I said, that's not it (although it goes away when I remove all effects, even Audition effects).
The strange thing is I am only working with 3 tracks!!!...2 guitars and vocal. I have many sessions with full band, easily 2 dozen tracks and not had this problem before. But with only 3 tracks...something is screwy.
When I change the latency the cracking gets worse (currently it's at 1.5 seconds).
Any ideas on how I can troubleshoot this??? My software is up to date and my system is virus checked. I'm also an experienced Audition user (years).
Thanks for any ideas.

Hey guys, my audio computer just developed this crackling on playback about 2 weeks ago.
On mastered out audio files, the crackle is not there, but on playback on new projects (started over the last 2 weeks) there is crackle in the playback on all tracks (I get crackling on playback on my speakers and on my headphones). Even individually, if I mute certain tracks.
I found some weird points when playing with new projects:
-I shut down the computer, and started Audition 2.0 again. I started a new project @ 48000 Htz and 32 bit sampling. And there was NO CRACKLING on playback (on speakers, on headphones, on mastered test audio files)
-I went back to my problem projects with crackling playback and, yup, my playback had crackling on them
-I mastered out my origional raw audio tracks (from the crackling project timeline) and put them on my new project timeline, and NO CRACKLING DURING PLAYBACK.... hmmmmmmm.
I have no idea why it's doing this.
But if your project is having playback issues. Try a full shutdown/reboot, open a new project and do a test record to see if there is crackle. If no crackle on playback, then go back to your crackling project and master out and re-import your raw audio tracks to your new project timeline
If you guys have found another work-around, or a complete fix, post up and lemme know.

Does your Apple TV pop and crack during movie playback

Does your Apple TV pop and crack during movie playback

Welcome to the Apple Community.
ahunt57 wrote:
Does your Apple TV pop and crack during movie playback
No.
Does this occur with all content.

Actions which include Set Reference Pt via Transform Panel failing consistently during playback

The title pretty much says it all. I have two different Windows XP machines, both got upgraded to CS 6 (the x.0.0 release, the Release Notes for the x.0.1 don't directly address this, but if this topic pulls up blank, I may go that route... it requires running an approval gauntlet via IT, otherwise I'd already have done it).
Repeatable problem is this:
0. Create and select an object. Even a basic rectangle will do.
1. Creat a new Action.
2. Begin recording.
3. In the Transform Panel, specify a new Reference Point that isn't the lower right (if your machines are like mine, you will get a "double hit" of the same Action step, no matter how gently you click on the new Reference Point). I say "not the lower right" for a reason in a second.
4. Feel free to make a couple other numeric transforms in the Transform Panel. I tried adjusting Width and Height.
5. Stop recording.
6. Undo back to the original state (though I suppose it isn't necessary to deomnstrate the point)
7. Run the Action.
First thing, the Set Reference Point seems to be utterly ignored, *or* sometimes it sets to the lower right and stays stuck there. I made one Action that was just a series of moving the Reference Point around a rectangle clockwise. The Action failed after the first Set and then stayed locked on the lower right for no discernible reason.
In an attempt to revisit some old Actions that were working without fail under 5.5, I loaded those. For those imported Actions, every time playback hit a step calling for a "Transform Panel," it would return an error dialog "The object "Transform Panel" is not currently available."
What in the blue blazes is going on here? Needless to say, this is taking a wrecking ball to our dozen mission-critical Action Sets, which all rely upon setting transforms to fit particular spaces automatically, precisely and consistently, and which, I might add, worked fine under 5.5.
On the positive side, the bug where movement of objects by their X,Y coordinates via the Transform Panel during Playback seems to be fixed. So, I guess there's that.
Help?
P.S. Addendum: if anyone on CS6 (16.0.0 and/or 16.0.1) can at least run through the test case above and either confirm or deny that I am crazy to be witnessing this, that would be helpful, too.

I FIXED IT!!!
How? I made a simple Action that just recorded my changing the reference point around an object clockwise, saved the Action, then cracked it open in a text editor (Wordpad, in my case).
Most of the items aren't terribly useful (for instance, Adobe, why are dialog texts in machine code rather than human-readable strings? That's be darn handy), BUT at the end of each step of the Action (called Events), I noticed that there was a variable being set to "8" every time. Yes, there are 9 possible reference points, but you need to think like a programmer/computer here. Yep, the first point isn't "1," it's "0." So, counting left-to-right, top-to-bottom gives you...
0 = Top Left
1 = Top Middle
7 = Bottom Middle
8 = Bottom Right
So it isn't the playback that's at fault, it's THE ACTION RECORDER getting it wrong. I changed that last "8" variable to a "1" and brought it back into Illustrator and ta-da! My reference point gets accurately set at the Top Middle and proceeds from there! YAY! HAPPY DANCE!
PS Adobe, YOU'RE WELCOME.

Audio dropping out during playback in timeline

Hey everyone,
I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

Having this annoying problem also. Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
Really annoying. Audio used to be so simple and untaxing to a sequence.
Adobe Premiere Pro CC 2014.1 release
8.1.0(81) Build
OSX 10.8.4
40 GB RAM
G Raid G Speed Q w/ ESATA connection
1920x1080 29.97 Progressive Scan Sequence
48Khz
Apple PRoRes 422
12 channels of audio/ only 2 of 12 monitored.
1/2 resolution on Program monitor
ADOBE.....WISH THERE WAS A SOLUTION?

IPod Nano 4G Skips During Playback with Apple Lossless Songs

My iPod Nano 4th Generation has been consistently skipping a brief portion of music about every 5th Apple Lossless song during playback. I've been working unsuccessfully to resolve this issue with tech support and fixed the problem when I disabled the energy level setting in the playback menu. While this is a hit to battery life, the skipping no longer occurs. Hoping that this issue is permanently resolved in an upcoming software update.

Hi,
I brought my ipod yesterday and had the exact same issue. it would skip certain songs frequently and was extremely frustrating. Im not sure if this is the case for all ipods (i have an ipod nano 16Gb 4th gen, with firmware 1.0.4), but i fixed my issue in a series of steps. Im not sure which exact part of my method did the job, but here it is:
1. plugged it into iTunes and clicked "restore" under the tab "summary". WARNING: This will delete everything, and restore factory settings. im not sure if this is necessary, but youll need to delete the songs which skip anyway.
2. pressed the eject button IN ITUNES (under "devices", and next to your ipod icon), ejecting the ipod. wait for the ipod to specify when it is ready for it to be unplugged. proceed to unplug said ipod.
3. Choose the language of your ipod, and go into playback settings and (settings/playback or something) and turn OFF "shake" and "energy saver"
4. Plug your ipod into your computer again and drag all the songs onto your ipod using itunes.
5. after it has finished copying, WAIT until the ipod no longer says "synching", and until it says "connected"
6. Press the eject button IN ITUNES (again, under devices, and next to your ipod icon)
7. Eject when the ipod says it is ok to do so.
As i said, im not sure which part of the method did it for me, but i think it might be the way in which i was ejecting it. Before i was ejecting the ipod on my desktop. I think it is important to eject it using itunes. Anyway this fixed my ipod. Im not sure if it will do the same to yours, but if its making you very angry (to say the least) like it made me, its worth a try i guess. I would appreciate it if people let me know if this works.

My apple tv stalls during playback. How can I fix this?

My Apple TV stalls during playback. I am hooked up through ethernet so I'm certain that it is not a network issue. What happens is that after a few minutes of normal playback the movie that I'm watching simply stalls. It looks like AppleTV is trying to reboot it. if I rewind it briefly and restart the movie by pushing play it seems to be fine. But it it stalls again after a few minutes. I have to do this very often and it becomes quite distracting when you're trying to watch a show.
One thing I have noticed is that if I pause the program before it stalls and leave it for about 15 minutes I can watch a large portion of the show uninterrupted.
The files are in my iTunes library. I don't seem to have this issue if I'm playing the files from my iPad via AirPlay. I have restarted, reset, and rebooted AppleTV several times and it still keeps doing it. Any suggestions out there?

640 x 480
Widescreen 16:9
These settings are contradictory. Please post a screen capture image of the QT "Inspector" window to confirm what encode matrix setting, PAR display setting, and Scale display settings are actually embedded in your file. Also please confirm whether or not the source material was widescreen and it is 4:3 aspect you wish to correct at this point. If not, then please state the height at which the transcoded file was encoded and the target aspect ratio at which you want files to play in all media players.
Once compressed it plays back in Windows Media Player as 16:9 video.
When played back with Quicktime it is squished into a 4:3 format.
Different players dispay content aspect differently.
Why is this happening and how can I fix it?
QT 7, for instance, displays the file using specific Scale dimensions and if these dimensions are not equivalent to PAR/anamorphic playback settings, then the file can display differently in differently media players. As to fixing the problem, that depends on which setting you are trying to fix and what platform/software is available.

Multi-room DVR Issues: Unable to locate hub, interrupted recording, skipping during playback

Hi Guys,
I was wonderng if you could help me. I have been a FIOS customer for many years and have a multi-room HD DVR and 2 HD set-top boxes. I have always had some problems during playback on some recordings where the picture and sound will skip, but over the last several months some new problems have appeared. Frequently during playback of recorded shows the recording will stop playing and I will get a message on the screen "unable to locate hub". I then have to power off the STB, reboot and when I go to the dvr option I have to refresh the devices before connecting to the dvr again. If this happens while a show is recording then the recording stops and then restarts causing the show to be split into 2 recordings. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. 1 other note that might help troubleshooting is that I can't seem to display the IMG in full screen on the dvr.
Thanks in advance for your help,
Sincerely,
Randy R.

uncorrdinated wrote:
Hi Guys,
..I. Sometimes I get a message "You have reached maximum playback on DVR". This really frustrating and I would like these issues resolved. I have the older HD dvr, 1 new hd set-top box, and 1 old hd stb. The playback issues happen on both hd stbs. We don't usually watch shows on the dvr itself so I am not sure how it performs during playback. ..
Thanks in advance for your help,
Sincerely,
Randy R.
You can only do 1 playback at a time UNLESS you are playing back from the DVR/HUB. If you want to do 2 simultaneous play backs, one of them must be from the DVR. I ran into this same message when my wife would watch a recorded program in one room and I would try to watch a recorded program in another room. Fixed it by moving the DVR to one of the rooms where the conflict occured most often. As for the "unable to locate hub" message. This was a very common problem about a year ago, which was fixed with a software update. You need to check what version software is on all your boxes.

ITunes stops during playback and won't start until I restart the computer

I'm hoping someone can help me with this. I just reformated my computer and placed all the updates and programs back onto my computer. I had iTunes on my computer before and I reinstalled it then upgraded it to version 7.3.2.6. Now I've been reintroducing music back into the library on a folder by folder method (drag and drop). Anyway, during review of the songs I will get a random issue where the iTunes just stops during playback. I have shut down the program and restarted it. I've also shut down the following programs at different times to see if it would help:
iPodService, ITunes.exe (the program), iTunesHelper, and even taskmgr.exe. Nothing seems to help. When I restart the program I click on play (any song or playlist) and nothing happens. The only thing that I have found to help is rebooting my computer. Does anyone have any ideas?
I've check the event logs and nothing is showing in there and other programs are working without an issues.
Please help!

Any suggestions on what this can be?
A dead battery. Buy a new one.

Premier Pro CC stops after 1 minute during playback.

I have beeen editing a movie shot on a Canon 5D Mark II for the past couple months. Everything has been great.... but today CC stops during playback after 1 minute. It doesn't matter where in the 30 minute timeline I click. The footage I have reviewed a million times now suddenly stops. Hitting the play button or space bar does nothing. I have restarted the program 5 times and it keeps doing this.
First time it has every done this. Please help.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Premiere Pro CC 2014 - Black flickering lines during playback and when exporting video

I am fairly new to Premiere and have recently started using creative cloud on my new MacBook Pro retina - 2.3 GHz Intel Core i7 - 16GB Memory - OSX Version 10.9.4
I shot a music video using my friends camera and all the shots were absolutely fine, I dropped them into Premiere and started editing the video together.
Some of the clips are perfectly fine during playback, although sometimes my playback stutters a little, but some of the clips have strange horizontal lines that flash through them when I watch it back. I have only used basic things such as the highlight/shadow and sharpen tools in Premiere. I thought that it maybe fine once I exported the video but when I open up the exported file on my desktop in Quicktime the little black flashes/glitches are still there in some of the shots.
Here is a screenshot you can see a line halfway between the top of my head and the top of the screen, when you watch the video there are lots of these flashing about.
Could this be something that I have set up wrong?
CPU/GPU related?
Thanks,
Jordan

Hi there,
thanks for the reply!
GRAPHICS = NVIDIA GeForce GT 750M 2048 MB
I tried that but it didn't work unfortunately, Mine was already set to the one you said, I tried the other but no change

External monitor frozen during playback

I am having trouble with my monitor not PLAYING during playback. I get an image when I scroll through the timeline but when I play - the image is frozen.. As soon as playback stops, the monitor refreshes to the correct frame - but it doesn't show during playback.
We have tried all these steps already:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
7 ) If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
What is really mindboggling is that the monitor is working in terms of giving us the correct image - just not during playback.
PLease help - thanks.
G4 Powerbook Mac OS X (10.4.4) Final Cut Pro 5

I think you may be onto something with the graphics card concept. The problem I am having only exists when I am working on an HD project. When I switched back to DV-NTSC then the monitor is fine during playback.
Yes, I am routing my external monitor through my DV deck, which is not an HD deck - so again, that could be another weak link in the chain.
This is the first HD project that I am editing, so obviously a few kinks still need to be worked out. My internal hard drive has 1.5 gigs of ram but I am not sure what the specs are on the graphics card.

Audio levels on an external monitor vary during playback when using HDMI audio

I've been having issues with movie playback using a large 1080p HDMI TV. During playback the audio level will come in strong, go faint, then go strong again, but not on any sort of pattern I could discern. It did this on three seperate movies legally purchased via iTunes. I get audio and video without trouble, its just the audio goes soft when it shouldn't.
If you remember the VHS days and "MACROVISION" encoding, then you have an idea what it was doing, although it was the audio levels, not the video playback.
Is this a fault of the system, a DRM gremlin, or something else?

I think you may be onto something with the graphics card concept. The problem I am having only exists when I am working on an HD project. When I switched back to DV-NTSC then the monitor is fine during playback.
Yes, I am routing my external monitor through my DV deck, which is not an HD deck - so again, that could be another weak link in the chain.
This is the first HD project that I am editing, so obviously a few kinks still need to be worked out. My internal hard drive has 1.5 gigs of ram but I am not sure what the specs are on the graphics card.

Photo Stills look good on the timeline but awful during playback

Not sure what I did wrong. I'm doing a slideshow of photos and some of the photos look great during playback and some look pixelated. What is the reason behind this? I remember when I did a video the video clips were coming out blurry and I found a "trick" where I had to add a high resolution clip that would set the precedent for all other clips to keep them from being blurry. But this is with photos now so I'm not sure of any "tricks".
Any help appreciated. Thanks!

The best thing I have found to do, and it goes against everything in my being, is to use bing to do a search for "HD Photo of __________."

HD footage in 4:3 timeline project comes out stretched during playback!

Hello Fellow Final Cutters,
I am doing some projections for a theatre show, and need to project in 4:3 aspect to maximize screen area on an unusual shaped screen. I am using FCP6 and monitoring onto both my Apple 20" display and/or NEC (native 4:3) projector with display settings set to 1024x768. My sequence settings are Custom size 1024x768, square pixels or PAL ratio, field dominance none, compression Animation, Photo Jpeg, or ProRes422. I've tried all combinations of this but the problem is, I can monitor the correct aspect when the frame is STILL, but when PLAYING it squeezes into 16:9.
This will be a problem when doing test projections in rehearsals, as it won't fit the custom 4:3 screen in the set. Exporting a QT displays fine in 4:3 on the external displays, it is just when playing from the FCP timeline, the image becomes squeezed.
Does anyone have any suggestions on basically monitoring a custom 4:3 sequence during playback without 16:9 distortion?
Cheers, hope you're all well
Sam

Oh, when I'm working in rehearsals its good to be able to update as fast as possible... watch a section of performance, project the images simultaneously, stop say after 30 secs, adjust image, re-render, playback from timeline, stop, adjust image, re-render, etc. Similar to editing with a client in studio, I need the display to show what the final outcome actually is on the fly.
Usually I am working in HD, projecting 16:9 or previously in SD projecting 4:3, but it seems in the crossover with FCP HD codecs there is some conflict trying to playback 4:3 using hi-res codecs (something better than SD PAL def). The included Film Academy setting (2048x1536) plays back without stretching, but this is REALLY hi res and is about double the rendering time. maybe I'll try downrezzing the Film Academy setting...

Cracking during playback in 3.0

Similar Messages

Maybe you are looking for