Cracking noises in playback during importing.

Why does my speakers crack and songs skip during importing songs from a cd, but I have perfect playback when I play songs when I'm not importing ?? Thanks to any help you can give.

Seen this?
Songs and Other Content Do Not Play Correctly

Similar Messages

Playback during import

During the import of a CD I need to pause the song and when I return to play, the playback "skips" or "studders" on all selected songs completed before the process is finished. Is this normal? After the process is finished, playback is OK.

Thanks Tom - I have a fairly new iMac 27 and beefed up the graphics with all the extra memory I could get and it seems to handle importing from tape and doing other tasks well - am only using a browser and skype for meetings.
I'm surprised you can't turn off the audio (or the video) during playback - this post seems to say it was possible in Final Cut Studio https://discussions.apple.com/thread/1963460?start=0&tstart=0
I get that it has to be playing back to capture but surely it doesn't have to show it to me or make me suffer listening to it an hour at a time. With 50 plus hours of tape to capture I might have to only do this of an evening as I need to work with audio available during the day.
Thanks for replying and letting me know it's not possible - it's really appreciated.
Kevan

No sound during import from camcorder

When I am importing video from a DV tape in a camcorder I don't hear any sound. After the clip is captured, you can hear the sound during playback. Is there a setting that allows you to hear the sound during import? I have tried importing HDV format from a camcorder and regular DV from a tape deck with the same results.

iMovie does not play sound on import. This makes sense if you consider that most current camcorders do not import in real time. They are faster or slower than real time depending on the speed of the Mac.
See if your camera has a speaker. You can listen from the camcorder.

Video Freezes Momentarily During Import

I am capturing video from my Canon GL2 into my MacBook Pro with Final Cut Express v.1.0.1. During import, video will freeze for a second or 2, but I can still hear audio. If you playback the clip once it is imported, it plays back just the same, with the video freezing and the audio uneffected. This happens almost every time I import. Any idea what I can do for this?
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

Hey Al,
I changed the Easy Setup to 48khz and it still freezes between 30 and 50 seconds into every import I do. Could this have something to do with my camera heads? Or is it a RAM issue on the MacBook Pro? I am also having problems when I try to batch capture into Final Cut Pro 4.5. It will capture the first clip, but then when it goes to capture the second clip, it gives me the error message "TAPE STILL TRYING TO THREAD". So I am guessing that the problem is most likely with the Canon GL2. Any other suggestions?
Thanks.
Jason

Making knuckle cracking noises after repair, Apple Store said it's "normal"

I sent my MacBook Air mid 2011, the first time, to an Apple Store because it failed Verify Disk and was unable to re-install OS X (Repair No.: R88048332). When I got it back and found strange knuckle cracking noises whenever I held it and moved around. I further found a few screws on the lower case were not tightened. And with a little pressure with my thumb and pointer finger, I could see the lower case near the touch pad went closer to the upper case. When I held the MBA with my right hand near the hinge and the power on key, I could hear clearly multiple knuckle cracking noises. I went back to the Apple Store, and the technician said it was normal because it's re-opened after factory assembly. Eventually they re-screwed the lower case but no improvement was made.
Has the case been bended or damaged? It's still under AppleCare so what can I do?

Yes, it's an Apple Store in Sydney, Australia.
I brought the MBA to another Apple Store and a guy there found the loudspeaker on the left side could not be aligned properly and there were other things inside to be re-aligned. He also pointed out a dented corner on the keyboard side upper-left corner (not the lower side) and a few punched edges near the ports on both side and a number of scratch marks on the top (Apple Logo) and the bottom. They were all new and not found when I took the MBA to the Genius Bar two days ago. (Before giving the MBA to Apple Store, there was no scratches or damage as inspected on the spot.)
I thought my MBA had been dropped to a hardground at the first repair service in the Apple Store. I could not think of anything otherwise.
b.t.w. It was initially a non-recoverable Verify Disk problem as reported by the Disk Utility 10.8.3 and the SSD could not re-install OS X either. That's the reason of my first visit to Apple Store. When I took it back, I found that I could not make the Recovery Disk USB and by Option restart, I found no Recovery Volume. That's why I took the MBA back to the Apple Store and asked them to re-install OS X properly. Over there, I also showed them the click and crack noise. The tecnician said he was very sure that my Time Machine backup was corrupted and thus during the restoration, the corrupted TM backup erased the Recovery Volume! (I don't believe it.) I took out the TM backup external HDD and immediately inspected it with Disk Utility, there was no problem. And later I restored the same TM backup to the MBA with no problem, and the Recovery Volume was there. I don't know why Apple Store opened the MBA's case when it was only an OS issue. and I cannot understand why a software issue will make my MBA's alumnium case clicks and cracks forever with dents and scratches everywhere!

Cracking noises when streaming videos how can i remmedy this, if it's possible?

when streaming videos on the web i get loud cracking noises. if i download the vid and then play it, it's ok

i have not tried to stream nor do i have an account to try. my vids on playbook do play for hours though.
send me a pm with login info and i could test for you on mine
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Error in phase: ADD_TO_BUFFER in SPAM during import of SAPKB70017 and 18

Hello
What is problem in this case? During import of SAPKB70017 and SAPKB70018 I get following error(there is no SLOG file in /usr/sap/trans/log):
The import was stopped, since an error occurred during the phase
ADD_TO_BUFFER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
    -   Error in phase: ADD_TO_BUFFER
    -   Reason for error:
    -   Return code: 0211
    -   Error message:
Notes on phase ADD_TO_BUFFER
In this phase the queue is placed in the transport buffer of your
system. This phases can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called. There is
     an RFC error.
o   CANNOT_ADD_PATCH_TO_BUFFER: A Support Package could not be included
     in the transport buffer. The program tp is trying to open a file in
     the file system. For more information, refer to the SLOG log file in
     the directory /usr/sap/trans/log.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.

Hi Jan,
First, check whether your STMS is configured properly. Next check the transport directory and the transport tool from within STMS (system -> check in menu options).
If these 2 are ok, then you might check from within the OS layer by manually adding to buffer (tp add to buffer <Request No> <SID>).
Also, I am assuming you are doing this from client 000 with a non-standard user having proper authorizations.
I believe this to be an issue of permissions at the OS layer.
Regards
Siva

Error occuring during import of certificate for SSO configuring in BI

Hi,
I am configuring the SSO with logon ticket for BI system.
I downloaded the certificate from portal server.
But while importing this certificate on R/3 server it shows error
"Error occurred during import"
Message no. TRUST008
Please suggest me any solution on it.
Thanks & Regards,
Vishal.

Hi Vishal,
Probably the certificate already exists - see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0077873d-0b01-0010-1abb-cfbf21d1aa43 page 4.
Hope it helps
Detlev

Everytime my phone vibrates it makes this loud noise from inside that sounds like a weird cracking noise or something help!!

Okay so I noticed a week or two ago that there was something lose on the inside of my iPhone 5s and ever since then when my phone vibrates sometimes there is this weird noise. It sounds almost like a cracking noise from the inside or a weird electrical noise. I think something is wrong with the vibrating part. Does anyone know if this is fixable or what it is?

Hello ashliz17,
After reviewing your post, it sounds like the phone makes a cracking noise when it vibrates. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
iPhone Other Repair Options - Apple Support
Apple - Support - Service Answer Center
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Unable to open the export file during Import ABAP phase on tar(System copy)

Hi Experts,
We are encountering the following error during Import ABAP phase on target system as we are performing system copy on target system as part of hardware migration(Data center migration).
Scenario:
Sourrce system - BI- ABAP(7.01), Win 2003 x64 unicode,Oracle 10.2.0.4
Target system - BI-ABAP(7.01), Win 2008 R2 unicode, Oracle 11.2.0.1
Actually on source system the data has been generated using migration monitor by using table splitting option and transferred on target system thru ftp option.
During Import process while selecting the Database installation type we have selected the installation method as "Standard systemcopy/Migration(load based)" and not checked the option "Start Migration montior Manually".
As far as my concern this error has nothing to do with this selection.please correct me If i am wrong.
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110428082000
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe -dbcodepage 4103 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(TFH) ERROR: Unable to open
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
(TFH) ERROR: OS error message: Invalid argument
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110428082003
Kindly revert with resolutions and suggestions and any hint to the oss notes as we haven't found anything specific to this error.
Regrds,
Dheeraj

\\10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
Please check if above said file located under specified path where SAPINST searvhing for it ie at
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA. if this file dont exist them it may be the case that your export is not proper.
Also check if user from which you have started this SAPINST is able to access
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA.
Thanks..
Mohit

Error importing SharePoint site collection - "there is an error during importing the Roles tag"

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

Hi, we are having trouble restoring a SharePoint 2010 site collection using our DPM 2012 installation. The recovery process goes fine (restore of the database, attach to the sql server, export into WFE's filesystem) and the last phase, the SharePoint import,
seems to end with an exception. We see this in the WssCmdletsWrapperCurr.errlog file:
Caught Exception while trying to import Url .....
Exception message =
There is an error during importing the Roles tag
Exception Stack =
at Microsoft.SharePoint.Deployment.ReadAttribute.String(....
It looks like it is a SharePoint import issue, but I'm not sure. We have tried to restore the site into an empty one, and the exception appears again, although it *seems* that the content has been recovered. We have imported using the security info
on the recovery point.
I've searched for that error message in the Net but I've been unable to find anything appropriate.
Do you have any hints?
Thanks.

Error During Import: File Could Not Be Imported

I am trying to load some .AVI movies from my digital camera into iMovie; most of them will, but 1 or 2 for some reason will not. I have played some of these videos on my old G3, which I replaced with this new computer; most loaded in OK.
The clips that won't load look smaller than the others when playing (don't know why). I played the movies and converted them to Quicktime again in MPEG Streamclip and they played fine (also in VLC PLayer, FWIW).
I am getting this error message: Error during Import: File Could Not Be Imported.
Also, I am trying to change the orientation of one clip that I inadvertently shot sideways; I did this in Bitlist but it won't load now into iMovie. Is there away to change the orientation in Quicktime (I'm not buying QT pro) or another free converter that will work?
Thanks in advance...

try to ...
* open the avi/mpegs in Streamclip
* choose 'DV stream' as export option
* in the 'DV stream' dialog, you're offered the option 'turn'.. rotate in the wanted direction and choose '75%' size to get all into the video...

Availment of 50% cenvat credit on ADC (add.duty of customs) during imports

Dear All,
I have a client requirement who wants to avail only 50% of ADC (additional duty of customs) during imports.
I observed during debugging that if I manually change the sub-transation type from IP to blank, the system posts 50% of ADC amount to AED G/L Account and rest of the amount to Cenvat on-hold account.
I wanted to ask the experts if there is any enhancement point in the program or any user exit using which I can achieve my task. If not through userexit, kindly suggest me any work-around.
Note: The above requirement is against the legal changes that are brought in during 2006-2007 budget change that unlike the CVD components, ADC can be availed 100% during the same fiscal year and therefore I request you not to suggest me to get the same clarified from the client.
Thanks
Guru Prasad

Check this answered links [import capital AED 50 % |Re: import capital AED 50 %;
[Capital Procurement in SAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f?quicklink=index&overridelayout=true]

Problem during import of 121 transport requests to productive system

Hello
We have problem during import of transport requests to productive system. Import of 121 transport requests stopped very soon in phase "N" (in TRBAT I have only one entry and in TRJOB as well).
In sm50 there is an BGD running under user DDIC in client 000 now for 14453 seconds (program SAPLSDB2). This should be import.
In SM37 I can see it as job "RDDGEN0L" with repport"RDDGENBB". Based on some literature it should perform "Converting all structure changes generated by the import and recorded in table TBATG, other than the structure changes to matchcode objects." Very interesting that TBATG has only four entries related to 2 indexes in table "DFKKOPK" , one in table "DFKKREP06" and one" ENQU" for EFKKEXC". (only this last one has not status error)
For fist two indexes I know they are not present as objects "LIMU""INDX" in any transport request beeing imported.
Also on productive system there is no"VOL" and "ZOL"indexes for table "DFKKOPK"(instead they are created on test system ie. not transported from development to test system)
Last command for that process is "CREATE INDEX "DFKKOPK~HKO" ON "DFKKOPK" ("MANDT", "HKONT", "OPBEL") PCTFREE 10 INITRANS 002 TABLESPACE PSA
PTR3 STORAGE (INITIAL 0000000016 K NEXT 0000000016 K MINEXTENTS 0000000001 MAXEXTENTS UNLIMITED PCTINCREAS"
There is enaught space on disk and in tablespaces (it is an oracle/HPux server).
Does anyone knows workaroun to solve production

are you importing these transport requests simultaneously into production?
I would suggest you try doing in smaller groups of 5 or 10 and then see whether you are able to import the requests
Rohit

Error during import of business object BOREPMA (crystal reports)

Dear Colleagues,
we have a problem with importing of crystal reports into productive system,
export works fine - I get .car files, but import finished with error : "Error occurred in data conversion".
We could not find any reason for this error..... may be someone had same issue in the past?
How can I check what happens in background during import?
Thank you very much for response

Hi Nick,
our problem is following: we changed *existing crystal report* on development workstation, and trying to import to q-workstation, as it was not possible, we made changes on q-workstation and trying to import to productive-workstation. We don't have crystal report designer on productive workstation and it is a reason why we can not create new report with same name as you suggested (on productive workstation).
In general, how should crystal reports be transferred between different systems (development, test,, productive) if you have crystal report designer only on development system? We think the export-import function can do this, but there is a data conversion error.... OSS message is created since 9 month, we don't get really solution from SAP...
Did you had the same problem or you have crystal report designer on productive workstation and can change coding there?
Thank you very much
Best rehgards
Natalia Barannikov

Cracking noises in playback during importing.

Similar Messages

Maybe you are looking for