Crackle stops after Advertising

New user to Apple TV and Added the Crackle app to the IPhone 4. Everything is up to date but have no success with Air Play from the IPhone to Apple TV.
As soon as the Ad. is finished , TV screen shows the little wheel attempting to restart the Movie but the Error message comes up, "cannot load content please try later".
Anyone have any ideas how to overcome this ?? or, what might be the cause.
Thanks.

Thanks for all the suggestions, including the restarts etc. Nothing works. Found a way around it, but it really *****.
By monitoring the progress bar and exiting Apple TV, just before the commercial break marker, I continue to watch through the commercials on the Iphone, once commercial is done, I flip it back to Airplay on the Apple TV until I get close to the next break. Real high tech eh ?
The Crackle App plays all the way through perfecfectly on the IPhone but the Advertising stops the Apple tv cold.

Similar Messages

Photoshop CC 2014 stop after a few seconds

I'm a CC subscriber and I recently updated my photoshop CC to photoshop CC 2014.
I can start Photoshop but it automatically stops after a few seconds. I've already tried to uninstall / install multiple times without any success.
When I read the file "amt3.log" in my temp dir, I can see "[ERROR] | | | | AMT | | | 7188 | ERROR: Failure Validating Product License!".
So it seems like a licensing issue.
Did anyone faced this issue?
Thanks for your help

I have the exact same error on the log file. I even tried the "nuclear solution" with no more results...
But as I tested the nuclear solution, I uninstalled Lightroom (which worked fine) and I've got the same issue, but I solved it by manually installing it (i.e without using the cc application) and it worked fine.
The installer I used for ligthroom : https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
However, I can't get my hands on a similar installer for Photoshop CC.

After upgrade to 10.8.1, Internet access stops after approx. 50MB of traffic.

I upgraded to Mountain Lion, and when I started upgrading OS components and other apps, downloads would stop after about 50MB. Once this happens, all requests in internet browsers also lost internet access. If I turn Airport off and then on again, I can access the internet but the same problem occurs again once I continue other downloads.
I have other computers and they don't suffer from this problem, so I know if is not my internet provider or my wireless network.
Any ideas?

Me too! I'm also getting display problems in emails where scrambled graphics are overlaid interactive parts of emails like dates telephone numbers!

I can´t delete files in trash. It stops after a short time undone. What can I do?

I can´t delete files in trash . It stops after a short time undone.
What can I do? There are 52 files in trash, but if I click the button "sure empty" it shows 11.313 files to delete .
I would be very greatful for your help!

Stronger medicine may be needed, but try this first
Force the Trash to empty using the Option key
This technique uses a hidden feature of Mac OS X to force the Trash to empty. Perform the following steps in the order specified:
Press and hold the mouse button on the Trash icon in the Dock. The context menu for Trash will display.
Press and hold the Option key or the Shift-Option keyboard combination,
Select Empty Trash from the context menu for Trash.
Release the keys pressed and held in step 2.
http://www.thexlab.com/faqs/trash.html#Anchor-Files-46919
You are posting in the iMac PPC forum, but it looks like you have an Intel Mac. Get Trash It if you have an Intel.
http://www.macupdate.com/app/mac/8214/trash-it!

When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one. how do I fix this? These are songs in entire albums that I have purchased.

when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Call export with java function stop after a time

Hi
we make a function java for call exp.exe.
We pass at java's function a string
we use this code
/* * ExecuteCmd.java * This is a sample application that uses the Runtime Object * to execute a program. * */
/* Import the classes needed for Runtime, Process, and Exceptions */
import java.lang.*;
//import java.lang.Process;
import java.io.*;
//import java.lang.InterruptedException;
class ExecuteCmd {
public static int Cmd(String args) {
try {
/* Execute the command using the Runtime object and get the
Process which controls this command */
Process p = Runtime.getRuntime().exec(args);
/* Use the following code to wait for the process to finish
and check the return code from the process */
try {
p.waitFor();
/* Handle exceptions for waitFor() */
} catch (InterruptedException intexc) {
//System.out.println("Interrupted Exception on waitFor: " + intexc.getMessage());
return -1;
return p.exitValue();
/* Handle the exceptions for exec() */
} catch (IOException e) {
// System.out.println("IO Exception from exec : " + e.getMessage());
// e.printStackTrace();
return 1;
after a time the export begin but stop after some time.
If the schema is little like not table but some sequence the export gone normally but if the schema is big the export stop after a time but we dont have a trace with log.
Can you help

I think you need to gobble up the output from the command you are exec'ing. If the exec'd command fills up your command space buffer it will stop when the buffer is full.
Try adding the lines
String s = new String();
while ((s = p.readLine())!=null)
after the try block to gobble up the output from your command call.

IPod Classic Starts to Sync But Stops After 5 Seconds

I'd appreciate help with this...
Two days ago, my iPod Classic stopped syncing. I don't think this is the situation where the device is not recognized. When I connect with the USB, the iPod appears in iTunes and it starts to sync but then stops after about 5 seconds. I have the latest iTunes (11.0.5) and iPod software; I re-set the iPod; and I ran a check for errors on the iPod, but it came back clean; I can't erase the latest backup in Properties because it's empty.
Here's what I don't understand - I ran a diagnostic on the connection but it was ok; when I ran a diagnostic on sync, it said no iPod was found -- even though I had the same connection when I ran the diagnostic a few seconds earlier. I know that the iPod is recognized because I can drag podcasts onto the iPod when it's connected.
Any ideas? I'd rather not have to reinstall iTunes.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK COMPUTER INC. X75VD
iTunes 11.0.5.5
QuickTime 7.7.2
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0026B5780A1E41A0
Current user is not an administrator.
The current local date and time is 2013-08-24 22:33:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 610M
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 11.0.5.5 (x64) is currently running.
iTunesHelper 11.0.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26. Device is working properly.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D. Device is working properly.
Intel(R) USB 3.0 eXtensible Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
ALLIE'S IPO (E:\), iPod classic running firmware version 2.0.4
Serial Number:       8K027FWS9ZU
Bus Speed:             61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 6.1.3
Serial Number:       C38GF4D7DTF9
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi,
I had a similar problem, all you can do at present to rectify this is to grab your playlist or new created playlist or song from the main library or playlist and drop it into the ipod tab under devices and it will auto sync the changes or songs. Hope this helps.
There seems to be a problem with the syncing of itunes 11 (mine is 11.0.5) when you just use the normal sync method. the above should work and has worked for me when transfering a playlist straight into the ipod it automatically syncs.
Regards.
Nick

Flash movies stop after a random amount of time,

The problem that I am having is that flash movie files (Every website) play for a moment or two and then stop with the little “loading” symbol turning endlessly in the center of the screen. Flash movies used to work with no problem but over the span of the last few months it went from not working well to not working at all. In a perhaps related problem sometimes downloads will stop after a certain length of time and also seem to “hang” at a random spot. If I pause the reload and then restart it the program or whatever will usually finish downloading. This doesn’t happen often but does happen. The flash movie thing, though, happens every time – no matter what browser I have tried. (Firefox, IE, IE with no add-ons, and Chrome anyway.)
I have tried solutions that I have found all across the internet, including the Adobe and Microsoft forums, to no avail. I have unloaded flash with the Adobe uninstaller and reloaded flash. I have tried various flash releases – with and without a firewall on. I have made sure that I am using the 32 bit version of IE and even tried running everything in “administrator mode.” I’ve upgraded every driver that I can upgrade. I’ve used a registry checker as a last resort. I even used the Dell partition to return my computer back to the condition that it was in when I bought it and that didn’t change anything either.
Everything I have tried has made zero difference. In the hopes that someone will have another idea for me to try I am putting all the stats for my computer that I can think of below.
Qwest internet running at 20mbps
Flash 10.1.102.64
Shockwave 11.5.9.615
Microsoft Security Essentials
Tried both IE 9, IE with no add-ons, and now have IE 8 from when I restored from the partition image
OS Name             Microsoft Windows 7 Home Premium
Version                6.1.7600 Build 7600
System Manufacturer    Dell Inc.
System Model   Inspiron 560
System Type      x64-based PC
Processor            Intel(R) Core(TM)2 Duo CPU     E7500 @ 2.93GHz, 2936 Mhz, 2 Core(s), 2 Logical Processor(s)
Graphics - Intel(R) G45/G43 Express Chipset
Sound - Realtek High Definition Audio
BIOS Version/Date          Dell Inc. A00, 10/6/2009
SMBIOS Version               2.6
Hardware Abstraction Layer        Version = "6.1.7600.16385"
Installed Physical Memory (RAM)             8.00 GB
Total Physical Memory 7.96 GB
Available Physical Memory          6.94 GB
Total Virtual Memory     15.9 GB
Available Virtual Memory             14.4 GB
Page File Space 7.96 GB

Thank you for answering eidnolb -
Answering your questions...
Have you had a Virus and if so what Anti-Virus program removed it?
No virus that I am aware of
Since you have a Dell, McAfee came pre-installed? Did you remove it prior to Installing MSE? If so, did you use the McAfee Removal Tool or just remove it from Control Panel/Programs & Features?
My computer did come with McAfee which isn't on my computer now. I used a program called "Decrapifier" that removes unwanted preloaded software that comes with PCs.
Is McAfee still Installed?
No
Do you have any Anti-Virus/Spyware programs other than MSE?
No - I have just used MSE until now. I thought about using AVAST but was't sure what running 2 virus/spyware programs would be like.
Since MSE doesn't have a Firewall, do you use any Firewall other than Windows? If so, which?
I use Windows Firewall. I have tried both adding Youtube as an allowed program and switching the firewall off enirely with no luck.
Do you use a Router? Is it Wireless?
I do have a Lynksys router that is a little older but I've also tried hooking the modem directly to the computer.
Is Qwest wireless?
I use the wired ports and not the wireless for my connection.
Other than IE8, what browsers and versions are Installed now?
I only have IE8 now. I never reinstalled the other browsers after using the Dell partition. I prefer Firefox so having to use IE is frustrating.
I've also used "RegestryBooster" to make sure that my regestry looked okay.
Thanks again for taking the time to answer. I think you are right about me doing too much - LOL

I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Why do some songs in a playlist not play, or stop after only 1 song?

I've had several playlists on my ipod that stop after playing 1 song/track, as well as skip over severl songs in that playlist. I know the tracks are good, because I can play them in iTunes, as well as play them one by one manually in the playlist.
I've restored my ipod to factory settings, then re-synced everything, and i still have this problem.
I thought the HD may have some bad sectors, so I tried running the Hard Drive scan, but that option does not show up on the I/O menu when I am in diagnostic mode. (I have a separate UNANSWERED post about this too)
Message was edited by: Tony Cappellini

You could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward. This can also work when the iPod is recognized by the computer, but not by the updater.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
To exit forced disk mode, reset the iPod.
How to reset the iPod.
You can also check the iPod's hard drive for errors using Windows ScanDisk.
Put the iPod into disk mode as previously mentioned. Go to "my computer" and right click on the iPod then select "properties", then "tools". Select the option to scan the disk for any errors.

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it?

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??

Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
If it's still stopping after that...Do the tried and tested method for everything: reset your router.

Video and audio STILL Stopping after 2 seconds

I am running Premiere Pro CS3 for Mac. For some reason, regardless of whether I capture direct fromDV cam or import a video or audio file. Occasionally (3 out of 5 times) the video and audio stops after 2 seconds. I hit space bar and it does it again. Ay ideas why?
I am running this on a brand new Mac Pro too.
Thanks,

Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Execution stops after retrieving the factory from the ServletContext while

Hi,
I just started working with Quartz, so I am clueless as to why I am getting this error. This is my first time tying to integrate Quartz 1.6.0 in a web app. I am using the JSF Framework. Although I have added the necessary jars I am still getting the error above: servlet.jar not loaded. If you follow the java code and server output you can see that after retrieving the factory from the ServletContext there is no further execution . Following is the definition of the class used for scheduling:
Quartz Version: 1.6.0
IDE : Netbeans 5.0
AppServer: Tomcat 5.5
*************************************** JAVA CODE *************************************
* BirthdayScheduler.java
* Created on May 20, 2008, 5:24 PM
package com.csg.cs.cscomwebdev.servlet.timer;
import java.io.*;
import java.net.*;
import java.util.Date;
import javax.servlet.*;
import javax.servlet.http.*;
import org.quartz.JobDetail;
import org.quartz.SchedulerException;
import org.quartz.SimpleTrigger;
import org.quartz.impl.StdSchedulerFactory;
import org.quartz.Scheduler;
* @author Arijit Datta
* @version
public class BirthdayScheduler extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.close();
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
public void init()
System.out.println(" ------------ STARTTING JOB --------------");
// Retrieve the ServletContext
ServletContext theApplicationsServletContext = this.getServletContext();
// Retrieve the factory from the ServletContext
StdSchedulerFactory factory =(StdSchedulerFactory)theApplicationsServletContext.getAttribute("QuartzFactory Servlet.QUARTZ_FACTORY_KEY");
System.out.println(" ------------ FACTORY GOT --------------");
try {
// Retrieve the scheduler from the factory
Scheduler scheduler = factory.getScheduler();
System.out.println(" ------------ SCHEDULER GOT --------------");
// Start the scheduler
scheduler.start();
System.out.println(" ------------ SCHEDULER STARTED --------------");
//Creating a job
JobDetail birthdayJobDetail = new JobDetail("birthdayReminderJob", scheduler.DEFAULT_GROUP, BirthdayReminderJob.class );
System.out.println(" ------------ JOB CREATED --------------");
//Creating a trigger
SimpleTrigger birthdayJobtrigger = new SimpleTrigger("birthdayReminderTrigger",scheduler.DEFAULT_GROUP, new Date(),null,SimpleTrigger.REPEAT_INDEFINITELY, 60L * 1000L);
System.out.println(" ------------ TRIGGER CREATED --------------");
//Scheduling the job
scheduler.scheduleJob(birthdayJobDetail,birthdayJobtrigger );
System.out.println(" ------------ JOB SCHEDULED --------------");
} catch (SchedulerException ex) {
System.out.println(ex.getMessage());
} ************************************* SECTION OF WEB.XML ************************
<servlet>
<description>Quartz Initializer Servlet</description>
<servlet-name>QuartzInitializer</servlet-name>
<servlet-class>org.quartz.ee.servlet.QuartzInitializerServlet</servlet -class>
<init-param>
<param-name>shutdown-on-unload</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>start-scheduler-on-load</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>BirthdayScheduler</servlet-name>
<servlet-class>com.csg.cs.cscomwebdev.servlet.timer.BirthdayScheduler< /servlet-class>
<load-on-startup>1</load-on-startup>
</servlet> *********************************** SERVER OUTPUT *******************************
Using CATALINA_BASE: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base
Using CATALINA_HOME: D:\Program Files\netbeans-5.0\enterprise2\jakarta-tomcat-5.5.9
Using CATALINA_TMPDIR: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base\temp
Using JAVA_HOME: C:\Program Files\Java\jdk1.5.0_02
May 20, 2008 7:27:13 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:13 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 766 ms
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
May 20, 2008 7:27:14 PM org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(D:\Java Programs\cs\CSCOMWEBDEV\build\web\WEB-INF\lib\servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.catalina.session.ManagerBase).
log4j:WARN Please initialize the log4j system properly.
------------ STARTTING JOB --------------
------------ FACTORY GOT --------------
May 20, 2008 7:27:15 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:15 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
May 20, 2008 7:27:15 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
May 20, 2008 7:27:15 PM org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
May 20, 2008 7:27:16 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 2802 ms Can anybody please help out? Where exactly am I going wrong?
Thanks a lot!
AD

Your stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time .

How to stop after first loop operation over?

Hi friends.
How to stop after first loop operation over?
I have a loop operation in module pool program.
After first loop over I want to stop.
I used the STOP keyword, but it is going to dump.
Thanking you.
Regards,
Subash

Hey,
The statement STOP is forbidden in methods and, since release 6.10, leads to an uncatchable expection during the processing of screens called with CALL SCREEN...
As they said above, use a EXIT statement to fix this DUMP...
Regards,
Diogo Carvalho

My download stops after 25 %

I have tried downloading Flash player and haven't had any problem with it until now. When I am about to download the latest version it just stops after 25% and won't keep on loading. I have tried turning the computer on and off, I have closed all other programs, I have tried different networks and WIFI's and I have tried install och reinstall flash player but nothing works. Can't use my computer properly without Flash player, please help!!!!

This morning we resolved a problem that prevented Flash Player installations from completing for some of our Macintosh users.
If you encountered this problem, please delete any previously downloaded Flash Player installer and either:
1.) Download the installer again from https://get.adobe.com/flashplayer
2.) Download the stand-alone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Crackle stops after Advertising

Similar Messages

Maybe you are looking for