Crackling Call Signal and Error Sending Messages!

Only about a two weeks ago my Iphone has started to have a really bad signal when talking to people from my apartment. I cannot ring out and when people ring me the signal is a nightmare! It even cuts off but the annoying thing is, is that the signal strength and 3g is FULL!!!! My messages usually say sending error failure and i have to turn off the phone off and on to send! I have tried resetting the network settings and resetting the entire phone but nothing!
Why is this happening???

It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

Similar Messages

Skype call failed and not sending messages

As the subject says, me and some friends are unable to send messages or make calls this morning. Messages just have the spinning symbol on the right and calls just say call failed. This is on several machine spread around the UK. Any advice is appreciated.

It seems to be slowly recovering now, just a blip in service that no one at skype are acknowledging?

No service messages and error sending SMS

I just started getting No Service messages on my iPhone and an Error sending message trying to send an Sms MSG. What's going on?

Most likely due to poor signal strength. If the iPhone does not have sufficient signal from the telco, SMS' will return error warnings.
From what these iPhone threads contain, it seems like O2 in UK, may need to look into improving their infrastructure. There appear to be many complaints concerning signal coverage.

"Error sending message" - I really need help

Hello. I have not been an iPhone user for too long, so thereas i do not know much about it. I do have an iPhone however, and everything worked just perfect up to 1 week ago. Here is what happened:
I tried to send a text message (SMS) to one of my friends, and first it said "error sending message" but then it was sent afterall, so i didnt bother. 1 day after, I could not send SMS to ANYONE else, not even an unknown number, nothing. it said "error sending message" EVERY time. What happened:
*tried to send SMS
*got the error
*lost ALL my signal
*NO SIGNAL message
*NO SIM message
*FULL signal back
*Carrier found again
The point is, that when i try sending a message, it comes up to 3/4 or so, and then shows the error and so on. it won't send ANY messages anymore
I CAN receive messages
I CAN make phone calls
I CAN send SMS from another phone
So my figure is, that the problem is the phone its self, not the SIM card. Is it making a contact??
I did a little research, and found out this:
*Many, many 1.1.2 iPhones have this issue.
*If you experience it, you may find a solution, but it's so that they do not all work on all phones (which is surprising to be honest)
*However, stunningly is that everybody are able to receive messages
What happens:
*in most cases, it happens like this:
-try to send a message
- it comes to 3/4, then stops and says "error sending message"
-phone looses signal
-phone tells you there is NO SIGNAL
-5sec later phone has FULL signal
-this is sometimes followed by a "Locked SIM" sign
what i have experienced now:
*i found out that sometimes, for some reason the message sending "comes back" tho it doesnt stay long.
*if you try to send a message, and it errors you, you hit home.. if you then go back to messages you can see the unsent one, but if you look at the number its in a format (ex): 1919<1919> or Rebecca<+2183481481>
and not 1919 only. I have seen this only in case its not send, otherwise it's 1919.
This is it. Please, I really don't know what to do, and I hope anyone of you guys that might know more about the iphone might help me. I have really tried everything!

Please, can someone help me??

Error Sending Message///please help

has everyone know this situation??already 2 month error sending message ,but i can received and make a phone call
when sending message then comes message "protocol error" or "requested facility not subsscribed" for your info am still have balance in my credit or am using post paid ////thank you very much friends
type 8320(curve)

Really, there are many users with the same problem in the forum, all of them with prepaid accounts, try with upgrading the software and let me know, here is the link
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03621&sliceId=1&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Error -34 and error -50 message while preparing a project for iDVD

I keep getting an error -34 and and error -50 message when I try to prepare a project for sharing in iMovie. Does anyone know why this might be please?
I managed to create a DVD before with this project but then went back in and changed some of the text clips to centred as they were not showing up when I played it on my TV (they were partially hidden - but that's another question!)
I also got a message that there was not enough space on the disc although it was only 1 hr 13 mins and the DVD-R disc is 120 mins.
thanks

Memory is RAM and should not be confused with hard drive space.
Open any Finder window and you will at the bottom of the window hor much free space you have. Less that about 20GB and you may have troubles.
As you have an external hard drive (and assuming that this is not also full!) move files and documents etc to that, but keep your application on the internal startup drive.
I have about 4 hours of video that I want to download onto a DVD
You can't get 4 hours of video on one DVD. Even on a dual-layer DVD that will be difficult.

My iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error-51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy phone but the person cannot receive them; however, I can send them and it sounds like they are sent, but are not received. I can get them from a galaxy.

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!

Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W.

"Error sending Message - check your ...." doesn't identify the message generating the error which is probably one which is autoforwarded.

I have an email filter which auto-forwards an email depending on the To: field. When I open Thunderbird the inbox sometimes displays emails which should have been forwarded which are not flagged as forwarded. If I then manually forward this email I get a response " email successfully sent" followed shortly after by another message " error sending message ... check your email addresses (or similar)" - Is this the same email as the one which I have just been told has been successfully sent - how can I tell which email the message relates to - has it been sent? etc etc???
Thanks for reading this far - any help would be very much appreciated
MC

Sorry Matt - 'fraid i'm guilty of not supplying all the facts ... the message arises from Thunderbird vers 9.01 running on a laptop with OS Win 7 Home Premiun SP 1. I think your reference is to problems running other email software.
Mike

Emails, Call Logs and BlackBerry Messenger messages deleted

Almost exactly 2 years from the date I got my BlackBerry Curve 8300, my emails, call logs and BlackBerry Messenger messages keeps getting deleted without notice. The BlackBerry then stalls until I remove the battery and I log on again. Can anyone help me idetify the problem and how I can resolve this?
Solved!
Go to Solution.

HI and Welcome to the Forums!
Wow -- 2 years without an issue on a computing device! A record! Excellent! Here are some KB's that might be helpful:
KB14213 Call logs, SMS text messages, and email messages are deleted on the BlackBerry smartphone
KB14320 How to maximize free space and battery power on the BlackBerry smartphone
KB15345 How to qualify low memory situations on the BlackBerry smartphone
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
Hopefully something there will be useful.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3694 When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

What model iPad and what version of iOS is it currently running?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Message was edited by: Texas Mac Man

I keep getting and "error 2 message" when trying to update my creative cloud

Hi, I was trying to update my cc and keep getting and "error 2" message. Can anyone help me?
Thanks

sign out and then back in to your cc desktop app, Sign in, Sign out | Creative Cloud desktop app
if that fails, attach a screenshot of your error message.

Hide outgoing email window and the "sending message" info box

Is it possible to hide outgoing email window and the "sending message" info box automatically after we hit send?

not reliably.

HealthCheck operation fails on mcsmgr.log and Error sending DAV request. HTTP code 600, status on Data transferservice.log

Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
Regards

I have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 ===

Email error sending messages

This evening I can no longer send messages (hotmail) from my iPad. When try to send a message I get "Cannot send mail. An error occurred while delivering this message". I can send email from my laptop, I can receive emails on my iPad, just can't send. I have power cycled the iPad, deleted and added the account back, no luck. I have no idea where to go from here ...

Hi TractorMaine,
Welcome to the Support Communities!
The article below will walk you through the troubleshooting steps for email on your iPad:
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
I hope this information helps ....
Have a great day!
- Judy

Crackling Call Signal and Error Sending Messages!

Similar Messages

Maybe you are looking for