Cracks and Noises with Channel-Strips in L 7.2 and MacBook Pro 17"

I am using a MBP 17" and have "performance-problems": when I choose a single Channel-Strip (like "11 Ethnic/Breathy Harp"), the performance-control shows only one CPU working near 90% (the right one) and I'm hearing cracks and noises. I've tried without Fireface (intern) - same problem. I can't believe, that this "incredible machine" isn't able to run one single Channel-Strip at a time without problems!!!
Anyone ideas?

Hi Marty, thanks for your imidiate reply! Though your information about sculpture is very helpful I unfortunately have the same problem with CST like "01 Pianos/Concert Hall Grand Piano" wich is from the exs24 instrument. A further problem is, that the performance control in logic show just one cpu working while the other indicator does nothing. I compared to the performance control of MacOS: there the indicator show both CPUs are working - strange, isn't it?
Regards
Franxon

Similar Messages

Savin' and recalling multiple channel Strips ?

is there a way to save and recall multiple channel strips ? what i'm trying to do is for example : to set up
Ultrabeat Multi which would include several Aux's and busses with indivitual bus effect etc and recall it in a New song exactly as i saved it . how do i goabout it
thx B
Mac Pro 2.66 Mac OS X (10.4.8) Yamaha MLan i88x Audio Interface

Two ways you could do it.
1: set the existing setup as a template; remember to get rid of all regions in Arrange & all audio in the Audio window. Whenever you want a new song with these settings, create it using this template.
2: at the top of each channel strip just below the EQ window is a small triangle. Click on that and select 'Save Setting As . . ' and give it a memorable name.
Do that for each channel strip you wish to save. In your new song, select the strip setting you want and everything in that channel will be opened; all FX, Ultrabeat or any other Logic synth you may have had inserted.
I hope one of these helps you.
guitarguru

Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if I upgrade to Lion and then restore from the external drive?

I ordered the disk to update to Snow Leopard. Did that so I could get the App Store. Did that so I could download Lion. After I installed Lion my MacBook is super sluggish. Takes like 6 seconds just to open a drop-down menu in Finder.
I have been backing up. Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if wipe my drive using the USB Lion OS stick (which I think I'll have to buy even though I downloaded the new OS online)? I have been plugging my laptop into the Lacie drive set on "auto" and it's been working great.
One Genius said yes "you will get everything back" but my Mac buddy says "say goodbye to most of your apps". Then a guy at the university I asked "do you have a disk image". And I said "what the **** is a disk image?".
Is the problem that I installed an OS on top of new OS without wiping the drive? Or, is my MacBook Pro too old? Do I need to buy a new one?
15-inch, Late 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Any help?

SA will indeed transfer accounts, files and apps at first start. Can do so even faster if you clone the internal HDD onto the external (just split into a partition large enough to contain it) and then use it as the source. Probably faster than Time Machine too. The safest and quickest way to do a disk image or clone is using CarbonCopyCloner (free), and it will preserve the Lion Recovery Partition too.
Since you'll have to re--download the Lion installer again, note that you can concoct your very own Lion Installer USB Stick with it prior to reinstalling and not have to pay for the Apple-branded version. See Kappy's tutorial: https://discussions.apple.com/thread/3786371?tstart=0
As for the sluggishness, I believe that a great part of the cause is that you only have 2GB RAM. Don't know if your Mac can take more but try at least to get to 4GB, if not 8GB. Should attempt this before messing with the reinstall, as this may get you what you want.

Running 6.0.2 with MAC OS 10.6.8 on a Macbook Pro and Firefox crashes and crashes and crashes and crashes. What have you done to your software? It sucks.

Running the new and improved 6.0.2 with Mac OS 10.6.8 on a Macbook Pro and Firefox keeps crashing. When I have Yahoo on my screen with MY FAVORITES on the left side I can't click on ANY of my favorites without a crash. I can hardly navigate anywhere without a crash. Have a MacBook Air running same OS and same Firefox with no problems. So what gives? What is happening and what should I do to fix this?

something similar has been happening to me for a a couple weeks (even before the most recent update, but now is definitely worse) on my 2010 MacBook Air. Firefox freezes upon startup, and then freezes maybe every twenty minutes or so when I'm actively using it, staying frozen for at least a minute or two. it drives me crazy.

Before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine."

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

I just bought an Epson Stylus Pro 3880 and the printed images look yellow. I calibrate my MacBook Pro monitor with a ColorMunki Display. I want to make sure my Lightroom print settings are correct.

This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

I have two macs in my house. One is newer and came with the os x mountain lion software and the other one needs to be upgraded. I was wondering if there is a way to take upgrade from one to the other? Should not have to buy this software again.

I have two macs in my house. One is newer and came with the os x mountain lion software and the other one needs to be upgraded. I was wondering if there is a way to take upgrade from one to the other? Should not have to buy this software again.

Welcome to Apple Support Communities
Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro with full CS5 suite. The programs were already loaded w

I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro with full CS5 suite. The programs were already loaded with I got it as a gift. Question 1. If I find serial numbers used to download programs to the old PC, can those CS3 programs be put on the newer PC. Question 2. I really want to put CS5 suite on PC machines. Is that possible? Especially since my MacBook is showing some hard drive problems.

You should be able to get the CS3 programs installed and running on the new pc since CS3 is spec-ed for Windows 7 Service Pack 1. Downloading the programs does not require a serial number. You can find them here: Download CS3 products but you will need the serial number to activate the programs. You might be able to find that thru your Adobe account online.
You will not be able to install the CS5 Mac version on a PC and you won't be able to trade it to a PC version either due to it being an older version. Trades are allowed only for the latest version (CS6)

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

No. You need a converter box like this to go with your MDP-VGA adapter:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
from HardMac.com by [email protected] (Lionel)
At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
A solution has been found, the details are given by Rémy.
These tedious beeps occur when the disc is inactive and are caused by a system
to reposition the play-back head carried out in a repetitive way.
In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
After copying hdapm into your user file, the command to enter is:
sudo ~/hdapm disk0 max
disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
max is the level of APM which is a number ranging between 1 and 254 included
the word following are preset and can used in the place a number for the level of APM
max (maximum performance) is the parameter to use to eliminate the “beeps”.
min (maximum economy of energy)
default (returns to the default setting)
The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?

Recently got a new iPod 4th gen; I had previously backed up to iCloud and subscribed to iTunes Match, and then wound up syncing the new iPod to my MacBook Pro; all iCloud tunes were downloaded to Mac but won't all sync to the iPod - any suggestions?

Recently got a new iPod Touch 4th gen; I had previously backed up to iCloud and subscribed to iTunes Match, and then wound up syncing the new iPod to my MacBook Pro; all iCloud tunes were downloaded to Mac but won't all sync to the iPod after multiple attempts, despite all songs showing properly on the Mac and multiple syncs occurring after all songs were properly reflected on the Mac. I updated iTunes Match from the iTunes Store menu as well pre-sync.
I should mention that I had previously had the library on a Dell (which is still running) and shared it on my home network. While all iTunes purchases now show in the Dell, the Mac is the device I use for all syncs.
There appears to be no rhyme or reason to the iCloud physical sync failure - some songs were legacy, some were purchased via the PC, some on the old iPod.
The Mac shows all the songs correctly and none show iCloud status -all have been downloaded, but the downloaded songs that were previously showing up as iCloud based aren't syncing to the iPod.
Is there any way to force all music being seen by my iPod as iCloud to download to so I can listen to them offline? Is there a way to force the sync from iTunes?

The "system" performed as designed. All devices syncing to one iCloud account are kept in common sync. The idea is that all such devices belong to one user. Different users should have different iCloud accounts. Once your contacts were edited, all devices were updated as well and subsequent backups (from yours and her device) reflected the changed contacts (and any other data that may have been edited like calendars). Your first task is to change your daughter over to a new account before she makes other changes.
The only way I see for getting back contacts is to restore them from a time machine backup, assuming you also have a Mac included in the account which syncs the contacts. However, I'm not sure whether time machine includes contacts from iCloud along with those that are local, "on my Mac".
Otherwise the deleted contacts are gone.

Does anybody have experiences with a Samsung SSD 840 Evo for a MacBook Pro?

I heard that the Samsung SSDs 840 Basic and Pro have problems with MacBook Pros and die after a few weeks. I bought my MacBook Pro 13 in April 2011 and want to upgrade it with a SSD now.

Partitioning makes no sense. You have a drawer full of stuff. Split it into two smaller drawers and you have two smaller drawers full of stuff.
Decide what you can store on external storage - your iPhoto/Aperture/Lightroom libraries can all be stored on externals, as can your iTunes Libraries and so on. Do you need to carry 30 gigs of movies with you all the time? You can get portable drives the size of an iPhone these days.

Cracks and Noises with Channel-Strips in L 7.2 and MacBook Pro 17"

Similar Messages

Maybe you are looking for