Cradle for iPhone with protection?

Purchased an iphone cradle to charge and sync my iphone, but it doesn't fit with the protective casing I have.
Wondering if there are any cradles out there designed to fit iPhones with these cases. Can't seem to find one.
Thanks!

Since each case has different dimensions, that would depend on the specific case, don't you think? (Any reason why you're keeping the case model a secret?)
Some cases like various SwitchEasy models come with an adapter to use in the Apple Universal Dock. Some cases have a removable lower section so that you can use the standard dock.
Message was edited by: modular747

Similar Messages

Is there a car charger and fm frequency transmitter for iPhone with IOS6?

is there a car charger and fm frequency transmitter for iPhone with IOS6?

Here is something interesting about car chargers and the iPhone 3G:
From Macworld:
On to the power adapters. Here’s the story: We learned a while back that iPhone 3G doesn’t support charging “via FireWire.” The thing is, there are lots of devices out there that don’t actually have a FireWire port, but are technically FireWire chargers because they’re sending power on the dock-connector pins that were used for power by the FireWire interface. There are a lot of reasons for this, chief among them the fact that the FireWire spec allows as much a 18 volts, while USB is a 5-volt connection. Since cars provide 12 volts of power, many if not most car-chargers used the FireWire method to send power.
However, in the interests of space and simplicity (i.e., not having to engineer for two separate power paths), Apple has dropped support for FireWire charging with the iPhone 3G. This means that many accessories won’t charge an iPhone 3G. Borchers said that Apple gave accessory developers a strong hint that this was going to happen a while ago, but he said that some companies have continued to implement FireWire-based chargers despite the warning.
But there’s some hope in sight: Borchers told me that at least a couple of third parties will be releasing converters that will pass through the dock connection, but convert the power to a USB standard. That adapter may make many of those charging devices come back to life

Jabber for iphone with CUCM 8.5

Hello,
I did the config on the CUCM for my iphone so now jabber on my iphone is connected succesfuly to the CUCM and everythings works well except desk phone intergration, I followed the process below descripted on the Cisco site but cannot understand the step below (underlined)
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#JABI_TK_E9D245B2_00
Step 1
Sign in to the Unified CM Administration portal.
Step 2
Navigate to the device page.
•a. In the Device Information section, click Device Association and search for the desk phone you want to associate with the mobile device.
(here my question is which device they are talking about? We have device profile for each user and we have mobility on our company and we can connect to any phone on our company with our profile, and in our CUCM I cannot find Device information or Device Association field??
•b. Select the device you want to associate with the mobile device, and click Save Selected/Changes.
•c. Navigate back to the End User page.
•d. Ensure that the Allow Control of Device from CTI check box is checked.
•e. Select the primary extension for the desk phone you want to associate with the mobile device.
•f. In the Permissions Information section, add Standard CTI Enabled to the User Groups list.
For 8900 and 9900 series phones, also add Standard CTI Allow Control of Phones supporting Connected Xfer and conf.
•g. Note the user ID of this user for use later in this procedure.
•h. Select Save.
Step 3
Navigate to the Device Information page for the desk phone you want to associate with the mobile device.
•i. Verify that the value for Owner User ID is the correct end user.
•j. Ensure that the Allow Control of Device from CTI check box is checked.
If this option does not appear in the Device Information section of the Phone Configuration window, the phone does not support this feature.
•k. Select Save.
Step 4
Navigate to the Cisco Dual Mode Device for iPhone page.
•l. Verify that the value for Owner User ID is the correct end user.
•m. In the Product Specific Layout Configuration section, for CTI Control Username, enter the user ID from the End User page.
•n. Select Save.
Step 5
Navigate to the Directory Number Information page and verify:
the Allow Control of Device from CTI check box is checked
the Associated Devices box displays the desk phone and the mobile device
Step 6
Restart the mobile device and the desk phone.
Thanks for your help
Bel

Hello,
By 'Use Mobile Network' I am assuming that you want to transfer the VoIP call to GSM using the Mobility Softkey on the iPhone. There are a couple of defects that you should be aware of when using this functionality:
1) CSCtu15500 - Call drop after user handoff VoIP call to mobile using Anyconnect (VPN)
2) CSCty91386 - Client can't handle send-to-mobile message
Workarounds: For the first defect, if you are using AnyConnect (VPN), please try transfer to mobile, with out using VPN. The the second defect, you must use the US English as the User Locale.
HTH,
--Vincent

I can't get me Ipod on my Iphone4 to play, it will until an error comes up saying this device is not optimised for iphone, with nothing plugged into it.

My Ipod on my Iphone wont play and I have no volume bar. I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work. I have never had the air play button and my software is the current editon.

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Downside of developing for iphone with AIR?

I've developed a few games with flash and have wanted to try my hand at some mobile apps. Most of my games are point and clicks and since I already know AS3, AIR seems to be a pretty good option.
I've asked about Android- which I plan on targeting first- and it appears a major downside is that many AIR apps woud require additional software on older phones and that the required software is a bit of a space hog.
What are the downsides for developing for iphone? Does IOS require special software to play AIR apps? Do they run particularly slowly on the iphone?

Whether Flash would be the best tool might depend a lot on whether you know Flash, what kind of game you're doing, and whether all of the features you need to do can be done. For example, if having Game Center and iAds is vital, then you wouldn't want to use Flash for the time being.
Flash based apps on iOS do include the AIR runtime engine, but it isn't an external engine that gets installed once into the system, each app would have a copy of the engine. That's good, in that you don't have to worry whether someone installing a later app might cause your app to stop working. It does mean that each app is a few megabytes bigger download than the Android equivalent.
On Android, the when a user downloads an AIR based app for the first time, they automatically get given the AIR runtime too. After that, any AIR apps that use the runtime that is already on the device only has to download the app itself, unless the app requires a later version of AIR, in which case the user is prompted to download the later version of AIR. It's not too painful a process.
People have requested that the AIR runtime be part of the APK, and I think that will be done one day, but not in the near future.

Export for iPhone with crop?

I did searchs for iPhone AND crop and iPod AND crop, but nothing came up, so...
Is it possible to use QT to export to iPhone with a custom crop? I'm starting with 1280x720 HD video from a Flip MinoHD. I would like to end up with something in a 3:2 ratio like 480x320 (either cropped to 1080x720 and then scaled or scaled then cropped to 3:2).
I can do this crop if I export to MPEG-4 and it works great. This export option, however, comes out as mp4, instead of m4v and doesn't work on the iPhone.
Any way to do this QT?
How about QT Pro?
Thanks!

Do you have any idea if I'm doing something wrong? Here's an excerpt from my email to the author (I didn't mention cropping as to simplify my question/bug report)
Since you did not describe your actual "crop" work flow for MPEG Stramclip I suspect that is where your problem lies. Basically you are going from a 1.78:1 to a 1.50:1 aspect ration. Therefore your will have to crop the left-right edges and not the top-bottom. Since you indicate want to end up with a 480x320 viewing area, try the following:
1) Select either of the iPhone presets. Since you will have to customize the dimensions, as well as, crop the file, it doesn't matter which preset you choose.
2) Back in the main MPEG-4 export window, re-set the "Other" dimensions to 569x320. What you are in effect doing is setting the target height of the output you want and adjusting the width to the nearest pixel for a 16:9 aspect ratio to match your source file and, thus, minimize any distortion.
3) Set output audio and/or video rates as desired (I normally use 1000 or 1200 Kbps for video and 128 Kbps @ 44.1 KHz for audio) and make any adjustments to brightness, contrast, saturation, volumes, etc. if desired.
4) Now activate the "Cropping" tool by "ticking" the correct box and leave the option in the "Destination" mode.
5) Now enter your left-right crop settings. These setting must total 89 pixels to be subtracted from the 569 scaled pixel width which will leave you with your specified 480x320 viewing area. How much you decide to crop from the left and right sides is up to you but must total 89 pixels. Thus you can keep the center area or chose to offset the viewing area as best suits your needs.
6) Now preview the content to be sure it is exactly what you want and if/when satisfied, select the "Make MP4" button to set up and begin your export.

Belt pouch which is a snug fit for iPhone with the bumper on?

I'm looking for a belt pouch which is exactly the right size for an iPhone with the Apple bumper on. A snug fit would be preferable because it works better when silent mode is on.
Probably a better question is - is there another phone which is the same size as an iPhone with the bumper on? Then I can look at cases designed for that phone.
Thanks for suggestions.
Message was edited by: jthg

I don't know if this is the type you're looking for, but an iPhone 4 with a bumper should fit well in a MOBO horizontal slim case.
http://www.amazon.com/Mobo-Slim-Horizontal-Carrying-Case/dp/B003RD6466/ref=cmcr_pr_producttop
BTW, I bought mine at an AT&T store, but Amazon has them for a lot cheaper. I had a soft plastic case with a back and it fit snugly in the MOBO. I am now using the free acrylic case with a back, because it is easier to out of the MOBO (smoother action).

Jabber for iphone with cucm 10.5

Hi
i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging
my question is : i will need COP file uploaded into CUCM 10.5 or already integrated and also the configuration required
regards

These guides will give you additional info on config part:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html

Adding on music for iphone with a new computer

I'm sorry for this for being a noob question, but my old computer with itunes which synced with my iphone has died - so is there ANY way I can edit all song information without having to reformat/resync with a new computer?
many thanks

You don't maintain a backup copy? This is one of the many reasons that always maintaining backup is basic.
If for some reason you did not backup ( not good), then you can transfer itunes purchases from your iphone. Without syncing: File>Transfer Purchases
You can backup your iphone ( does not include apps/music/vids/etc) to your new computer, see this article for clarification:
http://support.apple.com/kb/HT1414
If you enter at least one unique contact/calendar entry into your computer, then you should get the option to merge the data when you first sync.
It is very important to always maintain a backup copy of all important info, as computer/hard drives do not always announce their pending failure.

Best car mount for iPhone WITH case

ive tried car mounts in the past and some worked fine...until I got a case for my iphone. lots of mounts have custom fitting so that it will fit the naked iphone just fine, but i need one that works with my case on it. so i guess just an adjustable one would be good...being able to turn it to landscape would be nice as well. anyone have suggestions?

yeah but this is a custom holder for a "snug" fit...which is my problem. snug fit = doesn't fit if you have a case around your iphone. so i need one thats adjustable. im looking on amazon now and some of the reviews are so-so...so i was just wondering if there was a definitive iphone case out there.

How can I convert video for iPhone with multiple audio/subtitle? (I am using Windows)

Handbreak is available on Windows platform, however its conversion speed is too slow!
I hope there are some tools that can combine my converted video together with my audio track and subtitle, and I can select between audio or subtitle inside my iPhone 4.
Anybody can help me??

Hi,
Have you found a solution for this? Can anyone help with this?
If I have a video track with multiple alternate audio tracks how can you play this on iOS?
Thanks,
Apurva

A way to change sync computer for Iphone with out loosing everything?

Need to switch my main computer. Will I loose everything if I do so? Any way to avoid this?

Only iTunes content on your iPhone will or should be erased but won't be erased on your iPhone if you transfer your iTunes library from your existing computer to the new or different computer per the instructions included with this link along with authorizing the new or different computer with your iTunes account with iTunes.
http://support.apple.com/kb/HT1751
Photos transferred from the existing computer will be erased from your iPhone only if you select Sync Photos under the Photos tab for your iPhone sync preferences with iTunes on the new or different computer.
Photos and/or videos in the Camera Roll are not included or touched turning the iTunes sync process but a good idea to import this data with the computer before syncing as with any other digital camera.
No other data on your iPhone should be touched such as contacts especially if you don't have sync contacts with a supported address book application on your computer which is selected under the Info tab for your iPhone sync preferences.

Risk for iphone with charger

During a train travel, my charger shut down with a flash noise... Is there a risk for the iPhone ? My iPhone charge normally, without apparent problem, but may be components have been broken ?
Thanks for your help.

I would take it to an Apple store genius bar charger cable and iPhone
If you were on a train there may have been some issue with the current ,Apple will check your iPhone out and advise you

What is the best Radio app for Iphone with poor Signal

hi folks
i live in rural shropshire, UK and where there is a poor signal reception and no 3G so i was hoping if someone could tell me what is the best radio app with about 2-3 bars of signal on O2 please can someone help thx

Well, 2(.(7)5)G (GPRS/EDGE) is still sufficient for a lot of (mostly HE-AACv2) streams - they're between 24 and 40 kbps, . That is, first, check out whether there are favorite stations in the station directory of the HE-AACv2-specific radio app "Tuner2 Hi-Fi Radio". Note that there are other HE-AACv2-capable clients but this one is the best.
Below is an excerpt from the dedicated section of my all-in-one iPhone radio article, just discussing these questions. Sorry, there are no links or not any kind of formatting in the text - I just couldn't paste it by keeping them.
2.1 3G vs. 2.(7)5G vs. Wi-Fi
Whenever possible, deactivate 3G (if you have a second- or third-generation iPhone used in a compatible 3G network, that is). Why? It’s easy: I’ve made some very thorough experiments with power consumption when streaming over cellular (mobile phone) connections. For this, I’ve listened to a 31 kbps VBR HE-AACv2 stream in Pocket Tunes. I’ve measured the battery life decrease of 0.6%/minute when streaming in 3G and 0.3%/minute when doing the same in 2.75G (EDGE) and 2.5G (GPRS). This means streaming 3G consumes two times more battery than in 2.75G with a stream that, when streamed over Wi-Fi, consumes 0.18% power a minute.
This also means that, even if you have an unlimited Internet data plan, try using Wi-Fi whenever possible because it’s almost two times more battery-friendly than even 2.75G (EDGE) / 2.5G (GPRS) – and 3.3 (that is, 60/18) times more so compared to 3G.
Having to rely on pre-3G stream speeds means the following:
- If you only have GPRS connection (but not EDGE), select a station broadcasting at less than 35-40 kbps to avoid pauses and stuttering. You can easily see if your phone is in GPRS only: then, to the right of the name of your network, there is a circle and not the capital letter ‘E’ (it’s '3G' when in 3G mode and it’s here that the Wi-Fi signal is shown when operating over Wi-Fi.)
Note that, with some networks (for example, Vodafone in some? all? countries) there’s no EDGE at all. There, you either use 3G or GPRS. The latter rules out all stations with speeds over 40 kbps. If this is the case, you will most probably have to rely on HE-AACv2 (also known as AAC+) streams, should you want good audio quality and stereo sound. The other formats, MP3, AAC-LC (the two formats natively supported by the built-in QuickTime player) and WMA are completely unable to deliver good, stereo audio quality under 40 kbps; OGG is able, but around 36-38 kbps, which may result in stuttering over lower-quality GPRS connections or congested network.
You can find a lot of AAC+ streams at http://dir.xiph.org/by_format/AAC+ and http://yp.shoutcast.com/. Note that, with the latter, you will want to click radio stations with AAC+ type (see the last column). Unfortunately, unlike with collecting with MP3 stations only, you will not want to tap the header of the last, “Type” column, to order them to collect all AAC+ stations at the end of the list because it’s not possible to easily jump to the end of this list. (Tapping will only order the stations in a way that the list starts with MP3 ones; that is, stations well above 40 kbps - and the few that broadcast under 40kbps, do so with awful audio quality.)
Note that moodio.fm (which, as with the former two, stream directories, that is, xiph.org and shoutcast.com, has been introduced in section 1. Built-in capabilities: QuickTime), by default, also uses AAC+. As with the former two stations, in order to play back these AAC+ streams in an AAC+-capable radio player (the built-in QuickTime isn’t one of them) like Pocket Tunes Radio or FStream, you’ll want to copy these links to the clipboard and, then, paste them into a custom, user-defined station in these apps (as long as you don’t find a station of your liking in the built-in station directories of these radio clients). To do so,
1. in Safari, long-tap the link and, then, select “Copy” from the context menu
2. Switch to the radio station, go to its dedicated custom station entry dialog (with FStream, Favorites / Edit / Add new webradio at the bottom; with Pocket Tunes, Favorites / Edit / +) and tap the URL field a bit longer after cleaning it entirely (if there’s a http:// in it; with FStream, there isn’t). You’ll see a Paste flag (icon) as in this screenshot
3. Just tap it; the station URL will be pasted to the field
4. You can also give your station a name
(Note that you can also manipulate the favorite list of FStream via Wi-Fi, from a desktop Web browser. It offers a far faster way of adding and deleting favorites.)
Note that Pocket Tunes Radio also has a built-in Web browser. If you navigate from it to, say, m.moodio.fm or yp.shoutcast.com, you won’t need to do any copy / pasting like explained in the previous section. FStream (my other pick for HE-AACv2 playback) doesn’t have a Web browser. Note that several other (except for ooTunes, not that recommended) players also have a built-in browsers. You can do exactly the same in all of them except for eingrad’s RadioBOX, which, currently, has bugs in its Web browser: when you tap a link, the playback (if the built-in QuickTime is compatible with it) will start in QuickTime and not in the built-in player. (The developers stated they would fix this bug some time.)

How to find or bypass the password for unlock backup for iphone with mac?

Hi,
My Iphone is not working for some reason and i realy need the information that was on it.
I have a backup in my itune and i tried to download it to my ipod using the "restore from backup" option.
Unfortuanlty, it asked me for a backup password which i've never put and without it i can't get into my backup information.
Is there any way to bypass it or find the password somehow?
I've tried to find it in the keychain accses (i'm using mac) but didn't find anything there
it is realy frustrating..
Tnxs

If it asks for a backup password you or someone else put one on it. Without the password there is no way you can recover the backup.
But -- is is asking for the backup password, or for the phone password? You cannot restore a backup from one phone to another phone without the unlock code for the phone. This is to prevent someone from stealing your data.
But in general, if there was a way around a password what would be the point of having a password?

Cradle for iPhone with protection?

Similar Messages

Maybe you are looking for