Crap! I can't access audio files on my wife's profile! Can you help?
My wife purchased an audiobook of some sort from a website. It's now stored in our shared iTunes library. However, I can't get the files to appear when I'm logged in with my own profile. I already did the "Add to Library" option which is what I usually use to pull in songs that she burns from CDs while in her own profile.
Do you know why iTunes won't let me do this?
Thanks!
I figured it out.
Similar Messages
-
Accessing audio file directories more easily
Is there a way to access audio files like foley or music files more easily. Currently I locate files in the finder and drag into the FCP browser window, but would like to have a way to see the various folders in one place. Is this doable, or is there a better way to do this?
Meg The Dog wrote:
Hi =
At the finder level, just use QuickLook.
Select the file. Press the spacebar. If is is an audio file it will play, an image it will display, or a movie it will play as well.
You can use this to sample your files and preselect and screen those you want to drag into the FCP browser.
MtD
Thanks for the feedback. I had hoped there was a way FCP could allow adding folders like Motion's file browser. I know I can add the four or five folders (where I have audio content of interest) to the Finder's Places Sidebar, and sample the audio as you said, but hoped there was a way to do this from within FCP file browser, or access via a right mouse click. I am setting up a Macbook as a mobile editing station, so had hoped there was a way to view and select content without having another window (finder) up. It's less cumbersome of a process with a single monitor system. -
I just upgraded my ipad to 6.0. I can no longer expand my audio files so that I can move forwards and backwards. I used to get a diagonal arrow to enlarge the screen and then have a bar that I can move to navigate. Can you help?
Hi James,
I am listening to embedded training files on the Quick Time player (I think). They cannot be copied to protect the information. You only have the option of listening. I used to be able to click on the Q in the audio strip and it would provide a diagonal arrow and this would allow me to expand the bar to a full screen. I then had the bar which would allow me to navigate in case I wanted to listen again or in case I wanted to move forward. After my upgrade, I can no longer expand the strip to a full screen with the adjuster. Now I have not chance to take a break in listening to these audios and most of them are at least an hour long. Thanks for your help. -
Quicktime audio file to CD for playing on a CD Player can you help
I have a quicktime audio file (which seems to show as a movie?) which I have on my desktop. I want to burn it to a CD so that my uni tutor can listen to it on a CD player. Can you help. I get all the way to the burn thing in disk utilities, but it won't burn. I'm thinking it needs to be saved in another format?
Oh, thank you Martin. I've cracked it right the way to burning the file, but it doesn't play on a CD player. I definitely brought it through iTunes, but it shows on the CD as a Quicktime file. I think this may be the problem. Liz
-
Can you help with rematching file names
After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
TonyBecause this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it? -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.
See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
I use the Airport Extreme modem for my computer and wireless devices. I can't access my iphone 4 and 4S. It does not accept my passcode. My wireless laptop and wireless tower computer does accept the password. Can you help me?
You really have an iPhone question here.
Start with the Troubleshooting Guide for iOS devices:
http://support.apple.com/kb/TS1398
Post in the correct iPhone support area if you need more assistance.
Using iPhone -
I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.
In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import. It does pretty well on basic things, though.
If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
SG -
I can't drag video files to my itunes. Can you help me?
When I try to drag any kind of video files to my library nothing hapens.
Every other kind of files work
Can you help me?OK.
WMV, MPG4 and AVI at least.
Also, I cannot open any of my video files, including MPG4, with iTunes, only with Quick time player.
The version is the latest: 10.6.1
Thank you very much -
When opening a pdf file it views as garbled letters. Can you help?
Having trouble. I recieved an email with an attached pdf file and when I try to open it, it appears all garbled. I have tried opening it on my ipad and it appears fine there. On my desktop, not so well. Can you help? I have upgraded to the most current verion of adobe.
On the desktop, what is your operating system & version?
What is your Reader version?
Does the PDF actually open in Adobe Reader? -
My start got into my computer and i cant access my emails, can you help?
My start got into my computer as my browser, and it wont allow me to access my emails. Can you help me remove it from my computer?
First, try to reset Firefox. [[Reset Firefox – easily fix most problems]]. This simple step will eliminate many Firefox problems with only one click.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.
After all these steps, make sure you update to Firefox 14. [[Update Firefox to the latest version]] -
The icon wont enable and when I go to open it via "open file" some technical sentences come up that make no sense to me. I don't know what is wrong. Never had this problem before. Can you help?
Sorry, I clicked on the wrong link.
davewdan
Maybe you are looking for
-
Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?
-
Why is my drop down spry menu not working any more please?
Hi all. I created this template and tested it in Firefox not so long ago and the drop down menu was fully operational. Today, however, is a different story. I am pasting the codes below for some please as to where it has gone wrong and thanks for a
-
scenario 1: i want to track batch numbers from sales documents(delivery) i mean regarding particular customer which batches i have been assigned to him in this scenario i am storing that batch number design samples (textile industry) in my sample wa
-
Flash file entered in dreamweaver
I have created a site with a dark background in Dreamweaver and have added a flash (SWF) file into the page. However when the page is accessed through a browser, a white square flashes up before it starts loading the flash file. I have tried adding a
-
How to deploy on Oracle AS 10.1.3
Hi I tried making exporting a WAR file of a simple studio creator JSF application which has only one page. Page contains on only one label JSF component. But when I run the application after deploying the WAR onto oracle AS 10.1.3 I get this message