Crash after close the software

I open the lightroom 4 and then I decided to create a new catalog, after go in the option "File" > "New catalog" the software closes and do not open anymore, then, i search the problem e find out that the software does not really close, it stay opened in the Task Manager.
I Use Windows 7, 64bits and a powerful configuration. 8core, 16gb ram, 3gb video and Lightroom 3.6 used to work perfectly.
Sorry the bad english, brazilian here. =D

A work-around for this bug that has been suggested by others is to set your prefs to backup LR catalog each time your close the program. So worth a try.
Bob Frost

Similar Messages

Premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

premiere cc 2014 don't let me export thru media encoder its stop and close the software after few min

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

My iPhoto keeps crashing after installing the latest update, can't do anything!

My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT

Troubleshooting after reinstalling the software that came with my macbook

Hi, I'm a new user of mac products and my macbook crashed refusing to start up (it would just turn on and keep loading till froze).
I followed exactly the steps "Problem meet solution" in the little manual and had to use the Mac OS X Install Disk 1.
The disk utility repaired the HD volume (error found: incorrect block count for file flatfile.db - should have been 708 instead of 354), then still couldn't start up on HD. Did it all over again, repaired HD again (this time error: incorrect block count for file .store.db - should have been 5202 instead of 2601), but this time went further selecting "continue" and reinstalling Mac OS X from the discs that came with my macbook. Reinstalled - successfully finally - by chosing the option "previous settings archived in new file".
The only problem i had was at login ... it would not recognize my user password... which was the same one since i first turn on my new bought macbook. Anyways, i used again the disc 1, selected change my password and this time i managed to sign in with the new one (same old user).
1)NOW, question: do i have to re-update my software? Because before I had Mac OS X 10.5.2 (i always kept my computer up to date) and now, after reinstalling the software I have Mac OS X 10.5
or i should be able to reactivate them from the Previous Systems file (in this case how do i do that?
2) Can't figure still out my master password that unlocks the file vault plus i can't activate again the root admin user from Directory Utility ... i click it but doesn't do anything. Why is this and how can be sorted out?
my macbook details:
Model Name: MacBook
Model Identifier: MacBook3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: MB31.008E.B02
SMC Version: 1.24f2
Could someone help me with this? Please note it's my first time troubleshooting a computer ever and that my knowledge is not that vast in the field ... so please use simple steps/terms that i can follow.
Thank you,
Laurie

Thank you very much for answering so prompt to my questions.
1) yes, i will take all the updates. and ok, i won't touch the previous systems file
2) in regards to master password ... i tried all the passwords i ever used. not sure it's just "forgetting". Reason: as I mentioned before: The only problem i had after reinstalling the software was at login ... it would not recognize my user password... (and I add, nor the master password) which was the same one since i first turn on my new bought macbook.
As i couldn't sign in, used again the disc 1 to reset my administrator password and it did save but with the notice that i should "use the keychain access to reset the password for users login" .This time i managed to sign in with the new one (same old user). Then I went to the keychain clicked login and changed the password for keychain login. Did i do good? do I have to change something else. please let me know as don't really know.... i just follow help advice.
3)in regards to root password ... i had it also before ... using help on "security" issue ... as i connect to different networks ... i read that one could help ... please understand that i'm learning as i go, as this time i don't have someone else to do those things for me. so why doesn't it activate anymore? and why would it be better not to activate it?
4)speaking of learning, from my initial post where i posted the errors that my disk utility found ... what do u think caused my computer to freeze? i was browsing on safari facebook as well as I had both yahoo messenger and skype opened... first the messenger froze, then crushed, then i restarted it , then froze, then all the rest froze, without responding to force quit.
5) after reinstalling the software, i still have yahoo messenger and other applications.... is that safe to use now? they are still in my applications
and last 6) did I do everything correct when my computer would not start up?
thank you
laurie

After updating the software on my ipod touch to OS 6 it no longer works in my car

After updating the software on my ipod touch to OS 6.1.4 it no longer works in my car.

Try:
- Reset the car system
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem,then the iOS update broke compatibility. That happens sometimes.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software?

When I click on the button to download the new IOS software, I get a message saying that all the items on my iTouch will be removed. Will I have to reload everything after updating the software? Because I had to have my hard drive wiped a while back, I have items on my iTouch that are not in my iTunes. Is there a way to copy everything on the iTouch into iTunes, if necessary, before I load the new software?

It is possible to transfer purchases from your iPod back into iTunes before updating the OS. If you had any CDs from your personal collection, these you have to put back into iTunes manually. Hope this helps you & good luck!

Do I need to download Adobe Acrobat XI Pro again after using the software on a 30-day trial basis?

Do I need to download Adobe Acrobat XI Pro again after using the software on a 30-day trial basis?

You mean, if you now buy it? No. You can enter a license or sign in if you have a subscription and the trial is unlocked.

Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

Hi, I am trying upgrade to Snow leopard 10.6.8 from 6.3(trying to install Lion). After downloading the software i m getting a message "can not install on the HD, install 6.5 before proceeding further. I coud not understand. Any suggestions, I appreciate.

install 6.5 before proceeding further. I coud not understand.
Just what it says - install os 10.6.5 before proceeding further. You can either do so through Software Update or use the Combo update from Apple's download site.
You should repair permissions and restart your computer prior to updating and upgrading.

HT4623 i was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks

I was updating my iphone 4 wirelessly to ios7.0.2 ,after downloading the software it stated to install but i never got started again. only apple logo is appearing on the screen ....please help me out ..thanks

Hello taranpahara,
The following article provides steps that can be quite helpful in getting your iPhone updated.
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Cheers,
Allen

IMovie is crashing after creating the large movie for YouTube.

Hey Guys!
So, I have been uploading to YouTube from iMovie for several years now and today I uploaded again as I usually do. The problem was that about 30 seconds before the end of my video it went black on YouTube! I deleted it off YouTube and reuploaded but it happened again! So, thinking that it was something on YouTube's end I deleted it but the next time I tried to upload, iMovie gave me this error message: "The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )"
Now when I try to upload, iMovie crashes after creating the large movie to upload to YouTube!
I have restarted my computer, deleted items to create extra space on my disk, and ejected my iPhone so nothing else happens while I'm trying to create the large movie.
Does anyone have an idea of what is happening and how to fix it?
Thank you!

I'm having a similar problem with Imovie 11. I wonder if the problem is in the new Mountain Lion update. Fortunatly, I cloned the drive befor installing the update. I've cloned this drive back to the original startup drive and gotten back to IMovie.

TS2634 I forgot my passcode and have tried to restore, but it still asks for my passcode after downloading the software.

I forgot my passcode and have tried to restore, but it still asks for my passcode after downloading the software. What do I try now?

iOS: Unable to update or restore

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

That's exactly right. And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes). In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored. That will restore everything in the article above, which does not include your photos. But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
Regardless, it sounds like you'll be fine! Your photos will wind up in iPhoto once you place them there. They will be safe there.

TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

Hi nguyen trong thang,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden

No keypad sound after update the software into 10.3.1.1565

Hi guys..please help me. I'm using Z10, after update the software into 10.3.1.1565, there is no sound of the keypad, eventhough i have made the volume of the keypad sound to the maximum.
Is anyone has any idea or suggestion about it? Thank you.

Lots of users are complaining about issues with Contacts from OS 10.3.1 udpdate (Q10 v5).
I've tried everything under the sun (reinstalled OS multiple times, completely wiped my device, etc) and the problems still persist.
I've noticed that if I repeatedly disable and re-enable Contact syncing via Settings (and then waiting an hour or two), the Contacts will eventually appear after about 5-10 attempts, and my text messages and phone calls will show names again.
BUT, as soon as my Q10 soft resets for any reason (if battery dies, for example), all of my main Contacts completely disappear. Then I have to repeat the steps above every time.
There are a few other things I've noticed:
1) If I click "Edit Contact Folder Settings" button in Account Settings, it shows Contacts, LinkedIn AND "LinkedIn 2". I don't even have LinkedIn installed!
2) If I turn OFF the toggle switch to "Sync All Contact Folders" then click save, it doesn't actually save my settings (usually if something saves successfully, the devices seems to think for a few seconds, which doesn't happen). As soon as I go back to manually edit the Contact folders, the settings are reverted back to All Contacts.
So frustrating..

Crash after close the software

Similar Messages

Maybe you are looking for