Crash, and then no mail accounts listed

Hello,
On behalf of my uncle:
He was composing an email on his old iMac (about 6yrs old) running 10.4.1. Either Mail or the whole OS crashed (he doesn't remember) so he rebooted and launched Mail again.
Now there are no accounts listed, but it appears that all the emails are still in the Mail folder in the Library.
How should we recreate his accounts and get his old emails back in their appropriate folders? Well, I know how to create the accounts again, but how to get the emails back in their folders?
Thanks in advance.
Message was edited by: David Crandon1
Message was edited by: David Crandon1

First, Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
Try dragging this file to the desktop in case we need to put it back later, then logout/in...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
(May or may not require you to setup your account(s) again.)
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
/Users/YourUserName/Library/Caches/Mail
Move to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index

Similar Messages

Safari Crashes and then will not open yahoo.mail or gmail

Safari Crashes and then will not open yahoo.mail or gmaill
Is anyone else having these, or similar problems. i cannot log-in to my yahoo.com or onto gmail. The issue started yesterday.
The message states that it cannot secure the
connection.
Any suggestions?
I downloaded Netscape to be able to log-in into my accounts.
What a pain. I am using 10.3.9, and all was fine
thanks,
victoria

This just happened to me. Apparently yahoo mail just implemented something.. Check out this message from yahoo mail.
=================
Sorry, Yahoo! Mail Beta does not support your browser.
You can either download a compatible browser or proceed to the original Yahoo! Mail.
If you want to use the Yahoo! Mail Beta...
You can download any of the supported browsers for free by clicking the links below:
Internet Explorer 6.0 or higher (for Windows)
Firefox 1.5 or higher (for Mac and Windows)
SeaMonkey 1.0.8 or higher (for Mac and Windows)
To proceed to original Yahoo! Mail...
Simply follow the link below. If you sign in later with a supported browser, you will automatically be taken to Yahoo! Mail Beta.
Proceed directly to the original Yahoo! Mail
I use 10.3.9 and I have no idea why yahoo mail stopped working today. I have firefox installed on my machine. BTW - firefox is able to serf the web without issues on all of my sites. I often wonder why apple wanted to build a browser, why not just use firefox and contribute to it's development for the mac environment?

I just updated to 10.9.4 and all my mail accounts are now offline. Unable to send or receive mail. nothing else was done except for updating to 10.9.4

I just updated to 10.9.4 and all my mail accounts are now offline. Unable to send or receive mail. nothing else was done except for updating to 10.9.4

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Send messengers from More then one mail account...

Hi
I have more then one mail account in mail - one for private, one for work 1 and one for work 2. I want to avoid that I send a message via the wrong mail account to a person that I don't want to show that I have other mail accounts.
Is it possible to make some kind of rule that says if I send to [email protected] mail will only use mail account 1 and if I would like to send a message to [email protected] it will only use mail account 2?
I hope you understand my question
Best Lars Kudsk

It's not possible to set a rule based on recipient-since rules are only processed on incoming messages or at least those in your inbox..
You can set the default account in Mail preferences, beyond that, you just have to double check to make sure the correct account is selected.

My old laptop crashed, and took my iTunes account with it. I got a new laptop, and want to sync my iTouch to my new iTunes account. It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one! Help!

My old laptop crashed, and took my iTunes account with it. I got a new laptop, and want to sync my iTouch to iTunes. It gives me an error message stating that I can't sync to multiple iTunes accounts, but I can't access my old one!
How can I get my new iTunes account to allow me to Sync my iTouch? The only option it gives me is to "transfer purchases" from my iTouch to iTunes, but that is only about 25% of my iTunes library-most of it is CDs I have uploaded. How can I Sync without losing all my music from my iTouch???
Also, I have lectures and photos, etc. on my iTouch that I don't want to lose.
I've tried a few of the iPod copy programs-the free ones and the ones you have to pay for, but I can't find one that will work for ALL my content on an iTouch.
Right now, I can't get anything from my iTouch to iTunes, and I can't update my iTouch with my new iTunes purchases, so I'm stuck! Help!

Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on?

I have business and personal e-mail accounts with different contacts. Can I have more than one address book on my iPhone?

I have business and personal e-mail accounts with different contacts. Can I have more than one address book on my iPhone?

Set up an additional user account and use one for work and one for personal stuff - each will have a separate address book. Turn on fast user switching for easy switching between the two.
AK

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

How do I : Transfer camera photos to computer and then E-mail to someone.( Power Shot 160 IS)

HOW DO I : Transfer camera photos taken ( POWER Shot 160 IS) to computer and then E-Mail the out.

Hi BobHopkins!
Thank you for posting.
First, you will need to install the software that came with your camera. Then, connect your camera and power it on in playback. Use the Canon software to download the images from your camera.
Once the images are on your computer, there are a couple of ways to e-mail them. Canon's ImageBrowser EX has an e-mail option in it that you can use simply by selecting the images you want to e-mail, clicking on the Share button, then selecting Email Images.
Otherwise, you can open your favorite e-mail application, then use the appropriate options in that application to attach images to a new e-mail.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My imac 2007 keeps crashing and then it beeps continuously

My imac 2007 keeps crashing and then it beeps continuously when starting up and just has a black screen.

Don't know what caused it other than RAM does occasionally fail.
Don't suppose you bought it from either Crucial or Macsales, as they guarantee their chips for life and will swap them over for replacements.
Sometimes, pulling the RAM chips out and re-seating them will get things working again.
Did you replace the original sticks or add to empty slots? It's often a case of trial and error to see which one/ones have failed. If the original chips were taken out and you still have them try pulling the chips that are currently installed and replacing them with the originals. Or, if the originals are still installed, just pull the additional chips and test. As I say, trial and error. Good luck!

Why does Adobe Flash Player keep crashing and then apparently uninstalling itself?

why does Adobe Flash Player keep crashing and then apparently uninstalling itself? Is this not clear enough?

From System Preferences > Preference Pane click on FlashPlayer > Storage and see what you have selected for options.

If I have logged into icloud on a friends phone and then I delete account does this mean it will sign out of my phone ?

If I have logged into icloud on a friends phone and then I delete account does this mean it will sign out of my phone ?

No. It deletes the iCloud backup (and possibly the data on your friend's phone if you're not careful). It does not affect the content of any other iOS device.

Server Admin crashes and cannot save mail server changes

Problems:
1. In one account, Server Admin crashes on startup.
2. As a workaround, I created another account where SA does start. However, in this account it disconnects from the server any time I want to save changes to the mail settings. Nothing gets saved.
Questions:
a. Can this have happened because I earlier deleted mail accounts in SA without going through curadm?
b. If so, will deleting the accounts in curadm solve the problem?
c. If not, what could have caused this sorry state of affairs?
Thanks in advance.

I didn't mention before that after deleting the .plist file, the mail server would no longer accept incoming connections. Restoring the old .plist file and restarting the mail server didn' t help, so I went back to my backup. Then I had to restart the amavisd demon manually to get the mail queue started.
I hope that the rewritten ServerAdmin in 10.5 will be a bit more robust...

Email appears "Frozen". If I delete the affected account and then add the account back will I lose my email? Contacts? Notes?

Email appears "frozen". If I delete affected email account and then restore it will I lose my email? Contacts? Notes?
thank you

Wpros on old IPad and with Yahoo mail app just fine.

Contact deletion and turning a mail account on and off

Just wondering whether anyone else is experiencing either of these two little niggles (actually the contacts one I have seen in the forum before, but I haven't seen any solutions for it)
1) My contacts have disappeared twice in the last fortnight. I did nothing out of the ordinary and am using MobileMe to sync everything. I just looked down at my contacts and all numbers were gone. Now for me at the moment that's not actually a huge problem - I just flick off the Mobile Me syncing, then flick it on a resync. However, if I'm overseas, I'm wary that I'll incur some data roaming charges as the info hits the phone. Not sure if I'm doing something wrong that makes it disappear randomly, but open to suggestions.
2) I only check my work email on the iphone in the weekends, and during the week I turn it off. What I have noticed is that sometimes when I head to Settings and flick off the work email account, I'll go back in the menu and it will still be active. So I head back in, flick it off again - and then its inactive, as it should be. Weirdly, it almost always takes two flicks to actually turn it off - I've tried waiting for about 30 secs before moving back to the settings screen, but that makes no difference. A tiny problem, but still something that niggles me.
Apart from these two little problems (actually the first would be a big problem if I didn't have Mobile Me), I love the phone and am loving the speed of 3G internet. Reception on 3G and 2G is fine, and I'm getting good battery life out of it (I'm just over 1/2 power now and I charged it on Monday morning).
I'd be keen to hear any suggestions re the first two problems. I'm running 2.0.1

I know but instead of showing the 1000 most recent e-mails it skips whole weeks, going back to 2011. It's really a mystery how this happened without any of my doing. Just to reiterate: on the computer there are all the messages perfectly showing up. On the iPhone only with big gaps. If I could completely delete the account with no trace, I could re-add that account with the same login details and it would force to download the 1000 most recent messages, just like when I first set up the phone.

I just bought a ipad mini and like and my yahoo mail account dosent work anymore how do i fix the problem

so can anyone tell me why i cannot acces my yahoo mail account they ask me for password and then says that yahoo server not availble i did this several times its not working why please

there is a problem with yahoo and there update there servers

Crash, and then no mail accounts listed

Similar Messages

Maybe you are looking for