Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX

Dear MSI Form
The last couple of weeks I have a very bad crash,
This is my system:
Windows 8.1 64
Mother board: MSI Z97 Gaming 9 AC
GPU: MSI GTX 980
CPU: Intel core i7 4790K 4 GHz
CPU Cooler: Cooler Master Nepton 240M
Memory: 16GB 4x4 Corsair vengeance pro
Hard disk: 2 X 1TB 1 X 1TB SSD
Power supply: Be quiet! Power Zone 650W
Case: Cooler Master CM Storm Trooper Window
Fans: 9X Be quiet! Shadow wings + Fan controller
I use my pc mostly for gaming,
I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
I get the following windows event: id 41 kernel power
Scenario:
This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
What did I try to fix it but won’t work:
- Memtest run x10 no error
- Drivers up to date
- The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
- I got no virus.
- Everything is connected just fine.
I hope you guys can help me out.
Kind regards,
Tijs Dragtsma from the Netherlands

May be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?

Similar Messages

  • Microphone issue with MSI Z97 GAMING 5

    Hi there!.
    I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
    I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
    in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
    Thanks and sorry about my english. 

    ill post my specifications
    Board: MSI Z97 GAMING 5
    Bios: Version 1.0
    VGA:   MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
    PSU:   Nox Urano VX 750W PFC
    Intel Core i5-4670K 3.4Ghz Box 1150
    MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
    HDD: Seagate Barracuda 7200.14 1TB SATA3
    COOLER: Katana 4
    OS: Windows 7 64bit Professional

  • MSI Z97 Gaming 9 ACK problem with wifi (lag spike)

    hi all,
    the problem is that all is well connected to the ethernet (killer 2205).
    while on wifi I have many lag spike when i play online game.
    I got a laptop with similar wifi card (killer 1202) and all went good!!
    so why with killer 1525 on desktop i got this lag spike? its very bad.
    the network driver is the newset
    my system:
    windows 7 64bit
    msi z97 gaming 9 ack
    i7 4790k
    16gb ddr3 2133mhz
    msi gtx 970oc
    seasonic 860 platinum

    Quote from: darkhawk on 17-June-15, 18:01:01
    I'd be more for RMA'ing the board.
    But personally, I'm staying away from Killer Network products from now on. They are buggy and do not work very well when they don't work. Sometimes they don't work at all. Check back through these forums, and one of the biggest issues with any of the boards and/or laptops is always the Killer Networks NIC's. And there is no simple and easy fix for many of the issues.
    If it was me, I'd buy a nice wireless card and use that instead. Or do the Intel mod you posted about.
    I won't say that the Killer Networks device SHOULD work, but time and time again they prove to not work. In that case, I'd replace it with something that will and move on. A $40 wireless card to not spend days or weeks trying to fix the problem is money well spent in my opinion.
    now im going with powerlink and all went good, but as all know, powerlink after 2 years will broke and need to replace..... but online game with eth is always better.
    So im tihink to resend to AMAZON and ask for refund and ill rebuy a gaming 7 without wifi this change refund me a good 100 euro......

  • MSI Z97 Gaming 3/Gaming 5 with an i5 4690k

    Hi guys, I just registered here and i have a few questions if you dont mind  .
    I was reading a bunch of articles saying that some MSI cards wont work with the new Devils Canyon without the bios updated.
    I was planning on buying the MSI Z97 Gaming 3 or Gaming 5 (whichever is better) with an i5 4690k, my question is will this motherboard accept the CPU right from the start without needing to update the bios?
    Thanks.

    Quote from: Nichrome on 12-July-14, 19:52:34
    Well if it works out of the box, then it just works. If it doesn't work out of the box, you would have to take the board to someone who has a CPU that should work in 100% and reflash to the latest BIOS.
    Yes, you will have to change sequence/prioritisation of the booting in the BIOS. If anything goes wrong, or you want to get default settings back, then here you can have a >>Clear CMOS Guide<<
    PS: Make sure you have your USB Stick IN when you change sequence, otherwise it won't be possible to change this. And it's not called UEFI USB, unless you will be installing Win 8 in UEFI mode?
    I guess youre right. I talked to the guys at the store im buying the motherboard from and they said they would check on monday what bios version the motherboard has and flash it if its required, even though im betting its the 1.0. Im confused here I never said anything about an UEFI USB. I always intsall my OS from a bootable USB stick that I configure with the win7 tool. Thank you kindly for your response and help. 

  • Can I control 3-pin fan with MSI Z97 gaming 5?

    Hello, I want to know if I can control 3-pin fan plug into 4-pin header with MSI z97 gaming 5 mobo
    Thanks
    PS: Sorry my poor english

    I own an MSI Z87-GD65, im assuming your Z97gaming5 is similar, mine can control 4pin PWM fans on the CPU_FAN1 and CPU_FAN2 headers, and can control 3pin fans on SYS_FAN 1,2,3, all of this on bios fan control (i dont like nor use the Control center).  The limitations of my bios is that on 4pin fans on CPU_FAN1 i can go to 12.5% pwm (as long as the fan can reach this low), while on the 3pin con SYS_FAN i can only drop them down to 50% (thats if you fan can start at that voltage, had one that needed 60%), the fan can be ran at a steady % = rpms or can be dynamically ramp up with the CPU temp, thats also selected on the bios.
    Here is a run that i did last weekend on a Silverstone AP182 connected on SYS_FAN3 on pure bios, you can see there the different % and rpms, and in the bottom you can see prime95 run where it did ramp the fans with the cpu temp.

  • Msi z97 gaming 5 bios update help

    Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

    Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

  • MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

    I have been experiencing a very odd problem with my new hardware.
    Hardware
    Motherboard: MSI Z97 Gaming 9 AC
    CPU: Intel Core i7-4790
    CPU-cooler: Scythe Mugen 4
    RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
    Videocard: MSI GeForce GTX 980 4GB GAMING 4G
    PSU: Seasonic X-660 80+ Gold
    SSD: Crucial M550 2,5" 1TB
    Monitor#1: LG 34UM95-P
    Monitor #2: Eizo Foris FG2421
    OS: Windows 7 Professional
    Issue description
    The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
    It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
    What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
    When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
    Click sounds
    I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
    Tried fixes
    - Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
    - Disabed XMP -> problem persists
    - Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
    - Reinstalled the videocard physically -> problem persists
    - Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
    - Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
    Conclusions so far
    The cause can be found in the videocard or motherboard (probably BIOS issue).
    Who can shed some light on this issue?

    Quote from: JLio01 on 14-November-14, 17:02:39
    Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
    I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
    Quote from: jotan.va on 24-November-14, 18:05:51
    BTW - Did anybody try to remove the wifi module from the board and then test?
    I didn't install the wifi module in the first place.
    UPDATE
    I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

  • MSI Z97 Gaming 9 AC - Intel Wireless AC 7260 module don't work

    Hi,
    Please help me, i started my new rig and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager.
    I already tried to dismount and remount the module on the motherboard with extreme care, no success.
    Here is my rig:
    Main Board: MSI Z97 Gaming 9 AC
    Bios Version: 1.4
    Video Card: R9 290X
    Memory: 16 Gb Corsair Vengeance 2400Mhz
    Processor Intel 4790K
    OC: Not yet
    Operating System: Windows 8.1 Pro 64
    Please help me 

    Recheck your WiFi Bluetooth expansion module connection on the board.
    Recheck your MB mounting in the case, i.e. errant standoffs. Perhaps test the board outside the case on a non conductive surface to ensure no potential short exists. Then retest with the WiFi plugged in.

  • DIMM 1/2 stopped working on MSI Z97 Gaming 5, help!

    Hello again!
    Today I was trying out a different cooler for my i7 4790K, I mounted it and everything worked fine, but results were bad, so I decided to mount previous cooler again...
    And here were the problem starts. After I mounted everything back (exactly following guide like before, thermal paste etc all done) my PC would not start the system nor BIOS.
    I wondered what could cause it, so just to check a possibility, I unplugged one RAM module from DIMM 2 (they used to work in dual-channel at 2/4 DIMMs) and it suddenly started BIOS and system up normally.
    Following this tip, I unmounted cooler's fan, because it covers DIMM 1 to check if it would work, and doesn't matter what memory I plug in DIMM 1 or 2, it won't work  Doesn't work with any combination, so I can't actually use dual-channel right now, as only DIMM 3 and 4 work at the moment (both or alone). Any module plugged in 1/2 slots doesn't work.
    All I see is that temperature monitor on my MSI Z97 Gaming 5 shows 10-55, 10-55 all the time, jumpy temps, everything works, but nothing loads. Just black screen, nothing. I work with 3/4 slots in single channel right now.
    What the hell could happen? Please help me with this! 
    Edit: Is that possible I could move a CPU from a proper pin so it doesn't connect properly with DIMM 1 and 2? My cooler moved a bit before I mounted it properly. That's only thing that comes to my mind right now.

    Quote
    EXTENT OF LIMITED WARRANTY
    Intel does not warrant that the Product will be free from design defects or errors known as “errata.” Current characterized errata are
    available upon request. Further, this Limited Warranty does NOT cover:
    any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred by you, and in
    particular, any costs relating to the removal or replacement of any Product that is soldered or otherwise permanently affixed to any
    printed circuit board;
    OR
    damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or
    environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
    improper testing;
    OR
    any Product which has been modified or operated outside of Intel’s publicly available specifications or where the original identification
    markings (trademark or serial number) has been removed, altered or obliterated from the Product.
    http://download.intel.com/support/processors/sb/warranty_procts_english.pdf
    So if you have bent the pins and didn't buy the "care package" or whatever they call for improved warranty, then I believe that it is void. But read whole PDF carefully.
    I might be wrong, I'm just a human. Contact Intel about this:
    http://www.intel.com/p/en_US/support/warranty

  • MSI Z97 Gaming 7 PWM Fan setting question

    Hello, right now I'm using Z87 motherboard from others vendor (as***k), and now I want to change my motherboard to MSI Z97 Gaming 7. But there's something that I want to ask first. When I'm using still using Z77 motherboard which is MSI Z77A-G45, I can set the PWM fan to change it speed automatically by change the CPU fan to auto in the UEFI. But in the Z87 I currently use I have to customize it in the UEFI, so that my PWM CPU fan change its speed as the CPU temperature changes, it can't be set to auto and I don't like it at all. Now that I want to change my motherboard to MSI Z97 Gaming 7, I'm searching the review first. And I'm seeing that it have similar fan setting with the Z87 motherboard that I currently use 
    I want to ask, is it possible that I can set the CPU fan setting to auto just like the Z77A-G45 I used to have?

    Quote from: Abula on 19-May-14, 08:22:10
    What you are seeing is mulitple breakpoints of temperature, as you do on your AsRock.
    I own a Z87GD65, and in mine i only have 1 true breakpoints, which is the temperature in which you want the fans to speed up, according to the temperature of the cpu.  I als did a build for a friend on a Z77GD43 and it was similar just didnt had the graph, as it has on the Z87GD65 nor the new one that you posted on the Z97 Gaming7, but what i see is more customization on the new motherboard, with 4 different breaking points, i see the same restrictions on the PWM %, increments of 12.5% as it is on my GD65, weather its worth it, personally i dont care, one is good enough for me, i usually just spin down my fans to the lowest i can, and set the breakpoints for the temperature i want my fans to spin up, if the temperature is reach they will increase gradually, defined by the max PWM % and max temperature, this two variables (that you can change) will make the graph with more or less inclination.  In the new Z97 Gaming 7, seems the same just multiple breakpoints, meaning you can have different inclinations into how the fans react depending on the temperature, weather its worth it or not.... depends on the level of customization you want to the fan control, personally im fine with a single, but i can see people that could like having depending on their needs, personally what i would have loved though, is to give me 10% increments instead of 12.5%, or 5% would been better, but 12.5% just seems odd number imo.
    Remember, MSI only has 2 true PWM fan headers, CPU_FAN1 and CPU_FAN2, even though all are 4pin physically the SYS_FAN are not true pwm fan headers, they are voltage controlled and have much higher restrictions than the real PWM fan headers.  And remember that if you plug 3pin fans on PWM fan headers they will spin at 12V that its the voltage that its handled by PWM fans, so be careful what fan you plug into where to have control on them.
    Hmn, so since Z87 MSI use that breakpoint system to control PWM fan, just like my asrock Z87. So there's no auto setting on your Z87GD65?

  • Msi z97 gaming 9 ac compatibility bios

    I wanted to know if the motherboard "MSI Z97 gaming 9 ac" is compatible with vga "N780 tf 3gd5/oc." I have upgraded the motherboard bios to version 1.4 (the latest released 06/30/2014). In case it is not compatible, you may release an update of the motherboard and make it compatible? Thanks in advance
    The products to which I refer are the following:
    Motherboard: it.msi.com/product/mb/Z97_GAMING_9_AC.html#hero-overview
    Vga: it.msi.com/product/vga/N780_TF_3GD5OC.html#hero-overview

    Quote from: Damianomsi95 on 15-July-14, 02:17:36
    What is it the S/N? how do I upload it and provide it?
    Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
    1.) Vbios versions vary with-in models. This is due to different variations and improvements made in time. In order for us to be able to get you the right VBIOS. We need your serial number. The serial number can be found on a sticker on the bottom of your card or on the box in which it came.
    Quote from: Damianomsi95 on 15-July-14, 02:17:36
    the card now I do not have here, but do not think it's possible given that black screen
    Quote from: flobelix on 15-July-14, 00:51:41
    a copy of the current vbios saved to file (use a system where card works, save to file, upload to some file hoster and add link here)
    Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
    3.) If we need to check if thier is a more recent version. We can check your Vbios in one of two ways.
         A.) Upload a copy of your current vbios somewhere and give us a link. You can save a copy of your vbios using >>GPU-Z<<.
         B.) You can also just use NVFLASH >>Download NVFLASH for windows<<
    Syntax:
    nvflash /v >rep.txt [ENTER]
    This will copy all of the information we need into a txt file you will fine in the folder in which you placed nvflash.

  • No signal With a Z97 Gaming 5

    Hello everyone,
    I have a big probleme:
    I've set all my system (description below ) but when i want to switch on the computer, the screen go on No signal.
    Motherboard: MSI z97 Gaming 5
    Graphic Card: R9 290 Tri-X
    Chipset: Intel 4690K (LGA 1150)
    RAM: 16 Go (4*4) G.Skill 1600 MHz
    Power Supply: Corsair TX750w
    Thanks a lot ! =D

    Quote from: Nichrome on 25-July-14, 04:31:56
    mobo-motherboard
    A bit HARDCORE image but these are bent pins:
    MB- Motherboard attached with processor, 1 stick of RAM and Power Supply Unit(PSU) and the monitor. As the external test. And these are the minimal things you need to boot.
    Wow, whoever owns that board CAN make the square peg fit into the round hole! Seriously, did they close their CPU latch by hitting it with a brick? o.O
    Sorry for the not helpful comment, but I couldn't resist! You weren't kidding when you said hardcore! LOL

  • Choose ram for i7 4790K + MSI Z97 Gaming 9 AC

    My PC
    i7 4790K
    MSI Z97 Gaming 9 AC
    RAM Corsair cmd8GX3M2A1600C8 2x 4gb
    ASUS GTX 780 Ti DC2 OC
    PSU SEASONIC p760w platinum
    SSD samsung evo 250gb
    ====================
    1. I saw on the web MSI, about compatible ram.
    and ram that I used did not exist in the list.
    whether the ram that I use is not compatible with i7 4790K + MSI Z97 gaming 9 AC ?.
    2. I plan to replace my ram, but I was confused by the many choices.
    ---------- CMY16GX3M2A2133C11R
    ---------- CMY16GX3M2A2400C11A
    please give me advice, where ram is better than what I use now.

    Quote from: Nichrome on 29-December-14, 01:07:50
    Possibly yes. But there is no real performance improvement and difference between 1333MHz (lowest DDR3 sold) and 2666MHz. 1FPS in some games, so it's not really worth $100 more, as that's common price difference between 2x8GB 1600MHz and 2x8GB 2133MHz. If you need MORE amount of memory, then yes it makes sense. But if you only want to have it "quicker" then there's no point.
    MSI simply tests certain amount of kits on certain motherboard and that's it. If it works, they say it's compatible, if it doesn't, then I think they also mention that. If they don't test something, then it's not mentioned at all.
    I tried to run my ram at 2133MHz. with memory try it. and I made it, but I do not change the settings laiinya.
    is there any other suggestions?
    =========================
    I am not looking for a FPS, but I seek the comfort of playing.

  • MOVED: MSI Z97 Gaming 5 and Intel Core i7 4790K

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=181378.0

    Quote from: AranelSurion on 03-July-14, 22:02:56
    Speancer, what was the BIOS version yours shipped with?
    I got a GAMING 5, according to MSI Support it's V1.0, since I don't have a spare LGA1150 chip I'm really curious if 4790K is going to work as it is. My build is from entirely new parts, so if somehow it fails to POST, I can't know for sure if it's because of the outdated BIOS or something else, It would be great to know if it's actually going to work or not on 1.0 .
    Anybody tried 4790K with 1.0 BIOS? Does it work?
    It was 1.0  Like I said, it works perfectly ouf of the box on MSI Z97 Gaming 5 with i7 4790K CPU. After installing system and most of my softwares like it was before format, I noticed that I could not enter BIOS, but system was working normally. Then I flashed BIOS from 1.0 to 1.3 in Windows and it worked again and has been working ever since.
    Good luck with your new rig 

  • MSI Z97 GAMING 3 Review--Performance Testing

    After the previous hardware and software introduction, I believe Z97 GAMING 3 will meet gamers’ expectation.
     Z97 GAMING 3 integrated with Killer E2200 LAN, Audio Boost 2, M.2 interface and the normal array of connections,
    It is truly a good gaming motherboard. Could all these features offer great performance and a good experience?
    Today I will test the performance of Z97 GAMING 3 and how good it is.
    MSI Z97 GAMING 3 Testing
    My test platform is MSI Z97 GAMING 3, Intel ® Core i7-4770K and MSI GeForce GTX 750 graphics card. The test
    consists of two parts:
    CPU Performance: Super PI, PC Mark Vantage and Cinebench R11.5.
    GAMING Performance: 3DMARK 11, Evil 6 Benchmark and FFXI Benchmark.
    Test Part 1
    CPU : Intel Core i7-4770K @ 3.5 GHz
    CPU Cooler : Thermaltake TT-8085A
    Motherboard : MSI Z97 GAMING 3
    RAM : Corsair DDR 3-1600 4GB X 2
    PSU : Cooler Master 350W
    OS : Windows 7 64 bit
    Basic performance testing (CPU setting by default)
    CPU Mark Score : 679.
    Super PI 32M Result – 8m53.897s.
    Graphics Performance Testing：3DMark 11
    3DMark 11 is designed to measure  PC’s performance. It makes extensive use of all the new features in DirectX 11
    including Tessellation, Compute Shader and Multi-threading.
    Intel ® HD4600 iGPU in 3DMark 11 Basic mode testing, the results is X385 Score.
    Performance mode test score is P1511 .
    System Performance：PCMark Vantage
    PCMark Vantage is a PC analysis and benchmarking tool consisting of a mix of applications such as based and
    synthetic tests that measure system performance.
    From the test results, the score of Z97 GAMING 3 with Intel ® HD4600 iGPU is 11,946.
    MSI  GeForce GTX 750 Testing
    Test  Part 2
    CPU : Intel Core i7-4770K @ 3.5 GHz
    CPU Cooler : Thermaltake TT-8085A
    Motherboard : MSI Z97 GAMING 3
    Graphics Card：MSI GeForce GTX 750
    RAM : Corsair DDR 3-1600 4GB X 2
    PSU : Cooler Master 350W
    OS : Windows 7 64 bit
    Graphics Performance Testing：3DMark 11
    Z97 GAMING 3 with GeForce GTX 750 the test scores is X1653 in 3DMark 11 basic test mode, The performance
    mode test score is P5078.
    System Performance：PC Mark Vantage
    From the test results, Z97 GAMING 3 with GeForce GTX 750 scores 11,518.
    System Performance：Cinebench R11.5 
    Cinebench is the software developed by MAXON Cinema 4D. Cinebench could test CPU and GPU performance with
    different processes at the same time. For the CPU part, Cinebench test the CPU performance by displaying a HD 3D
    scene. For the GPU part, Cinebench test GPU performance based on OpenGL capacity.
    Main Processor Performance (CPU) - The test scenario uses all of your system's processing power to render a photorealistic
    3D scene. Graphics Card Performance (OpenGL) - This procedure uses a complex 3D scene depicting a car chase which
    measures the performance of your graphics card in OpenGL mode.
    In Cinebench R11.5 test, MSI Z97 GAMING 3 with GeForce GTX 750 multi-core test is 6.87pts; OpenGL score is 73.48 fps.
    Z97 GAMING 3 with HD 4600 and GeForce GTX 750 in the GAME Benchmark Test
    For game performance testing, I will use Resident Evil 6 and FFXI Benchmark with the same platform.
    Evil 6 Benchmark
    CPU: Core i7-4770K
    Game resolution setting: 1920X1080
    Other setting: Default
    In the Z97 GAMING 3 with Intel® HD4600 iGPU platform, score:1175 (Rank D)
    In the Z97 GAMING 3 with GeForce GTX 750 platform, score: 5874 (Rank A)
    I use Fraps tool to record FPS status during benchmark testing.The Z97 GAMING 3 with GeForce GTX 750 average
    FPS is 202. The Z97 GAMING 3 with Intel® HD4600 iGPU average FPS is 32.
    FFXIV Benchmark
    CPU: Core i7-4770K
    Game resolution setting: 1920X1080
    Other setting: Default
    The 1920X1080 resolution, Intel® HD4600 iGPU score is only 910.
    However, the GeForce GTX 750 testing score is 4167. According to the official classification system, the score
    between 3000 to 4499 means high performance.
    I use Fraps tool to recorded FPS status during benchmark testing.
    the GeForce GTX 750 average FPS is 111.  Intel® HD4600 iGPU average FPS is 19.
    Test Summary
    MSI Z97 GAMING 3 is not very expensive. It has many features which are specially designed for gaming experience
    and good performance of benchmarks. Even in 1920x1200 resolution and high quality display setting, Z97 GAMING 3
    with Intel Core i7-4770K and MSI GeForce GTX 750 can easily handle any kind of games. The FPS of this system is
    higher than 60 and users will enjoy no lag as gaming. It is really a good and afforadable chioce for gamers.

    Thx for the sharing, since there are not much reviews about Z97 GAMING 3. 

Maybe you are looking for