Crash db work very very slow and server

Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
In the log file at the time that server crash down i found this message
*** 2009-02-28 03:03:49.484
*** SERVICE NAME:() 2009-02-28 03:03:49.468
*** SESSION ID:(166.1) 2009-02-28 03:03:49.468
Media recovery not enabled or manual archival only 0x10000
Maximum redo generation record size = 156160 bytes
Maximum redo generation change vector size = 150672 bytes
*** 2009-02-28 07:51:07.218
Media recovery not enabled or manual archival only 0x10000
*** 2009-02-28 09:21:05.218
Media recovery not enabled or manual archival only 0x10000
*** 2009-02-28 09:51:16.843
Media recovery not enabled or manual archival only 0x10000
*** 2009-02-28 09:54:47.531
WHAT does it MEAN ???
Bye Bye

HI..
Can you paste the output of
sql> archive log list
Refer to metalink Doc ID: 373445.1
HTH
Anand
Edited by: Anand... on Feb 28, 2009 10:01 PM
Metalink DOC Id added

Similar Messages

Macbook works very slow and consumes a lot of battery power when closed

Hi@all
I hope someone of you can help me. My Mac crashed yesterday. I got a warning saying "there was a problem, your Mac will reboot" (I didn't get the exact words because it vanished quite fast and the MacBook rebooted itself). Since then my Mac is working very slow and freezes every few minutes. I looked at the CPU usage but this is always under 25% so there shouldn't be a programm that causes this problem.
In addition:
When I close it, it seems to go to sleep mode normally but is still consuming quite high amounts of battery power and get's warm. When I work with it the temperature stays normal.
I have a MacBook Pro (mid 2012) with 2.5 GHz Intel Core i5 running with Mavericks.
It would be great if someone has an idea what could cause this kind of problems.
Thanks a lot in advance for your suggestions :-)

sternblume,
for the high energy consumption in sleep mode, you could try resetting its System Management Controller.
For the slow working and freezing, you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode.

I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?

I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?

Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookies, Data and History
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I upgraded my three year old ipad to IOS 8 and it's working very slow and irregular, can I go back to the old settings?o

I recently upgraded my three year old ipad to IOS 8 and it's working very slow and sometimes freezes. Can I go back to the old system?

No, downgrading the iOS version is not supported by Apple.
You could see if any of the following improve things :
- closing apps via the iPad's taskbar : iOS: Force an app to close.
- if having problems with Safari, clearing its history and data : Settings > Safari
- soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
- backing up (and copying any purchases over to your computer's iTunes library via File > Devices > Transfer Purchases) and restoring
- adjusting settings e.g. turning 'reduce motion' on (Settings > General > Accessibility), turning off 'background app refresh (Settings > General), turn off multitasking gestures (Settings > General)
- resetting back to factory defaults (after copying off purchases and any documents, photos etc that you want to keep) and then resyncing it back

What can we do if the home button of my ipod is working very slow and if my ipod is still in warranty and by the way i have an ipod touch 4

what can we do if the home button of my ipod is working very slow and if my ipod is still in warranty and by the way i have an ipod touch 4

If it is still under warranty take it to an Apple Store, or in any case call AppleCare (see http://support.apple.com/kb/HE57 for list of international phone numbers) to see if they can help you. They may be able to help you with repairs if it is a physical problem with the home button.

HT1976 Hello my is working very slow and iCloud is asking me a code that has send to me I write down the and he said code error?help me fix it thank you

Hello iPhone is working very slow and the code error and also iTunes very slow!!pls fix it .thank you

To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39

After software update macbook pro works very slow and no applications will open

Updated software today, since software updated macbook is running really really slow (approx. 4 mins from pushing the power button to home screen) and no applications including itunes will work. Anyone any ideas???

kBirr wrote:
Tried this, to no avail, applications (itunes, pages, iphoto) still won't open & MacBook still running very slow
thanks anyway
Did you restart your computer after repairing permissions?
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Your system info says:
MacBook Pro
Yet, in your postings you say: "MacBook" which is an entirely different computer. Typo? Are you in the correct community area?

I have iphone 3g, phone is working very slow and even i can not been able to close the running application

i have the Iphone 3g, OS 4.3.2.1
My Phone is working terribly slow, and even i can not been able to close the running application
for closing application Every time i have to restart the phone
can any 1 help me solve this problem
with best regards,
prakash

You must have an iPhone 3GS then if its running 4.3.2
The iPhone 3G can only update to 4.2.1 iOS.
Reset the iPhone
Hold the top silver button and the home button (just below the display of the iPhone)
Do this at the same time for about 10 seconds until you see an Apple.
The iPhone then should take 1-3 minutes to restart and it should be fine

My new macbook working very slow,and fan sound is so much

i bought it few months before,it was performing well,sudden it becomes so slow and i can listen fan voice is so much,,how to fix it please suggest

Reset the SMC:
http://support.apple.com/en-us/HT201295
If no success, run an Apple Hardware Test:
http://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
Ciao.

Sql Developer is working very slow and it's making other applications slow

I am using SQL Developer 1.5.1.54.40.
Sometimes it hangs. Sometimes the space key doesn't work in the sql sheet.It's overall performance is slow. And i have found it slows down other applications to open and close. I have 1GB RAM.
Please tell me is it the problem of SQL Developer or my PC?

I have seen the "Automatically Check for Updates" option significantly slow down the start of up SQL Developer when it is switched on. You might want to see if switching that off (Tools > Preferences > Extensions) makes a difference to start up time.
SQL Developer's not insignificant memory usage may cause problems if it takes you beyond your physical memory, which typically slows down opening, closing and switching between applications. This is when you need to look at the task manager (assuming windows) as per the previous suggestion.
theFurryOne

External USB hard drives working very slow and/or not recognized. Help!

This probably started after my Yosemite upgrade, but my external usb hard drives either aren't working well or not being recognized. It's taking forever to write files to my external Seagate Free Agent USB 2.0 through front ports and my thumb drives aren't mounting (they have shown up for a second or two, then nothing). Is there a fix? I'm on an early 2008 mac pro with Yosemite 10.10.2.
Thanks!

Do an SMC reset using this slightly-modified procedure:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
1.Shut down the computer.
2. Unplug the computer's power cord.
[2a. Press the power-on button to discharge the power capacitors.]
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
in all cases, the stated times are recommended minimums, and there are no maximums.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

The new update 5.0.1 makes myiphone 4s freeze and work very slow..how can I downdrade it to previoys version of sowtware? Or when is it going to be fixed?

Ever since I upgraded my iphone it works very slow and freezes all the time..I cant answer 50% of myy calls because of this , next thing its working just fine..all of my friends who had their phones updates experience the same..can I go back to the previous version of software or when is it going to be fixed?

Ever since I upgraded my iphone it works very slow and freezes all the time..I cant answer 50% of myy calls because of this , next thing its working just fine..all of my friends who had their phones updates experience the same..can I go back to the previous version of software or when is it going to be fixed?

Cover flow is very slow and crashes on iOS 5 or is it just my iPod Touch?

Basically, everytime I use cover flow on my music and scroll around it laggs and crashes. The simple solution is to not use it I know but I'm just wondering if you guys are having the same problem.

Same here on my 3GS. Found that restoring a second time the phone helps,no more crash,but still very slow and freezing,compare to flawless response on previous IOS3-4.
Note that looking at diagnostics reports,it have lot's of "LowMemory" and "awdd" messages with dates corresponding to the times is was using cover flow.
Even outside of cover flow,my 3GS registers lags corresponding "LowMemory" reports quite often.
I enable then sharing to Apple of those diagnostics on the phone,hope they fix this soon!

After update to Lion Numbers became very slow and clumsy.

After update to Lion, Numbers works very slow and clumsy. Any solution to fix this problem?

Don't know about being "slow" - I've always felt it was slow. I could run Office XP (maybe 2000 - not sure) on an 133 mhz Pentium and it was faster than Numbers on my late 2008 Aluminum MB.
But I've had other issues under Lion with it. It seems whenever I first go to my spreadsheets after the computer has been asleep - even if it is some time after waking it up - and start to enter some numbers, I'll get a beep and see that what I tried to type didn't come out right and I have to do it again.
I was wondering if it was something to do with the auto-save versions maybe kicking in when I first start to enter info, but before I finish the first entry.

Premier Elements 4 very slow and frequently crash

Dear Adobe support staff,
I've purchased Adobe Premier Elements 4 several yeard ago for an urgnet job I made.
I didn't use it much because it crashes all the time, and it is very very slow and frustrating. So I've used other software instead.
Needless to say that I was very dissappointed.
Now, I want to give it a second chance. but it stiil keep crashing and still very very slow.
My questions:
1. Why does it crash all the time? is there is a fix for the problem?
2. What kind of Graphics Card or Video Editing Card do you recommend for my system to work relatively normal ?
3. How much will it cost me to upgrade to version 11 ?
My system SPEC:
OS: Microsoft Windows 7 ultimate with SP1 (32bit) .
CPU: INTEL Core2 QUAD cpu Q9550 , 2.83 GHZ with a 4 GB of RAM.
Graphics card: NVIDIA GeForce 9600 GT.
Motherboard: MICRO STAR INTERNATIONAL , MODEL MS-7353 3.0, CHIPSET INTEL X48,
RAM: 4 GB Dual Channel DDR2, 400 MHZ , 512 MB memory.
Please advice.
Sincerely yours,
Shimon Tourgeman.

For the crashing, this FAQ Entry might be useful. It starts with a general PrE checklist, then goes into computer and OS tuneup, and ends with many links on troubleshooting and finding causes: http://forums.adobe.com/thread/792580?tstart=0
As for the GPU, any current video card, with at least 1GB of VRAM, will work well. PrE does not place much of a load on the GPU, but it DOES rely very, very heavily on the video driver. Both nVidia and AMD/ATI issue constant driver updates, with nVidia leading the way at this moment.
Also, while talking about drivers, some users have experienced issues with Win8 drivers. I would wait until SP1 has been released for Win8, before changing to it from Win7. For this reason, I just ordered a new laptop, and specified Win7. As the company, ADK, only builds custom and semi-custom video editing machines, they commented that they will ONLY install Win7 at this time, and have been testing Win8, since the first beta. They do not think that it is yet ready for "prime time."
Good luck,
Hunt
PS - I still use PrE 4.0, but on XP-Pro SP3, and have only crashed it 2-3 times over the years. At least 2 times, it was due to OE on my part. However, my computer is tuned and built for video editing.

Crash db work very very slow and server

Similar Messages

Maybe you are looking for