Crash dump error occur in solaris sparc DB Server
Can some one explain me the how the core dump occurs in solaris sparc server ,
Server has rebooting occurs in plade server
It seems the post was originally in the Certification forum.
That wasn't the correct location (by any stretch of the imagination).
It was moved to the Servers' General Discussion forum because it seems the issue was experienced on a Sun-branded blade system.
However it is an OS question, or perhaps a generic software question.
This thread has now been moved to the General Solaris forum, hopefully for closer topic alignment.
Response #1 is likely going to be the only appropriate answer.
If there is a core dump in the +/var/crash/<hostname>+ directory, then it's an OS issue.
If the core file(s) are elsewhere, then it's an application core and the provider of whatever that application might be will need to be consulted for support.
Similar Messages
-
Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.
Hi 99jon,
Many thanks for that. Had been going through this list yesterday and now again today:
Ref Solution 1: Lightroom is at its latest update
Ref Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
Ref Solution 3: Lightroom doesn't allow me to do anything after the error message appears
Ref Solution 4: don't have any Nik Software plug-ins
Ref Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
Ref Solution 6: I don't have a different user account on my mac.
Not sure what else to do. -
An error occurred while creating a Page Server subprocess.
I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account. -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li -
An error occured while sending mail: SMTP server error. The server responded: (null)
I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page. -
Error occured while communicating with web server
In Netweaver if you receive this error " error occured while communicating with web server "
check your script logic file if you have mande any change to dimension
names
VinooHi,
validate below note
Note 1330145 - an error occured while communicating with the web server
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b161a590-0201-0010-5590-91fa5076a914
regards
nag -
Error on timesheet submission "An error occurred while communicating with the server.
Hello, we have many users who are encountering errors submitting timesheets following our migration to Project Server 2013 (SP1 April 2014 CU). The error is:
An error occurred while communicating with the server. Check connectivity with your administrator to determine whether further action is necessary.
This follows the specific timesheet, if I open a delegate session on my machine, I can reproduce the error. However, simply deleting and recreating the timesheet has resolved it for many users, at least until the next timesheet submission.
Has anyone seen this sort of widespread behavior and have a solution beyond deleting and recreating the given timesheet?
Thanks!Hello Joncantrell
I just ran into issue and found a way to resolve, though it may not be the best. I think it is a bug, but here is how I fixed it.
1) Delegating as the user
2) Deleted the timesheet
3) Going line by line, I check each task that had a status of "Not Submitted" and "Send Progress for Select Task".
4) The error came up only for one task.
5) Open that schedule, remove resource from task, saved and published.
6) Deleted and recreated timesheet
7) Submitted timesheet and processed normally.
I hope this helps
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support -
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)
Hi All,
We are in the process of Migrating our EP 5.0 --> EP 6.0. While upgrading TREX, I am getting following error:
"Error occurred during search: com.sapportals.wcm.WcmException: <b><u>A communication error occured, with the TREX TcpIp Server (Errorcode 2982)</u></b>
A communication error occured, with the TREX TcpIp Server (Errorcode 2982)"
Has any one came across this type of error ?
<b>Software version details:</b>
EP 5.0 SP6 Patch 1 Hotfix 8
CM SP 6 Patch 1 Hotfix 21
Trex (Earlier 6.0.0.0)---> TREX 6.0 SP 1 Patch 6 (6.0.1.6.0)
Regards
Sunil KulkarniHello James,
Thanks for writing.
I am on Windows.
Now the problem is solved. I had also created a message with service market place for the above mentioned problem.
<b>Solution:</b> While upgrading the TREX, it has overwritten the "TREXIndexServer.ini", we restored it from the backup & the error was resolved.
Thanks & Regards
Sunil Kulkarni -
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred
Hi
i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server Search
Date: 7/12/2014 9:56:04 PM
Event ID: 57
Task Category: Search service
Level: Warning
Keywords:
User: XYZ\svc-mc-sps3eServsear
Computer: SPFIND01.xyz.gov.local
Description:
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Context: Application 'XYZSP_SearchApp'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
<EventID>57</EventID>
<Version>14</Version>
<Level>3</Level>
<Task>136</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
<EventRecordID>225666</EventRecordID>
<Correlation />
<Execution ProcessID="3408" ThreadID="2932" />
<Channel>Application</Channel>
<Computer>SPFIND01.xyz.gov.local</Computer>
<Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
</System>
<EventData>
<Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
<Data Name="string1">1205</Data>
<Data Name="string2">1</Data>
<Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.</Data>
<Data Name="string4">
Context: Application 'XYZSP_SearchApp'</Data>
</EventData>
</Event>
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
Context: Application 'XYZSP_SearchApp'
adilIf you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.
-
Hi, I am receiving emails but whenever I try and send I get the following message:
unable to send emails An error occurred sending mail: The mail server sent an incorrect greeting: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready..What are your settings in Tools(or AppMenu/Options)/Account Settings/Outgoing Server (SMTP)? The error message suggests you must have STARTTLS connection security and normal password authentication:
https://getsatisfaction.com/mozilla_messaging/topics/mail_preferences-t1xeq -
An internal error occurred during: "Starting BEA WebLogic Server v8.1 at lo
Hi,
On "Start the server in debug mode"
file .log
eclipse.buildId=I20090611-1540
java.version=1.6.0_13
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=es_AR
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.core.jobs 4 2 2009-08-05 12:29:57.060
!MESSAGE An internal error occurred during: "Starting BEA WebLogic Server v8.1 at localhost".
!STACK 0
java.lang.NullPointerException
at oracle.eclipse.tools.weblogic.legacy.GenericWeblogicServerBehaviour.findWorkshopJspDebuggerLaunchConfigurationDelegate(GenericWeblogicServerBehaviour.java:477)
at oracle.eclipse.tools.weblogic.legacy.GenericWeblogicServerBehaviour.setupLaunch(GenericWeblogicServerBehaviour.java:226)
at org.eclipse.jst.server.generic.core.internal.ExternalLaunchConfigurationDelegate.launch(ExternalLaunchConfigurationDelegate.java:101)
at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:853)
at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:703)
at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:696)
at org.eclipse.wst.server.core.internal.Server.startImpl2(Server.java:3057)
at org.eclipse.wst.server.core.internal.Server.startImpl(Server.java:3007)
at org.eclipse.wst.server.core.internal.Server$StartJob.run(Server.java:294)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
OS= Windows XP SP2
Eclipse Java Version= 1.6.0_13
Workspace Java Version= 1.4.2_08
BEA Weblogic= 8.1.6
Eclipse= 3.5.0
WTP= 3.1.0
Project Facets= Dynamic Web Module 2.3
Java= 1.4
Tanks and sorry my English.
GustavoI am also experiencing the same NullPointerException when launching Weblogic 8.1 in debug mode within Eclipse 3.5. Is there any anticipated fix for this issue, or a bugtraq record that we can follow to know when the issue is addressed? I do not expect JSP debugging to work (as it wasn't available with Weblogic 8.1 under Eclipse 3.4 either) - BUT right now I cannot debug ANY server-side code within Weblogic 8.1 in Eclipse 3.5 as the server cannot start in debug mode at all.
Many thanks. -
Error occurred with the POP3 mail server
When I first launch my email icon the following error pops up: An error occurred with the POP3 mail server. Mail server mail.midland-webhosting.com responded
What can I do so that I can access my email? Thanks!Ok I will write lots and lots.
The mail server responded what is that question. You posted what looks like half the error message. So like you I do not understand. Those message have a second half that explains what the problem is. -
An error occurred while contacting the LDAP server.
An error occurred while contacting the LDAP server.
(No such object)
The server could not locate the entry. If adding a new entry, be sure that the parent of the entry you are trying to add exists. If you received this error while searching or viewing an entry, it indicates that the entry which was being searched for does not exist.I did the silly thing, i gave Base DN as o=domainname.com,which is supposed to give like dc=domainname, dc=com and restarted the server. LDAP works fine.
-
Alerta An error occurred with the pop3 mail server. Mail server responded;
Boa tarde, ao receber email´s aparece a mensagem:
Alerta An error occurred with the pop3 mail server. Mail server responded;
Não utilizo gmail nem yahoo, outros usuários recebem normalmente os emails.
PAra enviar está normal sem problemas.
Obrigado.Isto significa que o servidor requer uma autenticação segura e você não especificou, vá em '''Ferramentas''' >> '''Configurar contas...''' na sessão '''Servidor''' especifique um modo de autenticação e faça o teste novamente.
Maybe you are looking for
-
I have two separate itune accounts under two different email accounts and would like to combine them under one account. Is this possible and if so, how do I do it?
-
I KEEP GETTING ERROR -3 WHEN INSTALLING THEN ERROR -2093 WHEN I TRY TO RUN
I KEEP GETTING ERROR -3 WHEN INSTALLING QUICK TIME, AND THEN WHEN I TRY TO RUN ITUNES I GET ERROR -2093. PLEASE HELP!! I HAVE DELETED AND REINSTALLED THIS MORE THAN 5 TIMES ALREADY! I HAVE AN ACER COMPUTER WITH WINDOWS XP. IF YOU CAN HELP ME PLEASE R
-
Cannot add multiple filters on a single column on certain libraries
On some of our lists/libraries, we can filter a single column to display a more than one selection. For example, column1 contains the following choices: Yes No Maybe I can add a filter to column1 and select Yes and Maybe. This works in some lists/lib
-
My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7. I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language. My serial number is not accepted.
-
We are running SCCM 2012 SP1 with CU4. When I add/import an OSD image into SCCM, it automatically copies the entire 10GB image into the "SCCMContentLib" folder on the main site server which I do not want. This causes us to then essentially have two