Crash during audio playback while Analysis Text open

Using Premiere CC 7.2:
I just started playing around with 'Analyze Content' option and once that was done, the Analysis Text was populated in the Metadata panel. If I click on any parts of the Analysis Text and hit Play, Premiere CC crashes.  If I play the audio from the source monitor, no issues.
For now, I'll work around it by playing from the Source Monitor and having the metadata panel up to correct the text.

Did some more troubleshooting. Try this:
1. Open project
2. Select the audio clip so it populates the metadata panel. Don't double click so it populates the Source Monitor.
3. Select any word from the Analysis Text. Hit Play from Metadata panel. Crash occurs.
Meanwhile, this will work:
1. Open project
2. Double click the audio clip so it populates the metadata panel and Source Monitor.
3. Select any word from the Analysis Text. Hit Play from Metadata panel. Plays normally.

Similar Messages

  • Having random crashes during audio playback.

    Greetings,
    I seem to be having some issues with crashing during audio playback.  Here are my specs:
    MSI K8N Neo2 Plat  (1.B BIOS)
    AMD Athlon 64 3500+ (Winchester)
    4x512 Corsair TWINX 1024 3200C2PT (Bought at seperate times, but revisions are almost exact and they run stable)
    NVIDIA GeForce 6800
    Creative Audigy 2 ZS
    Forton Source FSP 400W
    It seems to do the same thing every time.  The audio will start skipping (in more than 1 media player) and after no BSOD, the computer will reboot itself.  I have it set to show a BSOD as well.  It has even started to ask to check my D: drive for errors after this.
    The problem first started to occur after a couple of things.  I recently updated my bios to the 1.B version as stated.  And a week or so ago I did a fresh install of Windows.  The sound was working fine with the new BIOS, but now with the new Windows install it has had issues.  Are there any known issues with the Audigy2 ZS and the new 1.B BIOS that I just didn't experience before?  Granted, I did not have my old install of Windows long under the new 1.B BIOS.
    At this moment I am using the AC97 onboard audio to see if that crashes as well, and just to hopefully have the random crashes stop happening.  I know there are quite a few avenues to take, I am just looking for opinions on which would be the best one.  Reflash the bios to an older version?  Try the Audigy2 in a different PCI slot? (I had it in the 2nd to bottom as the NIC is plugged into the orange PCI)  Contact Creative for an RMA or repair of the card?  I only bought it on December 16th, so it's fairly new.  Something else I am maybe missing?  A BIOS or Windows setting?
    Any help on this would be greatly appreciated.  If I need to provide any more info, please say so and I will promptly.
    Thanks.

    I have the same MB and CPU but I am using the onboard sound and have not had any problems with that.
    I can recommand that you bump up your memory voltage to 2.6~2.7 and loosen up your memory timings to something like 2.5-5-5-8-2T.
    Then remove all drivers from your Audigy, disable your onboard sound and remove those drivers, shut down and install your Audigy and boot up allowing Windows to find your new hardware and then install the drivers.

  • X201 hangs and makes noises during audio playback

    Hello, I've a 3249CTO X201 with 8g of ram and an updated Hdd (seagate momentus xt 500gb with 4gb ssd).
    I had issues with the Hdd that where partially resolved with a seagate firmware update (the hdd kept going from standby to active mode without apparent reason and it was assumed to be a too agressive power saving mode...)
    Anyway, my issue here is the annoying chirping sound coming out the speakers during any audio playback (online audio streams, films, mp3, youtube... you name it!) anytime the Hdd is accessed.
    It even seems like everything just hangs for anywhere between 0 and 2 seconds at the exact same time.
    It only happens when on battery and using w7 pro 64bit. If I use ubuntu from my 8g sdhc card, it never occurs (even if I use chrome on both and watching the exact same youtube video). (NOTE that I did access the hdd from ubuntu to prove my point...)
    I think it is related to the power gestion of the system and I've tried a countless serie of different power management settings. It affect the frequency of the episodes (would occur more or less often) but it still happens.
    When plugged in, it never occurs....
    If it doesn't occur under ubuntu (I mean never!), it should not be hardware related, however the w7 way of managing power is different so I tend to think there IS a hardware issue (weakness) wich might be highligted by the OS.
    Anybody has a good lead on this?

    Hello Fafaneboat,
    It might be an issue with firmware of your system, I would like to suggest you please visit the below mentioned web link to download and install few drivers according to your Operating System. 
    support.lenovo.com/en_SG/downloads/default.page? 
    Kindly put your 7 digit TYPE-Model(3249CTO) number of the system in the Quick path
    1. Please download and update the Power Management driver and Power Manager(Please uninstall the previously installed driver and software first).
    2. Please download and update the BIOS of your system.
    To check the previous BIOS version and date, please click on START> type msinfo32> press Enter. It will open System Information Window. You can check the BIOS version and date from there. Kindly match the driver version and date and if the driver and download link have updated driver then please update the BIOS of your system.
    Please perform and check how it goes, It might resolve the issue.
    Regards,
    Harish
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Crashed during conform clip, now won't open compound clips!

    I have a project where I went inside a compound clip to conform the clip speed (it was previously retimed but shouldn't have been).
    At this point FCP X crashed. After restarting now I cannot open any compound clips in a timeline.
    This is deadly. I assume the project file got broken during the crash somehow.
    Is there any kind of autosave vault so I can rescue a previous version before it crashed?

    Magic Feather wrote:
    Yep.  This happend to us last week.  This is what you're going to need to do to get the cc back.
    Create a new project.  Drag the compound clip in question into it from your event browser.  Break the compound apart and you should be ok.  This will incur crashes at each step, but if you're patient you'll get it back.
    Did you start this project in 10.0.7 and update the project a few weeks back?  Sometimes little quirks like this happen when you update when you're in the middle of a project.  It's no consolation, I know, but I think that is where it's coming from.
    Please let us know if this works...
    Thanks. Will try that. Total pain as nearly a hundred compound clips in this project that were created to solve a different problem!
    Yes project started in 10.0.7 and updated to 10.0.8 yesterday.

  • Help with Audio Playback While Recording

    I am an aspiring sound engineer and I am having a problem with recording in Audition 3.0 that I need help with. When i record vocals, the sound wave plays back in the speakers/headphones with like a 1.5 second delay after it is recorded. It really throws off the artists I am working with when they are trying to record vocals. How do i kill headphone/speaker playback while someone is recording?

    There are problems with a lot of internal soundcards in a lot of laptops, and these seem to be so many and various that all you can do is use trial and error and hope for the best.
    External soundcards should cure any problem, but you may have to look into what else is running on the laptop, as so much is integrated, and some machines seem to have audio problems caused by wireless or other network adaptors etc.
    As I said, I use oldish Edirol and Tascam usb units. The Tascam has a known fault (noise when using a guitar channel at the same time as phantom powering a mic on the other channel) which I can live with, and I would hope has been solved in later and current versions. The Edirol is fine. I use 2 units to give me the connections I want (ie one has jacks, the other phono plugs, and different size headphone sockets). Both these have asio and wdm drivers and work fine with AA 3.0 here. More modern devices will be usb2 and will presumably provide more channels or higher sampling rates, but these are fine. Others will be more up to date than me, but I would think anything from Tascam, Edirol, Echo Audio and I think most m-audio models should be fine. Just be wary of anything from Creative Labs. I, too, have had bad experiences with one of their products (it drew too much current from the usb port on a couple of the laptops so I never got as far as to find whether it had asio drivers working or not). But others will be more up to date than I am.
    I just went onto ebay over the years and kept bidding on sensible looking devices until I got ones at the right price, but it probably is better to buy new if you can afford it.
    Sorry I can't give a more definite answer.

  • ITunes 11.1.3 issues - freezing during audio playback.

    Like many other folks on here, I'm having some playback issues with iTunes 11.1.3.
    Macbook (couple years old) 2.4 mhz 2 core- 4 gigs ram
    We use this computer primarily for music playback for dance classes and performances. Have run dozens of shows over the last year or so with zero issues.
    There *might* be a better playback software option, but iTunes doesn't get in the way with too many options, has (up until now) been rock solid, and has never let us down, and is less prone to user error causing huge WHOOPS during something important.
    That is, until 11.1.3. Didn't really notice any issues at first, but wife came home from a dress rehearsal Wednesday evening and complained - "it froze a couple of times while playing back Act 1. What's wrong with my computer?". (Act 1 - approx 50 minutes of music - 40ish total cuts).
    I looked at it - she had a ton of other stuff running - mail - wifi - DVDPlayer - iPhoto - you name it. I figured that was the problem, shut all the other stuff off, and figured it was solved.
    Nope - I'm running audio during our final tech rehearsal this evening before performances start in the morning.
    35 or 40 minutes in - froze again during a track.
    It just stopped - buttons became unresponsive - beachball came up - we waited a minute - and then it freaked out while trying to catch up with anything I had pressed, skipped around a bit, then resumed acting normal again.
    Took a short break - checked nothing else was running that didn't need to be and made some adjustments:
    Wifi off
    Cloud off
    Check downloads, sync, podcasts ... all off.
    Reset all warnings. Reset cache ( which took a surprising amount of time)
    Match and Genius, off
    Opened Acitvity Monitor and stopped any processes that were not essential
    Reboot ....
    Another 30 or 40 minutes later - froze again.
    Luckily, the lighting guy had a PC laptop with him. I quickly authorized his computer, transferred everything, and the rest of the evening went without a glitch.
    Not sure what to do next. I'm pretty sure it's NOT the computer.
    Disk checks OK. All hardware test are OK.
    Couple of observations:
    1. If I repair permissions - it finds a TON of messed up (?) iTunes permissions and fixes them. One day later, it find just as many again. What's up with that?
    2. If I watch disk access in the Actiity monitor during playback - on occassion there's a WRITE spike. Odd. What's it writing? This is with NOTHING ELSE running but iTunes, which didn't glitch during the spike, but still, what's that? A contributing factor? A clue?
    3. CPU and memory use looked OK. Haven't managed to get it to glitch again while I'm actually watching this though.
    Between what I've tried, and what I've read here, I'm pretty convinced our Macbook isn't at fault here. I'm pretty sure there's a problem with 11.1.3
    If anybody has other observations or suggestions, I'l love to hear them.

    Are these recent releases?
    I had troubles right after iTunes 10 came out because Digital copies were misreading "10" as "1" since the version check script was only looking for a single digit version number. Newer releases shouldn't have this, but if it's more than two years old, it might do this.

  • IOS4.0: Disable Auto-dimming during iPod playback while charging?

    Hi, I use my iPhone with a dashmount holder and an audio connection to my stereo via a cassette adapter. During playback, after roughly a minute, the screen will automatically dim itself (but NOT ever autolock). This means I have to tap the screen once to 'activate it' before I can tap any of the controls. Plus, I cannot clearly see what is on the display anymore when it is dimmed.
    This was not the case with 3.0 -> 3.1.3, the screen never dimmed and never autolocked when the phone was playing and charging.
    How can I fix this?

    I also noticed this. This needs to be addressed, it's really annoying.

  • AIC in a ProRes timeline=multiple crashes during audio edit

    I have three clips in a ProRes 1440x1080i60 sequence. Two were capture into FCP ProRes, the other was captured into iMovie08 1920x1080 AIC.
    Curiously, the AIC clip shows up as 1440x1080 in the Properties database.
    When rendering the T/L I get an error about the codec not supporting the frame size (??)
    I finished the rough cut and now am working on the sound track, adjusting levels and normalizing.
    First I separated one camera's stereo channels into two, moving one, copying the other and placing it into the original R channel...FCP crashed.
    Next I just muted the R channel and moved the Pan for the L channel to center. Then I was working on levels, adjusting the keyframes, and up popped the twirling beach ball of death.
    I sent off the report and tried 'er agin. Same thing--while editing the keyframes and playing back, it hangs, then crashes.
    All audio clips report in as 48khz 16bit.
    Any ideas?

    So, what happened to the idea of a codec agnostic timeline?
    BTW, this time, I just restarted and kept saving every few actions and it never crashed. Finally finished the segment.

  • Itunes crashed during a restore, now won't open. Reinstalling didn't work and I can't unistall or I will lose my backup.

    Hi, I've been having issues with my 4s freezing and restarting itself  after I updated, so I brought it to an apple store. I was told I have to  restore it, and since I didn't have enough space on icloud for a full  backup I took it home to do it. I don't sync my device with my computer  because it's a POS, so I'm using my partner's. I installed itunes, then  had to uninstall and reinstall it because it kept crashing when I opened  it. After the reinstall it worked, and I went through the restore until  itunes crashed either right after the restore or right at the end of  the restore. Now itunes crashes as soon as I try to boot it up. I tried  running the installation again to repair itunes but it still crashes. I  can't uninstall itunes because I don't want to lose my backup. Is there a  way to fix itunes without losing my backup? Thank you. I would call  apple but I can't :(

    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    More Info here  >  https://discussions.apple.com/message/19521062

  • FM9 crash during show/hide of conditional text

    I'm having a vexing problem with two of my chapters: whenever I attempt to show/hide the conditions, FM9 crashes with "Internal Error 9004, 6921852, 9677150, 0. Framemaker has detected a serious problem and must quit".
    A few things I've tried (as culled from posts on here):
    Updating to FrameMaker p250 from p237
    Saving as .mif, then opening and saving as .fm
    Changing the conditions on all chapters with the book open
    It's somewhat unpredictable. Saving as a .mif, then opening and saving as .fm worked once, but after performing an edit to the doc, it crashed again when toggling the conditions. Similarly, changing the conditions to all chapters with the book open seemed to avoid a crash, but trying it again crashed when it reached the problem chapter.
    It's definietly something in the file, as my co-worker will occasionally get the crashes with the the same chapters when showing/hiding conditions, but not always.
    Other details:
    My XP installation is up to date with all the Microsoft updates
    I'm using FM9 (unstructured)
    The docs in question are not "fresh" per se, but have been upgraded from FM8 to FM9
    Also:
    Our documents have conditions A, B, C, and D.
    In previous versions of Frame, we had been using the shuttle box interface for showing/hiding conditions: show A and B, hide C and D.
    Starting with FM8, we started using equivalent logical expressions: NOT "C" AND NOT "D".
    The crashing appears *not* to occur if I use the shuttle box interface. However, I'm told that we have use the logical expressions for some reason.
    Any ideas are appreciated. Thanks!

    SOLVED
    Here's my fix for Internal Error: 9004, 6921852, 9677150, 0 when saving as PDF, printing PDF, or printing to PS from FrameMaker 9 using Acrobat 9. YMMV.
    I could not reproduce this  Internal Error: 9004, 6921852, 9677150,0 when using conditions, so I do not know if this solution fixes the condition-provoked instance of  Internal Error: 9004, 6921852, 9677150, 0.
    Anyway, I uninstalled FM, rebooted, searched for leftover files, deleted them, rebooted, uninstalled Acrobat Pro Extended 9, searched for leftover files and registry entries, deleted them (probably missed a few), rebooted, removed the Xerox Phaser PS printer driver for my local printer (because it was PostScript, figured I should), rebooted, installed the Xerox Phaser PS driver, rebooted, installed FrameMaker, rebooted, installed Acrobat Pro Extended 9, rebooted, installed each patch for FrameMaker and Acrobat Pro Extended 9, rebooted, installed the MS Hotfix discussed here (http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html), and rebooted.
    All is now well for making PDFs.
    Sean

  • Record audio playback while recording

    I would like to record audio (from a radio) and be able to play it back while it is recording or at a later time. I can do this with DVD-RAM DVD recorder but would like to do it in a simpler manner.

    LineIn might do, or Soundflower.

  • Illustrator CC crashes during splash screen.  Can't Open!

    Running OS X 10.9.2.  Tried restarting computer and also logging out and back on to CC.  Still can't open.  Help!

    Katie,
    Just to make sure, are all the faces of the Verdana and Tahoma fonts installed and enabled/activated through the OS (not font mangement) as TTF (not OTF)?
    There may be other causes.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Ipad crashed during sync and now can't open at all

    screen says iPad disabled and in small print it says
    ipad restoring to iCloud.   but it won't open to code page or allow me to hook up to iTunes.

    Hi DJPHR34K,
    Welcome to the Apple Support Communities!
    I understand that your iPad is disabled. To help resolve this situation, please work through the suggested steps located int he attached article. 
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Best regards,
    Joe

  • Adobe Reader crashes during flattening process while attempting to print

    I have a user who is suddenly unable to print some PDF files.  The files were created in Illustrator.  I disabled Enhanced Security Protection on my machine, and was able to print.  I could not before that was disabled.  I disabled it on hers, and Adobe Reader still crashes.  I have removed Reader using the Adobe Reader and Acrobat Cleaner Tool from Adobe Labs, and I have reinstalled version 11.0.0.8.
    Does anybody have any experience with this?  I have tried to several different printers.  It seems to be the flattening process that is crashing.  I have her using the "print as image" option for now.

    Hello,
    Could you please suggest the Illustrator version at your end? Also what is job option settings at your end?
    ~Deepak

  • Use Bluetooth headset during audio playback

    When I listen to an audio file, the audio plays on my iPhone external speakers. I want to change this to my Bluetooth headset (which I use quite often for the phone app), but I don't see any way to do this. Any ideas?

    I'm assuming
    I would look at the directions for my headset to find out?

Maybe you are looking for