Crash during picture transfer with Camera Connector

I searched on various places and have found some people have similar issues but I have not seen a solution.
I have a Casio Exilim EX-Z4 and a brand new iPod Video 80Gb. For my holiday, I borrowed a Camera Connector from a friend of mine and briefly tested the combination with a couple of pictures on the SD card of the Casio camera. This worked fine.
However, it did turn out not to work well. As the SD card contains approx 100 pictures, I left the iPod alone during the copy. After a while, it appeared to have finished. But looking at it, only 30 or so pictures had been copied. And even worse, the iPod did not work as it did before. It could not play any media anymore.
A reset did the trick, but it did not solve the Camera Connector problem. Next import, the same happened but then the pictures could not even be seen on the iPod. Had to reset again. I tried several times, different SD cards in the camera, all the same predictable result.
Coming home, iTunes suggests a firmware update to 1.2.1 so I hoped this would solve the problem. Unfortunately not, I am still unable to use the Camera Connector and have to reset the iPod when I try to do.
Is there any solution to this?

I had the same problem with an 80GB Ipod and a Canon s50. I found that the only way to get back the ability to play the media was to drain the battery completely, and then recharge. Things would work then. When I went to look at my photos, I noticed that the "difficult roll" had only transfered 49 of 500 pictures, and you couldn't view any of the transfered pictures. I deleted the roll but was never able to successfully transfer the pictures from the card - I tried 3 times with the same result. I'm actually returning the camera connector and the Ipod.
Dell Windows XP

Similar Messages

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Viewing photos imported with camera connector

Hello,
I just purchased a camera connector and was immediatedly able to import photos from my camera with no problems. However, the manual states that I should be able to view the photos by (1) Choosing Photos > Photo Import, and then choose the roll I want to view and (2) Choosing Browse to display my photos.
The problem I'm having is that after I choose my roll it only shows the roll info (11 photos, size 17.3 MB) and options for Delete Roll or Cancel. There is no Browse.
I'm using a 60 GB Video iPod with version 1.2 firmware.
Any help would be appreciated. I've already searched the discussions and didn't see anyone with this exact issue.
Thanks.
MacBook & G4 Quicksilver Mac OS X (10.4.8)

False alarm I guess. I didn't change any settings on the camera or iPod, but now I can browse through the imported pictures. Curious.

Does iPod Nano work with Camera Connector?

Is the iPod Nano able to work with the Camera Connector? How about the Belkin Camera Connector or Belkin Media Reader?

6GB nano we might see in a year, a 20 GB nano is presently only a fantasy and while eventually possible, we won't be seeing it anytime soon. To my understanding the belkin media reader uses firewire to communicate among other things so no it wont work with the Nano. And of course the Nano is windows preformatted windows compatible.

Mics and audio interfaces that work with Camera Connector

FYI: After playing with the Camera Connector I have been able to connect USB recording gear for use with MultiTrack DAW app on the iPad. The Blue Yeti, Samson's GTrack and Roland's Cakewalk Audio Interface all work for inputting audio. All three have internal headphone jacks which work for monitoring both the input and multitrack recordings.
One caveat with the Yeti: it appears to be almost at the limit of the power that the iPad's USB Camera Connnector can supply. Some headphones and earbuds shut down the mic. Sennheiser HD280 phones work fine, but some of the Sennheiser buds don't.

It has been reported before that a lot of USB audio devices (e.g., headsets, microphones). As an example see:
http://www.electronista.com/articles/10/04/24/ipad.has.native.usb.support.for.ma ny.devices/

IPad won't detect iPhone with camera connector

So I got the camera connector kit and wanted to use it to transfer photos from my iPhone 4GS to my iPad 1. Unfortunately, the iPad doesn't detect it, it just sits there. How do I fix that?

According to the support page: "In addition to supporting digital cameras and SD cards, you can also import photos and videos from your iPhone*, iPod touch, and iPod nano (5th generation) using the Camera Connector."
http://support.apple.com/kb/HT4101

Card Reader that works with Camera Connector!!

Yes, for a mere $12,000, I'll give you the info as to the brand name and where to get it...
OK, but seriously, I was at Surplus Computers in Santa Clara yesterday, and they have all kinds of weird parts 'n stuff. I picked up an OLD Belkin Dual USB Media Reader for CompactFlash & SmartMedia (toldja it was old!)
When I got home, I hooked it up and successfully transferred some pix from one of my CF cards. The thing was only ten bucks!!
I tried to look on Surplus Computer's website to see if it was listed there, but no dice. Guess you gotta hit the store in person.

Just discovered today - a Compact Flash Media Card Reader that connects to the iPod Photo (30 gb) with the Apple camera connector. Best of all is that it only costs $15 Canadian.
Thank you to The Source (used to be Radio Shack in Canada) and London Drugs computer department employees who let me bring in my iPod to test on all their Media Cards.
And the winner is:
London Drugs - Simple Perfection Card reader/Writer Model CR-T2-UC. This is a USB 1.1 device that comes with a cable (not required). Supports both Type I & II Compact Flash cards or IBM MicroDrive. Plug & Play.
Procedure - CF card into Simple Perfection. Turned on iPod and plugged in Apple camera connector - iPod reads "Connecting". Plugged in Simple Perfection - iPod reads downloading or some such comment. 2 Menu selections and download begins.
Results/specifications:
Sandisk Ultra II 512 mb card with 100 images totalling 260.74 mb (each image about 2.33 mb) took 9 minutes. These images are 3008 x 2000 in size (Fine). Perfectly acceptable. iPod still at about 3/4 power which is where I started.
Sandisk Type I 512 mb card with 20 images of about 2.33 mb each took 1 minute (very close to 2 minutes). Also acceptable. Same resolution. Still 3/4 power left in iPod which is were I started.
iPod to Mac computer and all downloaded perfectly.
The reverse side of the Simple Perfection case shows that this device is available in 10 countries - sorry but I don't know all the flags - NOT USA but Britain, Australia, France, Japan, Italy, + + +. CD in the package too but I won't be setting up on a computer as I already have card readers on my computers.
By the way I use NIKON 5000, 8700 and D70s (SLR) and all 3 download to iPod with the camera connector - make sure you have PPT enable.
Hope that helps all! I am most impressed with this little $15 device! Yahoo! Yippee!

Problems with camera connector

hi,
i have a 5th generation iPod & a canon eos 20d. I have used the camera connector a few times but for some reason then i transfere pictures from a 2Gb CF card it does not move all the pictures. My estimate is that I get about 50 of the 300 pictures i have in the camera to the iPod...
Any ideas what I should try?
/mike

try this link. hope this would help.
http://docs.info.apple.com/article.html?artnum=303474

Desktop Manager Crashes During Sync Phase with Notes Calendar

Hello All,
My Destop Software continually crashes at the point of Syncing with Lotus Notes Calendar. Every other part of Syncing with Notes works fine and sometimes I get a partial Sync with the Calendar, but consistently every time it crashes during this part of the process and then I get the Windows error window saying the software has encountered a problem and needs to close. Here are some other facts to help.
I am running V4.7 of the Destop Manager, latest downloaded from this web site.
PC is Win XP Proffesional, 2002 SP2. 3Gb RAM Duo Core 2GH
I have uninstalled/re-installed the Desktop Manager twice
I get other C Runtime errors with Device Manager on a random basis.
I have a BB Storm.
Anything else?
I have emailed the BlackBerry Support but seems to be a Black Hole with no response despite prompting them several times since putting in the email. I am a relatively educated PC user, My laptop is near new, I have many simple and sohpisticated applications installed with a (other than the BB Desptop application) very clean, well maintained and error free operating environment. This is a very disappointing BB first time experience.

Hi and welcome to the forums!
What version of Lotus notes would that be?
Is this is this server based, an island, or standalone Lotus notes?
Are you setup as BES or BIS?
Thanks,
Bifocals
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB01870&sliceId=1&docTy...
Message Edited by Bifocals on 12-23-2008 08:46 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Nikon D40 and/or Sandisk Mobilemate SD+ work with camera connector?

Wondering if anyone has successfully dumped images from their D40, or via the afore mentioned SD card reader, to their iPod using the camera connector. The D40 is not on the list, and no mention of card reader either, but I've read other places that some devices work even though not listed.

Im using the connector with my D40 - but there are some odd quirks that keep poping up. The photos are fine on the ipod when you use it as a HD - but sometimes the photos dont show up under "photo-import"... not sure why. I restored and it worked... occationally you have to hard-boot reset your ipod and then it is ok. download frequently to avoid long 200-photo transfers (try 100 or less). Each D/L will create another roll to browse (even if its the same photos you just D/L'd)

Canon EOS 300D with camera connector

Is it possible to connect a Canon EOS 300D via iPod camera connector to a 5th generation iPod?
The EOS 300D isn't listed in the compatibility list, but i'm sure the camera supports the protocols.
Any experiences?
Thanks, Krycek
/edit: I recognized the thread before, but I like ro hear more experiences.

Is it possible to connect a Canon EOS 300D via iPod
camera connector to a 5th generation iPod?
The EOS 300D isn't listed in the compatibility list,
but i'm sure the camera supports the protocols.
Any experiences?
Thanks, Krycek
/edit: I recognized the thread before, but I like ro
hear more experiences.
i, use it and works but is very slow....

IPhoto crashed during file transfer. Cannot recover photos by rebuilding the library and there is library size discrepancies.

Hi,
I am using an iPhone 4S and running iPhoto '09 version 8.1.2 (204) on OS X (version 10.9.2).
I was transferring photos from my iPhone to iPhotos with the option of deleting the originals on the phone after transfer. IPhoto crashed at some point and I had to "Force quit" the application.
Now, 3/4 th of all my pics is deleted on my iPhone and they are not in iPhoto either! I tried repairing and rebuilding the library as suggested elsewhere on this forum but nothing has worked.
The library size is currently 11.6 GB but the rebuilt library is 5.6 GB. I think the library was around 5 GB as well before transfer. I also tried using the "iPhoto library manager" to rebuild the library. There is no difference between the pictures in the rebuilt library and the default library, but again the new, rebuilt one is 11.6 GB and the library it uses for rebuilding 5.6 GB! So, I think the pictures are there somewhere but I am not recovering it.
Any suggestions as to how to recover deleted photos from my iPhone or to restore the iPhoto library would be muc appreciated.
Many thanks,
P.S. I do not have a recent iTunes or iCloud backup.

If you sync photos between the Mac and other devices via iTunes there will be an cache folder created that will grow over time. That's what the new library doesn't include and, in part, is the reason for the size discrepance.
iPhoto 8.1.2 is only marginally compatilbe with Mavericks and, as Linc suggested, should be upgraded to iPhoto 9.5.1 to be completely compatible.
OT

Indesign CS5 crash during startup - problem with Graphics.rpln

I work in an architectural company and already several of our computers have experienced this very rare and unusual behaviour. During start up of Indesign (not clicking on any file but just launching Indesign) it crashes with the following error:
"Adobe Indesign CS5 has stopped working"
We use Windows 7 64bit, so the first step I did - I went into Application Log which says, so appears to be a problem with Graphics.rpln.
-=-=-=-=-=-=-=-=-=-=-===-=-
Fault bucket 1848500921, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 7.0.0.355
P3: 4bad00be
P4: GRAPHICS.RPLN
P5: 7.0.0.355
P6: 4bad03d3
P7: c0000005
P8: 0004e1e2
P9:
P10:
Attached files:
C:\Users\User\AppData\Local\Temp\WER162E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\User\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_b042 ec9a818cb8fb57eefe0aacb41c22fdcbb8_10c12aa8
Analysis symbol:
Rechecking for solution: 0
Report Id: 9e59fc2c-5b68-11e3-908c-f46d0497fc9b
Report Status: 0
-=-=-=-=-=-=-=-=-=-=-===-=-
I have tried everything I could think of - removed and reinstalled Adobe CS5, manually removed Adobe folders under %Appdata%\Local and %Appdata%\Remote folders (why can't Adobe delete those things during uninstallation is always a total mystery), changed video adapter drivers, cleaned Temp folders, everything I knew...
None of the other apps like Photoshop or Illustrator CS5 malfunction - only Indesign. What is going on?
Can it conflict with other software we use? We have Bentley Microstation, 3D Max, Office 2010, Kaspersky Antivirus and LOGMEIN installed on this computer...Any clues, guys?

Looks to me like you've never installed any of the patches. Last patch for CS5 was 7.0.4, so I'd start with that and see if ti helps.

Pictures taked with Camera are not saved.

When taking pictures using my iPad Air the app functions normally but the pictures are not saved to the iPad. Am I missing a setting somewhere in Settings?

Yes, they are on the "Camera Roll".
When I had iPad (the original) these are saved pictures from various apps (Facebook, Wikipedia, emails, ......)
When I up graded to iPad Air everything transfered over. Thus pictures are stored in "Camera Roll".
This still does not explain why pictures taked on the iPad are not saved anywhere.
Thanks for the response.

DiskWarrior crashes during file transfer/backup..

Guys, im able to get thru the Original and Preview pane of DW...there was a pop out that i need to backup my files as fast as i can because my original directory is damaged..so i backup/transfer all my files in Preview to my external hd...and after i copy 10GB files out of my 330GB it shows some errors the progress window dissapear out of nowhere..wth..i dont know what to do next and i tried thrice and it crashes again and again. pleaseae
Need your inputs..Thanks!!

Ok i finally found out that its advisable to copy every folder one a time rather than copying all then paste to your external hd...now ive done all the file transfer i still can see the REPLACE button is still greyed out..is there any chance that i can continue the rebuild/replace of my directory then install ML? or ny hd needs a replacement?

Crash during picture transfer with Camera Connector

Similar Messages

Maybe you are looking for