Crash straight after project loads
i have a project i'm working on that all of a sudden is crashing 5 seconds after it successfully loads up.
i've tried some troubleshooting like deleting the last few audio files i've added, and disabling core audio and loading the project up (loads fine, but then crashes when i enable core audio again).
all other projects are loading up fine except this one.
any help would be much appreciated thank you.
aj ok
thanks for your suggestion... i tried it and none of the plugins appeared to be corrupting the project. after re enabling them all however the project was somehow "cured" and is no longer crashing on opening. still coughs and splutters quite a bit as core audio is engaged when the arrangement opens, but i appear to be back on track! i'll keep this thread "not answered" for a few days though just in case
Similar Messages
-
7.1 crashes straight after logon, Windows 8.1
7.1 crashes straight after logon, Windows 8.1
Was fine before the update.
How do I send a DX log? if I paste it. it says it's too many characters and it will not let me attach a txt file.
Solved!
Go to Solution.ruwim wrote:
revocomputers wrote:
Doh! of course thanks.
Skype crashes were caused by Hauppauge WinTV tuner application
Video Capture Sources:
Hauppauge WinTV 88x Video Capture,0x00200000,2,5,ksproxy.ax,6.03.9600.16384
See also this similar case:
http://community.skype.com/t5/Windows-desktop-client/Skype-crashes-when-starting-up/m-p/3801709#M319...
The master has answered with something I didn't know about, ignore what I wrote
Anthony
This post was by Anthony- I do not work for Microsoft!
If this solved your issue - Mark it as a solution! If you like my post - Please add Kudos!
Spotify Community Profile - Anthony
Feel free to PM me - Here -
FCP Crashes "quits" after partial loading of project.
After reinstalling the OS and the program.
FCP ran perfect.
I took a 3 day break from editing, now the project will not completely load.
I get exactly 41% in, then it quits. (1.2mb total size)
Will trashing the preferences work?
-TonyOK, this may not be simple. FCP wil sometimes seem to keep track of files moved within the same drive. But try this: Locate the folder where all your media is on your hard drive. Move it to another folder. It would be better if you kept your media on an external drive if at all possible, so perhaps the solution is to purchase an external firewire drive (make sure it's formatted macosextended or reformat the drive to macosextended) and move your media to it. Be aware of the distinction on the mac between moving files and copying files. When you drag files between drives, you are copying them. When you drag files between locations on the same drive, you are moving them. If you move the files to an external drive, you will have to delete the original files to break the link in fcp. Reconnecting the files should not be a problem once we get past the project load problem.
-
Premiere pro CS4 crashes after project loads, any suggestions?
It used to just crash and I would just open premiere back up and it would eventually load and be ok. Usually would take two tries to load. But now it is actually crashing my computer! I can get it to load after several tries, but waiting for my computer to reboot isn't cool! I'm running XP proffesional.
Thanks in advanceBill,
Thanks for the advice. Today I went to work on the project it opened fine but then it crashed 3 times on me.
First time I tried top replace a small clip in Audition and it worked fine UNTIL it sent it back to Premiere then crashed.
Second time I clicked on another window. The projects froze and tried to rebuild the peaks of the large file.
'My computer specs are:
Intel E5530 @ 2.40 GHZ 2 processors. 64 Bit. With 1TB of memory.
I have Windows 7.
I used the "HIGH PERFORMANCE PLAN" under power usuage.
Does anybody know what could be causing this?! It's so unbelieveably frustrating. -
OracleXE crashes straight after install (CentOS 4.5)
I Installed the Oracle XE rpm:s (client and server) and then run /etc/init.d/oracle-xe configure as instructed. I did not change any port assignements from the defaults.
After this, no Oracle server was running, and I finally found out that it had crashed, leaving a trace file in /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_3142.trc.
Any ideas?
This some exerpts from the content of the trace file (please mail me at [email protected] for the whole file):
/usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_3142.trc
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
System name: Linux
Node name: bhw-dev
Release: 2.6.16.29-xenU
Version: #2 SMP Thu Dec 7 21:12:11 CET 2006
Machine: i686
Instance name: XE
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 3142, image: oracle@bhw-dev
KCCDEBUG_LEVEL = 0
Running with 1 strand for Non-Enterprise Edition
Running without dynamic strand for Non-Enterprise Edition
Dynamic strand is set to FALSE
Running with 1 shared and 10 private strand(s). Zero-copy redo is FALSE
*** 2007-10-31 11:03:06.670
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Current SQL information unavailable - no session.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+27 call ksedst1() 0 ? 1 ?
ksedmp()+557 call ksedst() 0 ? F6C70F4 ? 8000000 ? 0 ?
B7FAB6A4 ? 81A637B ?
082EDFA7 call ksedmp() 3 ? BF8A3048 ? AC138F3 ?
C6DF580 ? 3 ? C6DD364 ?
kgerinv()+177 call 00000000 C6DF580 ? 3 ?
kgeasnmierr()+40 call kgerinv() C6DF580 ? C743924 ? BEB5D40 ?
2 ? BF8A3080 ?
keltnfy()+223 call kgeasnmierr() C6DF580 ? C743924 ? BEB5D40 ?
2 ? 0 ? 2E ? 0 ? 0 ? 1 ? 0 ?
kscnfy()+486 call 00000000 F ? 2892D108 ?
ksucrp()+1392 call kscnfy() F ? 2892D108 ?
0A124112 call ksucrp() 0 ? BF8A35AC ? B7FAB650 ?
11 ? B7B63AA8 ? 1 ?
opistr()+201 call 0A123D18 30 ? 2 ? BF8A59C0 ?
opiodr()+835 call 00000000 30 ? 2 ? BF8A59C0 ?
ttcpip()+1839 call 00000000 30 ? 2 ? BF8A59C0 ? 0 ?
opitsk()+1027 call ttcpip() C6E6D80 ? 30 ? BF8A59C0 ? 0 ?
BF8A4E9C ? BF8A5AD0 ?
opiino()+821 call opitsk() 0 ? 0 ?
opiodr()+835 call 00000000 3C ? 4 ? BF8A6590 ?
opidrv()+466 call opiodr() 3C ? 4 ? BF8A6590 ? 0 ?
sou2o()+91 call opidrv() 3C ? 4 ? BF8A6590 ?
08288137 call sou2o() BF8A6574 ? 3C ? 4 ?
BF8A6590 ?
main()+111 call 082880C2 2 ? BF8A65C0 ?
__libc_start_main() call 00000000 2 ? BF8A6684 ? BF8A6690 ?
+211 B7FA0056 ? B7B13FF4 ? 0 ?
(removed bin ary dump)
Symbolic dump of process state object:
KSUPRFLG = 0
KSUPRSER = 1
KSUPRIOC = 0
KSLLALAQ = 0X00000000
KSLLAWAT = 0X00000000
KSLLAWHY = 0
KSLLAWER = 0
KSLLALOW = 0
KSLLAPSC = 0
KSLLAPRC = 0
KSLLAPRV = 0
KSLLAPSN = 0
KSLLID1R = 0
KSLLID2R = 0
KSLLRTYP = ''
KSLLRMTY = 0
KSUPRPID = ''
KSUPRUNM = ''
KSUPRMNM = ' KSUPRPNM = ''
KSUPRTID = ''
KSSRCOBJ = 0X00000000
KSSRCFRE = 0X00000000
KSSRCSRC = 0X00000000
KSSRCDST = 0X00000000
KSASTQNX = 0X2892D37C
KSASTQPR = 0X2892D37C
KSASTRPL = 0
KSUPRPUM = 126357
KSUPRPNAM = 185197
KSUPRPRAM = 131072
KSUPRPFM = 0
KSUPRPMM = 316269
KSFD PGA DUMPS
Number of completed I/O requests=0 flags=0
END OF PROCESS STATEThis very known issue , check following link to over come this issue.
To over come this issue make sure /etc/host have 127.0.0.1 and host entry like given below
127.0.0.1 localhost.localdomain localhost localhost.domain
xxx.xxx.xxx.xxx hostname hostname.domain
check more on following link
Getting ORA-600 error after XE installtion
- Virag Sharma
http://viragsharma.blogspot.com/ -
Windows Media Player Crashes straight after starting program.
Hi Guys,
Can Anybpody help me resolve the followiung ....
I am running Windows 8.1 x64 on my unit (M6 Envy 1205sa).
I am facing the following problem:Hello again @J-Singh,
I have a couple other suggestions for you to try to fix your Windows Media Player. First to lets try removing Windows Media Player and putting it back to see if it helps. As Windows Media Player is part of your Windows operating system it is not removed and added in the traditional sense, but a feature of the operating system you can remove and put back. Please follow the steps I have set out below to remove and put Windows Media Player back:
Step 1. At your Tiles Menu type "control panel"
Step 2. Click on Control Panel
Step 3. Click on Programs and Features
Step 4. Click on Turn Windows features on or off
Step 5. Click on the + beside Media Features
Step 6. Uncheck the check mark in the check box beside Windows Media Player
Step 7. You will receive a warning message simply click 'Yes'
***It will take a bit of time, but once it is finished removing Windows Media Player restart your computer.
To turn the Windows Media Player feature back on simply follow the steps above only put the check mark back in the check box.
Now if the above steps do not work we are going to try to fix any corrupted files on your computer. To do this follow the steps I have set out below:
Step 1. At your Tiles Menu type "command prompt"
Step 2. Right-click on Command Prompt
Step 3. Click on Run as administrator
Step 4. Type "sfc /scannow" and hit Enter
***This will take a bit let it run it's course
Now the above steps will look for any corrupt files in your operating system and fix them. If they do not resolve your issue it could be with a file that is not part of the operating system in which case I would like you to follow the next set of steps below:
Step 1. Open My Computer
Step 2. Right-click on C: and choose Properties
Step 3. Click on the Tools Tab
***Windows may tell you that you don’t need to scan the drive, as Windows hasn’t found any errors on the drive. Ignore it and continue
Step 4. Click Scan Drive
***Windows may tell you about any problems it encounters and asks for your permission to fix them. Go right ahead and have it fix them.
After you have checked your disc for errors ensure that you restart your computer.
Now it none of the above work the only thing left it to backup and recover your operating system back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
MY FIREFOX & OUTLOOK CRASH UNEXPECTEDLY AFTER I LOADED THE LATEST FIREFOX UPGRADE, WHY?
FIREFOX BROWSER & OUTLOOK CRASH UNEXPECTEDLY FOR NO REASON.
You have a possibly corrupted user agent that identifies you as Firefox/3.5.13
*Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.13) Gecko/20100914 AskTbLMW/3.11.3.15590 Firefox/3.5.13 GTB7.1 ( .NET CLR 3.5.30729; .NET4.0C) FBSMTWB
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
Illustrator CS3 Crashes after "Error Loading Plugins"
so confused.
Upgraded to a new PC with Windows 7 64bit Enterprise.
Installed my CS3, and Illustrator crashes after "Error Loading Plugins".
I moved the .aip files in question from the folder to my desktop, then put them back, but 3 are still there. The other 3 resolved.
Took the 3 in question back out, then back in. no change
Left the 3 out. No "Error Loading Plugins" but still crashes with a "stopped working" non descript message.
I have been trying to search all over the net for six hours to no avail. Help me Obi Wan Kenobi, you're my only hope.with Enterprise edition you should be able to download from Microsoft a winXP32 bit virtual OS and run CS3 Ai in that mode.
-
Hi all,
I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. In an attempt to solve crash issue, I've installed Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
thanks,
korriefromcaHi
korriefromca wrote:
My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
You would only save about 500MB by deleting MS 2.1.3. You may find it useful to keep the application, or perhaps to make a zip and then delete the original
CCT -
AIR App Crashes iOS After Loading Remote Image
I have had this problem both with the latest official AIR SDK 3.3 (3.3.0.3670) and 3.4 release (3.4.0.2540) when doing a Standard build. I am loading a few files one after the other from a remote server on an iPad. After loading some xmls and swfs successfully, my app crashes and closes without any error message upon loading an image file (I've tried both png and jpg with the same result). I have both progress and complete event listeners on the loader and the crash happens after all bytes are loaded and before the complete event triggers. So it seems as if there is some problem with initializing/decompressing the image. The crash log reports things along the lines of "EXC_BAD_ACCESS" and "KERN_INVALID_ADDRESS."
This problem does not occur if the files are loaded from the application directory --- only when they are loaded from the remote server. It is also not occuring with the preview AIR SDK 3.4 with iOS6 Support release (3.4.0.3010). It is also not occuring on the desktop simulator (adl) or the Fast mode debug option.
Right now all I can gather is that it is a bug with the AIR SDK that seems to be resolved in upcoming versions, however I am due to submit my app to the app store September 4th so I don't really have the time to wait!
Please advise on how I can go about tackling this issue.
The issue occurs with any combination of the following:
Flash Builder 4.6
Flex SDK 4.5.1 or 4.6
AIR SDK 3.3 or 3.4
iPad 1/2/3 with iOS 5.1.1Hi,
Could you please consider it raising via bugbase.adobe.com and share the bug number here for reference. Also, we would request you to attach sample source files which can replicate the issue.
-Thanks for reporting it.
Pahup -
Firefox 8 Crashes immediately after clicking the icon. (Won't load safemode either)
Firefox 8 crashes immediately after clicking the icon. It does not even show the windows for a second. It immediately goes to the crash reporter. I tried holding shift while opening firefox to load safemode, but the problem is still there.
Crash report:
AvailableVirtualMemory: 4075601920
BuildID: 20111104165243
CrashTime: 1325436524
InstallTime: 1320870265
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 336
StartupTime: 1325436519
SystemMemoryUsePercentage: 81
Throttleable: 1
TotalVirtualMemory: 4294836224
URL:
Vendor: Mozilla
Version: 8.0
This report also contains technical information about the state of the application when it crashed.See also [[Latest Firefox issues]] and http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
(For the record) "More system details" includes the crash Report ID:<br>
bp-22454cd4-00b4-489f-bb8a-509772120101
Crash Report: https://crash-stats.mozilla.com/report/index/bp-22454cd4-00b4-489f-bb8a-509772120101
Firefox 8.0 Crash Report [@ JSObject::getGlobal() ] -
I'm really not sure what is going on, some days ago it was working fine and now after AE loads I get the blue screen of death and the computer restarts.
I removed AE and re-installed it, ran check disk and virus software and nothing works.
My computer is up to date and I am running Win XP 32bit (SP3)
Intel Core i7 920, 6gb of ram and a EVGA 8800GT OC on a EVGA Mobo x58 sli le.That effectivels re-creates the preferences with their defaults. They were probably completely messed up during your first crash and thus caused the consecutive crashes whenever AE attempted to read its config data.
Mylenium -
PrE 4 Opens, Then Crashes When Project Loads
I realize that Premiere Elements 4 is old, but I still like and use it for all my projects. Here's my problem: I've been running PrE 4 for months on my new 64-bit Win 7 HP laptop, but only today it started going bonkers. It opens just fine, but when I open a project, it minimizes the PrE window as soon as it loads. Even though I've tried re-opening the window, it refuses to return to full screen.
I've tried compatibility to Vista and even XP, running under administrator priveleges, but to no avail. Is this a result of a newly-installed program or a virus? I'd love to get back to editing...Thank you for the info.
There is one thing that I need clarification on - do you mean that you can no longer Open a New Project, one that is empty? If so, then you can ignore the test below, though we might come back to that, if we can get PrE to Open a New Project.
When you say "raw AVI files," are these DV-AVI's, a particular form of AVI? This ARTICLE will give you more background on file formats.
You mention WMA Audio files. Like an AVI file, those can contain a lot of different stuff, but more on that in a moment.
With Win7-64, 4GB RAM is about what Win7 needs to run, and that does not leave a lot of excess for programs.
Now, Projects can become corrupted, or unstable, due to many things. Assets in a Project can become problematic. One way to test a Project for "bad" Assets is to make sure that PrE is closed, and then "hide" the Assets from PrE. As the Project file, the PREL, does not contain any of the Assets, but only follows absolute Paths to those Assets, this is farily simple. How one has structured their Assets folders can greatly simplify this task, or can cause a bit of work. It sounds as though your Project is pretty simple so far, and should not be difficult to follow these steps for testing:
With PrE closed, go to the folder(s), where the Assets are located, and Move the folder(s) elsewhere. Remember, the PREL uses absolute Paths,so that original Path will no longer apply. At this point, I would also separate Assets by type, say with Video files in a "Video" folder, Still Images in a "Stills" folder and Audio files in an "Audio" folder. You will see why in a moment.
Launch PrE, and Open the problem Project.
One will be confronted with a message dialog box, asking "Where is file ______?" Since we moved those Assets, we need to help PrE find them. Just navigate to the Moved folder, where that first Asset is located. The dialog screen offers a Finder, but since you Moved things, you should have that info handy. Locate the first file, that PrE is asking for.
Once you find it, PrE will do two things: establish the new link, and then look in that folder for any other Assets, used in that Project, and link to them also - pretty neat, eh?
Since we separated our Assets by type, if the first type, say Video, loads fine, we can rule those out. If the Project crashes here, we have found at least one problem.
When PrE comes to the next Asset, that dialog screen will reappear, and we will do the same thing - locate the file, that PrE is asking for, and again, PrE will re-establish the link to it, and search that folder for any more Assets. If all goes well, we can probably rule out those Assets as an issue.
This will repeat, until either the Project loads, or until the Project crashes, or hangs. If that happens, we have narrowed things down to one Asset type. This is why we separated them - it makes troubleshooting Assets much easier. Note: Titles are written in XML code, in the PREL, so nothing tangible exists for them, at this point.
Whatever you do, do NOT choose Save, and especially if you decide to Skip Media, or Cancel. Only do a Save_As,so as to NOT overwrite your original PREL. Never overwrite an original PREL, if you are having issues.
Please report on this test. Does the Project fail with a particular Asset type? If so, what is that Asset type?
If you have quite a few Assets of that particular type, you can redo the test, by moving, say half of those Assets again, and running the test again. If the Project crashes with either the first half, or the second, you are getting closer.
Good luck,
Hunt -
On some conversations, after hitting "Load Earlier Messages" so many times, my Message App crashes...
Are others experiencing this?
Is this a known bug?
Is there a fix for this?
Is there a way to avoid this or a workaround?
I can't see any corelation between conversations that crash and don't crash, it's almost random - as if some conversations were eventually trying to load a corrupted part of a conversation file and crash while others do not.
Please help! I need to look something up from a few older conversations dating back to June of 2012 and some of the conversations crash the app before I get there...
Thank you!No one else is experiencing this issue?!?
-
Help please! I have been using Mountain Lion for a few weeks but Finder, System Prefferences and the App Store won't load and/or keep crashing even after reinstalling the OS. How do to fix it?
Model Identifier: MacBookPro8,1
Processor Name: Intel Core i7
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.68f99You need to check to make sure you are actually connected to the network. Tap Settings > WiFi >and then tap the blue ">" next to the network name with checkmark. You should see a complete set of IP address but if the router didn't issue you an IP address properly, you will see your touch IP address start with 169.x. If this is the case, you are connected to the internal network but not to the web.
First thing to do (while you are on that screen) is tap "Forget Network". Then turn WiFi off. Turn it back on and, if needed, tap Other and re-enter your network information. If you continue to have problems, check with your IT department on Monday.
In the meantime, your laptop and iTunes can be used to purchase apps and music. Syncing them with your touch is a great way to get them installed while you are waiting for the answer on your WiFi problem.
Maybe you are looking for
-
Creative MediaSource 5 is now officially available for download (22 Dec 20
I just saw that the latest (dated 22 Dec 2006) Creative MediaSource 5 and its various plugins are now officially available for download at your respecti've product download sites. The main Creative MediaSource 5 Player/Organizer: Creative MediaSource
-
could anyone please tell the user exit for inbound idoc : ACC_POSTING_GL01
-
All my downloads have been erased or eliminated. How?
Went online to retrieve a download and the entire download list was gone. I did not clear the list where did it go and can I retrieve it?
-
I have a 2008 Macbook that keeps restarting
Late 2008 Macbook running 10.8.5 keeps restarting any ideas. It took a trip to the Apple store to fix the problem and they put in a new hard drive but the problem still presists. Update from OS 10.7.5 to 10.8.5 and that didn't fix the problem it just
-
Blog server not displaying OD user blogs after restart after 10.5.7 update
I've just applied the 10.5.7 update and after reboot the blog/wiki service shows blogs for local user accounts, but not for accounts from the Open Directory (not allowed message). However all accounts are accessible if I stop and start the wiki manua