Crash using sound

I have two flash demos that run fine in FireFox/Windows and
Safari/Mac, but they crash in IE6/Windows. Both use the new sound
synthesis features in Flash10, and neither one crashes if the
"mute" option is selected. I'm new to Flash -- how can I find out
what is killing them in InternetExplorer? The apps are at
http://www.signalsandnoises.com/interaction.htm

Charles Parcell wrote:
> Follow the link in my sig to report.
Hi Charles,
For those that use a newsreader (like me) for this forum,
your sig is
non existant. It does not show up.
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au

Similar Messages

  • Flash player 11.3 to 11.7.700.169 crash my sound card Creative audigy LS 5.1

    flash player 11.3 to 11.7.700.169 crash my sound card Creative audigy LS 5.1, I Updated the sound card drivers, I run Windows XP pro, dirextx 9C 3GO ram, since winxp don't detected more then 3 GO over 4ram, I have a Nvidia video card but the video is not the issue here the audio is, ever since i updated flash player to 11.3 my sound keep crashing and no updated so far fix anything, I even tried to lower to 16 bit 48 mhz as suggested and that din't fix anything, I keep crash, also the only way to foix it I must manualy empty the temporary internet files and the temp files otherwise not even a reboot work, after i empty those files I need to reboot and the sound get back, I even tried to use the flash uninstall program before installing any updated, nothing work, i still get my sound card to crash...anyone know how to fix this issue? .I hope this will be fix soon, thank you.

    As I say on my previous e-mail the problem started when I install the 10.3, and I did updated it every time there was an update t'ill now 11.7.700.169.
    The problem started to happend only after I download flash player 11.3 , and still remain even after all the update to 11.7.700.169.
    I can watch video the sound is good on firefox 20, that it not the problem here, the problem is after I have use flash player on blog or youtube , after I close the browser the sound card crash on all my device crash, I can't play mp3, or avi, the only sound I still can hear are the waves sound of windows.
    I updated my sound card drivers, I even tried uninstall flash player using the program they sugess to download to uninstall flash player device.
    I even try running the computer few days to see if my sound card was going to crash, I wasn't able to look any youtube video then, it was telling me I had to install the latess flash player device plugin to watch them,  but everything was running fine with out any problem , my sound card never crash then, on the mean time flash player did an updated so I download it, and right after it was install the same sound card problem start to happend all over again.
    If I open my browser to watch a video on youtube or I go to a blog with webcam, right after I close the browser "wich is firefox 20 since I also updated firefox everytime to make sure it's not the problem"  The sound card crash, and the only way to make it work again is to before I reboot, I need to empty the temporary internet files manualy and the temp files, other wise even if I reboot the sound card won't work, if i don't empty those files, the problem remain.
    I don't really understand how this happend and why, but I know that it's after I install the flash player  that all my sound card problem started to happend.
    Now I would gladly go with out flash player if I could still blog or look youtube, this way the problem was solved for me, but I can, and it's very annoying to go to all this process everytime to get back my sound.
    Thank you.

  • My laptop hard drive crashed, used to have lion now it is back to snow leopard. how do i get it back to lion again?

    my laptop hard drive crashed, used to have lion now it is back to snow leopard. i lost all of my info, music, pictures, etc. how do i get it back to lion again? this is very frustrating because i paid $30 to download it and now i am unable to have it again.

    If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
    If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.

  • Using sounds in flash catalyst?

    Is it possible to use sound files?
    Example:
    When you click on a button, is it possible to play a sound?
    Thanks!
    OnlyNK

    http://forums.adobe.com/thread/445228 :
    Importing sound files and importing them isn't supported in the current build, but it is on our list features for future releases.
    - Ty
    I've asked it to soon!
    The same question has already been answered.
    But I couldn't find it first...
    Long live Google!
    Cheers!
    OnlyNk

  • I am using sound and vibration assistant 7.0. I want to know if it is possible to convert the mag and phase plot to real and imaginary plots ??

    I am using sound and vibration assistant 7.0 . I am using the impact test example given . I want to know if it is possible to convert the magnitude phase plot to real and imaginary plot in the sound and vibration assistant 7.0 ???

    If you have LabVIEW, you can create a user step to perform the conversion in version 7.0. Sound and Vibration 2009 has a checkbox in the Frequency Response configuration page to export the real and imaginary components. Short of upgrading SVT, you can also install the evaluation version of NI LabVIEW SignalExpress 2009, and this will also upgrade the Frequency Response Step which is shared between the two products (but then you don't get all the other features that were also added in SV 2009).
    Here are some links that may be useful to help decide whether you want to upgrade:
    http://www.ni.com/soundandvibration/
    http://www.ni.com/labview/signalexpress/
    Doug
    NI Sound and Vibration

  • Using sound VIs in labview 7.0 professional development suite

    hello all
           i hav a built a VI that aquires a thermocouple signal through my daq card....i intend to use sound VIs whenever my temp.exceeds set point..in short sound should b generated whenever temp.exceeds certain limit...... i hav used a "Beep" VI in my code....but no beep occured even if my temp.crossed set point.....is there any other platform required for using sound VIs??....i work on labview 7.0 professional development suite.
    best regards
    Solved!
    Go to Solution.

    hello
           after i posted this msg i heard a beep sound on my  pc speakers by placing only beep vi on block dig...and also with my code running properly.( that when my set point exceeded beep started ringing)......but after that i tried experimenting on many sound VIs.....n now when i place beep vi seperately on a block diagram it is not giving audio signal....same is happening with my code also....i cant here sound.....after successfully hearing  beep sound on my pc speakers now wat suddenly happened with it??......would it b due to opening and closing many sound vis at a time??....like it happens in case of DAQ devices..that wen v use traditional daq devices n try using DAQmx devices after that they don't run unless v reset our traditional daq drivers.....so is it possible in case of sound vis also?...atleast a separate beep vi should run giving sound on speakers if i assume my code is wrong...
    best regards

  • Crash using Bridge

    Again problem with camera raw in Bridge.
    Many times, clicking on done after some modifications on RAW files, the system crash.

    Ok Barbara,
    I've downloaded Combo updater.
    I didn’t found files like com.adobe.bridge.plist in librery/prferences, maybe I made a wrong search?
    In finder/application I found what s shoved in the enclosure.
    The problem unfortunately is not fixed.
    BR
    Max
    Il giorno 24/apr/2012, alle ore 17:06, Barbara B. ha scritto:
    Re: Crash using Bridge
    created by Barbara B. in Photoshop Elements - View the full discussion
    Okay, then it's not a clone. TM only restores documents/settings/etc, not your system.
    Here's what I would do. Go here and download the combo updater for 10.7.3:
    http://support.apple.com/kb/DL1484
    Then run that. Repair permissions.
    Now go to  your username>library>preferences and delete everything that is anything like com.adobe.bridge.plist (there may be more than one and some may have numbers). Also any lockfiles with the same name. This library file is hidden in 10.7. Option click the Go menu in the Finder and it will appear below the little house for your user account. While you're in there, go to the Saved Application States folder and delete anything in there relating to PSE or bridge.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4357273#4357273
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4357273#4357273. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Feedback howling – can I get rid of this using Sound Studio 2.2.4?

    I am making a short extract from the recording of a talk, using Sound Studio 2.2.4. I have managed to cut out the sounds of coughing and most of the other unwanted noises by working my way through the filters and trying out the ones that look promising, but I haven't been able to do anything about the feedback howling that can be heard in one particular section. Is it possible to get rid of this noise and retain the speech?
    Thank you.
    Mac mini   Mac OS X (10.3.9)  

    @dzfam02, I've had this same exact problem.  In my situation I wasn't using "Jam", I was using a different wireless mic, but everything you describe was the same for me. 
    Because I have an extensive history in the "old-school" systems (i.e. analog), as soon as I heard the hum I knew what it was.  It's almost always a cable of some kind allowing RF noise, or some other form of noise, into your system.  Usually, all you have to do is move around your cables, power bricks, lamp cords, or ANY other cable that has current running through it.  For me, it was a simple move of one cable just 6 inches to solve the problem. I have seen it take some rather drastic rearrangements to eliminate the hum.  Consider moving you computer around as well.  I have always found it strange that the introduction of a new piece of equipment can cause a situation where a seemingly non-related cable and/or equipment must be moved to eliminate the hum that was a result of the new equipment being brought in. 
    Things to live by:
    ALWAYS use high quality shielded cables.  NEVER lay too many cables too close together.  NEVER use gender changers to connect 2 shorter cables to make a longer one as the connection ALWAYS leaks signal AND allows offending signals (hum?) to be introduced.  Instead, use 1 continuous cable. 
    Hope this helps...

  • Can I use Sound Soap with Garage Band?

    Can I use sound soap with GarageBand?

    No you cannot. Sound Soap only comes as an RTAS pluggin and GarageBand can only host AU (Audio Unit) pluggins. Here are some alternatives from Izotope, an entry level option https://www.izotope.com/products/audio/msc/ and their more 'Pro' version https://www.izotope.com/products/audio/rx/ Hope that helps.

  • Used Sound Check on my iTunes library-did I make a mistake?

    Hi all,
    I have some rudimentary questions about iTunes, and the "Sound Check" feature in particular.
    I've just completed converting my 18K FLAC song library into ALAC, mainly to use iTunes Genius mixes and to be more compatible with my iPhone and Touch. My library was ripped a few years ago when I bought my Sonos system to get whole-house music. At that time, I ripped my CD's into the FLAC to maintain the highest sound quality possible. No equalization was applied during the ripping.
    Once I loaded my new ALAC songs into iTunes (converted using XLD), I began experimenting with Sound Check to normalize the volume among my songs, especially where the Genius mixes are concerned (I have quite a bit of classical music). While iTunes started the long conversion of my music to use Sound Check, I started reading about volume normalization and the effects of the quality of the sound. I read that Sound Check was really not the right way to go if I wanted to just normalize the volume; that it also affected the sound quality.
    After reading this, I stopped the iTunes Sound Check conversion. Luckily, iTunes had only converted around 400 songs into Sound Check. But now I'm worried about those songs that iTunes did convert, and if I have compromised the sound quality of my ALAC tracks.
    How does iTunes determine the Sound Check settings? I initially thought that Sound Check only affected the playback volume of the songs, but upon reading the discussions, it seems to change other things?
    Does Sound Check store its parameters in a tag(s)? Or does it physically change the songs themselves? I hope that it does not change the songs, or I'll have to reconvert those 400 songs again.
    Is there another program that I can use to just normalize the volume of the songs across my library? In the discussions I read, iVolume was mentioned, but I don't (obviously) have any experience with this program nor any others that affect song playback. Any suggestions as to other apps to investigate would be appreciated.
    Thanks for your time.
    Mike

    Thanks for the reply Jim and for the link to the KB article. I looked through all the tags by showing each one, but I didn't see any that looked like they were populated by Sound Check. I'll read the link you provided to find out more.
    Jim VanLeeuwen wrote:
    I have used iVolume for some time and have been very satisfied. Of course, at age 64 I no longer have audiophile hearing. You can get information here: http://www.mani.de/ivolume/index.html
    I have 52 year-old ears, both of which have tinnitus, so I know about my lack of audiophile hearing I just want to make sure that I don't mess up the audio quality of my songs for the next generation
    Thanks again. I'll look at iVolume more closely.
    Mike

  • How can I measure Total Harmonic Distortion using sound card?

    Dear LabView users,
    I am a new LabView user. I want to measure Total Harmonic Distortion and other power quality related parameters using sound card as a part of my mini project. It will be helpful for me if anyone can send related NI files, manuals, block diagram etc. 
    Thanking you in advance.
    Best Regards,

    Which Labview version do you have. Some functions that you need are installed with the Full Development System. Owning Palette: Waveform Measurements VIs
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Using sound in a presentation: Is this the only way?

    I need to use sound files with individual slides in Keynote for the iPad. But I don't see sound files in my "media" list, the way I do with the full Keynote program. And if I import a presentation with imbedded sound, the sound will play in preview/edit mode on the iPad, but not in "play."
    So I developed a goofy workaround (below).
    Is this the only way?
    1. Record sound as part of a Quicktime movie.
    2. Process & save for iPad.
    3. Import the video through iTunes.
    4. Place on a slide & set to play automatically.
    5. Shrink the movie window to the size of a pixel and hide it somewhere on the slide.
    Surely there must be a better way to incorporate audio in Keynote for the iPad??????????

    I searched.
    The only semi-answer I found was essentially what I stumbled across on my own:
    To get sound, you have to import a movie and hide it. Even a video-free Quicktime movie file won't work; it has to be a "real" movie with video content.
    This needs fixing in 1.2.

  • My flashplayer constantly crashes using Firefox!!  What's the deal?

    My flashplayer constantly crashes using Firefox!!  What's the deal?

    Follow the instructions here: http://forums.adobe.com/thread/1343084
    That will do a COMPLETE "clean install".
    After that, if it still stops, it's in your connection.

  • Using Sound Check...?

    Hi,
    I just wanted to know what the sound quality/what the difference is, if i tick the "Use Sound Check" in the Ipod options, when the Shuffle is connected to the PC.

    Sound Check does not alter the file. It analyzes the sound level, and saves that info that to adjust playback volume.

  • Using sound studio

    Hi,
    can anyone tell me how to burn a recording i made on sound studio onto a cd...is this even possible? I can't figure it out. Please help. Thanks.
    ibook G3   Mac OS X (10.2.x)  

    You cannot burn a cd using sound studio. You can import them to your itunes library. Then sent up a playlist and burn that using itunes. I have done it quite a lot.

Maybe you are looking for