Crash while using iPod App

Sometimes, while I'm listening to a podcast and press the home button to wake up the screen, my iPhone 4 momentarily shows the Apple logo and restarts. It's much quicker than a regular reboot though. Does anyone know why this happens? Is it just a regular crash? I've only noticed this happening since the 4.3 update.
Everything else with my phone seems to be working fine.

Is anyone else having this problem?

Similar Messages

  • HT1665 There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

    There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

    I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
    As for the crashes on your iPad try these basic troubleshooting steps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • IPad air crashes while using Song Pop app three times so far.

    Is there a fix for iPad Air crashing while using apps?

    Hi there  DJ Axis,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    -Griff W. 

  • Ipod touch 4 gets hot while using some apps like angry birds?

    Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps.  I assume that it has something to do with battery drain, should I be concerned?

    When the iPod is used heavily like for games it is norma for the iPod to get warm.  Unless you hav short battery life I would not be concerned.

  • Dreamweaver CC crash while using

    hello,
    i am using 14 days trial , 12 days left.
    but in this period,  i just saw many crashes while using DW CC ,
    for example i just leave the application to be open. and then i use that for some minutes, but suddenly ! i see that application crashing and...
    it working for just some minutes and i don't know that when DW wants to be close and crashing..
    each time it crash at the different situations .. for example sometimes while i am writing javascript codes sometimes while writing html codes... it's not stable at all i have just fear of losing my project. so i have to save file quickly .
    i don't like this situation i like DW as a stable and trustable program but it's not, i don't want to losing my hard working each time after crashing
    i sent you the crash logs as you , please see if there is a solution for this please help me to fix it.
    here i send you some crash logs maybe it can help you for finding out the issue:
    Process:         Dreamweaver [11334]
    Path:            /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
    Identifier:      com.adobe.dreamweaver-13.0
    Version:         13.1.0.6443 (13.1.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [617]
    Responsible:     Dreamweaver [11334]
    User ID:         501
    Date/Time:       2013-12-04 16:40:52.489 +0100
    OS Version:      Mac OS X 10.9 (13A603)
    Report Version:  11
    Anonymous UUID:  4872890F-22C0-2702-F1AE-XXXXXXX
    Sleep/Wake UUID: 5DD25E98-9A4C-4509-87FA-XXXXX
    Crashed Thread:  0  CrBrowserMain  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
        __TEXT                 0000000000001000-0000000001c12000 [ 28.1M] r-x/rwx SM=COW  /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
    Thread 0 Crashed:: CrBrowserMain  Dispatch queue: com.apple.main-thread
    or this one:
    Process:         Dreamweaver [7824]
    Path:            /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
    Identifier:      com.adobe.dreamweaver-13.0
    Version:         13.1.0.6443 (13.1.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [617]
    Responsible:     Dreamweaver [7824]
    User ID:         501
    Date/Time:       2013-12-03 18:03:12.328 +0100
    OS Version:      Mac OS X 10.9 (13A603)
    Report Version:  11
    Anonymous UUID:  4872890F-22C0-2702-F1AE-XXXXXX
    Sleep/Wake UUID: 27A10C10-6722-499A-ABC4-BXXXXX
    Crashed Thread:  0  CrBrowserMain  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
        __TEXT                 0000000000001000-0000000001c12000 [ 28.1M] r-x/rwx SM=COW  /Applications/Adobe Dreamweaver CC/Adobe Dreamweaver CC.app/Contents/MacOS/Dreamweaver
    Thread 0 Crashed:: CrBrowserMain  Dispatch queue: com.apple.main-thread

    Hi Hossein ,
    Thanks for sending us the crash logs , we are investigating into the issue and  one of us will be getting in touch with you .
    Would be great if you can help us with your workflows

  • Indesign CC crashes while using spellcheck - what to do?

    indesign CC crashes while using spellcheck - what to do?

    InDesign 2014.2 Release  |  10.2.0.69 Build
    I recently upgraded to the latest version of InDesign via the Cloud app and two chronic issues have reappeared:
    Text randomly disappears during editing on the page.
    Launching the spellcheck function causes InDesign to crash.
    Come on, Adobe — I (and many other users) dealt with these problems for months after we transitioned from CS6 to CC 2014. Eventually, you fixed the problems, but it took forever! Now they’re back with your latest “upgrade.”
    This is ridiculous!

  • Efi detects wrong resolution - osx crashes while loading loginwindow.app

    Hello,
    I have a strange problem: Sometimes EFI loads OS-X with wrong display resolution which ends into a crash of loginwindow.app.
    Let me explain it in more details: First I had a system with rEFIt. Everything worked like a charm ... until on some day (I think it was EFI Update 1.5.1, but I don't know it exacly) my mbp rev3 sometimes decided to show EFI menue much larger as you would expect it on a 640x480 display. This happens in about 3 of 4 boots. If this happened, OS-X crashed while loading loginwindo.app and Windows crashed before showing the windows loading screen.
    Then after talking with some guys in irc unofficial support I reinstalled everything because they said all my 3rd parity software could be the reason for this error. Now I have a fresh installed leopard and the error still occures - and the error also occures when I boot into leopard disc.
    *To describe the problem in a few words:*
    - EFI detects display resolution wrong in about 3/4 boots
    - loginwindow.app crashes if EFI detected resolution wrong
    - while crashing some strange artefacts are shown on grey apple screen / on verbose mode console, sometimes screen gets orange for about 0.1 sec before artefacts are shown
    *I tried following things to fix the problem:*
    - reset vram: no result
    - verbose mode: does not show anythingnew compared to right boot, after message "loginwindow.app is loading" "login windoe application started" i get some artefacts and the orange screen
    - single user mode: did't find something in logs, but I also didn't find an efi log
    - hardware diagnostics: says everything is right
    - Firmware Restoration CD: does not work because my mac seems to think that everything is right.
    - plug off all external usb devices: no effect
    Now I really don't know what to do, I don't even have an idea where to find this error and what to try next. The mbp is my only computer, so I would find it excellent to solve the problem for myself.
    Thanks for any help what to do
    Message was edited by: TheInfinity

    I'm not sure why you're password is wrong when you type it directly in your station, but I have found something related to remote logging.
    I had always gotten the password wrong when I tried to connect through VNC from my Linux to my Mac. The problem is that for some reason, my keyboard layout is applied twice. I'm using the colemak layout, so if I want to type 'K', I need to click on the key that is marked 'N' in QUWERTY keyboard.
    BUT, through VNC to my mac, if I want to type 'K', I need to type the key that is mapped to 'N' on colemak layout, which is the key marked 'J' in QUWERTY.
    So to type hello, through normal colemak, I would click on hkuu;, but through VNC to the mac, I need to click on hniip.
    Here's the map that can be used to generate the above:
    Qwerty -> Colemak
    k -> e
    n -> k
    j -> n
    e -> f
    h -> h
    u -> l
    ; -> o
    p -> ;
    i -> u
    My solution was to find out how my password should be typed with double-applied colemak, then after log in, change the keyboard layout to QWERTY, and then it is applied only once and I can type in normally. I'm not sure what's the cause of the bug, but at least you have something to try..

  • TS1702 While using the App Dragonvale when playing and giving a command the app turns me back to the home page.  Any suggestions ?

    While using the App Dragonvale when playing and giving a command the app returns me to the IPad home page. Has this happened to anyone?
    How do I fix ?
    Aileen

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod
    Also, have you visited the developer's support site?

  • Logic Pro X Crashing while using Komplete Ultimate 9 Battery 4 Plugin

    Hi Everyone!
    I am encountering consistent crashes with Logic Pro X and Native Instruments Komplete Ultimate 9 Battery 4 Plugin. If I create about 4 tracks with a bunch of midi notes I.E. numerous kicks, numerous snares, numerous claps and numerous hi hats Logic Pro X will consistently quit when I go to Save As and then click save. I get the circle and then bam! Logic Pro states that “Logic Pro Quit Unexpectedly while using the Battery 4 Plugin.” I have inserted the crash image too. This only happens with the Battery 4 Plugin and does not occur with any of the other plugins in Komplete 9 Ultimate or any of Logic's Plugins. I have tried to Save As and Save Copy As with the outcome being the same crash. The fact that the crash occurs when I am going to Save As tells me that something is most likely occurring with Logic Pro X and not Battery...right? I really like Battery 4--to the point that I don't want to go back unless I must--and the drum sounds in Battery 4 are perfect for my electronic music that I produce. Any help is appreciated in advance. I have repaired my disk, updated Komplete with the latest updates and contacted Komplete which still has not responded (one week later) Here are my computer specs:
    Imac 27” Mid 2011
    1 TB internal HD with 800 GB free space
    16gb ram
    3.4 GHz
    I7 Processor
    Presonus Firestudio Interface
    OS X 10.8.5
    Logic Pro 10.0.6
    Lacie 7200 RPM 500GB USB external HD for my Komplete 9 Ultimate Sample Library with 200 GB free space
    Minipro SSD 250 GB Hard Drive for session

    Thanks for posting DeeJayKeyz, it helps to know you are experiencing the same issue...although I wish none of us were. I have done the following to troubleshoot the Battery 4 crash issue in hopes of finding a solutions yet it still comes up:
    Repaired Disk Permissions
    Reinstalled Battery 4 app and library
    Initialized Preferences in Logic X except for key commands
    Trashed the com.apple.audiounitlugins
    Trashed Logic's preferences via the Library
    Set up a new administrator account in preferences>user and tried again…
    With all the above troubleshooting, the issue eventually comes back. The most success I had was when creating a new user. BUT, I still experienced crashing on Logic Pro 9 every time and the crash would occur with the first save with Logic Pro X when using the Battery 4 Plugin on the new user account. Again, for the sake of repetition, Logic Pro 9 consistently crashed when "save[ing] As" and Logic Pro X would crash the first time I went to Save As, but would “save as” with no issues after the first crash when creating a new admistrator user. In both cases I had 16 tracks of Battery going, but it doesn't take more than 4 to re-create the crash. On a side note, if I change the tracks to Massive or Absyth I don't get crashes...just battery 4 for me so far. I have not tried it with Kontact as I have been spending too much time figuring out the Battery Logic issue. Bummed to know that I may experience this issue dow the road with Kontact :/ sure with Native Instruments and Logic would get their heads together to figure this out. I contacted Apple and dealt with Garry in support. He was helpful and came up with creating a new user. He did tell me to call back if I had any other crashes and this would be taken to a higher administration lever. But when I called back low and behold, I dealt with someone else who just blamed battery 4. I have to say though…using the "save as" feature and crashing while using a plugin appears to be a Logic problem…although I don't doubt there is a communication issue btw the two programs.

  • Photoshop CC crashing while using gradients.

    While using PS CC on a Macbook Pro with Mavericks, 16gb of RAM and 80gb of space on an SSD I get crashes while using the gradient tool. I'll make a curve, fill the mask and select the gradient tool to use in the mask. If I switch from black to white in the palette using "x" I almost always get a crash.
    I've run all the updates I can, needless to say this is extremely frustrating.

    Hi,
    Sorry for the troubles. Have you submitted any crash data to the Adobe Crash Reporter system? I wanted to check there to see if we are already tracking and aware of the issue already.
    Also, are you using Ps CC (14.2.1) or Ps CC 2014 (15.0)?
    regards,
    steve

  • Photoshop CS4 crashing while using program on Vista

    PS is crashing while using. No clear repeat of when and causes my computer to be unable to "end process". I have to do a hard restart.
    Using trial version of photoshop and this is not helping when deciding to purchase.
    Using Vista Ultimate. ATI Radion HD 2400 (I've updated the driver)
    I've disabled the Open GL checkbox.
    I've been using PS CS 1 before this and I may just keep using it since it's stable. Love to upgrade but not with this headache.

    Using Vista Ultimate. Not sure about security since this is a work computer and I don't know the PC (I'm a Mac Person using a PC by force).
    Where would I find the "event log"?

  • Jvm 1.5.0_06 crashing while used in tomcat as service

    ANyone ever seen this one.
    JVM crashes while used by tomcat as service. The crash occurs randomly. In this case while writing an index for lucene. Lucene is used within our jackrabbit application. This crash caused the index en thus the data in jackrabbit to become corrupt. All content of repository was therefor useless.
    Tomcat 5.5.17 is installed on a windows 2003 server.
    Does anyone know the cause of this crash. See hs_errpidx.og file below
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6da727b6, pid=1132, tid=1160
    # Java VM: Java HotSpot(TM) Server VM (1.5.0_06-b05 mixed mode)
    # Problematic frame:
    # V [jvm.dll+0x1f27b6]
    --------------- T H R E A D ---------------
    Current thread (0x26b175d8): JavaThread "CompilerThread0" daemon [_thread_in_native, id=1160]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
    Registers:
    EAX=0x272bf5c4, EBX=0x26dcf1b0, ECX=0x00000000, EDX=0x6db74d28
    ESP=0x26dcf15c, EBP=0x272c1424, ESI=0x272c0d1c, EDI=0x272c0cd8
    EIP=0x6da727b6, EFLAGS=0x00010246
    Top of Stack: (sp=0x26dcf15c)
    0x26dcf15c: 272c0cd8 272c0d1c 6da728bd 272bf5a4
    0x26dcf16c: 272c1424 26dcf1b0 272c1488 00000000
    0x26dcf17c: 272c1424 26dcf280 6da72adf 272c0d1c
    0x26dcf18c: 272c1424 26dcf1b0 26dcf280 272c1424
    0x26dcf19c: 272be300 272c1424 26dcf280 00000000
    0x26dcf1ac: 278b0794 00000000 00000002 276942e0
    0x26dcf1bc: 00000000 6dac5e2f 26dcf280 00000001
    0x26dcf1cc: 0000002e 26dcf3c0 272c1424 6dac5cc7
    Instructions: (pc=0x6da727b6)
    0x6da727a6: 83 78 0c 03 0f 85 87 00 00 00 8b 40 04 8b 48 08
    0x6da727b6: 8b 11 ff 52 28 85 c0 74 78 8b 40 04 8b 08 8b 11
    Stack: [0x26d90000,0x26dd0000), sp=0x26dcf15c, free space=252k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    V [jvm.dll+0x1f27b6]
    Current CompileTask:
    opto:2085 org.apache.lucene.index.IndexReader$1.doBody()Ljava/lang/Object; (99 bytes)
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x27f95fb8 JavaThread "IndexMerger" daemon [_thread_blocked, id=2588]
    0x2737c618 JavaThread "ObservationManager" daemon [_thread_blocked, id=2584]
    0x279fc6c8 JavaThread "IndexMerger" daemon [_thread_blocked, id=192]
    0x27c40a70 JavaThread "ObservationManager" daemon [_thread_blocked, id=1796]
    0x27c40bf8 JavaThread "File Reaper" daemon [_thread_blocked, id=548]
    0x29488c20 JavaThread "IndexMerger" daemon [_thread_blocked, id=2288]
    0x28b8a008 JavaThread "ObservationManager" daemon [_thread_blocked, id=2268]
    0x27ee5e28 JavaThread "TP-Monitor" daemon [_thread_blocked, id=1392]
    0x29427008 JavaThread "TP-Processor4" daemon [_thread_in_native, id=1208]
    0x27641e50 JavaThread "TP-Processor3" daemon [_thread_blocked, id=1320]
    0x27749e08 JavaThread "TP-Processor2" daemon [_thread_blocked, id=2020]
    0x277de008 JavaThread "TP-Processor1" daemon [_thread_blocked, id=1916]
    0x270005e0 JavaThread "http-8080-Monitor" [_thread_blocked, id=1808]
    0x26bff010 JavaThread "http-8080-Processor25" daemon [_thread_in_native, id=1100]
    0x276345a0 JavaThread "http-8080-Processor24" daemon [_thread_blocked, id=1840]
    0x28e82820 JavaThread "http-8080-Processor23" daemon [_thread_blocked, id=1136]
    0x26bb5848 JavaThread "http-8080-Processor22" daemon [_thread_blocked, id=1452]
    0x26f000c0 JavaThread "http-8080-Processor21" daemon [_thread_blocked, id=1460]
    0x26bb4820 JavaThread "http-8080-Processor20" daemon [_thread_blocked, id=1456]
    0x29617648 JavaThread "http-8080-Processor19" daemon [_thread_blocked, id=296]
    0x28af65d0 JavaThread "http-8080-Processor18" daemon [_thread_blocked, id=300]
    0x291b4790 JavaThread "http-8080-Processor17" daemon [_thread_blocked, id=1660]
    0x28b1a7f0 JavaThread "http-8080-Processor16" daemon [_thread_blocked, id=1340]
    0x28b1a5c8 JavaThread "http-8080-Processor15" daemon [_thread_blocked, id=1076]
    0x276ca838 JavaThread "http-8080-Processor14" daemon [_thread_blocked, id=1332]
    0x291bd6b8 JavaThread "http-8080-Processor13" daemon [_thread_blocked, id=1008]
    0x29657630 JavaThread "http-8080-Processor12" daemon [_thread_blocked, id=1028]
    0x29657408 JavaThread "http-8080-Processor11" daemon [_thread_blocked, id=1764]
    0x290197a8 JavaThread "http-8080-Processor10" daemon [_thread_blocked, id=580]
    0x279d2d50 JavaThread "http-8080-Processor9" daemon [_thread_blocked, id=304]
    0x27557600 JavaThread "http-8080-Processor8" daemon [_thread_blocked, id=204]
    0x27150d60 JavaThread "http-8080-Processor7" daemon [_thread_blocked, id=212]
    0x27150a00 JavaThread "http-8080-Processor6" daemon [_thread_blocked, id=232]
    0x27150740 JavaThread "http-8080-Processor5" daemon [_thread_blocked, id=1980]
    0x29869be8 JavaThread "http-8080-Processor4" daemon [_thread_blocked, id=2004]
    0x29869a60 JavaThread "http-8080-Processor3" daemon [_thread_blocked, id=2044]
    0x298698d8 JavaThread "http-8080-Processor2" daemon [_thread_blocked, id=1992]
    0x290a5ab0 JavaThread "http-8080-Processor1" daemon [_thread_blocked, id=1988]
    0x2926b408 JavaThread "ContainerBackgroundProcessor[StandardEngine[Catalina]]" daemon [_thread_blocked, id=1924]
    0x290741e8 JavaThread "RMI TCP Accept-2099" daemon [_thread_in_native, id=1020]
    0x29063df0 JavaThread "GC Daemon" daemon [_thread_blocked, id=1752]
    0x29488228 JavaThread "RMI Reaper" [_thread_blocked, id=1220]
    0x2912dc50 JavaThread "Timer-2" daemon [_thread_blocked, id=692]
    0x274ce768 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=928]
    0x2796ce48 JavaThread "IndexMerger" daemon [_thread_blocked, id=520]
    0x27181e58 JavaThread "Timer-1" daemon [_thread_blocked, id=504]
    0x27546e48 JavaThread "Timer-0" daemon [_thread_blocked, id=484]
    0x274cc618 JavaThread "ObservationManager" daemon [_thread_blocked, id=444]
    0x27469a38 JavaThread "derby.rawStoreDaemon" daemon [_thread_blocked, id=188]
    0x2720ab98 JavaThread "derby.antiGC" daemon [_thread_blocked, id=1432]
    0x26b452d0 JavaThread "Thread-1" [_thread_in_native, id=2016]
    0x26b19750 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1928]
    0x26b183a8 JavaThread "CompilerThread1" daemon [_thread_blocked, id=1828]
    =>0x26b175d8 JavaThread "CompilerThread0" daemon [_thread_in_native, id=1160]
    0x26b166a0 JavaThread "AdapterThread" daemon [_thread_blocked, id=1296]
    0x0082f730 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1164]
    0x0082ce90 JavaThread "Finalizer" daemon [_thread_blocked, id=1692]
    0x0082c1f0 JavaThread "Reference Handler" daemon [_thread_blocked, id=460]
    0x003c5a50 JavaThread "main" [_thread_in_native, id=1468]
    Other Threads:
    0x0082a050 VMThread [id=1276]
    0x26b1aa68 WatcherThread [id=2012]
    VM state:at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
    [0x003c5170/0x0000013c] Threads_lock - owner thread: 0x0082a050
    [0x003c52f0/0x00000178] Heap_lock - owner thread: 0x26bb5848
    Heap
    PSYoungGen total 47936K, used 32542K [0x22f50000, 0x26830000, 0x26830000)
    eden space 38016K, 65% used [0x22f50000,0x2477cbd8,0x25470000)
    from space 9920K, 78% used [0x25e70000,0x2660adc0,0x26820000)
    to space 10112K, 10% used [0x25470000,0x255840c0,0x25e50000)
    PSOldGen total 76800K, used 59040K [0x06830000, 0x0b330000, 0x22f50000)
    object space 76800K, 76% used [0x06830000,0x0a1d8068,0x0b330000)
    PSPermGen total 30080K, used 29859K [0x02830000, 0x04590000, 0x06830000)
    object space 30080K, 99% used [0x02830000,0x04558e70,0x04590000)
    Dynamic libraries:
    0x00400000 - 0x0041b000      C:\Programme\PLM\tomcat\bin\tomcat5.exe
    0x7c920000 - 0x7c9e6000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c915000      C:\WINDOWS\system32\kernel32.dll
    0x77e20000 - 0x77eb3000      C:\WINDOWS\system32\USER32.dll
    0x77bd0000 - 0x77c18000      C:\WINDOWS\system32\GDI32.dll
    0x77f30000 - 0x77fdc000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77c20000 - 0x77cbf000      C:\WINDOWS\system32\RPCRT4.dll
    0x77ec0000 - 0x77f12000      C:\WINDOWS\system32\SHLWAPI.dll
    0x77b70000 - 0x77bca000      C:\WINDOWS\system32\msvcrt.dll
    0x7c9f0000 - 0x7d1fd000      C:\WINDOWS\system32\SHELL32.dll
    0x77340000 - 0x77443000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.1830_x-ww_7AE38CCF\comctl32.dll
    0x6d880000 - 0x6dc31000      C:\Programme\PLM\jdk\jre\bin\server\jvm.dll
    0x76990000 - 0x769be000      C:\WINDOWS\system32\WINMM.dll
    0x6d2f0000 - 0x6d2f8000      C:\Programme\PLM\jdk\jre\bin\hpi.dll
    0x76a60000 - 0x76a6b000      C:\WINDOWS\system32\PSAPI.DLL
    0x76e40000 - 0x76e53000      C:\WINDOWS\system32\Secur32.dll
    0x6d6b0000 - 0x6d6bc000      C:\Programme\PLM\jdk\jre\bin\verify.dll
    0x6d370000 - 0x6d38d000      C:\Programme\PLM\jdk\jre\bin\java.dll
    0x6d6d0000 - 0x6d6df000      C:\Programme\PLM\jdk\jre\bin\zip.dll
    0x6d530000 - 0x6d543000      C:\Programme\PLM\jdk\jre\bin\net.dll
    0x71a10000 - 0x71a27000      C:\WINDOWS\system32\WS2_32.dll
    0x71a00000 - 0x71a08000      C:\WINDOWS\system32\WS2HELP.dll
    0x71930000 - 0x71972000      C:\WINDOWS\system32\mswsock.dll
    0x27b20000 - 0x27b7a000      C:\WINDOWS\system32\hnetcfg.dll
    0x718f0000 - 0x718f8000      C:\WINDOWS\System32\wshtcpip.dll
    0x6d550000 - 0x6d559000      C:\Programme\PLM\jdk\jre\bin\nio.dll
    0x68000000 - 0x6802f000      C:\WINDOWS\system32\rsaenh.dll
    0x76dc0000 - 0x76dea000      C:\WINDOWS\system32\DNSAPI.dll
    0x76e60000 - 0x76e67000      C:\WINDOWS\System32\winrnr.dll
    0x76e00000 - 0x76e2f000      C:\WINDOWS\system32\WLDAP32.dll
    0x76e70000 - 0x76e75000      C:\WINDOWS\system32\rasadhlp.dll
    VM Arguments:
    jvm_args: -Dcatalina.base=C:\Programme\PLM\tomcat -Dcatalina.home=C:\Programme\PLM\tomcat -Djava.endorsed.dirs=C:\Programme\PLM\tomcat\common\endorsed -Xmx512M vfprintf
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    PATH=C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\oracle\ora92\bin;C:\Programme\Oracle\jre\1.3.1\bin;C:\Programme\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 3, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows Server 2003 family Build 3790 Service Pack 1
    CPU:total 2 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
    Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(4194303k free)
    vm_info: Java HotSpot(TM) Server VM (1.5.0_06-b05) for windows-x86, built on Nov 10 2005 10:53:00 by "java_re" with MS VC++ 6.0

    This is a known incompatiblitly. See #5 in http://java.sun.com/j2se/1.5.0/compatibility.html

  • How can I continue listening to a YouTube video while using another app?

    How can I continue listening to a YouTube video while using another app?

    How can I continue listening to a YouTube video while using another app?

  • Powerbook crashes while using Safari

    Hi, My Powerbook G4 keeps crashing while using Safari. Not everytime I use it but a few times a day...enough to be irrating. I'm including a problem report. I've done some housekeeping...up to reinstalling the system software. Thanks much for any help.
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000409C4008 PC=0x0000000000034A70
    Latest crash info for cpu 0:
    Exception state (sv=0x3C86A780)
    PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
    Proceeding back via exception chain:
    Exception state (sv=0x3C86A780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2D022C80)
    PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
    Kernel version:
    Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x003DD520 0x002DA030 0x006C59C8 0x0050FC08 0x0050AE28 0x0050A8D8 0x0050A590 0x0050A054
    0x0050AA78 0x0050A444 0x005102CC 0x002CFF1C 0x002D0090 0x002CEFE4 0x000A9894
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleKauaiATA(1.2.1f4)@0x6c3000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x479000
    dependency: com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
    com.apple.iokit.IOATAFamily(1.6.0f2)@0x504000
    Proceeding back via exception chain:
    Exception state (sv=0x3C86A780)
    PC=0x00034A70; MSR=0x00001030; DAR=0x409C4008; DSISR=0x40000000; LR=0x00034A5C; R1=0x17593D70; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x000326E0 0x00032BD8 0x002CEFE4 0x000A9894
    Exception state (sv=0x2D022C80)
    PC=0x9522AC28; MSR=0x0000F030; DAR=0xE00BF000; DSISR=0x42000000; LR=0x9522AB1C; R1=0xBFFFE320; XCP=0x00000400 (Unknown code)
    Kernel version:
    Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPCModel: PowerBook5,3, BootROM 4.7.0f2, 1 processors, PowerPC G4 (1.1), 1.33 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
    Memory Module: SODIMM0/J20STANDARD, 512 MB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J23REVERSED, 512 MB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
    Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
    Bluetooth: Version 1.7.0f18, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITADVD-R UJ-816,
    Parallel ATA Device: Hitachi IC25N080ATMR04-0, 74.53 GB
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: USB2223, SMSC, Up to 480 Mb/sec, 500 mA
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: Hub, , Up to 480 Mb/sec, 500 mA
    USB Device: EPSON Scanner, EPSON, Up to 480 Mb/sec, 500 mA
    USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: USB2.0 Printer (Hi-speed), EPSON, Up to 480 Mb/sec, 500 mA
    USB Device: USB2.0 Storage Device, DMI, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
    Powerbook G4 17"   Mac OS X (10.4.4)  

    Hold down the Sleep (or lock) button while holding the Home button. Keep holding them down until you see the Apple logo on screen. Do it for however long it takes to see the logo (like up to ten seconds). Let go when you see the logo and it will reboot.
    If that doesn't do it then something has gone seriously wrong but I doubt a Safari crash could have been the cause of that kind of problem.

  • TS1702 While using an app it will close by it self and I am looking at the start desktop icons.

    My iPad closes while using an app an I am back at the icon desk top.

    What App?

Maybe you are looking for

  • What can I do to search properly a file in an external hard drive?

    I've installed Paragon app. to copy files in an external hard drive. That application is working well, however I have the following question: what can I do to search properly a file in an external hard drive? I'm referring to look up a file using Fin

  • Is there an FM by which i can update Auth Obj for Tables/Reports

    Hi All, I need to update Authorization Objects for a few tables as well as few reports. I do not want to update it manually, So is there any FM which would allow me to access the attributes and update the Authorization Object? Thanks in Advance, Arun

  • PS CS6 Auto Recover???

    Was asked to troubleshoot a Win 7 PS13 (CS6) crash today - first time to my knowledge PS has ever crashed! On restart, no Auto Recover option. All work lost. Did some checking. Found two folders: 1. On the boot disk, found Users\xxxx...\....\AutoReco

  • Brush Opacity Less Than 100%

    I am using Photoshop CC 2014.   On application of a Brush stroke, the color laid down is less, far less, than the 100% that is set for Opacity and Flow.  This problem does not exist with the installed Photoshop CC.  Probably, if I were to guess, the

  • How Shall I programatically set  VO's  for Advanced Table?

    I have Advanced Table which display data from 3 different table under certain conditions. These 3 tables having same columns but different data. Here I have defined 3 VOs for this 3 tables. Now I want to programatically configure this VO to Advanced