Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Similar Messages

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

After Effects 7 with ATI Radeon X1900 XT

Hi everyone,
I use Adobe After Effects 7 a lot and I'm not happy with my current machine (PowerPC G5 2x1.8GHZ, 2GB DDR SDRAM, ATI Radeon X800 XT), it is too slow to work smoothly when I have several layers and effects going on. Previewing the work on the timeline (OpenGL or Adaptative resolution) is painfully slow and takes on my nerves. I believe this is mainly due to my graphics card, and the fact is not 100% compatible with OpenGL on After effects.
I'm ready to upgrade with a Mac Pro 2.66 GHz Quad Xeon with ATI Radeon X1900 XT, but only if I'm going to enjoy a real improve with After Effects 7, as this is my main editing application right now.
Does anybody have experience with this configuration?
Thanks in advance for reading and replies!
PowerPC G5 2x1.8GHZ Mac OS X (10.4.7) 2GB DDR SDRAM, ATI Radeon X800 XT

I have this configuration, but sadly have had no time to play around with After Effects. AE's realtime playback capabilities are limited (especially when compared with something like Motion), so you're probably still going to be rendering to RAM a lot. I believe the OpenGL support is for things like anti-aliasing, blur, and blending modes -- so a faster video card may not automatically equal huge performance boost across the board. Four Xeon cores and a lot of RAM will help it a lot more (see exception below).
Also, AE 7 still has to run under Rosetta which results in a slower performance than if it was native. Also, be aware that there is a limit placed on all Rosetta processes that do not allow them to address more than 1.5GB of RAM combined. This will most likely limit your render speed and preview lengths. See this thread on Adobe's forums for more info:
http://www.creativecow.net/articles/jonesgraham/AE7_on_IntelMacPro/index.html
EDIT: The above link was to the performance comparisons, but not the original Adobe forum thread. Here it is:
http://www.adobeforums.com/cgi-bin/webx/.3bc2401b
However, if you read the thread, and follow the link in it, the author is seeing huge performance gains with AE7 on his MacPro 3GBs over his old dual G5 4.5GBs.
So most likely, you'll see a performance benefit from upgrading. And when an Intel native version of AE ships, things will really fly.

GPU enhancement issues with ATI Radeon X1900 XT

Upon startup, PS CS4 turns off GPU enhancements and displays the following error message:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software."
Problem is, according to all the research I've done, PS should be perfectly compatible with my Radeon X1900 XT card. To further complicate things, ATI does not appear to have driver updates for Radeon X1900 cards for Intel Macs on their website. Even a Google search doesn't seem to bring up any sites with the drivers. It's maddening!
Is anyone having similar problems, or can anyone offer advice? All Adobe and Apple support seem to recommend is updating my drivers, but of course that doesn't seem possible. Thanks!

I'm having a slightly different problem, but it fits in with what others are saying. I upgraded to CS4 the other day, and starting that night my system (a Mac Pro with the Radeon x1900 card) I have had issues with my display - that is, sometimes the display won't work after waking from sleep. The display is a 23" Cinema.
The rest of the system is fine (I have a laptop so I can peek in and control it remotely), and everything is just as I left it. The display itself responds to being turned on and off using the power button on the side (that is, the tiny light on the front turns on and off...). But the screen itself is pitch black, off entirely.
I took out the video card and it was, indeed, black on the intake with fine dust, so I cleaned that as best I could. That did not solve the problem, however.
Pull the plug to my desktop and plug it into my laptop, and it works just fine. Plug it back into the desktop...dead. The only thing that seems to fix it is shutting it down for a time. I don't know how long is required but it's more than a few minutes (so it's not a simple reset) and it's only been a few days and so far I've just gotten frustrated and left it over night - so it certainly could be related to cooling down.
Seems like Adobe is the culprit as the problem has *never* happened before, and has happened every day since the very day I installed CS4. I'd be reluctant to believe it...if I hadn't spent hours just upgrading to CS4 (I won't go into the legendary problems which plague Adobe's installers).
Given that when I bought this system a couple of years ago this was one of the few video cards I could choose, and it's the high-end of the bunch, there must be a lot of folks out there with this set-up plus CS4...
Sounds like the suggestion is to inhibit performance in CS4 so it doesn't fry my video card? I am running Temperature Monitor, but it doesn't show me that particular stat...

ATI Radeon X1900 XT and Color

Hi Guys,
sorry to post this here but couldn't think where else to ask this. Looking at the recommended specs for the Final Cut Studio 2 and especially Color. The recommended card is the ATI Radeon X1900 XT, what is it about this card that Apple recomend it so highly?
The reason I ask is because I've seen a great card that had 320GB VRAM but hope it works with color and motion 3
What do you guys think?
James
Dual 2.3Ghz PowerMac G5, 1.5 Ghz Powerbook G4 Mac OS X (10.4.6)

umm, i was advised while on a color demo pod at NAB with the writer of the product manual that the 1900 card is the sweet spot there. that's all the guidance i need. use what you want at your own risk.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

[Solved] Artifacts with ATI Radeon HD 6670 and open source driver

Hey folks,
I use the xf86-video-ati driver and have a lot of artifacts on my screen.
Here my Xorg and dmesg log:
Dmesg: http://pastebin.com/AF8AmJfP
Xorg: http://pastebin.com/8rnQS0sa
My kernel version: 3.8.8-2-ARCH
My /etc/X11/xorg.conf.d/20-radeon.conf:
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "EXAPixmaps" "off"
Option "AccelDFS" "off"
EndSection
I tried to use the linux-lts kernel and the mesa-git repository but nothing happend...
KMS is enabled, if I disable it Xorg only works with vesa but very slow and with a bad resolution.
All other framebuffers devices are disabled.
I hope someone can help me...
Last edited by Gorentill (2013-04-27 21:09:26)

Yes I have...no changes...
I could use the ati catalyst driver to solve this problem but I hate this slow driver.
EDIT:
I also have artifacts on my virtual console...
Last edited by Gorentill (2013-04-27 12:51:19)

Black screen on startx with ati radeon HD4330 Mobility and fglrx

Hi,
I managed to install Archlinux on my HP Butterfly laptop that's great !
However I am not able to get X running properly.
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series]
Firstly I tried to use the xf86-video-ati open source driver but it made my kernel crash during the module init.
So I am now trying fglrx, and at least my kernel is unharmed.
But all I get is a black screen after running startx.
Here is my X log :
[ 95.354]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 95.354] X Protocol Version 11, Revision 0
[ 95.354] Build Operating System: Linux 2.6.35-ARCH i686
[ 95.354] Current Operating System: Linux myhost 2.6.36-ARCH #1 SMP PREEMPT Mon Jan 24 18:34:55 UTC 2011 i686
[ 95.355] Kernel command line: root=/dev/sda7 ro nomodeset
[ 95.355] Build Date: 01 November 2010 10:35:30PM
[ 95.355]
[ 95.362] Current version of pixman: 0.20.2
[ 95.363] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 95.363] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 95.364] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 9 20:52:31 2011
[ 95.397] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 95.408] (==) ServerLayout "aticonfig Layout"
[ 95.408] (**) |-->Screen "base-screen" (0)
[ 95.408] (**) | |-->Monitor "native-monitor"
[ 95.408] (**) | |-->Device "radeon-4330HD"
[ 95.408] (==) Automatically adding devices
[ 95.408] (==) Automatically enabling devices
[ 95.467] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.467] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 95.467] Entry deleted from font path.
[ 95.489] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 95.489] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 95.489] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 95.489] (II) Loader magic: 0x81f1f80
[ 95.489] (II) Module ABI versions:
[ 95.490] X.Org ANSI C Emulation: 0.4
[ 95.490] X.Org Video Driver: 8.0
[ 95.490] X.Org XInput driver : 11.0
[ 95.490] X.Org Server Extension : 4.0
[ 95.491] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0281 rev 7, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004110/8
[ 95.491] (--) PCI: (0:1:0:0) 1002:9552:1025:0281 rev 0, Mem @ 0xd0000000/268435456, 0xf4400000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 95.491] (II) Open ACPI successful (/var/run/acpid.socket)
[ 95.491] (II) "extmod" will be loaded by default.
[ 95.491] (II) "dbe" will be loaded by default.
[ 95.491] (II) "glx" will be loaded by default.
[ 95.491] (II) "record" will be loaded by default.
[ 95.492] (II) "dri" will be loaded by default.
[ 95.492] (II) "dri2" will be loaded by default.
[ 95.492] (II) LoadModule: "extmod"
[ 95.492] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 95.506] (II) Module extmod: vendor="X.Org Foundation"
[ 95.506] compiled for 1.9.2, module version = 1.0.0
[ 95.506] Module class: X.Org Server Extension
[ 95.506] ABI class: X.Org Server Extension, version 4.0
[ 95.506] (II) Loading extension MIT-SCREEN-SAVER
[ 95.506] (II) Loading extension XFree86-VidModeExtension
[ 95.506] (II) Loading extension XFree86-DGA
[ 95.506] (II) Loading extension DPMS
[ 95.506] (II) Loading extension XVideo
[ 95.506] (II) Loading extension XVideo-MotionCompensation
[ 95.506] (II) Loading extension X-Resource
[ 95.506] (II) LoadModule: "dbe"
[ 95.506] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 95.509] (II) Module dbe: vendor="X.Org Foundation"
[ 95.509] compiled for 1.9.2, module version = 1.0.0
[ 95.509] Module class: X.Org Server Extension
[ 95.509] ABI class: X.Org Server Extension, version 4.0
[ 95.509] (II) Loading extension DOUBLE-BUFFER
[ 95.509] (II) LoadModule: "glx"
[ 95.510] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 95.528] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 95.528] compiled for 7.6.0, module version = 1.0.0
[ 95.529] (II) Loading extension GLX
[ 95.529] (II) LoadModule: "record"
[ 95.529] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 95.529] (II) Module record: vendor="X.Org Foundation"
[ 95.529] compiled for 1.9.2, module version = 1.13.0
[ 95.529] Module class: X.Org Server Extension
[ 95.529] ABI class: X.Org Server Extension, version 4.0
[ 95.529] (II) Loading extension RECORD
[ 95.529] (II) LoadModule: "dri"
[ 95.530] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 95.535] (II) Module dri: vendor="X.Org Foundation"
[ 95.535] compiled for 1.9.2, module version = 1.0.0
[ 95.535] ABI class: X.Org Server Extension, version 4.0
[ 95.535] (II) Loading extension XFree86-DRI
[ 95.535] (II) LoadModule: "dri2"
[ 95.535] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 95.536] (II) Module dri2: vendor="X.Org Foundation"
[ 95.536] compiled for 1.9.2, module version = 1.2.0
[ 95.536] ABI class: X.Org Server Extension, version 4.0
[ 95.536] (II) Loading extension DRI2
[ 95.536] (II) LoadModule: "fglrx"
[ 95.536] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 95.719] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 95.731] compiled for 1.4.99.906, module version = 8.81.5
[ 95.731] Module class: X.Org Video Driver
[ 95.736] (II) Loading sub module "fglrxdrm"
[ 95.736] (II) LoadModule: "fglrxdrm"
[ 95.736] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.765] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 95.765] compiled for 1.4.99.906, module version = 8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Version Identifier:8.81.5
[ 95.765] (II) ATI Proprietary Linux Driver Release Identifier: 8.812
[ 95.765] (II) ATI Proprietary Linux Driver Build Date: Jan 4 2011 21:30:56
[ 95.765] (--) using VT number 7
[ 95.767] (WW) Falling back to old probe method for fglrx
[ 95.852] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 95.861] (--) Chipset Supported AMD Graphics Processor (0x9552) found
[ 95.862] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 95.862] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 95.871] (II) AMD Video driver is signed
[ 95.871] (II) fglrx(0): pEnt->device->identifier=0x8f63678
[ 95.872] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 95.873] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 95.873] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 95.873] (==) fglrx(0): Default visual is TrueColor
[ 95.873] (**) fglrx(0): Option "DPMS" "true"
[ 95.873] (==) fglrx(0): RGB weight 888
[ 95.873] (II) fglrx(0): Using 8 bits per RGB
[ 95.873] (==) fglrx(0): Buffer Tiling is ON
[ 95.874] (II) Loading sub module "fglrxdrm"
[ 95.874] (II) LoadModule: "fglrxdrm"
[ 95.874] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiDynamicMajor: found major device number 252
[ 95.876] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 95.876] ukiOpenDevice: node name is /dev/ati/card0
[ 95.876] ukiOpenDevice: open result is 11, (OK)
[ 95.876] ukiOpenByBusid: ukiOpenMinor returns 11
[ 95.876] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 95.876] (==) fglrx(0): NoAccel = NO
[ 95.876] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 95.876] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4300 Series" (Chipset = 0x9552)
[ 95.876] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0281)
[ 95.876] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 95.876] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 95.876] (--) fglrx(0): MMIO registers at 0xf4400000
[ 95.876] (--) fglrx(0): I/O port at 0x00003000
[ 95.877] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 95.889] (II) fglrx(0): AC Adapter is used
[ 96.174] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 96.174] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 96.174] (II) fglrx(0): PCIE card detected
[ 96.174] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 96.174] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 96.180] (II) fglrx(0): Using adapter: 1:0.0.
[ 96.224] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 96.453] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 96.453] (II) fglrx(0): RandR 1.2 support is enabled!
[ 96.453] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 96.453] (==) fglrx(0): Center Mode is disabled
[ 96.453] (II) Loading sub module "fb"
[ 96.453] (II) LoadModule: "fb"
[ 96.454] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 96.475] (II) Module fb: vendor="X.Org Foundation"
[ 96.475] compiled for 1.9.2, module version = 1.0.0
[ 96.475] ABI class: X.Org ANSI C Emulation, version 0.4
[ 96.475] (II) Loading sub module "ddc"
[ 96.475] (II) LoadModule: "ddc"
[ 96.475] (II) Module "ddc" already built-in
[ 96.725] (II) fglrx(0): Finished Initialize PPLIB!
[ 96.773] (II) fglrx(0): Output LVDS using monitor section native-monitor
[ 96.773] (II) fglrx(0): Output DFP1 has no monitor section
[ 96.773] (II) fglrx(0): Output CRT1 has no monitor section
[ 96.785] (II) Loading sub module "ddc"
[ 96.785] (II) LoadModule: "ddc"
[ 96.786] (II) Module "ddc" already built-in
[ 96.786] (II) fglrx(0): Connected Display0: LVDS
[ 96.786] (II) fglrx(0): Display0: Failed to get EDID information.
[ 96.862] (II) fglrx(0): Cannot get EDID information for LVDS
[ 96.862] (II) fglrx(0): EDID for output LVDS
[ 96.862] (II) fglrx(0): Not using mode "640x350" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "720x400" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "640x480" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "800x600" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "848x480" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1024x768i" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1024x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1152x864" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (monitor doesn't support reduced blanking)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x800" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x960" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1280x1024" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (unknown reason)
[ 96.880] (II) fglrx(0): Not using mode "1360x768" (vrefresh out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (hsync out of range)
[ 96.880] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1400x1050" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1440x900" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (hsync out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1600x1200" (vrefresh out of range)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1792x1344" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1856x1392" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1200" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "1920x1440" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Not using mode "2560x1600" (width too large for virtual size)
[ 96.881] (II) fglrx(0): Printing probed modes for output LVDS
[ 96.881] (II) fglrx(0): Modeline "1366x768"x60.0 69.50 1366 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x768"x60.0 69.50 1280 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1280x720"x60.0 69.50 1280 1414 1446 1466 720 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x768"x60.0 69.50 1024 1414 1446 1466 768 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "1024x600"x60.0 69.50 1024 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x600"x60.0 69.50 800 1414 1446 1466 600 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "800x480"x60.0 69.50 800 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "720x480"x60.0 69.50 720 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): Modeline "640x480"x60.0 69.50 640 1414 1446 1466 480 771 777 790 +hsync +vsync (47.4 kHz)
[ 96.881] (II) fglrx(0): EDID for output DFP1
[ 96.881] (II) fglrx(0): EDID for output CRT1
[ 96.881] (II) fglrx(0): Output LVDS connected
[ 96.881] (II) fglrx(0): Output DFP1 disconnected
[ 96.882] (II) fglrx(0): Output CRT1 disconnected
[ 96.882] (II) fglrx(0): Using exact sizes for initial modes
[ 96.882] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 96.882] (II) fglrx(0): DPI set to (96, 96)
[ 96.882] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4300 Series has 2 configurable heads and 1 displays connected.
[ 96.882] (==) fglrx(0): PseudoColor visuals disabled
[ 96.882] (II) Loading sub module "ramdac"
[ 96.882] (II) LoadModule: "ramdac"
[ 96.882] (II) Module "ramdac" already built-in
[ 96.882] (==) fglrx(0): NoDRI = NO
[ 96.882] (==) fglrx(0): Capabilities: 0x00000000
[ 96.882] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 96.882] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 96.882] (==) fglrx(0): UseFastTLS=0
[ 96.882] (==) fglrx(0): BlockSignalsOnLock=1
[ 96.882] (--) Depth 24 pixmap format is 32 bpp
[ 96.882] (II) Loading extension ATIFGLRXDRI
[ 96.882] (II) fglrx(0): doing swlDriScreenInit
[ 96.882] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.882] ukiDynamicMajor: found major device number 252
[ 96.883] ukiDynamicMajor: found major device number 252
[ 96.883] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 96.883] ukiOpenDevice: node name is /dev/ati/card0
[ 96.883] ukiOpenDevice: open result is 12, (OK)
[ 96.883] ukiOpenByBusid: ukiOpenMinor returns 12
[ 96.883] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 96.883] (II) fglrx(0): [uki] DRM interface version 1.0
[ 96.883] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 96.883] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 96.883] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb76f0000
[ 96.883] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 96.883] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 96.883] (II) fglrx(0): swlDriScreenInit done
[ 96.883] (II) fglrx(0): Kernel Module Version Information:
[ 96.883] (II) fglrx(0): Name: fglrx
[ 96.883] (II) fglrx(0): Version: 8.81.5
[ 96.883] (II) fglrx(0): Date: Jan 4 2011
[ 96.883] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 96.883] (II) fglrx(0): Kernel Module version matches driver.
[ 96.883] (II) fglrx(0): Kernel Module Build Time Information:
[ 96.883] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.36-ARCH
[ 96.883] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 96.883] (II) fglrx(0): Build-Kernel __SMP__: no
[ 96.883] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 96.883] (II) fglrx(0): [uki] register handle = 0x00004000
[ 96.922] (II) fglrx(0): DRI initialization successfull
[ 96.922] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 96.933] (==) fglrx(0): Backing store disabled
[ 96.933] (II) Loading extension FGLRXEXTENSION
[ 96.933] (**) fglrx(0): DPMS enabled
[ 96.934] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 96.934] (**) fglrx(0): Textured Video is enabled.
[ 96.934] (II) LoadModule: "glesx"
[ 96.944] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 97.061] (II) Module glesx: vendor="X.Org Foundation"
[ 97.062] compiled for 1.4.99.906, module version = 1.0.0
[ 97.062] (II) Loading extension GLESX
[ 97.062] (II) fglrx(0): GLESX enableFlags = 528
[ 97.062] (II) fglrx(0): GLESX is enabled
[ 97.062] (II) LoadModule: "amdxmm"
[ 97.062] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 97.072] (II) Module amdxmm: vendor="X.Org Foundation"
[ 97.072] compiled for 1.4.99.906, module version = 2.0.0
[ 97.072] (II) Loading extension AMDXVOPL
[ 97.072] (II) Loading extension AMDXVBA
[ 97.091] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 97.094] (II) fglrx(0): Enable composite support successfully
[ 97.094] (WW) fglrx(0): Option "VendorName" is not used
[ 97.094] (WW) fglrx(0): Option "ModelName" is not used
[ 97.094] (II) fglrx(0): X context handle = 0x1
[ 97.094] (II) fglrx(0): [DRI] installation complete
[ 97.094] (==) fglrx(0): Silken mouse enabled
[ 97.101] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 97.101] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 97.101] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 97.101] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 98.234] (--) RandR disabled
[ 98.234] (II) Initializing built-in extension Generic Event Extension
[ 98.234] (II) Initializing built-in extension SHAPE
[ 98.234] (II) Initializing built-in extension MIT-SHM
[ 98.234] (II) Initializing built-in extension XInputExtension
[ 98.234] (II) Initializing built-in extension XTEST
[ 98.234] (II) Initializing built-in extension BIG-REQUESTS
[ 98.234] (II) Initializing built-in extension SYNC
[ 98.234] (II) Initializing built-in extension XKEYBOARD
[ 98.234] (II) Initializing built-in extension XC-MISC
[ 98.234] (II) Initializing built-in extension SECURITY
[ 98.234] (II) Initializing built-in extension XINERAMA
[ 98.234] (II) Initializing built-in extension XFIXES
[ 98.234] (II) Initializing built-in extension RENDER
[ 98.234] (II) Initializing built-in extension RANDR
[ 98.234] (II) Initializing built-in extension COMPOSITE
[ 98.234] (II) Initializing built-in extension DAMAGE
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiDynamicMajor: found major device number 252
[ 98.240] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 98.240] ukiOpenDevice: node name is /dev/ati/card0
[ 98.240] ukiOpenDevice: open result is 13, (OK)
[ 98.240] ukiOpenByBusid: ukiOpenMinor returns 13
[ 98.240] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 98.965] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 99.057] (II) fglrx(0): Enable the clock gating!
[ 99.058] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 99.597] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 99.597] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.597] (II) LoadModule: "evdev"
[ 99.611] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 99.622] (II) Module evdev: vendor="X.Org Foundation"
[ 99.622] compiled for 1.9.0, module version = 2.5.0
[ 99.622] Module class: X.Org XInput Driver
[ 99.622] ABI class: X.Org XInput driver, version 11.0
[ 99.622] (**) Power Button: always reports core events
[ 99.622] (**) Power Button: Device: "/dev/input/event5"
[ 99.630] (--) Power Button: Found keys
[ 99.630] (II) Power Button: Configuring as keyboard
[ 99.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.630] (**) Option "xkb_rules" "evdev"
[ 99.630] (**) Option "xkb_model" "evdev"
[ 99.630] (**) Option "xkb_layout" "us"
[ 99.695] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 99.695] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.695] (**) Video Bus: always reports core events
[ 99.695] (**) Video Bus: Device: "/dev/input/event7"
[ 99.703] (--) Video Bus: Found keys
[ 99.703] (II) Video Bus: Configuring as keyboard
[ 99.703] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.703] (**) Option "xkb_rules" "evdev"
[ 99.703] (**) Option "xkb_model" "evdev"
[ 99.703] (**) Option "xkb_layout" "us"
[ 99.704] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 99.704] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.704] (**) Video Bus: always reports core events
[ 99.704] (**) Video Bus: Device: "/dev/input/event8"
[ 99.713] (--) Video Bus: Found keys
[ 99.713] (II) Video Bus: Configuring as keyboard
[ 99.713] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 99.713] (**) Option "xkb_rules" "evdev"
[ 99.713] (**) Option "xkb_model" "evdev"
[ 99.713] (**) Option "xkb_layout" "us"
[ 99.731] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 99.731] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.731] (**) Power Button: always reports core events
[ 99.731] (**) Power Button: Device: "/dev/input/event1"
[ 99.753] (--) Power Button: Found keys
[ 99.753] (II) Power Button: Configuring as keyboard
[ 99.753] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 99.753] (**) Option "xkb_rules" "evdev"
[ 99.753] (**) Option "xkb_model" "evdev"
[ 99.753] (**) Option "xkb_layout" "us"
[ 99.754] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 99.754] (II) No input driver/identifier specified (ignoring)
[ 99.754] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 99.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 99.755] (**) Sleep Button: always reports core events
[ 99.755] (**) Sleep Button: Device: "/dev/input/event4"
[ 99.770] (--) Sleep Button: Found keys
[ 99.770] (II) Sleep Button: Configuring as keyboard
[ 99.770] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 99.770] (**) Option "xkb_rules" "evdev"
[ 99.770] (**) Option "xkb_model" "evdev"
[ 99.770] (**) Option "xkb_layout" "us"
[ 99.773] (II) config/udev: Adding input device HD Video WebCam (/dev/input/event10)
[ 99.773] (**) HD Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 99.773] (**) HD Video WebCam: always reports core events
[ 99.773] (**) HD Video WebCam: Device: "/dev/input/event10"
[ 99.796] (--) HD Video WebCam: Found keys
[ 99.796] (II) HD Video WebCam: Configuring as keyboard
[ 99.796] (II) XINPUT: Adding extended input device "HD Video WebCam" (type: KEYBOARD)
[ 99.796] (**) Option "xkb_rules" "evdev"
[ 99.796] (**) Option "xkb_model" "evdev"
[ 99.796] (**) Option "xkb_layout" "us"
[ 99.797] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 99.798] (II) No input driver/identifier specified (ignoring)
[ 99.806] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 99.806] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 99.806] (**) AT Translated Set 2 keyboard: always reports core events
[ 99.806] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 99.823] (--) AT Translated Set 2 keyboard: Found keys
[ 99.823] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 99.823] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 99.823] (**) Option "xkb_rules" "evdev"
[ 99.823] (**) Option "xkb_model" "evdev"
[ 99.823] (**) Option "xkb_layout" "us"
[ 99.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 99.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 99.824] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found 10 mouse buttons
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 99.840] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 99.840] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 99.840] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 99.840] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 99.840] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 99.840] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 99.840] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 99.840] (II) No input driver/identifier specified (ignoring)
[ 99.841] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 99.841] (II) No input driver/identifier specified (ignoring)
[ 100.317] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 103.491] (II) fglrx(0): Preparing normal LeaveVT...
[ 103.860] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 103.860] (II) fglrx(0): Backup framebuffer data.
[ 103.860] (II) fglrx(0): Backup complete.
[ 119.766] (II) fglrx(0): Preparing normal EnterVT...
[ 119.766] (II) Open ACPI successful (/var/run/acpid.socket)
[ 119.766] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 120.803] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 121.433] (II) fglrx(0): Hot-plug event occurs on device: 1:0:0
[ 124.299] (II) fglrx(0): Preparing normal LeaveVT...
[ 124.633] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 124.633] (II) fglrx(0): Backup framebuffer data.
[ 124.633] (II) fglrx(0): Backup complete.
All seems normal to me.
Here is my X configuration (/etc/X11/xorg.conf.d/10-monitor.conf) :
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "base-screen" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "native-monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon-4330HD"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "base-screen"
Device "radeon-4330HD"
Monitor "native-monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768_60.00"
EndSubSection
EndSection
I initially wanted to use slim as a login manager but it always complains about not beeing able to connect to any X server.
As a bonus I give you my rc.conf, might be usefull :
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(fglrx)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(!eth0 !wlan0)
eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.100.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal acpid network !netfs crond !wicd)
I tried those tips Archlinux Catalyst Wiki but it didn't help.
I may be missing something obvious, but I am quite desperate so any help is welcome.
I can give you any other log that would be meaningfull to you.
Thanks for helping Archlinux to spread a little more.

i have this problem
lspci|grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M93 [Mobility Radeon HD 4500 Series]
when I have install catalyst-utils 11.1 and catalyst-daemons .after rebooting i saw a black screen.
if I install xf86-video-ati occures lots of crash of KWIN plasma desktop .
i want using Catalyst

Mouse skip imac 27 (ATI Radeon HD 5750) and second monitor

Hi
Yesterday i bought a new mousepad and a second monitor
I noticed that i had some trouble with my mouse skipping around the monitor, and my first thought was for my mousepad texture, but is not that
this morning i tried:
- with different surfaces, but with no luck - still skipping around
- try different mouse: a small laptop mouse - still skipping around
- try different mouse: old mighty mouse (USB) - still skipping around (it is also very slow even a top speed)
- then i try different USB ports - still skipping around
after that i thought at yesterday changes... since the mac is new, i did install some different software and A NEW MONITOR
so i tried to unplug the new monitor and the mouse works fine.... i actually got a little worried
i did plug the monitor again, turn it back on and everything worked... turn monitor off and mouse skips around
SO.. the problem is that with a second monitor pluged in but turned off, mouse get crazy
CAN'T MOVE THIS DISCUSSION OR DELETE? WRONG CATEGORY

https://discussions.apple.com/message/15340928#15340928

Shoddy Resolution - ATI Radeon X1900 XT and HDTV

Hi guys,
I'm having a problem here with my resolution. I've got a 26" Polaroid HDTV that I've just switched over to using as my Mac's monitor. The resolution through HDTV was astounding (1080i) and now switching to the DVI-D input on the TV to use it as a monitor it's really bad. My question is this, is it possible to use DVI-to-component cables for a monitor with this video card or am I stuck at 1280x1024 at 60hz as specified in the manual for the TV? It would really stink if I couldn't because the TV and the video card cost so much and the TV is brilliant with a component signal (no HDMI unfortunately).

The problem was the TV. :/

Leopard ATI Radeon X1900 XT Freezing Issue, fixed with 10.5.2?

Mac Pro (8-core) original 3.0Ghz 8 core. Purchased October 2007. Ran Tiger 10.4.10 from the box. updated to 10.4.11. ATI Firmware update was not required as it was pre-installed. Never had a crash. Installed Leopard 2 days after release. Installed 10.5.1 the day of release. No problems so far...
A week later watching the "Jelly" iTunes Visualizer, the Screen froze, but iTunes kept playing... The machine was reachable over SSH but very much useless as a reboot command hung. Hard reset, went about my business. A day later unit froze during iTunes Jelly Visualizer again. this time music also crashed. As I approached to reboot the unit noticed very loud video card fan noise. Extracted the burning hot card, later compress air removed some clogging dust bunnies. Reinstalled card and no more freezes for 2 weeks. Freezes again, this time watching youtube in Safari. Made sure data backup is up to date. Performed an Archive and Install of leopard, ran all updates to 10.5.1. This time Mac Pro was fine for a week .... *Freeze*.
Called apple care, after having to explain to a rep what itunes visualizer was, referred to iPod specialist, who transfered me to Mac Pro specialist, 1 hour later, thoroughly explain issues to rep, who after 45 minutes was convinced issue with HW and not SW . Apple sends Do It Yourself repair video card. I replaced it. 4 days later unit Froze again. This time watching movie on VLC...
A week later 10.5.2 was released, and shortly thereafter Leopard Graphics Update 1. So far **nervously knock on wood** no more freezes. I am hoping that whatever black magic was included in these recent updates fixes the Leopard crashes with ATI Radeon X1900 XT. Needless to say this is the last ATI Radeon I "buy".
I need to know and track other users findings issues and experience with Leopard and the ATI Radeon X1900 XT on a Mac Pro. Been reading about a lot of issues with Leopard and the ATI Radeon X1900 XT on the these boards. Google turns up info galore. ...
I am holding my breath

Spoke too soon. Today as I was leaving the house I set the Mac Pro to sleep. When I attempted to wake the machine upon return, display 1 became all garbled. Display 2 was still visible and the mouse moved, but I was not able to click any windows. I ssh'd in with my macbookpro and was able to do a "sudo reboot". In the process it got stuck and in a loop I received:
Feb 17 16:02:37 octagon kernel[0]: ** ASIC Hang Log End **
Feb 17 16:02:38 octagon kernel[0]: ATIRadeon::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 0, need 5. RBBM_STATUS 0x9001c100
Feb 17 16:02:50 octagon kernel[0]: ** ASIC Hang Log Start **
Feb 17 16:02:35 octagon kernel[0]: 860:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 861:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 862:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 863:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 864:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 865:0x00008020
Feb 17 16:02:35 octagon kernel[0]: 866:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 867:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 868:0x00010000
Feb 17 16:02:35 octagon kernel[0]: 869:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 870:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 871:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 872:0x00040000
Feb 17 16:02:35 octagon kernel[0]: 873:0x00008024
Feb 17 16:02:35 octagon kernel[0]: 874:0x00100100
Feb 17 16:02:35 octagon kernel[0]: 875:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 876:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 877:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 878:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 879:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 880:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 881:0x00009020
Feb 17 16:02:35 octagon kernel[0]: 882:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 883:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 884:0x02090000
Feb 17 16:02:36 octagon kernel[0]: 885:0x00002808
Feb 17 16:02:36 octagon kernel[0]: 886:0x00020004
Feb 17 16:02:36 octagon kernel[0]: 887:0x00100000
Feb 17 16:02:36 octagon kernel[0]: 888:0x00840100
Needless to say I had to hard reset....

Brandnew 8-core MacPro and ATI Radeon X1900 xt

I had this quadcore MacPro with an ATI Radeon X1900 XT and now I am switching to a newer octo-core MacPro.
I managed to install the card into the computer case. But alas, i don't see anything on my screen...
System Profiler discovers the card but gives it an generic name "Display" with Vendor ATI and DeviceID 0x7249.
But no "displays" found attached to it, which is b.s.
Please please don't tell me i cannot use this graphics card in the octo-core MacPro?!

I am surprised .... I don't have (any ideas), so I don't know for sure
You know, that doesn't help or further things and puts out false ideas that there even might. Then I'll hear "but I read somewhere something."
Apple changed the firmware on 2008. That is well known and pretty obvious, and graphic cards have to follow suit.
Nvidia doesn't seem to know or follow ATI's path of using a "hybred" (for want of better term) EFD? ROM that works across EFI32 and EFI64. Been explained over and over, or if not explained, given as cause to why.
At least we have a few years before EFI128!
NVidia GeForce 7400 gfx card
Now that is very elusive.
The 7300GT works only in 2006-7 Mac Pro, which were dual processor / dual or quad-core, but all used EFI32; 667MHz FBDIMM; had 1333MHz front side bus; PCIe 1.0/1.1 (but not PCIe 2.0 that came out in 2008).
And with brand new 2009, DDR3, you graphic option is really between GTX 285 and ATI HD 4870 - forget the GT120 even as a viable option for most.

NVIDIA GeForce 120 or ATI Radeon X1900... which is better?

Hi-
I currently have the ATI Radeon X1900 graphics card installed in my Mac Pro 2.26 Nehalem. I'm not having any issue's with the card except that the fans turn On quite frequently, and they're a little loud.
I'm not using it for any games, etc... My primary use is with Pro Tools (a music DAW application).
The ATI Radeon X1900 is running a Apple 30" display and a Sony Bravia 46" LCD.
If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
Thanks in advance.

If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
If your Mac Pro came with ATI Radeon X1900, then it needs a card with EFI-32 firmware. The NVIDIA GeForce 120 has EFI-64 firmware, and won't work in the pre 2008 Mac Pro. The only upgrade for early Mac Pros is the ATI Radeon HD 4870
<http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2NTc>
(Despite what Apple says, it will work in any Mac Pro.)
You will need a Mini DisplayPort adapter for the second display,

Please help: what options do we have other than ATI Radeon X1900 XT

I think my video card (ATI Radeon X1900 XT) is about to die and I'm trying to figure out what to replace it with. (I'm on a 1st gen MacPro, still on Tiger).
What I can't easily figure out from this site, however, is a list of alternative cards I could purchase that will fit in this machine. I gather from the ratings that the ATI X1900 has failed for just about everyone that has used it intensely. And I'd like to avoid buying the same one that is about to fail for me now, but how can I tell what my alternatives are and if they will fit in the slot and/or be compatible with my machine?
I have been to the Mac Pro spec area, and it lists these as the "build to order" options:
* ATI Radeon X1900 XT 512MB (two dual-link DVI)
* NVIDIA Quadro FX 4500 512MB (stereo 3D, two dual-link DVI)
* Two NVIDIA GeForce 7300 GT 256MB
* Three NVIDIA GeForce 7300 GT 256MB
* Four NVIDIA GeForce 7300 GT 256MB
are those the only cards I can choose from? Are there any other better options?
Forgive me if I sound like a totally idiot. I'm just trying to learn...

You should visit Bare Feats and see the various reviews and benchmarks. You have several options now available besides the ones that came originally with your model. There is now an NVidia 8800 card in a version for pre-2008 MPs, the ATI 2600, and the new ATI 3870 just released. You can learn more at Bare Feats and by searching the MP forums.
You have posted this topic in the MacBook Pro forum which is the wrong forum for your question.

Question about ATI Radeon X1900

I have the ATI Radeon X1900 (512mb) and the fan on the card runs consistently... as in never stops unless the machine is asleep or off.
Is this normal behavior for this card?
I have a MacPro 8Core and a 30" Cinema Display.
I appreciate any insight.
MacPro Mac OS X (10.4.9) 30" Cinema Display

Yes, it's audible although how much depends on your environment and hearing. Like you I wish mine were quieter but I'm used to it now.

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

Similar Messages

Maybe you are looking for