Crashed while Encoding
Hi,
I was encoding a 90min video using Professional Quality. When there was about 5 and a half hours left, iDVD stopped responding and came up with an error report (which I unfortunately closed ). Is there a reason why this happened? Or a way to stop it from happening again? I have a bit over 20GB of free space as well...
Hope you can help!
Thanks,
Jia Wen
Message was edited by: Jia Wers
Hi
Not knowing the origin to Your problem - General approach when in trouble is as follows:
Many possible origins. Most common:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/acount* - log into this and re-try
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4 - is OK
• iDVD (08) Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Yours Bengt W
Similar Messages
-
Z77A crashing while encoding video
I just did a partial upgrade, keeping my WD Green HD, DDR3 and Nvidia GTX 470 while adding in a Z77A-GD65 and Core i5. When I attempt to use XMedia Recode I get anything from an immediate full power off to a delayed power off before reaching 10% encode.
Running Win 7 Ultimate and Bios V 10.6.I've not been able to determine if the program uses CPU or GPU, I did upgrade after the failure to the latest version with the same results. Some additional info:
I know longer test runs are needed, but just to get some quick potentially useful additional info - The following tests for 5 min each all came out clean with one exception:
Handbrake video re-encode(Though this doesn't support the wider range of files I need)
Folding at Home
Prime 95 using all 3 radio options plus custom with 0 RAM used (Though on the very first use I tried opening up MSI's Control Center to view Temps/CPU Frequency and got a full system freeze-Attempting to recreate this scenario was unsuccessful)
Memtest86+ fully run with no errors
I did not re-install my OS after the HW upgrade, though this is getting to the point that I'm ready to try it on a spare drive.
I'm not normally getting blue screens at the point of crash, just an instant total cut of power, black screen, dead case LED, quick speaker pop. I did however, get one BSOD upon my first boot immediately after the HW upgrade. It happened a second time following circumstances I don't recall. All of the other dozen plus crashes have not been BSOD.
Mini Dump file: https://docs.google.com/open?id=0B60BwB6lIhTMRGcxbHFpUXoxcm8 -
Premiere Pro painfully slow or crashes while encoding on reasonable system?
Hi Folks, I'm new to the forum and new to premiere pro. I am having a real issue with encoding videos. If I have any fx on like Magic Bullet Looks then the media encoder says it will take around 3 hours for an 8 minute video (h.264 HD for youtube) but my system seems to crash before it finishes encoding (some times blue screen, some times encoder error message). If I have no fx it still takes a couple of hours for an 8 minute video. This seems like an excessive amount of time, even for encoding my AVCHD files, which I know are notoriuosly slow to encode. I have the latest updates for Looks & PP.
My system:
Windows 7 Ultimate
Intel Q9550
Asus P5Q-EM
GTX 480 unlocked for CUDA
16GB 800mhz DDR2 RAM
500GB Western Digital HD
Which I would have thought was pretty decent for video encoding!
Anyway any help or suggestions on how to speed things up and maybe stop crashes welcomed.
ThanksHi
I had some BSOD's too in the beginning after building a new PC for PP CS5, but in my case it was the RAM, like Harm points out to be one reason, that was the problem.
You could run a memorytest or burn in test for a day or two just to stress the PC and see if it find anything.
http://www.memtest.org/
http://www.passmark.com/products/bit.htm
/Ulf -
Premiere Pro and Media Encoder crash while rendering H.264
Very recently, a problem's popped up where Premiere Pro and Media Encoder (CC) will crash while rendering H.264.
It's only while rendering H.264 - other formats seem to work fine.
And I don't mean that it returns an error, I mean it hard crashes with a Windows "Adobe Premiere Pro CC has stopped working" popup.
It doesn't crash at a consistent time during the render, even on the same project. Occasionally, it won't crash at all, but this is usually not the case.
I've tried disabling CUDA and my overclock to no avail. Please help!On the topic of opening a project on the exact same version of Premiere Pro CC 2014 (yes it is definitely up to date, and the 2014 version), to overcome this export crash problem that ZachHinchy has brought up - you can't. Technically speaking, one should easily be able to open a Premiere Pro CC 2014 project from one system on another system running the exact same up to date, legitimate version of Premiere Pro CC 2014 without any kind of error. But for some reason, this has been disallowed(?) by Adobe. It has facepalm written all over it. Does anyone agree that this is at least a little bit silly?
I have tried exporting a Final Cut Pro XML from my project to try and open the sequence at uni on a Mac, so I can render my project when I finish my edit. It half works - the clips are there, but the sequence is gone - i.e. 12 hours of painstaking sequencing and micro-edits that had me at several points in time wanting to insert my hand through my monitor with enough force to make a large hole. I really cannot afford redo this sequence, as my assignment is due tomorrow, and I have to work at 6 oclock in the morning, so I also cannot afford to stay up till the early hours of tomorrow morning. Wish me luck that some miraculous event has taken place overnight that will somehow allow me to just open my project, on the same version of Premiere, on a Mac, without hassle. (Apple OS is not friendly to anything but its own selfish nature, so I am having doubts).
Adobe please, if you can do anything at all to help, you will save my assignment, and my faith will be restored. Otherwise, I'll just get my money back and buy Final Cut instead.
I cant even
If I find a way to fix either of these problems, I will post straight away. -
IDVD does crash when encoding audio
I have been reading a large number of posts regarding iDVD freezing, having a spinning beachball, and hanging while encoding audio. I have not been able to find a post where it discusses the crashing/unexpected quitting of iDVD. I have tried a couple of times to get the burning process started, as I thought it may have been a small glitch, but to no avail.
Should I follow the steps marked out in:
http://discussions.apple.com/thread.jspa?threadID=335417&tstart=30
I usually complete the final process of iDVD with all Energy Saving and Screen Saver preferences set to "Never". I usually would delete encoded assets, but I did not have time before I went to work to try a third time.
This is the first time it has happened to me and I have completed about three projects successfully since updating to iDVD 6.0
Thanks in advance for your assistance.
RodgerSUCCESS (But it took a while!)
When I arrived home form work, the first thing I did was to remove Flip4Mac using its uninstaller. This had no effect. iDVD still crashed bringing up the crash report dialogue box.
So I followed the instructions from http://discussions.apple.com/thread.jspa?threadID=335417&tstart=30
I also repaired permissions (nothing to report there) and deleted encoded assests. Finally, I replayed my DVD project in the iDVD's preview/test section. The audio was out with the video. For some strange reason, my brain told me that the syncing between audio and video was the main thing to blame. So, I had a quick think and decided to remove all the fade ins and fade outs from my original iMovie project, remove all chapter markers, save the project, replace the chapter markers and then open the original iDVD file shared from this iMovie project. Then, clicked OK to update file to match, deleted encoded assests.
I do not know which part worked for me, but I woke this morning with a completed DVD (which is still to be tested in a DVD player).
Thanks for all the assistance and advice, I'll keep this post unresolved in case someone else has a full crash of iDVD.
Rodger GW
PS I think Apple are a little sick of seeing my crash report coming through with the answer to "What were you doing when the application crashed?" being "Just trying to encode audio!!"
RGW -
Hi,
recently CS 6 crashes while rendering, this happens at the beginning (ca. 800 frames), i change from GPU to CPU, deletet the cache files, try a different sequence
with other videos, all the same
in task manager i can't kill the premiere prozess
after crashing only the power/reset button helps
the strange is, at the same time my complete network crashes to ??
Windows 7 pro
16GB RAM
Genforce GTX570 Driver 340.52
Intel i7-2600K
With Media Encore there are no problems.
can someone help me ?The problem with PP CS6 crashing during render has increased from once in a while to where it cannot complete any renders.
---->>> Encoding to H.264 MP4. Seems to do fine on AVI renders. H.264 MP4 is the key to the problem. <<<---
The error that it is reporting says that the "output directory could not be found", but the problem is the same when rendering to a different (not RAID) drive. Does not crash with AVI render. Replaced H.264 Codec -->> No change. Crashed at 90% of a 50 second file render to lowest level MP4 file.
It is not the motherboard - Replaced Gigabyte with ASUS Sabertooth 990FX
It is not the CPU - Replaced AMD 6 core with AMD 8 core FX
It is not heat. Cabinet is cool, all fans are running, no dust, no blockage.
It is not power supply - Replaced 750 W power supply with 850 W power supply.
It is not memory - Increased memory from 16GB to 32 GB, Computer repair shop rotated and tested memory.
It is not virus (no email on this machine, current virus protection and security software).
It is not drive space - Increased RAID from 2TB to 8 TB - Problem actually got worse - (crashes sooner)
It is not the video card - drivers verified correct by Nvidia - (Quadro 4000) - tested by installing a different video card - No change.
It is not software install - Uninstalled total CS6 package and reinstalled.
It is not a specific render file - It will not complete any renders now.
It is not a recent software install - The only software that has been updated is Adobe but that was ruled out by the total uninstall/reinstall. Backup install on a laptop is able to complete renders on the files that crash on the "big" machine. Nothing new has been installed. Virus and SpyBot show "clear".
It is not the CUDA or Mercury setting - Tested with CUDA on and off.
It's not the Playback settings - Tested for GPU Acceleration and Mercury Playback Engine Software only.
It is not the C: drive - Replaced with SSD.
Ran while watching Performance Monitor - No hint of problem before crash point. (video available).
So, what are we missing?
Windows 7 Pro
64 Bit
32 GB Ram
8 TB RAID
ASUS Sabertooth 990FX
AMD FX8350 (8 core)
Performance Score: 7.1
Power Supply 850 W. -
So lately my IDVD program has been crashing while it writes whatever asset I've assigned to it. It goes through the encoding video/audio just fine, and it'll start writing, but before it manages to finish writing, or it gets to the Writing lead-out stage, it'll suddenly crash and that box will pop up and say, "iDVD quit unexpectedly".
I have been keeping my GBs above 25, so that's not the problem. Is there anything else I should do, or try?Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W -
Photoshop CC 64bit regularly crashes while working in 3D. My PC is Windows 8.1. I am trying to create 3D text but while I am adjusting extrusion depths or editing the materials, the program crashes. I am able adjust my graphics card settings to give more memory to Photoshop for 3D, but I don't know what are the best settings to use.
Here are my System Settings:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16322 MB
Free memory: 11910 MB
Memory available to Photoshop: 14588 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Disabled
TextComposer: Middle Eastern and South Asian
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=3072
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GT 640/PCIe/SSE2"
gpu[0].RendererID=4683
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.2702"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20130829000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="4.2.1"
gpu[0].OCLBandwidth=3.34988e+010
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number: 90970360143810218198
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
Temporary file path: C:\Users\Simon\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 2.71T, 2.17T free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
Installed components:
ACE.dll ACE 2013/10/29-11:47:16 79.548223 79.548223
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdobeLinguistic.dll Adobe Linguisitc Library 7.0.0
AdobeOwl.dll Adobe Owl 2013/10/25-12:15:59 5.0.24 79.547804
AdobePDFL.dll PDFL 2013/10/29-11:47:16 79.508720 79.508720
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1786
AdobeXMP.dll Adobe XMP Core 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPFiles.dll Adobe XMP Files 2013/10/29-11:47:16 79.154911 79.154911
AdobeXMPScript.dll Adobe XMP Script 2013/10/29-11:47:16 79.154911 79.154911
adobe_caps.dll Adobe CAPS 7,0,0,21
AGM.dll AGM 2013/10/29-11:47:16 79.548223 79.548223
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
aif_core.dll AIF 5.0 79.534508
aif_ocl.dll AIF 5.0 79.534508
aif_ogl.dll AIF 5.0 79.534508
amtlib.dll AMTLib (64 Bit) 7.0.0.249 BuildVersion: 7.0; BuildDate: Thu Nov 14 2013 15:55:50) 1.000000
ARE.dll ARE 2013/10/29-11:47:16 79.548223 79.548223
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2013/10/29-11:47:16 79.548223 79.548223
BIBUtils.dll BIBUtils 2013/10/29-11:47:16 79.548223 79.548223
boost_date_time.dll DVA Product 7.0.0
boost_signals.dll DVA Product 7.0.0
boost_system.dll DVA Product 7.0.0
boost_threads.dll DVA Product 7.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.6.30929 2.1.6.30929
CITThreading.dll Adobe CITThreading 2.1.6.30929 2.1.6.30929
CoolType.dll CoolType 2013/10/29-11:47:16 79.548223 79.548223
dvaaudiodevice.dll DVA Product 7.0.0
dvacore.dll DVA Product 7.0.0
dvamarshal.dll DVA Product 7.0.0
dvamediatypes.dll DVA Product 7.0.0
dvaplayer.dll DVA Product 7.0.0
dvatransport.dll DVA Product 7.0.0
dvaunittesting.dll DVA Product 7.0.0
dynamiclink.dll DVA Product 7.0.0
ExtendScript.dll ExtendScript 2013/10/30-13:12:12 79.546835 79.546835
FileInfo.dll Adobe XMP FileInfo 2013/10/25-03:51:33 79.154511 79.154511
filter_graph.dll AIF 5.0 79.534508
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2013/10/29-11:47:16 79.248139 79.248139
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OMP Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1785
mediacoreif.dll DVA Product 7.0.0
MPS.dll MPS 2013/10/29-11:47:16 79.535029 79.535029
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.8428
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
PatchMatch.dll PatchMatch 2013/10/29-11:47:16 79.542390 79.542390
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC CC
Plugin.dll Adobe Photoshop CC CC
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 4.2.0.36
PSArt.dll Adobe Photoshop CC CC
PSViews.dll Adobe Photoshop CC CC
SCCore.dll ScCore 2013/10/30-13:12:12 79.546835 79.546835
ScriptUIFlex.dll ScriptUIFlex 2013/10/30-13:12:12 79.546835 79.546835
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 1, 2012, 1003
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
WRServices.dll WRServices Mon Feb 25 2013 16:09:10 Build 0.19078 0.19078
Required plug-ins:
3D Studio 14.2.1 (14.2.1 x001)
Accented Edges 14.2.1
Adaptive Wide Angle 14.2.1
Angled Strokes 14.2.1
Average 14.2.1 (14.2.1 x001)
Bas Relief 14.2.1
BMP 14.2.1
Camera Raw 8.3
Camera Raw Filter 8.3
Chalk & Charcoal 14.2.1
Charcoal 14.2.1
Chrome 14.2.1
Cineon 14.2.1 (14.2.1 x001)
Clouds 14.2.1 (14.2.1 x001)
Collada 14.2.1 (14.2.1 x001)
Color Halftone 14.2.1
Colored Pencil 14.2.1
CompuServe GIF 14.2.1
Conté Crayon 14.2.1
Craquelure 14.2.1
Crop and Straighten Photos 14.2.1 (14.2.1 x001)
Crop and Straighten Photos Filter 14.2.1
Crosshatch 14.2.1
Crystallize 14.2.1
Cutout 14.2.1
Dark Strokes 14.2.1
De-Interlace 14.2.1
Dicom 14.2.1
Difference Clouds 14.2.1 (14.2.1 x001)
Diffuse Glow 14.2.1
Displace 14.2.1
Dry Brush 14.2.1
Eazel Acquire 14.2.1 (14.2.1 x001)
Embed Watermark 4.0
Entropy 14.2.1 (14.2.1 x001)
Extrude 14.2.1
FastCore Routines 14.2.1 (14.2.1 x001)
Fibers 14.2.1
Film Grain 14.2.1
Filter Gallery 14.2.1
Flash 3D 14.2.1 (14.2.1 x001)
Fresco 14.2.1
Glass 14.2.1
Glowing Edges 14.2.1
Google Earth 4 14.2.1 (14.2.1 x001)
Grain 14.2.1
Graphic Pen 14.2.1
Halftone Pattern 14.2.1
HDRMergeUI 14.2.1
IFF Format 14.2.1
Ink Outlines 14.2.1
JPEG 2000 14.2.1
Kurtosis 14.2.1 (14.2.1 x001)
Lens Blur 14.2.1
Lens Correction 14.2.1
Lens Flare 14.2.1
Liquify 14.2.1
Matlab Operation 14.2.1 (14.2.1 x001)
Maximum 14.2.1 (14.2.1 x001)
Mean 14.2.1 (14.2.1 x001)
Measurement Core 14.2.1 (14.2.1 x001)
Median 14.2.1 (14.2.1 x001)
Mezzotint 14.2.1
Minimum 14.2.1 (14.2.1 x001)
MMXCore Routines 14.2.1 (14.2.1 x001)
Mosaic Tiles 14.2.1
Multiprocessor Support 14.2.1 (14.2.1 x001)
Neon Glow 14.2.1
Note Paper 14.2.1
NTSC Colors 14.2.1 (14.2.1 x001)
Ocean Ripple 14.2.1
Oil Paint 14.2.1
OpenEXR 14.2.1
Paint Daubs 14.2.1
Palette Knife 14.2.1
Patchwork 14.2.1
Paths to Illustrator 14.2.1
PCX 14.2.1 (14.2.1 x001)
Photocopy 14.2.1
Photoshop 3D Engine 14.2.1 (14.2.1 x001)
Photoshop Touch 14.0
Picture Package Filter 14.2.1 (14.2.1 x001)
Pinch 14.2.1
Pixar 14.2.1 (14.2.1 x001)
Plaster 14.2.1
Plastic Wrap 14.2.1
PNG 14.2.1
Pointillize 14.2.1
Polar Coordinates 14.2.1
Portable Bit Map 14.2.1 (14.2.1 x001)
Poster Edges 14.2.1
Radial Blur 14.2.1
Radiance 14.2.1 (14.2.1 x001)
Range 14.2.1 (14.2.1 x001)
Read Watermark 4.0
Reticulation 14.2.1
Ripple 14.2.1
Rough Pastels 14.2.1
Save for Web 14.2.1
ScriptingSupport 14.2.1
Shake Reduction 14.2.1
Shear 14.2.1
Skewness 14.2.1 (14.2.1 x001)
Smart Blur 14.2.1
Smudge Stick 14.2.1
Solarize 14.2.1 (14.2.1 x001)
Spatter 14.2.1
Spherize 14.2.1
Sponge 14.2.1
Sprayed Strokes 14.2.1
Stained Glass 14.2.1
Stamp 14.2.1
Standard Deviation 14.2.1 (14.2.1 x001)
STL 14.2.1 (14.2.1 x001)
Sumi-e 14.2.1
Summation 14.2.1 (14.2.1 x001)
Targa 14.2.1
Texturizer 14.2.1
Tiles 14.2.1
Torn Edges 14.2.1
Twirl 14.2.1
Underpainting 14.2.1
Vanishing Point 14.2.1
Variance 14.2.1 (14.2.1 x001)
Variations 14.2.1 (14.2.1 x001)
Water Paper 14.2.1
Watercolor 14.2.1
Wave 14.2.1
Wavefront|OBJ 14.2.1 (14.2.1 x001)
WIA Support 14.2.1 (14.2.1 x001)
Wind 14.2.1
Wireless Bitmap 14.2.1 (14.2.1 x001)
ZigZag 14.2.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Adobe Exchange
Kuler
Installed TWAIN devices: NONEThe interactive manipulations in 3D are quite dependent on the display driver for your video card. I notice yours is a bit out of date:
>gpu[0].DriverDate="20130829000000.000000-000"
It's possible a newer driver may help. Visit nVidia.com to facilitate downloading/installing their latest release.
That said, I've also found Photoshop can get flakey once you start working on 3D stuff. I've had amazing, long sessions where it just worked, and I've had others where it just wouldn't cooperate - doing exactly the same things.
It's then that you start to appreciate the auto-save in the background, but even then once in a while it doesn't auto-recover, so you want to save your work in multiple master files fairly often.
I think the latest version (14.1.2) seems about the most stable for 3D work so far.
-Noel -
I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.
-
I've bought a movie but iTunes crashes while trying to download it. Do you experience the same today?
Can you not sync your iPod with iTunes? That should get the movie onto your computer. Now sync your iPad and transfer the movie?
-
Firefox crashes while logged into Lumosity
This what I related to Lumosity support:
I'm using Mozilla Firefox 22.0 (up to date) with Win7 and IE10 10.0.9200.16618 update version 10.0.6 is in the background (not using it for browsing, etc). I believe Java is involved in gaming, so here is that data: Java Deployment Toolkit 7.0.250.17 10.25.2.17 and Java TM Platform SE7 U25 10.25.2.17 Whether I access Lumosity by email link or directly by the URL, Mozilla is crashing repeatedly, going on days now. It tends to crash with Disillusion very frequently (in other words when I finally get access, it crashes repeatedly). It has crashed on Familiar Faces and Rising Word Bubbles . I wish I could give you a better list - but it seems to crash w/more demanding games. It crashes while loading the game. The progress bar gets one-quarter into the load before it goes down.
I have been sending crash reports to Mozilla. I have looked on line for some answers. Nothing found yet in the way of answers. I have seen that various people (general online chats/forums) are experiencing the crashes and obtaining no answers. If there is more info you need that would help analyze and fix this, please let me know.
I have gone through Mozilla's general help about crashes and have restarted Mozilla in safe mode (no add ons) and I have opted out of using hardware acceleration (permanently). I do not think it's crashed in the safe mode.
My husband uses Lumosity on his computer and his entire computer shuts down. He has the same systems I have only on a PC (mine is a laptop). His Java versions, (Toolkit) - 7.0.60.24 10.6.2.24 Java TM Platform SE7 U610.6.2.24.
I received response from Lumosity and understand that support believes this issue may be due to a compatibility issue with plugins on the new version of Firefox. I also understand that Lumosity depends on Adobe Flash Player, so after discussion w/Lumosity support, I updated my Adobe Flash Player to v. 11.8.800.94. BTW Lumosity support is able to recreate the events w/Firefox and to control them by starting Firefox in safe mode.
I have uninstalled Firefox, deleted the Mozilla folder from the program files as outlined in support info. I did notice that uninstalling Firefox did not uninstall Mozilla Maintenance Service v. 22 7-2-13 333 KB. There were several folders in the Mozilla folder when I deleted it, the Maintenance file being one of them I am sure, and it is now dated today's date, v. 22 at 219kb.
In the process of this, I had notice of Windows updates, so I rebooted the computer to let the updates install. I went back to Mozilla and logged on to Lumosity, opened the game "Disillusion" and it started up fast w/o crashing. However, the very next game I opened, Rising Word Bubbles, it crashed. Twice or so. I opened Mozilla in safe mode and it did not crash when I played one of the games.
I think I have listed everything that I've done. Sure could use some help to fix this. I've even backed up and defragged.
One last thing, I had installed "Memeo Premium Backup" and was having trouble with that program crashing, Windows indicating it would debug and advise (nothing received on that). I am wondering if those problems were also a part of this problem. I have since gone back to "Memeo Instant Backup" which works fine. FYI
Now, I see there is a button to push that will automatically do something. I think I'll copy my notes, just in case. Probably TMI for an auto response anyway.
Help. Thank you!
I typically LOVE Mozilla and spread the word ... oh please let there be an answer. ;)
(Cool, didn't expect the data after I clicked the button and installed. Woo-hoo. Keep on rocking Mozilla.)
Thank you,
JennThanks - I'll go the "safe" route and disable add ons.
-
from the "download recent purchases" on itunes i can seem to be able to access movies, only music, apps and tv series… how can i re download a movie from itunes store that i bought but it crashed while downloading?
If it never finished downloading then, Store>Check for Available Downloads
-
Indesign getting crash while exporting because of bad pdf inside file.
Hi,
My indesing is getting crash while exporting to pdf. I have link to pdf file inside the indesign file, when i export that indesign file to pdf indesign is getting crash without showing any error message. If i place another pdf file in same location then it is going fine and i can able to get the output pdf file. Please suggest me how can i check and correct that pdf file and is there any solution to this. Please help me i have thousands of indesign pages with the same issue. If you want pdf i can send it to your mail id. please i need fix for this problem.
Thanks
KiranFor all of you lurkers, Kiran sent me a copy of the PDF, and it looks like I found the problem (and learned a new technique which may help others in the same boat).
I tried re-frying the file by creating an eps and distilling, but the result was the same, then I tried exporting from CS3, just for fun, and it worked, but I realized the PDF had been cropped, so I started trying differnt sections and isolated an area that failed, though that wasn't particularly helpful.
Acrobat preflight didn't find anything that looked odd or problematic, and then I decided to run Examine Document. It came up with MetaData (no surprise) and also two items under a heading of Deleted and Cropped objects, with no preview or description. I unselected the MetaData from the list of found stuff, them clicked the Remove button in the Examine Document panel, and resaved (and while you have the opportunity to give it a new name, doing so doesn't remove the stuff untill you do the whole procedure again and save with the same name). Placed the new version of the PDF in a new file and exported no problem. -
I�m hoping someone may understand the cause of the LabVIEW crash I�m experiencing.
LabVIEW 6.1 crashes and Windows 2000 says, "LabVIEW.exe has generated errors and will be closed by Windows" when I try to load an llb by clicking on the top-level vi from within LabVIEW or when opening the llb from outside LabVIEW. It crashes while loading particular sub-vi�s of the llb. If I try to load the offending subvi�s directly, I also get the same crash. If I build the llb into an application, the build goes smoothly and the resulting application functions correctly. If I use a �splash screen� approach and do not load the offending sub-vi�s (by not opening vi references to them), they load-up fi
ne when the top-level vi loads and then I am able to edit and re-save any vi of the llb including the offending sub-vi�s. I�ve tried re-saving the llb as a separate development distribution and still get the same crash behavior. I�ve also tried saving the offending sub-vi�s to separate files outside the mother llb (after getting them open with the splash screen approach) and I get the same crash when I open these files. If I save one of the offending sub-vi�s as a separate llb, I can�t get it open even with the splash screen approach. I�ve loaded the latest video driver for my Dell Inspiron 8100 laptop and I get the same behavior on a Dell Dimension 8200 desktop that is also running Windows 2000 (Version 5 SP4). There are 110 objects in my llb that includes *.vi�s, *.rtm�s, and *.ctl�s.. Any ideas as to why/how this is occurring and how I can fix it? Is this a known 6.1 bug that is fixed in 7? Any info would be greatly appreciated. I�ve included my splash screen like loader, f
or what it�s worth. Thanks.
Attachments:
__loadVIs.vi 88 KBThanks for responding. Your understanding is correct. Mass compiling was one of the first things I tried (although I failed to mention it). I also un-installed and re-installed LabVIEW. It crashes during mass compiling of the full llb, although the vi that it appears to be working on when it crashes is not an �offender�, i.e. I can open that vi fine. The crash during mass compiling is the same crash, i.e. Windows says it had to close LabVIEW because it generated errors.
I�ve attached one of the offenders. It is missing many of it�s sub-vi�s so you�ll have to hit �ignore vi� a bunch when opening it. (The llb of it is ~2.6 MB. I thought that might be too big/rude to post.) This vi crashes LabVIEW upon mass compile or upon opening it (after hit
ting �ignore subvi� a bunch).
I was going to attach an llb of another smaller offender, but in the process of editing it to be a little prettier and better documented, the problem kind of vanished for that vi. The main routine still crashes when I mass compile the full llb, but now I can open some of the old offenders without incident. I still can�t open the main routine directly as it crashes LabVIEW. Thanks for your time.
Attachments:
aveParam.vi 769 KB -
Gnome3.2 crash while surfing internet
Gnome3.2 crashed while i use chromium to surf the Internet, then it turned to the login screen. This happens several times.
Here is my .xsession-error file:
/etc/gdm/Xsession: Beginning session setup...
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/tmp/keyring-zRJVLc
GNOME_KEYRING_CONTROL=/tmp/keyring-zRJVLc
SSH_AUTH_SOCK=/tmp/keyring-zRJVLc/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-zRJVLc
SSH_AUTH_SOCK=/tmp/keyring-zRJVLc/ssh
GPG_AGENT_INFO=/tmp/keyring-zRJVLc/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-zRJVLc
SSH_AUTH_SOCK=/tmp/keyring-zRJVLc/ssh
GPG_AGENT_INFO=/tmp/keyring-zRJVLc/gpg:0:1
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 6: yes
common-plugin-Message: checking whether we have a device for 7: yes
common-plugin-Message: checking whether we have a device for 8: yes
common-plugin-Message: checking whether we have a device for 9: yes
common-plugin-Message: checking whether we have a device for 10: yes
common-plugin-Message: checking whether we have a device for 11: yes
common-plugin-Message: checking whether we have a device for 12: yes
common-plugin-Message: checking whether we have a device for 13: yes
common-plugin-Message: checking whether we have a device for 14: yes
common-plugin-Message: checking whether we have a device for 15: yes
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
JS LOG: GNOME Shell started at Thu Oct 20 2011 10:05:30 GMT+0800 (CST)
** Message: applet now embedded in the notification area
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
(gnome-settings-daemon:1137): color-plugin-WARNING **: failed to create directory on startup: Error creating directory: File exists
(exe:1443): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-shell:1185): Clutter-WARNING **: The actor 'uiGroup' is currently inside an allocation cycle; calling clutter_actor_queue_relayout() is not recommended
gnome-session[1112]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gdu-notification-daemon:1199): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gnome-settings-daemon:1137): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 11 requests (11 known processed) with 0 events remaining.
(nm-applet:1212): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
(gnome-screensaver:1208): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
romium/chromium --type=plugin --plugin-path=/usr/lib/mozilla/plugins/libflashplayer.so --lang=en-US --channel=1337.0xb9dc8e70.907823869: xcb_io.c:528: _XAllocID: Assertion `ret != inval_id' failed.
[1337:1337:368300408:ERROR:browser_main_gtk.cc(75)] X IO Error detected
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
(evolution-alarm-notify:1210): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
plugin-container: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
gnome-shell-calendar-server[1227]: Lost (or failed to acquire) the name org.gnome.Shell.CalendarServer - exiting
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
firefox: xcb_io.c:528: _XAllocID: Assertion `ret != inval_id' failed.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Should i provide any other information to solve this problem, please tell me.try to disable record module in xorg settings. I encountered the similar problem sometimes ago, and my gnome desktop stays stable since the modification mentioned below.
Hope this will help.
> cat /etc/X11/xorg.conf.d/10-modules.conf
Section "Module"
Disable "record"
EndSection
Last edited by ybyygu (2011-10-20 05:11:00)
Maybe you are looking for
-
Is it possible to have two Oracle Inventory
Hi, I want to Install Oracle with new OraInventory in Linux - I'm using a User other the Oracle (which has already a inventory and has Oracle Homes associsted) Now I'm trying to install Oracle under user Oracle2, and I don't want this installation to
-
Sound card fails when modem taken out- no longer wo
My OS is Windows 98 First Edition. I recently replaced an internal, PCI slot LT Winmodem and put in a USR internal, ISA slot modem. I didn't follow exact instructions for this sort of change but the Creative website says that one of their sound cards
-
Link Purchase Order to Sales Order
Hey All, I am trying to link a purchase order created via the DI API to a sales order in the B1 system. I set the following fields: B1Document.oDocument.Lines.BaseEntry = B1Detail.BaseDocEntry; B1Document.oDocument.Lines.BaseLine = B1Detail.BaseDocLi
-
Final Cut Pro 10.1.3 - Choose another SAN location
I have just upgraded to 10.1.3 and Final Cut Pro still cannot update ALL my projects and events that are in the Old Final Cut Projects and Events on my 2T My Passport external HD. I get a message that this location - My Passport - is not a valid and
-
Portege P3500: It's possible to start from USB-stick?
Is it possible to start from usb-stick? i have tried to make a bootable usb-stick , and it really worked on my pc at home , but not on the laptop ..bios settings are ok , as far i know (usb-fdd legacy enable , first boot device fdd) where is the prob